Ohsung Electronics URCMX Audio/Video Remote Control User Manual

Download:
Mirror Download [FCC.gov]
Document ID	138169
Application ID	8wb9idpm3svZCT4KgZ9/1g==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	200.85kB (2510654 bits)
Date Submitted	2001-02-26 00:00:00
Date Available	2001-03-20 00:00:00
Creation Date	2001-02-26 13:08:36
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	2001-02-26 13:08:56
Document Title	Users Manual
Document Creator	Acrobat 3.0 Scan Plug-in

Home Theater Master
LCD Touch Screen
Preprogrammea and Learning
Remote Control
MX—IOOO
Operating
Manual
wvafi
”MN iiiii
Introduction
Battery Installation
Summary of Operations
A. Description of Devices
B. Prc»pt granted codes
C. Learn ‘
D. Macro Operation
E. Punch Through
F. Editing the buttons on LCD screen
G. Loading program
H. All Other Operations
. LCD Screen and Button Layout 7
r Getting Ready with System Setting — — — 8
. Programming the Remote Control 9
A. Preprogramming Method ' -- . . 9
1) Using a three—digit code number
2) Auto scan with brand names
B, Learning method ~ 12
C. To erase the learned buttons 14
1) To erase a single button
2) To erase all the learned commands in a single device
3) To erase all the learned commands in all twelve device
9°“.—
bum
ssh/via
7. System and Operations Set Up — 16
A. Setting up the system 16
B. Macro and Punch Through Programming 16
B- 1. Macro programming
8-3. To program Macro Functions
83. To erase Macro Functions
C. To pros in Pun‘ch Through Functions 19
CL Pt amming
(2, To Luise Punch Through Functions
8, To litlit the Buttons on LC!) 20
A. To Move buttons 20
B. To Copy buttons 21
B-l, To Copy Creating it Favorite Device pageth/IAINI)
C. To Delete buttons 22
D. To Insert buttons — » ~ — 23
E. To Change buttons 24
F. To Edit a text — . — . fffff 25
9. Clock Setting A -- 26
10. Loading Programs “itlt PC 26
l 1. LCD Screen Alignment — ~ - -- 27
12. LCD Screen Contrast 27
13A Caution on LCD Screen . . ' ,, 28
14. Memory Lock 7 28
15. Erasing all the Programs 28
lo. Warranty 28
l7. Specifications — 29
IS Appendix 29
A. Set up Function Table 30 - 39
B. Set up code Table 40 ~ 53
f (f) - 1
The MX»lOOO is a very powerful and flexible preprogrammed and
learning remote control with LCD touch screens
It is designed to operate up to twelve home entertainment
components. You can program it for your components either from the
preprogrammed code library in the remote control or you can teach up
to 780 buttons into MX- 1000 from your original remote controls.
The MX»1000 has many advanced operating features that can add
convenience and enjoyment of your home entertainment system. It
also allows you to change the button size and shape and edit the text
on the button in the LCD. You can also make these changes with the
aid of your personal computer.
Setting up the MX-lOOO to work with your components is very easy
and simple. Please follow the instructions in the manual and retain the
manual for I’uture reference.
For any questions or comments about tlte MX-lOOO. please contact
Universal Remote Control. lne. 500 Mamaroneck Avenue, Harrison,
NY 10528 at 9l4-835-4484 or email to \V\\=\v,ser\‘ice@urcmx,com
Customer service hours are 9:00 AM to 6:00 PM EST‘ Monday ~
Friday.
MX-lOOO uses four AA batteries. Please be sure to match the
batteries with the (+) and (-) markings inside the battery compartment
during installation.
The remote control goes through self-testing for three seconds after
the batteries are installed and automatically moves to setting mode for
your programming,
NOTE: Please do not mix old batteries with new ones or mix different
types of batteries.
A. Description of Devices:
The MX— [000 is designed to operate up to twelve components. They
are Audio, CATV, Satellite, TV, DVD, VCR], VCRZ, Laser Disc,
Tuner, CD, Tape and AUX. However, the device button name can
be changed to meet your exact needs, You can also create a favorite
device page and transfer the frequently used devices to the favorite
device page in order to change the device button s es and shapes.
Once you create the favorite dcvicc page it will appear as a default
device page. Please refer to COPY in EDITING Section on page 2l
for details.
There are also four pages of the LCD screen for each device and you
can use them to create. delete or edit any functional buttons to
customize with your audio/video components. Please refer to
EDITING on page 20 for details.
B. Pro-programmed Codes:
The MX~IO()() comes with prcprogrammcd codes l'or practically all
the major audio and \ idco equipment that are on the market. You can
operate all ol' .\our components with the NIX-1000 simply by
punching in the lIlI‘QC‘dlgli code number that is assigned to your
brand. The code numbers for various brands and components are
listed in the instruction manual. Please refer to the programming
instruction shown on page 9 lior details.
C. Learning:
The MX-IOOO can also learn practically all the codes from your
original remote controls. There are 50 LCD screens in the remote
control and all the functional buttons in the LCD can be taught. In
addition, there are eleven rubber buttons and a joystick that contains
five functions Each of these buttons and the joystick functions can be
taught in each of the twelve devices. As a whole. you can teach up to
780 new functions into the remote control. Please refer to page 12 in
the instruction manual for details.
D. Macro Operation:
The remote control is capable of sending out a series of commands
with one button press. There are three types of macro buttons you can
use for such macro operations and they are as follows:
1. Ml, M2 and M3 buttons on MAIN page.
Each of these three buttons are designed to send out up to 28 series of
commands you programmed into the buttons. It is typically used to
turn on and turn off all of your A/V components with one button
press,
2. Device buttons on Main page.
There are twelve device buttons on the MAIN page and each of these
device buttons can send out up to 14 commands you programmed into
the device button. It is typically used in sending out audio input codes
so that the audio receiver will make an automatic input switch when
you press the respective device button in the remote control,
3. Favorite Channel buttons.
You can create up to 60 favorite channel buttons in the remote control
by programming the most often uatched channel numbers into these
buttons. Each of these buttons can send out up to 14 commands You
can also use them for any other purpose. Please refer to page 16 of the
manual for programming the macro operations
E. Punch Through.
This is designed to operate audio equipment volume control buttons
( VOLUME UP and DOWN and MUTE ) while all the other buttons
control video equipment. You can also operate transport functions
( PLAY, STOPA REWIND and FAST FORWARD buttons ) from
VCR, DVD, LD. CD or any other mode to operate while all other
buttons in the remote control are operating different components.
You can also make punch through on CHANNEL buttons. Please
refer to page 19 in the manual for details.
F. Editing the buttons on LCD screen.
You can change the size and shape of the buttons on the LCD screen.
You can also create. delete. copy and more the buttons from one
location to another on the LCD. In addition. you can erase and write
your own text with different font sizes on the buttons, This Could be
done directly on the remote control \\ithout a personal computer or
with the aid of personal computer. Please refer to page 20 in the
manual for details.
Gt Loading Program
The MX-lOOO is capable of receiving software programs and data
through the Internet. You can also load programs and data in the
remote control to your personal computer and download them to
another MX~1000. Please refer to page 26 in the manual for details
H. All other operations:
You can set the duration of the hack l' t or the LCD display to stay
on as well 1h low battery “timing level and the "beep" sound level.
Please refer to page 16 in the mantra] l'ur details.
You can also M31 the time date and _\ear that are displayed in the
remote control by l'olluuing the procedures Shown on page 26 of the
manual.
mm." <=.-_-.
”out Munmvu
m Mo
\\_/'
0 Displays the name of the device selected.
8 Dixpluys lhc «lulu and duck
@ Displuyx' pugs number.
El Dlsplalys the device "annex
B LIGHT button
G MACRO bullons,
MAIN DEVICE menu human
[3 LCD Page change button.
9] POWER \
in MUTE
[1] VOLUME
{8 CHANNEL
E Previous channel button.
m TRANSPORT functions(PLAY4 STOPAREWLND and FF) for VCR‘
CD and DVD etc.
{B JOYSTICK buuon(UP< DOWN. LEFT.RIGHT and ENTER)10 move
the cursor and enter the selecliml by pushing down thejoyslick,‘
All the programming is done by firs
PAGE buttons simu
SETTING mode.
Move the cursor on
You can exit the setting mode by simpl} pressing the MAIN button or
bring the cursor to 8. TO EXIT \\ iIh joystick and push the joystick
d ow n
mflmmth-A
. T0 EXIT
SELECT Z
ENTER
tuneously for five seconds to enter the SYSTEM
TOUCH PAD ALIGNMENT
SYSTEMS & OPTIONS :
PREPRBGRAM
LEARNING
EDIT BUTTONS
SET DATE & CLOCK
PROGRAM LOADING
JOY STICKAV E
JOY STICK.
the screen \\ith the joystick to your selection in
the list. Enter the se ection by pushing down the joystick.
(a
t entering the SYSTEM
SETTING mode in the remote control. Press both the MAIN and
You can program the MX- 1000 to make it compatible with all of your
components by following either the preprogramming method or
teaching it with your original remote controls
A. Preprogrmnming Method:
1) Using a three-digit code number.
1. Turn on the component you plan to operate manually.
2. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds
3. Using the joystick. move the cursor down in the LCD screen to
3. PREPROGRAM.
4. Push thejoystick down to enter the preprogramming mode.
5. Select the device on the LCD screen that you wish to program.
(Eg, To program TV. press the TV device button. )
PRESS DEVICE BUTTON
. TO PROGRAM
TO EXIT
6. Select the device from which the three digit code number table will
be selected from. (Eg. If it is from the TV code table, press the TV
device button.)
7. Point the remote control toward the component and enter the three—
digit code number you selected for your component from the code
table on page 40 ~ 53. ( Please enter the code number within 20
seconds of programming.) lfthere is more than one code number
assigned to your brand. try the one code number at a time until you
find the right Code number. ( If you entered the right code number.
the component will turn off right after you entered the number.)
When the right code nutnber is entered. save the code by pressing
the SAVE button on LCD.
,, _ e)
‘Efifii fin new TV
x-
xi< ozg mm:
~< mow -ICI
Eooo
(906069
a@@@
8‘ Confirm than you entered the right Code number that matches your
component by pressing other buttons such as POWER, VOLUME“
MUTE and CHANNEL. If any of the buttons do not operate as they
should. please repeat from Step 5.
9. Continue to progrztm other components by repeating from the
above step 5,
10. Once you completed programming till the devices exit from the
programming mode by pressing both the MAIN and PAGE
buttons simultaneously,
11. You will be in the setting mode once again, More the cursor to
St T0 EXIT and press the cursor down or simply press the MAIN
button to e\it to main menu.
2) Auto Scan uitlt brand names.
You can also program your remote control by brztnd name with the
following steps:
I. Manually turn on the component you plan to operate
2. Go to program setting mode in the remote control by pressing both
the MAIN and PAGE buttons simultaneously for five seconds
3. Using the joystick more the cursor down in the LCD screen to
3. PREPROGRAM.
4. Push the joystick down to enter the preprogram mode.
5. Select the device you wish to program in the LCD screen.
(Eg, To program TVA press the TV device button. )
6. Select the device from which the three digit code number will be
selected from. (Eg, If it is from the TV code table, press the TV device
button.)
673)
NOTE: Confirm that it is the right code number for your
component by pressing other buttons such as POWER,
VOLUME. MUTE and CHANNEL etc. If any of the buttons
do not operate as they should, please repeat from Step 5,
10. Continue to program other components by repeating from Step 5.
11. Once you have completed programming all the devices, exit from
the programming mode by pressmg both the MAIN and PAGE
buttons simultaneously,
12. You will be in the setting mode, Move the Cursor to 8. TO EXIT
and press the cursor down or simply press the MAIN button to exit
to the main menu.
B. Learning Method:
You can also teach uny of the buttons in the remote control except
the MAIN und PAGE buttons with the following steps.
1. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for fin) seconds.
2. Move the cursor to 4‘ LEARNING with the joystick and then push
the joystick down to enter the learning mode.
3. If you nixh to touch tiny ol‘ the tunetionul buttons in the device.
keep the cursor to COMMON BUTTON ttntl select the tleviee that
you “ish to enter, If you \\ ish to tench the twelve device buttons
shown on the LCD press the MUTE button to move the cursor to
the DEVICE BUTTON and select the device on the LCD that you
wish to touch into.
4. Place your original remote control to the NIX-1000 head to head
about 2~3 inches apart as shown below,
,‘4—2"t03"—> . u 0 O GQQ/fi
’ f" o o- Q/‘9
MX-IOOO Original remote
5. Press either the device button or functional button. whichever you
wish to teach in the MX- 1000. It is now ready to learn on the button
you selected.
6. Press the button on your original remote control that you wish to
teach into the MXVIOOO. The MX-lOOO \\ ill "beep" indicating that
it received the signal and the LCD \\'lii show “RETRY”.
( Please enter the code signal within 20 seconds of programming.)
7. Press the same button on the original remote control a second time
to ensure correct learning. The t\'lX~IOOO will beep a second time
with "GOOD" flashed on the LCD screen indicating that it learned
the code correctly. If it flushes "FAIL". repeat from Step 5 until it
learns successfully.
8. Move on to the next button (or device) you \\ish to teach by
repeating front Step 5. If you are teaching functional buttons. you
can also move on to teach the buttons in the next page by pressing
the PAGE button.
9. Once you complete the teaching and wish to exit from the leaning
mode, press the MAlN button to go back to the main page of the
learning mode. Exit from the Main page by pressing both the MAIN
and PAGE buttons simultaneously.
10. You will be in the setting mode once again. Move the cursor to
8. TO EXIT and press down the cursor or simply press the MAIN
button to exit to the main menu.
“Us, ,
emo’i‘e bontrol
C. To Erase the Learned Buttons
1) To erase a single button:
I. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously ("or five seconds.
2. Move the cursor to 4. Learning with thcjoystick and then push the
joystick down to enter the learning mode.
34 Move the cursor to COMMON BUTTON and select the device
that contains the functional button you wish to erase. If you wish to
erase the function in the device button. move the cursor to DEVICE
BUTTON.
sumo" BUTTON
QSELECT DEV|CE BUTTON =
Emovz cunson. more BUTTON j
4. Press the functional button or device button you wish to erase for
three seconds or more and it will flash "ERASED'E Repeat this step
for other buttons you \\ ish to erase.
5. Once you comp eted erasing and wish to exit from this mode,
press the MAIN button to go back to the main page of the learning
mode. Exit from the Main page by pressing both the MAIN and
PAGE’buttons simultaneously,
6. You will be in the setting mode once again Move the cursor to
8. T0 EXIT and press down the cursor or simply press the MAIN
button to exit to the main menu.
2) To erase all the learned commands in a single device:
1, Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds.
2. Move the cursor to 4. Learning with thejoystick and then push the
joystick down to enter the learning mode.
3. Press the MUTE button to move the cursor to the DEVICE
BUTTON and keep the device button you wish to erase all the
learned commands down for five seconds until the LCD shows
ERASED. This will erase the function taught in the device button.
If you continue to press the device button for another five seconds,
it will erase all the functions in the device.
4. Once you complete the erasing and wish to exit from this mode,
press the MAIN button to go back to the main page ofthe learning
mode. Exit from the Main page by pressing the MAIN and PAGE
buttons simultaneously.
5. You will be in the setting mode once again. Move the cursor to
8. TO EXIT and press down the cursor or simply press the MAIN
button to exit to the main menu.
3) To erase all the learned commands in all twelve devices:
1. Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds.
2. Move the cursor to 4. LEARNING with the joystick and then push
the joystick down to enter the learning mode.
3. Press both the POWER and STOP buttons simultaneously for five
seconds in the learning mode, The LCD will show ERASED after
it erased all the learned commands in the remote control.
4. Once you complete the erasing and wish to exit from this mode.
press both the MAIN and PAGE buttons simultaneously
i. You will he in the setting mode once again. Move the cursor to
8.10 EXIT suitl press clown the cursor or simply press the MAIN
button to exit to the main menu
NOTE:
Preprogrammed code will be automatically restored when learned
function is crased.
Go to the program setting mode by pressing both the MAIN and
PAGE buttons simultaneously for five seconds. Move the cursor on
the LCD screen to 2. SYSTEM & OPTIONS with the joystick. Enter
this mode by pushing the joystick down and the following can be
programmed:
A. Setting Up the System.
The LCD screen will list the following choicest
5 BEEP
srnus
2 Liunr
' an 1'th
. LOW aAflEnY
g wmmuu 10m
i MACRO FROG.
PUNCH PHDG.
Rungc Default
Buzzer Status: High. Low. Off High
Back Light On Time: 0 — 120 seconds 20 seconds
LCD on Timei 5 » Ill) seconds 30 seconds
Warnint:v of Low Buttery: l()’,é - SOS? lcwl I0 (70
Select the button you wish to change from the list first Press the UP
or DOWN buttons on the LCD to set them up. Once you set them up.
press the SAVE button to store them.
You will be in the setting mode once again. To return to the main
menu, move the cursor to 8. TO EXIT and press the cursor down or
simply press the MAIN button to exit to main menu.
B. Macro and Punch Through Programming
The MACRO and PUNCH THROUGH can be also programmed in
this mode Press the button you wish to program and follow
procedures shown below:
63 —— . t ,; ;_
B-l. Macro Programming:
There are three type of macro functions you can program. They are as
follows:
1. MI, M2 ttnd M3 in the Mttin menu:
, Designed to send out up to twenty eight L‘otnnutnds from each of the
three buttons.
‘» 2. Twelve device buttons in the Main menu:
Send out up to fourteen commands from catch device button.
3. Favorite Channel Buttons:
‘Yon cztn create and design up to (it) buttons (IS your Favorite Button in
video modes. Eztch l"tt\'orite channel button Cull send out up to
fourteen commands with one button press.
3-2. To Program Macro Functions:
Press MACRO PROGRAM button in 2. SYSTEM & OPTIONS
' MAeno —m-n- “mm.
uEvtcE uunou
Move the cursonon the LCD either to the COMMON BUTTON to
program MI — M3 and favorite channel buttons or to the DEVICE
BUTTON to program the device buttons by using MUTE button.
1) For Ml — M3 Button:
1. Press one o[' the three tnucro buttons. Ml ~ M3. with the cursor
on DEVICE BUTTON.
2. Select functional buttons you wish to store in the macro button.
You can store up to 28 commands.
3. Store the commands you selected to the macro button by pressing
CH (UP) button. To cancel the macro commands. press CH ( DOWN ).
63 f
2) For Device Buttons:
1. Press one of the twelve device buttons you wish to store macro
functions with the cursor on DEVICE BUTTON
2. Move the cursor to COMMON BUTTON and select again either
the same or another device button whose functional buttons you
wish to store in the device macro button you selected first. You
can store up to 14 commands into the device macro buttons.
3. Store the commands you selected to the macro button by pressing
CH (UP) button To cancel the macro commands, press CH ( DOWN ).
3) For Favorite Channel Button:
1. Press the device you wish to program favorite channels with cursor
on COMMON BUTTON.
2. Press one of the favorite channel buttons and enter the channel
number you wish to store in the
FAVORITE channel button, You can store up to 14 commands
3. Store the commands you selected in the Favorite channel button by
pressing Channel UP button. To cancel the macro commands, press
CH < DOWN >.
Once you complete the macro programming and wish to exit, press
both the MAIN and PAGE buttons simultaneously. This will take you
to the setting mode More the cursor to 8. TO EXIT in setting mode
and press the cursor down to exit or simply press the MAIN button to
exit to main menu.
NOTE:
Pressing the Volume Up button during the macro programming will
add a time delay of 0.5 seconds between the commands, Eg‘ Pressing
the Volume Up button twice will cause a pause of 1 second between
the commands where the delay was inserted
B-3. To Erase Macro Functions.
To erase the functions you stored in any of the macro buttons, press
the Channel UP button without entering any commands during the
macro programming mode.
C. To Program Punch Through Functions.
You can use audio receiver volume control in a different mode ( eg.
Audio receiver Volume Up and Volume Down and Mute in Satellite
mode ) using a volume punch through feature. You can also have four
VCR ( or DVD ) transport buttons. Play. Stop. Fast Forward and
Rewind, operate in another mode such as in Satellite, Cable and
Audio modes. You can also make CHANNEL punch through.
C-l Programming:
1. Press PUNCH THROUGH in the LCD screen in 2. SYSTEMS &
OPTIONS mode.
2. Press VOLUME UP button for Volume Punch Through or press
the PLAY button for Transport Punch Through, or CHANNEL up
button for Channel Punch Through.
3. Select the device you wish to punch through to ( lst device ).
4. Select the device you wish to punch through from ( 2nd device ),
5. Repeat from Step 2 to program Punch Through to other devices.
Once you complete the Punch Through programming and wish to
exit. press both the MAIN and PAGE buttons simultaneously. This
will take you to the setting mode. Move the cursor to 8. TO EXIT in
the setting mode and press down the cursor to exit or simply press the
MAIN button to exit to main menu,
C-2. To Erase Punch Through Functions.
Press the same ‘device button in the PUNCH THROUGH T0? and
PUNCH THROUGH FROM? during the Punch Through
programming.
You can add or delete buttons. change the button size and shape,
move the button locations and edit the text on the buttons on LCD
screen in the EDITING Mode.
1. Go into setting mode by pressing both the MAIN and PAGE
buttons simultaneously for live seconds.
2 Move down the cursor in the LCD screen to 5. EDIT BUTTONS
usingjoystick.
3. Push down the joystick to enter the EDITING mode The LCD will
list the lollon mg six choices to Choose item and Select the button you
wish to enter.
2 COPV
5 DELETE
INSERT _
CHANGE
TEXT EDIT
A. To Mme Buttons: a
[his opct; ttion mmes lunctiunul buttons to aim octttion on the I Cl)
screen. It also mines the button liom one page to ztnother nithin the
selected de\ ice.
1. Set the cursor to COMMON BUTTON and select the device you
wish to enter. Select the functional button you wish to move in the
device page and move them with the joystick within the same page or
move to the next page by pressing the PAGE button. Once you
position the button at the location or page you desire. push the
joystick do“ n to sme it.
2. Repeat the ttbme step to continue to mme other buttons in the
same det tee.
3. It. you wish to move buttons in another device. return to the main
menu by pressing the MAIN button and repeat from STEP 1.
4. Once the Operation is completed and you wish to exit from this
mode, return to the main menu by pressing the MAIN button and then
, é).
ffé To Editth
Epsilon LCD
exit from the main menu by pressing both the MAIN and PAGE
buttons, simultaneously.
NOTE: You may first relocate or delete the bttttons that are currently
at the position you plan to locate the new button. However, you can
also relocate or delete the buttons after you superimpose the new
button above them.
The device buttons in favorite device page can be moved. Please
refer to “B -I. To Copy - Create a Favorite Device Page"
B. To Copy Buttons:
You can copy any functional button and move them anywhere in the
LCD screen or to any other 3 pages within the same device mode.
1. Move the cursor either to COMMON BUTTON or DEVICE
BUTTON with the MUTE button.
2. Select the de\ ice you wish to enter.
3. Select the functional button you wish to copy and move it with the
joystick “ithin the s: tmc page or mom to the next page by pressing
the PAGE button Once you position the copied button at the location
ot page you desite. push the Joy stick d0\\n to sine ill
4. Repeat from Step 2 to continue to copy other buttons itt the same
device.
. If you wish to copy buttons to unotltcr device. return to the main
menu by pressing l\li\ll\lllllll01lillltl repent from Step l.
6. Once the operation is completed and you wish to exit from this
mode. return to the mum menu by pressing the MAIN button and then
exit from main menu by pressing both the MAIN and PAGE buttons
simultaneously.
B-l. To Copy - Creating a Favorite Dew ice Page ( MAIN 1 )
You can also create your favorite de\ ice page and transfer the device
buttons you use most often to this page with the following steps:
1. Move the cursor to DEVICE BUTTON with the MUTE button.
2. Select the device you wish to store in your favorite device page.
3. Press the MAIN button. The device you selected will appear in a
favorite page you just created. You can also move the device button
to a different location in the LCD page \\ ith the iovstick in this Stet;
4. Press the joystick down to save the device button you copied.
éD,
5. Repeat Step 2 to Step 4 to copy other device buttons you wish to
store to your favorite device page,
6. Once you completed it, exit by pressing both the MAIN and PAGE
button simultaneouslyt
Note: You may also want to change the size and text of the buttons in
the favorite device page using CHANGE and TEXT EDIT in EDIT
mode, Howeverx the text on the button should be written on the main
device page before the device button is stored in favorite device.
C. To Delete Buttons
You can delete any button on the LCD screen except the twelve
device buttons in the MAIN page with the following steps:
This operation can delete both device buttons in favorite page and
functional buttons with the following steps.
1. Select the functional button you wish to delete in the device page
and push the joystick down for three seconds to delete the button. If
you wish to delete the device button in favorite page. press the MAIN
button and select the device button you wish to delete, Press down the
joystick for three seconds to delete the button.
2. Repeat the above step to continue to delete other buttons in the
same device.
3. If you wish to delete functional buttons in another device, return to
the main menu by pressing the MAIN button and repeat from Step It
4. Once the operation is completed and you wish to exit from the
delete mode. return to the main menu by pressing the MAIN button
and then exit from the tnain menu by pressing both the MAIN and
PAGE buttons simultaneously.
WARNING: The preprogrammed command of the deleted button can
be restored only by creating a button at exactly the same location it
was originally assigned. It can also be restored by clearing the entire
memory in the remote control and a new program is loaded to the
remote control. The learned functions will be lost permanently with
the deletion of the button. Please use caution in deleting the button
GD
877dfdi¢ t
D. To Insert Buttons
This is designed to create new functional buttons in any of the twelve devices.
The following choices of button
sizes and shapes are available:
I. Select INSERT button in EDITING mode.
2. Select the device )ou wish to create as anew button.
3. Move to the page you “ish to CIL‘LllC a new button by pressing the
PAGE btlllOlL Press the CHANNEL UP or DOWN buttons and
various sizes and shapes ol' buttons will appear on the top left side of
the LCD screen
4. Continuc to press IIlC Channel button until tou lintl the button you
\\ ish to use.
5. Move the button you created to the location you wish to position
with the joystick and press the jmstick down to save it in that
location.
6. Repeat from Step 3 to continue to create new buttons in the same
devicet \
7. If you wish to create new buttons in another device return to the
main menu by pr "sing the MAIN button and repeat from STEP 2.
St Once the operation is completed and you wish to exit from this
mode, return to the main menu by pressing the MAIN button and exit
from the main menu by pressing both the MAIN and PAGE buttons
simultaneously
, é? ,
”on; 2m LCD
“3; n; Eartha
E. To Change Buttons
This is designed to change the size and shape of any functional
buttons and device buttons (in lavorite device page) with the steps
shown below:
‘ CHANGE .. The tollowtng choices 01 buttons are
atatlabIe:
uev-cs uurroN
Mm
3-
DVD . LD , TAPE,
, NEE ._t . ,E.,~,.
j fé’ E————J‘(
. 3
, t ,_ .._. C] [j
|M155M2t|M3 I i /
move CURSOR: more BUTTON EVAE7 7 t Q. _
1. Press CHANGE button in EDITING MODE.
2. If you uish to change the functional buttons. press the device that
contains the functional button _\ou mm to change and then select the
l‘nnctional button. If you wish to Change the device buttons in the
. press the MAIN button in main menu and then
favorite device patc
select the tiC\ ice button you \\ ish to change.
3. Al'tet‘ selecting the button )(\ll \\ish to change si/e and shape. press
the CHANN L UP or CHANNEL DOWN button and various sizes
and shapes of buttons will appear on the button you selected.
4. Continue It) press the Channel button until you find the button you
wish to use and press the jo_\stick down to save the shape of the
button.
5. Repeat from Step 3 to continue to change buttons in the same
device.
6. If you wish to change button sizes and shapes in another device,
return to the main menu by pressing the MAIN button and repeat
from Step 2.
7. If you wish to exit from this mode. return to the main menu by
pressing the MAIN button and then exit from the main menu by
pressing both the MAIN and PAGE buttons simultaneously.
é‘ib
8. Tciiz'dit‘t e u onsbn LCD
F. To Edit a Text
This is designed to write a new text on any of the buttons in the LCD
screen with the following steps:
TEXT The I'ollmving choices ol‘ fonts are
ED”, antics 5.1mm . .. ., . . _. _ . _ . . A
to tulttble tn two sues lot text edtting.
_—m
ABCDEFGHIJKLMNOPO
RSTUVWXYZ[A] V_!# %
&' ()*+,—./0123456789
m ..<_>.@
“was
MDVE cunsun: MUTE BUTTON E
1. Select TEXT EDIT button in EDITING MODE.
2. It" you wish to write on the I'unctionul buttons. move the cursor to
COMMON BUTTON with the MUTE button and select the device
you wiin to enter. Select the tunctionttl btttton you wish to write text.
It" you wish to write on the device buttons or on the MI — M3 buttons.
move the cursor to DEVICE BUTTON and select the device button.
3. Alter the selection 01" the button you \\ ish to write. move the cursor
to the i0L‘LlllUIl with joystick to write it text in the button press the
Volume UP or Down button to select the characters you wish to use.
press the Channel UP or Channel Down button to move on to next or
move back to the previous characters. press the PRE CH button to
move to the second line of the text and the POWER button for
different font sizes. You can select font sizes by pressing the POWER
button either before you start to write the characters or after you write
the text. For it space between the diameters. press the PLAY button.
4. Press the joystick down to save the new text on the button you selected.
5. Repeat from Step 3 to continue to change the text on other buttons
in the sumo device.
6. If you wish to change the text in another device. return to the main
menu by pressing the MAIN button and then repeat from Step 2.
7. If you wish to exit from this mode. return to the main menu first by
pr ..ing the MAIN button and exit from the main menu by pressing
both the MAIN and PAGE buttons simultaneously.
é? , ~
Enter the Setting mode by pressing both the MAIN and PAGE button
s simultaneously for five seconds. Move the cursor on the LCD screen
to 6. SET DATE 8: CLOCK by using the joystick. Enter this mode
by pushing thejoystick down.
Press the selection you wish to change from tie LCD screen and
change them using the UP and DOWN buttons.
Once you complete the setting store them by aressing the SAVE
button.
This program enable you to both up load the program to PC as well as
down loud from PC using the cable that are provided.
Move the cursor in the setting mode to 7. PROGRAM LOADING
using the joystick and press it down to enter the mode
Please visit our website
www.hometlteaternmster.com for the further instruction.
QB U
You may need to align the LCD screen after you down load the
program to the MX- 1000.
Enter the Settingy mode by pressing both the MAIN and PAGE button
simultaneously for five seconds. More the cursor on the LCD screen
to l. TOUCH PAD ALIGNMENT with joystick. Press the joystick
down to enter the mode Align the screen by pressing the three points
that nppcnrs on LCD one point an at time.
@ - Press Here (I)
To Align LCD Screen:
Press the three points
using pencil tip.
@ - Press here (2)
To Cancel:
Press Main button.
Press Here (3) - @
The contrast of the LCD screen can be adjusted by pressing either the
CHANNEL UP or DOWN button while holding down the MAIN
button. Release the buttons when you reached the optimal level of
COI'llrElSll

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2001:02:26 13:08:56
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 2001:02:26 13:08:36
Page Count                      : 27

EXIF Metadata provided by EXIF.tools