Ohsung Electronics URCMX-3000 REMOTE CONTROLLER User Manual I Owners manual

Ohsung Electronics Co., Ltd. REMOTE CONTROLLER I Owners manual

USER MANUAL

EUT Type: RF Transmitter Universal Remote ControlFCC ID: OZ5URCMX-3000Test Report No.: GETEC-E3-05-068 FCC Part 15 Subpart B Class II Permissive ChangeAPPENDIX I : USER’S MANUAL
MX-3000Owners Manual
This remote control was Custom Programmed for you by:For questions about your Custom Programming call:Custom Programming of a complex home theater and/or amulti-room system is one of the most challenging tasks within an audio/video installation. It involves an intimateknowledge of how the components interact and exact detailson the proper sequences of control. Only a Home Theater Master dealer has the requisite experience and training to quickly and effectively customize aremote control for true automated operation.Congratulations on your choice! MX-3000 Owners Manual © 2004 Universal Remote Control, Inc.The information in this manual is copyright protected. No part of this manual maybe copied or reproduced in any form without prior written consent from UniversalRemote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.The information in this manual may be subject to change without prior notice. Home Theater Master is a registered trademark of Universal Remote Control, Inc.Entertainment Made Simple is a trademark of Universal Remote Control, Inc.All other brand or product names are trademarks or registered trademarks of theirrespective companies or organizations.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
TABLE OFCONTENTSCongratulations 1Connecting the Battery Pack 1Using the Charging Base 2Programming the MX-3000 2No More Pointing! 3Operating Your System 4Displaying the Settings Screen 5Adjusting Backlighting 5Adjusting Brightness 5Button Light Settings 5Sound 6Setting Time and Date 6Power Settings 6System 6Pickup Settings 7Calibration 7Factory Default 7Exit 7Maintaining Your MX-3000 8Warranty 8Specifications 8Information To The User 9Warning 9
Page 1MX-3000 COLOR TOUCH SCREENCongratulationsYou’ve purchased a unique synthesis ofhardware and software engineering, theHome Theater Master MX-3000. The twingoals of the design team were to improvethe elegance and usability of touch screensthrough the physical design while providinga new standard in brightness, clarity andanimation for the touch screen itself. Easy OperationBy assigning the important home theater operational buttons to the natu-ral resting place of the end users thumbs, the MX-3000 achieves a newstandard in use and comfort.Automatic BacklightingThe integral motion sensor detects any movement of the touch screen andautomatically backlights the screen. You do not have to press any buttonto display the screen. Any movement of the MX-3000 renews the backlighting. To adjust the backlighting, see page 5.Connecting the Battery PackUnlock the rear cover by using a coin to move the locking screw to theUnlock position.Remove the cover. For shipment from the fac-tory, the battery cable is left unplugged. Plugthe cable into the socket next to the battery.The connector is slotted to prevent plugging itin the wrong way, so don’t force it.Replace the cover and lock it into place witha coin.LockedBattery Cable Plugged InUn-Locked
Page 2MX-3000 COLOR TOUCH SCREENUsing the Charging BasePlug the 5V DC adapter into apower outlet and into the back ofthe charging base.Gently place the MX-3000 into thecradle of the charging base.Push down on the base of the MX-3000 until you hear and feel afirm “click”.The Status light should immediatelylight. Red indicates that it is charging. Blue shows that it is fullycharged. There is no harm in leaving the MX-3000 on its charging basewhenever it is not in use. Programming the MX-3000The MX-3000 is programmed via a windows PC equipped with a USBport (we include a programming cable in the box), using our proprietarysoftware, MX-3000 Editor. You can download this software from our website:www.universalremote.comBasic setup takes only a few minutes with this software. However, to fullyautomate an audio/video system the user must have a detailed knowledgeof how the system is connected and operated. We highly recommend thatyou use a professional audio/video installer to program your MX-3000 ifyou would like to enjoy one touch operation via macros. The MX-3000 on it’s Charging Base.
No More Pointing!The combination of the MX-3000 with it’s companion MRF-250 base station will enable you to place your audio/video components out of sightbehind closed doors and/or in another room of your house. The MX-3000sends radio signals to the MRF-250 throughout your house (50-100’ away,indoors or outdoors). The MRF-250 converts your commands to theinfrared signals that control your A/V components.Page 3MX-3000 COLOR TOUCH SCREEN1. The MX-3000 remote control sends radio waves inevery direction, so you don’thave to point the remote anymore!2. The MRF-250’s built-in Front Blaster sends commands to components in the same cabinet space as the MRF-250.3. Self-adhesive “Flashers” affix to the Infrared sensors on the front panels of your components. The Flashers relay commands to com-ponents out of sight of the MRF-250’s Front Blaster. The flashers plug in to the MRF-250’s rear flasher line outputs via their 10 foot cables.
Operating Your SystemThe MX-3000’s MAIN menu displays the most popular activities anddevices in your system. Press the MAIN button to see the MAIN menu.Large systems may have more than one page. Press the page button if youdon’t see all your devices.Gently press any screen button with your finger to select an activity or adevice. The screen will change to a display of the buttons you need forthat activity/device. The PAGE buttons may reveal additional buttons forsome devices and activities.When you would like to control another device, press the MAIN buttonand select a new device from the MAIN menu.Page 4MX-3000 COLOR TOUCH SCREENThe PAGE buttonsreveal additionalpages of buttonswhen they areavailable.The Volume andMute buttons arealways availableregardless of whatscreen is displayed.To select a touchscreen button,touch the screenwith a gentle tap ofyour finger.The 4 way cursorbuttons enable youto navigate onscreen guides andmenus with ease.The MAIN Button below thescreen always takes you to the firstpage of the MAIN Menu.
Displaying the Settings ScreenYou can adjust the settings of theMX-3000 whenever you like by pressingand holding the MAIN button for fiveseconds. When you do, the screen willchange to the SETTINGS screen. If youdo not press any button on theSETTINGS screen within 30 seconds, theMX-3000 will time out and automaticallyreturn to normal operation.Adjusting BacklightingIf you uncheck the check boxes, the MX-3000 will stay lit until the battery is exhausted. If you check the checkboxes, you can select from the list of delays.The amount of delay you select will be thehow long the MX-3000 stays lit. You can save battery life this way.Adjusting BrightnessSimply touch and drag the brightness sliderto the desired level. Increased brightnessdoes affect battery life.Button Light SettingsYou can opt to conserve battery life, bydisabling the LED lighting behind thebuttons.This is done by pulling down the list box andselecting “always off” from the list.Page 5MX-3000 COLOR TOUCH SCREENThe Settings ScreenThe Backlight ScreenThe Brightness ScreenThe Button Light Screen
Page 6MX-3000 COLOR TOUCH SCREENSoundYour MX-3000 may have been programmedto make sounds. This is optional, and someprofessional installers may prefer to keep itsilent. However, you can adjust the volumeto any level you like by touching and dragging the volume control here.Setting Time and DateYour MX-3000 may have been programmedto display the time or date on a touch screenbutton. If so, you can correct the time displayed by changing the settings on thisscreen.Power SettingsYou can display the remaining charge by selecting Power Settings. You can also adjust when the low batterywarning screen will appear.SystemThe System screen displays data about yourMX-3000’s operating system, memory etc.The Sound ScreenThe Time and Date ScreenThe Power ScreenThe System Screen
Page 7MX-3000 COLOR TOUCH SCREENPickup SettingsYou can set your MX-3000 to only turn onwhen touched, or every time you move it.CalibrationIf you like, you can calibrate where you tapby running the calibration. You will need apen top or PDA stylus to do this. Do notattempt to calibrate using your fingers.Factory DefaultWARNING! Only use this button wheninstructed to by Technical Support. It resetsthe memory of the MX-3000 to the factorycondition. All your programming will be lost! ExitWhen you have finished adjusting Settings,simply tap the EXIT button to return to normal operation.The Pickup ScreenThe Calibration ScreenThe Default ScreenThe Exit Button
Page 8MX-3000 COLOR TOUCH SCREENMaintaining Your MX-3000Be careful not to scratch the touch screen, only use your finger to tapthe LCD touch screen or use a plastic pen top or PDA stylus. Never use areal pen, pencil or any other sharp object on the screen. Keep it away fromextreme cold or heat. The MX-3000 is not waterproof. Do not use it in anylocation that is damp or wet.If you spill water on it, take out the battery pack and let the MX-3000 dry for48 hours before you try powering it up again. If you spill coffee or anotherbeverage on it, clean it with distilled water. Make sure no water gets insidethe MX-3000. The touch screen contains a glass element. Don’t drop theMX-3000 or impact it against anything.Use a soft, damp cloth to clean the screen. If the screen still shows fingerprints, clean it with watered down window-cleaner. Do not use anythingabrasive and don’t use too much water, some might leak into the interior.WarrantyThe MX-3000 is covered against any manufacturing defects or faults inworkmanship for a period of one year from the date of purchase whenpurchased from an authorized Home Theater Master dealer. Units purchased from online auction sites or other unauthorized resellers haveno warranty. This warranty does not cover the following items:Damage from misuse, neglect, or acts of nature.Products that have been modified or incorporated into other products.Products purchased more than 12 months ago.Units purchased from unauthorized dealers or companies.SpecificationsMicroprocessor: 206MHz RISC Memory - 16 Megabytes of RAM (for User Configuration)Devices - Supports up to 255 DevicesPages- Supports up to 255 Pages on each DeviceLearning Capability - Standard frequencies (15kHz to 100kHz)Macro Capability - Up to 255 steps each, however nesting is allowed IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environmentRF Range (radio frequency): 50 to 100 feet, depending upon the environmentRF Frequency: 418MHzWeight: 10.4 oz. (with batteries)Size: 7.17” x 4.76” x 1.18”Batteries: Lithium Ion battery pack included
Page 9MX-3000 COLOR TOUCH SCREENInformation To The UserThis equipment has been tested and found to comply with the limitsfor a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection againstharmful interference in a residential installation.This equipment generates, uses and can radiate radio frequency energyand, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications.However, there is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turningthe equipment off and on, the user is encouraged to try to correct theinterference by one more of the following measures:- Reorient or relocate the receiving antenna.- Increase the separation between the equipment and receiver.- Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.- Consult the dealer or an experienced radio/TV technician for help.WarningChanges or modifications not expressly approved by the manufacturercould void the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.
Page 10MEMO
Page 11MEMO
Page 12MEMO
500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.comOCE-0026A Rev 03

Navigation menu