Ohsung Electronics URCMX650 RF REMOTE CONTROLLER User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. RF REMOTE CONTROLLER EMISSION TEST REPORT

USERS MANUAL

Download: Ohsung Electronics URCMX650 RF REMOTE CONTROLLER User Manual EMISSION TEST REPORT
Mirror Download [FCC.gov]Ohsung Electronics URCMX650 RF REMOTE CONTROLLER User Manual EMISSION TEST REPORT
Document ID711798
Application IDKFuolcBUelPvznd55s/TXA==
Document DescriptionUSERS MANUAL
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize49.04kB (613017 bits)
Date Submitted2006-10-03 00:00:00
Date Available2006-10-04 00:00:00
Creation Date2006-09-29 09:09:58
Producing SoftwareAcrobat Distiller 6.0 (Windows)
Document Lastmod2006-09-29 09:09:58
Document TitleEMISSION TEST REPORT
Document CreatorAcrobat PDFMaker 6.0 for Word
Document Author: 理쒖꽑誘

Test Report No.: GETEC-E3-06-063
FCC Part 15 Subpart C
APPENDIX I
: USER’S MANUAL
EUT Type: Remote Control
FCC ID: OZ5URCMX650
omega
MX-650
Owner’s
Manual
Thank You!
Thank you for purchasing the OmegaTM Pre-Programmed and
Learning Remote Control. This manual is designed to assist you
step-by-step as you setup the Omega to replace all of your
remote controls and automate your home entertainment system.
Omega Owner’s Manual © 2004 Universal Remote Control, Inc.
The information in this manual is copyright protected. No part of this manual may be copied or reproduced
in any form without prior written consent from Universal Remote Control, Inc. UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL. The information in this manual may be subject to change without prior
notice. Omega is a registered trademark of Universal Remote Control, Inc. Power of Simple is a trademark
of Universal Remote Control, Inc. All other brand or product names are trademarks or registered trademarks
of their respective companies or organizations.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
Table of Contents
Getting Started
Button Layout
Basic Setup
Pre-Programmed Method
Learning Method
Volume Control Punch Through
12
Advanced Operation
14
Advanced Setup
16
Editing Button Labels
16
Macro Button Setup
19
Favorite Channel Setup
21
Hiding and Adding Pages
23
Erasing
25
Cloning One Omega to Another
26
Recalling Pre-Programmed Settings
27
Utilizing Optional RF Base Stations
28
IR/RF Signal Setting
31
ID # - Setting Base Station Address
33
EMITT - Setting IR Emitter Outputs
34
BLAST - Setting the Front Panel Blaster On or Off
35
Pre-Programmed Code Tables
37
Frequently Asked Questions
57
Warranty
57
Specifications
57
The Omega
Getting Started
Congratulations!
You’ve purchased one of the most advanced and easy to setup control systems available. The Omega’s built-in library includes thousands of different
brands and models of remote controls. In most systems, all you have to do
to setup the Omega is enter which brands and models you own. If you
own a component too new to be in the library, the Omega uses advanced
learning technology to quickly set each Omega button, one at at time.
Setting up your Omega to replace all your existing remote controls can be
done in a few minutes. Basic Setup is described on pages 5 to 13.
The Omega’s exciting advanced features automate and customize operation in many ways. You could use Macro Setup to power on all of your
components and start the show with the press of one button! With the
Omega’s unique Favorite Channel capability, you can tune in a channel
with the press of one button instead of entering the entire channel number.
Any of the button names on the display can be edited as you like. It is best
to delay any Advanced Setup (described on pages 14 to 36) until after you
finish Basic Setup.
Battery Installation
Remove the battery compartment cover by pressing up the cover lock.
Insert four AAA batteries into the battery compartment as shown in the
diagram.
- +
+ +
+ -
Universal Remote Control, Inc.
Button Layout
Transmitting
“Busy” Signal
Indicator*
TITLE
POWER
OFF
Button
POWER
ON
Button
LIGHT
Button
Screen
Labeled
Display
Buttons
Screen
Labeled
Display
Buttons
PAGE
Numbers
PAGE
Buttons
change the
page of
Display
Buttons.
FAVORITE
CHANNEL
Button
MAIN
Button
takes you
to the
MAIN
Menu.
FUNCTION
Buttons
*Note: When a command, macro or favorite channel is being transmitted, an icon will appear
in the top right corner of the display. While the Omega is “busy”, it will ignore a button push.
The Omega
Selecting a New DEVICE Changes
All Button Commands Instantly
The Omega can operate twenty different devices even though it is only
one remote control. Let’s try it now! Press the MAIN button, then press
the TV DEVICE button.
TV
DEVICE
Button
MAIN
Button
The top of the screen changes from MAIN to TV. Now all of the buttons
change their function to operate a TV. Press the PAGE button. Watch the
labels of the display buttons change with each press. There are four
pages of display buttons already labeled for TV operation. To operate
another component (e.g., VCR, DVD etc.), press the MAIN button to
return to the MAIN menu. The MAIN menu displays ten of your Devices
on the screen. Simply press one of the screen-labeled Device buttons to
operate another device. If you don’t see the device name you want, then
use the PAGE buttons to display the remaining ten devices on page 2 of
the MAIN menu.
Light Button
Press the LIGHT button to backlight all the buttons. To turn off the backlighting, press the LIGHT button again, or just wait ten seconds (the backlighting automatically shuts itself off).
LIGHT
Button
Universal Remote Control, Inc.
Basic Setup
You can start setting up your Omega using either the Pre-Programmed
Method or the Learning Method. However, all the buttons of the Omega
are setup at once with the Pre-Programmed Method, so it is usually faster
than the one-button-at-a-time Learning Method.
Pre-Programmed Method
Power on the A/V component you wish to setup, so that you can test
codes by sending power off commands.
Refer to the pre-programmed code tables on pages 37 - 52 and
write down the code numbers listed for your A/V component. The
code numbers are listed by categories of devices, then by brand.
See page 37 for a category list. Code tables with model numbers
are available at www.universalremote.com in the MX-650 area.
Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds. The top of the display will show “SETUP”.
You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don’t press a button within that time, the Omega will time out and return to
normal operation.
MAIN
Button
ENT
Button
The Omega
Press the P-PRO button to select the Pre-Programmed Method.
P-PRO
Button
The display changes so that you can select which Device button to
setup.
Press the
Page button
to display
the other ten
Device
names.
First ten
Device Names
Press the device button you’d like to setup.
The bottom of the display will now flash “FROM TABLE”.
Universal Remote Control, Inc.
In this step you select which code table to use. Thus, you can program a device named “TV” with codes from the CABLE code tables
and a device named” VIDEO” with codes from the TV code table.
If you don’t see the code table you need, press the PAGE buttons to
reveal the other page of code table categories, then select the code
table you want to use.
Note: Each name that appears in the display may include several types of
components. For example, the AUX category includes many types of custom installation devices. See page 37 for a list of component types each
Code Table contains.
Point the Omega at the component, then enter the first three digit
code number from your notes using the numbered buttons. After
you enter each three digit number, look at the component to see if
it turned off.
Use the
number
buttons to
enter the
code
number.
Continue to enter code numbers until the component turns off.
For Example: I have a Sony TV. I found the code numbers 070, 139,147,
126, 185, 194 and 085 under Sony in the TV TABLE. Using the numbered
buttons on the Omega, I entered 070 and looked at the TV. It didn’t turn
off, so I entered 139, then 147 and so on, until I found the code that powered off the TV.
The Omega
Note: If a component fails to turn off after you have entered all of the code
numbers listed for your brand, your component might actually be manufactured by another brand. You can scan through the other brands in the
table using the UP and DOWN buttons to change the code number displayed, then tapping either the Power ON, OFF or any other button to see
if the component responds to any command. Alternatively, you can opt to
use the Learning Method on Page 9 if you can’t find a code set in the builtin database.
Press Power On
or Power Off to
test if the device
powers off.
Scan Up to the
next Code
Number
Scan Down to the
previous
Code Number
When the component turns off, save the code number you entered
by pressing the SAVE button that appears on the screen.
Code Number You
Entered
SAVE
Button
Exit SETUP mode by pressing the MAIN button two times. When
the display shows “MAIN”, you are back in normal operating
mode.
MAIN
Button
Universal Remote Control, Inc.
10
Repeat steps one through nine for each of your devices. Test all the
commands you’ve programmed. If you are missing any commands,
use the learning method, described next:
Learning Method
The Omega can learn commands from your old remote controls onebutton-at-a-time on any button of any device, on the MAIN or FAV LCD
buttons or on the MAIN hard buttons, by following these simple steps:
Line-up the Omega with your old remote control, head-to-head,
one or two inches apart.
On the Omega, press and hold the MAIN and ENT (Enter) buttons
at the same time for approximately three seconds. The top of the
display will show “SETUP”. You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If
you don’t press a button within that time, the Omega will time out and return to
normal operation.
Press the LEARN button.
LEARN
Button
The top of the screen will change to “LEARN”.
The Omega
The display will show a list of the first ten devices. If you would like
to teach a command to a device on Page 2, press the PAGE button.
Select the device you would like to teach commands to by pressing
the Device button.
Press the
Page button
to display
the other ten
Device
names.
First ten
Device Names
You’ve selected the Device you want, no select any button you want
to teach a command to (if it is on another page, press the page button).
Press any Button.
Note: The only buttons you can’t
teach IR commands are the
PAGE, MAIN and FAV buttons.
Once you press a button, the top of the display will change from
“LEARN” to “READY”.
10
Universal Remote Control, Inc.
Press and hold the button you want on your old remote control until
the display changes to either “GOOD” or “FAILED”.
If the “GOOD” label appears on top of the display, you were successful.
Now, press the next button you wish to teach. Keep repeating steps 6
through 7 until you have learned all the buttons you want.
If the “FAILED” label appears on top of the display, try to teach the
same button in Omega once again by repeating steps 6-7.
Continue to teach any commands from any of your remote controls
by repeating steps 5-7 (to go back to step five, press MAIN once).
Once you completed teaching all the buttons, return to normal operation by pressing the MAIN button twice. Test all your new commands.
If any of them don’t work, try learning again using these notes:
Move to another room. Plasma TVs, sunlight, halogen or
quartz lighting can interfere with the learning process.
Although the old remote control seems to work fine,
change the batteries to fresh alkaline batteries.
Vary the distance between the remote controls
gradually. Try 1/4”, 1”, 2”and so on, up to 4 feet.
Tap the button on the original remote control instead of
pressing and holding it during the learning process.
11
The Omega
Volume Control Punch Through
In most home entertainment systems, the sound volume is only controlled by one device. In some systems, it is the TV speakers that make
the sound, so you would use the TV device on the Omega to raise and
lower the volume. In another system, it might be a surround sound
receiver and speakers that control the sound, so you would use the
Omega’s AUDIO device to adjust the volume. Constantly switching the
Omega to TV or AUDIO to adjust the volume is inconvenient in daily
life.
You can use Punch Through to set the Omega’s volume buttons to
always control the sound in your system. That way when the Omega is
set to VCR or DVD, the volume up, down and mute buttons will work
perfectly without switching back to AUDIO or TV. Here’s how:
Enter Setup mode by pressing and holding both MAIN and ENT for
three seconds. The top of the display show you are in SETUP mode
now.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the PUNCH button.
Press the VOL button. The display confirms by displaying “VOL” at the
top of the screen. This sets up the group of three buttons (Volume Up,
Volume Down and Mute) in one action!
Select the
Select the VOLTransport group
UME group (Vol
(Play, Pause,
Up, Down & Mute)
Stop, Rew, FFwd)
Select the MENU
group (Menu, Guide,
Info, Exit, Up, Down,
Left, Right, Sel)
Select the
CHANNEL group
(Channel Up,
Channel Down
and PREV CH)
Select the POWERgroup
(ON and OFF)
The bottom of the display flashes ”PUNCH TO”.
12
Universal Remote Control, Inc.
Press the device button for the device that doesn’t have volume
control commands yet (i.e.,DVD). This is the device you are going
to PUNCH TO for the volume and mute commands.
Press the
Page button
to display
the other ten
Device
names.
Select
the Device
you want to
“Punch To”
Note: If you wish to PUNCH to the MAIN device, press the POWER OFF
button at this time.
The bottom of the display will then flash “PUNCH FROM”. Now
you select the device that has the volume commands you want
(i.e.,TV for systems using the TV speakers, AUDIO for systems with
surround sound receivers). The bottom of the
display will flash “SAVED”.
Repeat steps 3-5 until all your devices operate the volume perfectly. Press the MAIN button twice to return to normal operating
mode and test your Punch Through settings.
Note: The Punch Through feature is not limited to
volume and can also be applied to channel or other functions. If you find
yourself switching to a particular device frequently to use a group of controls, consider using Punch Through for another group, as listed here:
POWER - Power On and Power Off
MENU - Menu, Guide, Info, Exit and the four cursor buttons.
VOL - Volume Up, Volume Down and Mute
CH - Channel Up, Channel Down, Previous Channel, all of the numeric
PLAY - Play, Stop, Pause, Rewind and Fast Forward
13
The Omega
Advanced Operation
Setting Backlight Options
You can adjust the amount of time that the Omega backlight stays on by
entering the SETUP mode, then pressing the LIGHT button on the display. Then enter the amount of time you would like the light to stay on
using the number pad (0-99 seconds). After making your selection, press
the SAVE button.
If you don’t want backlighting at all (this extends battery life), press the ON
button that appears on the screen. The ON will change to OFF. Press the
SAVE button. Exit the setup mode by pressing the MAIN button.
The FAV Button
When you press the FAV button, the display changes to a list of your
favorite TV channels. Each button can be set to instantly select the channel
on your TV. There are five pages of ten favorite channel buttons for a total
of 50. Simply touch the PAGE or the FAV button to display the other pages
of favorite channels. To return to the last device you viewed, press MAIN
once (a second press will take you to the MAIN menu).
Favorite
Channel
Buttons
FAV
Button
To setup your Favorite Channel buttons go to page 21.
14
Universal Remote Control, Inc.
Adjusting Contrast
You can make the text darker by pressing both the MAIN and cursor UP
buttons at the same time. To make the text appear lighter, press both the
MAIN and cursor DOWN buttons at the same time.
MAIN
Button
Cursor
Up & Down
Buttons
Contrast set low.
Contrast set high.
Transmitting (Busy Signal) Icon
When a command is being transmitted, an icon will appear in
the top right corner of the display. It is a useful aid when setting
up Macros and FAVs, since it flashes with every step of a
sequence of commands.
15
The Omega
Advanced Setup
After you’ve finished all your basic setup, you can choose to make operation easier by customizing the Omega just the way you want, using the
Advanced Setup features described in this section.
Editing Button Labels
You can change the name of any of the display buttons (including
Favorite Channels) by following these steps:
Press and hold both the MAIN and ENT (Enter) buttons for approximately three seconds. The top of the display will show “SETUP”.
You are in SETUP mode now.
Note: You have 30 seconds to perform a step while you are in SETUP mode. If you don’t
press a button within that time, the Omega will time out and return to normal operation.
Press the EDIT button.
EDIT
Button
The display changes to the EDIT menu. Press the TEXT button.
TEXT
Button
Note: The screen displays the list of devices and “EDIT” will appear
at the top of the screen.
16
Universal Remote Control, Inc.
Navigate to the device and page where there is a button label you
want to EDIT, selecting between the FAV, MAIN, DEVICE, then
using the PAGE button. Press the button you wish to edit. The first
character of your button label blinks.
Blinking
Character
EDIT flashes
at the bottom
of the screen.
Change the character by
using any of the number
keys. Each press of the
same number button selects
the next character of that
number’s group, as shown
here.
G,H,I,3
A,B,C,1
D,E,F,2
J,K,L,4
M,N,O,5
P,Q,R,6
S,T,U,7
V,W,X,8
Y,Z,9
Once the character you
want appears, move to the
next space by pressing the
RIGHT cursor button.
UP Cursor
button deletes ALL text.
LEFT Cursor
button
moves blinking
character left.
RIGHT Cursor
button
moves blinking
character right.
DOWN Cursor
button deletes the currently
blinking character.
17
The Omega
When you are finished editing the button, press the button you
edited and “SAVED” will flash at the bottom of the display.
To change any other button labels on the same device, press the next
button, then repeat steps 5-7. If you wish to edit a button on another
device, press the MAIN button once, then repeat Steps 3-7.
Once you’ve finished editing buttons, press the MAIN button four
times to return to normal operation.
Edit the MAIN Menu Title or a MAIN Menu Device Label
You can change the title of the MAIN Menu or a MAIN Menu device
label by following these steps after you’ve entered TEXT Edit mode
(described in the steps one through four in the preceding pages).
Once you’ve entered TEXT Edit mode, the top of the screen displays
EDIT and the first ten devices of the MAIN Menu. There are five
pages you can access via the Page UP or DOWN buttons. When the
top of the screen says EDIT, pressing a device button jumps to the pages for
that device so that you can edit a device’s LCD buttons normally. However,
if you continue to tap the Page button, the top of the screen will change
from EDIT to MAIN. While it says MAIN, there are two pages of LCD buttons. The first two list the Devices of the MAIN Menu and enable you to
change the device names when pressed. The last page titled MAIN has only
one entry for the LCD buttons; “MAIN”. When you press the corresponding
hard button, you can relabel the MAIN title to the room the Omega controls.
Select the title to edit by pressing the adjacent hard button.
Edit the text (described on steps 4 and 5 on page 17).
Press the button you edited to save the changes. Here’s an example:
Each of the MAIN menu
device buttons has been custom labeled for the activities
the user likes to use in the
DEN. Unused devices are
renamed with spaces and
the pages of the unused
devices are hidden so that an
accidental press of a blank
button does nothing.
The MAIN Menu title
has been changed to
DEN, so whenever the
MAIN button is
pressed, the user is
reminded that this is
the DEN remote.
18
Universal Remote Control, Inc.
Macro Button Setup
Imagine turning on your TV, your DVD player and your surround sound
receiver by pressing a single button on your Omega! What would normally take three remotes and three button pushes, the Omega can
accomplish with the press of one button. We call that a “Macro”. Any
of the Display buttons, the Power On or the Power Off buttons (on any
Device or Page) can be set to be Macro buttons!
To setup a macro button, follow these easy steps:
Enter the SETUP mode by pressing and holding both MAIN and
ENT for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the MACRO button. The top of the display will show
“MACRO”. The bottom of the display will flash “SELECT”.
Navigate to the Device and Page where there is a button you would
like to set as a Macro button using the MAIN, DEVICE, and PAGE buttons.
Advanced Options:
If you wish to set one of the DEVICE buttons as a macro, on step 3, tap the
Page button until the top of the display changes to MAIN. Using the PAGE
button you can navigate to MAIN page 1 or page 2 before going on to Step 4.
Another option for DEVICE button macros is to only send the macro if the button is pressed and held. This is setup by entering a delay as the first step of the
macro. The amount of delay determines how long the user must press the button before the macro is sent. The advantage of this option is that a normal
press of the DEVICE button will simply switch devices without issuing the
macro.
Press the button you want to set as a Macro button. The top of the
screen will display the label of the button you selected. At the bottom of the screen it displays “STEP0”, indicating that no macro
steps have been entered yet.
19
The Omega
Navigate to the Device and Page that has a button you want in your
macro using the MAIN, DEVICE and PAGE buttons. Then press the
button with the command you want. Whenever a button is pressed,
another Macro step is counted and displayed at the bottom of the
screen.
Don’t worry about the number of steps. Each macro button can
store up to 190 steps, so you are not likely to run out of steps!
Note: You can program delays in between commands by pressing the
PAUSE button. Each press adds half a second to the delay.
Press the Channel UP button to SAVE your macro. The screen
returns to the SETUP menu.
Press the MAIN button twice to return to normal operation.
20
Universal Remote Control, Inc.
Favorite Channel Setup
Imagine surfing all your favorite channels, without ever typing in a
channel number. By simply setting up each of the favorite channel buttons, you can make TV, cable or satellite operation fun and easy. To
setup a Favorite Channel button, follow these steps:
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the FAV display button.
FAV
Button
The top of the display will show “FAV”. The bottom of the display
will flash “SELECT”.
Use the PAGE or FAV buttons until you can see the name (i.e., ABC,
CBS, NBC) of the favorite channel you wish to setup.
Press the favorite channel button you wish to setup. The top of the
screen changes to show the channel name. The bottom of the
screen displays “STEP0”, indicating that you have not entered the
channel number yet.
Press either the TV, SAT or CABLE Device button (select the device you
use to enter channel numbers).
Press each of the number buttons for the channel.
Note: Some brands of television (for example: SONY) require an
ENT(Enter) command after the channel numbers for the favorite macro to
work correctly.
21
The Omega
Note: If a number is repeated when setting the channel (for example,channel
“33” or “522”) it is usually best to set a half second delay in between the
identical numbers by pressing the PAUSE button. Each press of the PAUSE
button increases the delay by a half second.
Use the PAUSE Button to set
delays between steps, each press
of the pause button increases the
delay by a half second.
Press the Channel UP button to SAVE your macro. The screen
returns to the SETUP menu.
Press the MAIN button twice to return to normal operation.
22
Universal Remote Control, Inc.
Hiding and Adding Pages
Each of your Omega Devices contains up to four pages (if a page has no
IR data, it will be HIDDEN). However, you can HIDE any page from the
users view. A hidden page still appears in SETUP modes, so can be used
in macros. If you change your mind and would like the user to see a
hidden page, you can ADD them.You can add or hide pages on devices,
or on your favorite channel pages using this simple process:
Note: Be sure to program your Macros before you hide pages with a potential macro step in them. You can’t access hidden pages during macro setup.
However, after you finish Macro setup, you can hide pages without affecting operation of your macros.
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the EDIT button.
EDIT
Button
Press the PAGE button.
PAGE
Button
“PAGE” appears at the top of the screen.
23
The Omega
First, choose whether you would like to edit the MAIN, Device or
FAV pages. Then use the PAGE button to navigate to the page you
want to edit.
ADD/HIDE
MAIN
Pages
ADD/HIDE
Device
Pages
Note:You can
ADD/HIDE
FAV Pages by
selecting
PAGE
DEVICE, then
Button
pressing the
FAV button.
When you select a page, the top of the screen indicates whether you
want to “ADD?” or “HIDE?” the page displayed. When you would
like to change a page’s visibility, press the LIGHT button.
This page is hidden. This page is visible.
To ADD it, press the To HIDE it, press the
LIGHT button.
LIGHT button.
You can continue to ADD or HIDE pages on other devices by repeating Steps 4 and 5.
When you are finished adding and hiding pages, press the MAIN button four times to return to normal operation.
24
Universal Remote Control, Inc.
Erasing
You can erase an individual button with a learned command, a macro
or a favorite channel. You can erase an entire Device’s learned command or macro buttons. You can also erase ALL your learned commands on all devices or all your macros or favorite channels everywhere. If you really want a fresh start, it is possible to reset everything to
the factory default condition.
Erasing Learned Buttons, Macros or Favs
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the ERASE button.
Press either the LEARN, MACRO or FAV button.
The following screen appears:
ALL — If you press ALL, the Omega displays a SURE? button. After the
SURE button is pressed, all the buttons will be erased.
DEVICE— If you press DEVICE, a list of Devices will appear. Press the
device button that you wish to erase. The bottom of the screen
will flash ERASE twice, then ERASED.
KEY— If you press KEY, you’ll have to navigate to the Device and Page
you want using the MAIN, DEVICE and PAGE buttons. Press a
button to erase it. The bottom of the display will flash ERASE
twice, then ERASED.
To return to normal operating mode, press the MAIN button four
times.
25
The Omega
Erasing the Entire Omega
To erase EVERYTHING, press and hold both the MAIN and the STOP
buttons for 15 seconds. After 15 seconds, the RESET screen appears.
Press the SURE button to erase all of your settings and return to the factory default setup.
PROG Button
erases three digit
ALL Button
codes, Page, Text
erases all
and Punch
settings.
Through settings.
Cloning One Omega to Another
If you own two or more Omega, you can copy and transfer all the setup
from one Omega to another. Just follow these easy steps:
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the CLONE button.
Press the RECV display button on the new Omega you would like
to setup by cloning.
Press the SEND display button on the Omega you previously setup.
Press the START button on the new Omega and then press the
START button on the Omega you previously setup.
Align the two Omega head-to-head, about an inch apart.
Note: Cloning typically takes about 40 seconds.
After completion, the cloned Omega will flash “GOOD”.
Return to normal operation by pressing the MAIN button twice.
26
Universal Remote Control, Inc.
Recalling Pre-Programmed Settings
If you didn’t write down the code numbers you setup your Omega with,
you can recall them via this simple process:
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the RECAL button. The display changes to the first page of the
four recall screens. Press the PAGE button to see the other pages.
PAGE
Button
Write down the code numbers as they appear.
Return to normal operation by pressing the MAIN button twice.
27
The Omega
Utilizing Optional RF Base Stations
You can use the Omega as you would your other remote controls. It transmits very powerful line-of-sight output using infrared light commands
(invisible to the naked eye). When you point the Omega at the components, expect the range to be between 30 and 50 feet. When the remote is
not pointed in the general direction of the components, the range will vary
(depending on reflective surfaces, lighting, etc.).
However, the Omega also sends radio signals in every direction. By purchasing the MRF-100 or the addressable MRF-250 or MRF-300 base stations, you can operate your equipment with the Omega 50 to 100 feet
away (through walls, doors, cabinets, inside or outside). Since the RF Base
Station picks up the Omega's radio signals from any direction, regardless
of distance, the Omega doesn’t have to be pointed!
Using MRF-250 or MRF-300 Addressable Base Stations
By installing an MRF-250 or MRF-300 base station you gain freedom from
interference from a nearby room, house or condo where someone else
might be using an RF remote control. Addressable base stations are
assigned one of 15 unique ID#’s. This allows multiple equipment locations in one house to be controlled by any Omega. In operation it’s simple:
when you select a device located in the Den, the Omega only talks to the
base station in the Den. When you select a device located in the Family
Room, the Omega only talks to it!
When used with an MRF-250 or MRF-300 base station, the Omega can be
programmed to control identical components, for example, a media room
array of TV’s . The intelligent routing of the MRF-250 or the MRF-300 base
station will send your commands only to the TV you want to control. The
other identical TV’s will not receive commands. Of course, if your system
utilizes identical satellite receivers, cable boxes, VCR’s or disc changers
you can utilize IR routing just as easily for them. If you have more than six
identical components, up to 15 addressable MRF-250’s or MRF-300’s can
be installed to control them (thus allowing up to 90 identical components
in one house).
Note: The Omega's radio signals will not control components directly.
Components that came with "no pointing" radio remote controls cannot
be operated by the Omega unless the component can be switched to standard
infrared control via its internal menus. Some remote control ceiling fans are
radio only and cannot be operated by the Omega.
28
Universal Remote Control, Inc.
The Omega sends radio signal to
the MRF-100, MRF-250 or the
MRF-300 RF Base Stations.
The RF Base Station converts radio signals to standard infrared commands and sends them out via a
built-in front blaster and/or the flashers to components. The blaster is useful when a number of components are in the same cabinet shelf space.
Self-adhesive “flashers” (included with the MRF-250 or the
MRF-300) affix to the front panels of your components. The
flashers relay infrared commands to components out-of-sight of
the front blaster. The flashers plug into the rear flasher line output jacks. Each flasher has a 10’ cable to easily reach components on nearby shelves.
29
The Omega
RF Settings Overview
The Omega is factory set to ID#0. Although this will work with any base
station set to ID#0, it does not allow any emitter or blaster configuration.
Before changing any emitter or blaster settings, you must reset the ID# to
an address other than 0.
By setting the RF addresses for each device you can operate identical
devices (like a stack of satellite receivers, cable boxes, or an array of identical TV sets). You do this by assigning a valid ID#, then selecting a particular IR Emitter Output via EMITT settings. To ensure that the identical components are not affected by line of sight commands, you set the IR/RF for
the device to RF Only.
Many components with on-screen GUI’s (guides, menus etc.) are extremely sensitive to IR overload/saturation. The best way of positioning emitters
for these devices is to set the IR/RF setting to RF only and to set the EMITT
to a specific line output, not the default setting of ALL.
Here are the factory default RF settings of the Omega:
IR/RF (Type of Signal) - All devices are factory set to send both an IR line of
sight signal and an omnidirectional RF signal.
ID# (Base Station Address) - All devices are factory set with ID #0.
EMITT (IR Emitter Line Output) - All devices are factory set to output IR commands through ALL IR Emitter Line Outputs.
BLAST (Base Station Front Panel Blaster) - The blaster is factory set to be on.
Testing for Interference - When ID#0 is set on the bottom of the base station, the
STATUS LED will flicker if interference is present. Once the base station is moved to
a location where the LED does not flicker, the ID# can be changed to one of the
valid addresses (1-9 or A-F).
Changing the RF Settings
Enter SETUP mode by pressing and holding both MAIN and ENT
for three seconds.
Note: You have 30 seconds for each step, otherwise the Omega will time
out automatically.
Press the PAGE button until page two of Setup is displayed (RF is the
only choice on Page 2).
30
Universal Remote Control, Inc.
Press the RF button.
RF Button
The RF Settings Menu appears. See the notes on the following
pages for more info on each option. Make your selection by pressing the button you want:
Signal (IR,
RF or Both)
Base Station
ID #
Emitters - ALL
or a specific
Emitter
Blaster - Turn
the Blaster
On or Off
Exit this Menu
After you’ve made a new setting and SAVED your change, use the
EXIT button to return to the Setup menu. Use the MAIN button to
return to normal operation.
IR/RF Signal Setting
You can set the signal to be IR line-of-sight only, RF only or IR and RF
simultaneously. Additionally, you can set the signal the same way for ALL
ten of your devices OR you can set the signal differently for each device
(the plasma TV could be set to be IR line-of-sight only, while the DVD
player and the Satellite receiver are set to be RF only). A good reason to set
the signal to RF only is to prevent too much IR being sent to a sensitive
component from two arrivals at the front panel (one directly from the
Omega, one from the RF base station). A good reason to set the signal to
IR only is that another room has an MRF-100 base station (no RF address)
so it will receive commands from the Omega unless it is set to IR only.
31
The Omega
From the RF Settings Menu, select IR/RF.
Decide whether you are changing the Signal for all devices or just
one of the devices of the Omega.
Select ALL to change the signal settings to
ALL devices in the Omega. Then, go to Step
4.
Select DEVIC to change the signal settings to
just one of the devices in the Omega. Then,
go to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF settings, then go to Step 4.
Page Button
displays the
other page
of devices.
Select a device
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
Change IR from ON to OFF.
Change RF from ON to OFF.
Save the new setting
Exit this Menu without changing
the IR/RF settings
32
Universal Remote Control, Inc.
ID # - Setting Base Station Address
When you are installing a system within 100 feet of another equipment
location in the same home OR near a home, condo, yacht or motor
home that might potentially have an RF remote control of any kind, it is
recommended that you use an addressable base station and set the
address as described here.
You can operate up to 15 different equipment locations, each with an
MRF-250 or MRF-300 assigned a unique Receiver ID#. You program
each or all of your Omega devices to the appropriate equipment location by assigning the corresponding ID# in the RF Settings Menus.
From the RF Settings Menu, select ID#.
Decide whether you are changing the ID# for all devices or just one
of the devices of the Omega.
Select ALL to change the ID# for ALL devices
in the Omega. Then, go to Step 4.
Select DEVIC to change the ID# for just one
of the devices in the Omega. Then, go to Step
3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change the ID#,
then go to Step 4.
Select a device
Page Button
displays the
other page
of devices.
33
The Omega
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
Displays the
current ID#
Save the new setting
Change ID#
using UP and
DOWN buttons
Exit this Menu without changing the
IR/RF settings
EMITT - Setting IR Emitter Outputs
The MRF-250 and MRF-300 Base Stations enable you to route or
steer the IR commands from any Device to any or all of the IR
Line Outputs. This allows you to control identical devices using
the exact same IR commands (such as an array of television sets
in a media room or a stack of identical satellite receivers installed
in a central location with one satellite receiver dedicated to each
room with a television). Each button push (or macro step) is routed to the specific IR Line Output you’ve assigned to a device. In
the factory set default settings, the Omega is set to route IR commands from any device to ALL IR Line Outputs simultaneously. To
change the Omega default settings follow these steps:
From the RF Settings Menu, select EMITT.
Decide whether you are changing the Emitter settings for all devices
or just one of the devices of the Omega.
Select ALL to change the Emitter settings to
ALL devices in the Omega. Then, go to Step
4.
Select DEVIC to change the Emitter settings
to just one of the devices in the Omega.
Then, go to Step 3.
34
Universal Remote Control, Inc.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change the
Emitter settings, then go to Step 4.
Page Button
displays the
other page
of devices.
Select a device
Select the new setting by pressing the desired button, then press
SAVE to save your new setting and return to the RF settings menu.
Displays the
current IR line
output
Save the new setting
Change the IR
line output
using UP and
DOWN buttons
Exit this Menu without changing the
EMITT settings
BLAST - Setting the Front Panel Blaster On or Off
The MRF-250 and MRF-300 Base Stations have a configurable
front panel high power IR LED or “blaster” for controlling components in the same cabinet space without emitters attached to their
front panel. The front panel blaster can overpower or saturate the
sensors of some A/V components, so if intermittent operation
occurs, the blaster should be turned off.
The blaster is incompatible with a stack of identical components,
since all components will receive IR commands at once, no matter what device is selected. Turn off the front panel blaster by following the steps described on the next page:
35
The Omega
From the RF Settings Menu, select BLAST.
Decide whether you are changing the Blaster for all devices or just
one of the devices of the Omega.
Select ALL to change the blaster settings to
ALL devices in the Omega. Then, go to Step
4.
Select DEVIC to change the blaster settings to
just one of the devices in the Omega. Then,
go to Step 3.
The display changes to a list of the names of your devices. If you have
two pages of devices, pressing either of the page buttons will display
the other page. Select the device you would like to change IR/RF settings, then go to Step 4.
Page Button
displays the
other page
of devices.
Select a device
Select the new setting by pressing the desired button, then press SAVE
to save your new setting and return to the RF settings menu.
Changes the current front panel
BLASTER setting
Save the new setting
Exit this Menu without changing the
EMITT settings
36
Universal Remote Control, Inc.
Pre-Programmed Code Tables
The Omega’s Pre-Programmed code library is divided into categories (TV, VCR,
AUX, etc.). Each category actually includes many types of components. For
example, the VCR category includes TV/VCR combo units.
Within each category, the code numbers are listed in rows by brand
(Sony, Panasonic, B & K, etc.). Some brands have more than one three
digit code for you to try. Just circle the correct row and refer to it while
you setup (step-by-step instructions for using Pre-Programmed codes are
found on page 5).
TV
TVs, Plasmas, Projectors and Monitors
Pages 38-40
CABLE
Cable TV Descramblers/Tuners
Pages 40-42
DVD
DVD Players, TV/DVD Combos, TV/DVD/VCR Combos,
Pages 42-45
DVD/VCR Combos, DVD Recorders, and Laser Disc Players
VCR
VCRs and TV/VCR Combos
Pages 45-47
AUDIO
Amps, Preamps and A/V Receivers and XM Radios
Pages 47-50
SAT
Satellite Receiver
Pages 50-51
CD
CD Players and Changers
Pages 51-53
DVR
Digital Video Recorders (TiVo, Replay)
Page
53
LIGHT
Lighting Systems
Pages
53
AUX
Multimedia PCS, Xbox, iPod and Custom
Installation Products
Pages 54-55
WEBTV Internet Browsers for TV
Page
TAPE
Page 55-56
Tape, Cassette and Reel to Reel recorders
37
55
TV - TVs, Plasmas, Projectors and Monitors
BRAND
ADMIRAL
ADVENT
AKAI
AMARK
AMPRO
AMSTRAD
ANAM
AOC
APEX DIGITAL
AUDIOVOX
BARCO
BLAUPUNKT
BOXLIGHT
BROKSONIC
CAIRN
CANDLE
CAPEHART
CETRONIC
CITIZEN
CLASSIC
CONCERTO
CONTEC
CORONADO
CRAIG
CROWN
CURTIS MATHES
CXC
DAEWOO
DAYTRON
DELL
DIBOSS
DREAMVISION
DWIN
DYNASTY
DYNATECH
EIKI
ELECTROHOME
EMERSON
EPSON
ESA
FISHER
FUJITSU
FUNAI
FUTURETECH
GATEWAY
GE
GOLDSTAR
GRUNDIG
HALL MARK
HANNSPREE
HITACHI
HP
HYUNDAI
INFINITY
INFOCUS
INSIGNIA
JBL
CODE NUMBERS
072 081 161 160
247
197 146 248
112 143
073 167 157 183
052
043 054 056 080 112 131
197 004 112 058
006 310
076 103 273
233
088
266
238
201
197 002 003 004
058
043
197 002 003 004 043 101 103 143
043
004
043 050 051
143
043 054
043 143
197 101 004 143
043
004 016 043 044 076 103 114 125 127 143 269
004 143
319 320 321
329
235 312 313 314 343 344 345
177 226 257
043
062
187
024 076 143 196
197 004 005 028 043 047 048 050 051 076 096 143 151 153 154 155
324
323
007 057
198 223 219 246 299 346 396
028 043 052
043
242 268
197 008 009 034 056 073 074 130 144 155 160 161 165 004 091 157 183
004 102 106 112 113 116 119 127 143
220 083
004
381
004 009 010 011 012 023 075 143 158 163 166 072 221 250 311 361 380
316 327 378 379
337 338
164
230 330 331 332 333 252
350 399 400 401 402 403
164
38
TV - TVs, Plasmas, Projectors and Monitors
BRAND
JCPENNEY
JENSEN
JVC
KEC
KENWOOD
KLOSS
KMC
KNOLL SYSTEMS
KTV
LG
LODGENET
LOEWE
LOGIK
LUXMAN
LXI
MAGNAVOX
MARANTZ
MATSUI
MAXENT
MEMOREX
METZ
MGA
MINERVA
MITSUBISHI
MTC
NAD
NEC
NIKEI
NUVISION
ONKING
ONWA
OPTOMA
OPTONICA
ORION
PANASONIC
PHILCO
PHILIPS
PHILIPS/MAGNAVOX
PIONEER
POLAROID
PORTLAND
PROSCAN
PROTON
PROTRON
QUASAR
RADIO SHACK
RCA
REALISTIC
ROCTEC
RUNCO
SAMPO
SAMSUNG
SANYO
SCEPTRE
SCOTT
CODE NUMBERS
197 004 008 009 024 030 065 101 143 156 160
013
034 038 070 083 145 199 210 240 241 244 245 317 318
043
197 070
002 059
143
230
197 043 143 154
363 364 365 243 284 283 286
072
222 223 224 164 322
072
004
166 007 015 052 081 160 164
197 003 004 022 059 060 061 063 064 127 160 164 094 226
197 164 184
164
242
007 072 004
088
197 004 024 028 042
088
004 024 028 040 042 109 124 146 191 225 267 300 348
197 004 062 101
015 025
132 130 134 197 040 016 024 056 019 236 237 262 272 281
043
351
043
043
249 265 270 360
019 081
096
034 056 080 092 164 208 261 296 295 297 298 377 383
197 003 024 056 059 060 063 064 164 004
197 003 004 005 038 059 093 164 127 184 206 259 260 264 274 294
239
197 018 023 025 116 135 190 203 204 209 234 237 334 335 336 374 385
393 397
352 353 354 355 356 357 358 388
004 143
144 160 161 165 167
004 058 131 143 171 173 193 392
392 398
034 056 092
019 043 143 004 127
160 161 165 065 156 144 197 004 023 024 056 074 152 333
007 019 043 047
186
168 169 178 179 180 181 182 183 073 157 340 341 342 395
197 058 004 202
258 275 309 375 384 004 050 089 101 105 127 143 160 211 228 229 253
254
166 007 020 053 057 082 187 266 347
276
004 028 043 048 143
39
TV - TVs, Plasmas, Projectors and Monitors
BRAND
CODE NUMBERS
SEARS
SELECO
SHARP
SHERWOOD
SIEMENS
SIGNATURE
SIM2
SOLE
SONY
SOUNDESIGN
SPECTRICON
SSS
SUPRE MACY
SVA
SYLVANIA
SYMPHONIC
SYNTAX OLEVIA
TANDY
TATUNG
TECHNICS
TECHWOOD
TEKNIKA
TELEFUNKEN
TELERENT
TERA
THOMPSON
TMK
TOSHIBA
TOTEVISION
UNIVERSAL
VIDEO CONCEPTS
VIDIKRON
VIDTECH
VIEWSONIC
VIZIO
WARDS
WESTINGHOUSE
WINBOOK
YAMAHA
YORK
YUPITERU
ZENITH
ZONDA
015 030 004 007 028 057 143 094 160 082 165 166
189 200 212 227 205
170 081 019 028 029 014 004 022 143 175 214 251 306 307 308 326
349
088
072
205 200 313
231 232
277 278 279 070 085 139 147 126 185 194 207 213
004 028 003 043
112
004 043
002
328
197 003 059 060 063 064 164 044 160 127 052
052
376 394
081
056 062
034 080
004
002 003 004 024 028 043 072 101 143
037 046 086 087
072
172
215
004
287 288 289 290 291 292 293 315 237 325 382 007 015 030 040 062 101
138 216 230
143
008 009
146
174 184 188 192 340 342
004
271 242 389 390
386 387
004 008 009 019 028 060 061 063 064 072 074 143 164 034
076 280
339
197 004 370 371 372 373
004
043
072 073 095 103 157 183 217 243 282 283 284 285 286
112
CABLE - Cable TV Descramblers/Tuners
ABC
ADELPHIA
ADVANCED NEWHOUSE
ALTRIO
AMERICAST
ANTRONIX
ARCHER
ARMSTRONG
AT&T BROADBAND
103 003 004 039 042 046 053
043 074
043
043
099
014
005 007 014
074
074
40
CABLE - Cable TV Descramblers/Tuners
BRAND
ATLANTIC BROADBAND
BELL SOUTH
BLUE RIDGE
BRESNAN
BRIGHT HOUSE
BUCKEYE COMM
CABLEVISION
CENTURION
CENTURY
CHARTER
CITIZEN
COGECO
COMBANO
COMCAST
COMSAT
COMTRONICS
COX DIGITAL CABLE
DIGICABLE
EAGLE
EASTERN
ELECTRICORD
GEMINI
GE
GENERAL INSTRUMENT
GNC
GOLDEN CHANNEL
HAMLIN
HITACHI
INSIGHT
JERROLD
M-NET
MAGNAVOX
MASSILLON
MEDIA ONE
MEDICOM
MEMOREX
MOTOROLA
MOVIE TIME
MOXI
NCTC
NOVAPLEX
NSC
OAK
PACE
PANASONIC
PARAGON
PHILIPS
PIONEER
PRUCER
PTS
PULSAR
RCA
RCN
RECOTON
REGAL
REGENCY
RODGERS
CODE NUMBERS
043 074
099
043 074
074
043 110
074
108 043 074
092
007
043 074
007
074
080 081
110 043 074
074
030
043 074
101
020 030 040
057 066
032
008 054
072
103 002 003 004 008 009 010 069 074 104
099
030
049 050 055
103 055
074
103 002 003 004 008 009 010 069 074 104 109 110
037
010 012 064 079 094
074
107
074
052
103 002 003 004 008 009 010 069 074 104 109 110 111
028 032
111
074
092
015 028 038 071
031 037 053
043 074
044 047
052
006 012 013 020 085
103 034 051 063 076 105 043
059
011 071 074
052
047
074
098
049 050
057
043
41
CABLE - Cable TV Descramblers/Tuners
BRAND
SAMSUNG
SCIENTIFIC ATLANTA
SEREN
SERVICE ELECTRIC
SHAW
SIGECOM
SIGNAL
SIGNATURE
SL MARX
SONY
SPRUCER
STARCOM
STARGATE
SUSQUEHANNA
TADIRAN
TIMELESS
TIME WARNER
TOCOM
TOSHIBA
UNIKA
UNITED CABLE
UNIVERSAL
VIDEOTRON
VIEWSTAR
WIDE OPEN WEST
ZENITH
CODE NUMBERS
030
003 011 041 042 043 045 046
043
074
074
043
030
103
030
108
047 078
002 004 008 009
008 030 097 104
043 074
030
030
043 074
039 040 056
052
007 014
004 053
005 007 014 032 035
043
012 015 018 086 087 088 089
043 099
052 060 093 100
DVD-DVD Players
ADCOM
AIWA
ALPINE
APEX DIGITAL
ARCAM
CALIFORNIAAUDIO
CAMBRIDGE AUDIO
CARYAUDIO DESIGN
CINEVISION
CLASSE
COBY
CYBER HOME
DAEWOO
DENON
GATEWAY
GE
GRADIENTE
GRUNDIG
GO VIDEO
HARMAN KARDON
HITACHI
FUNAI
ILO
INSIGNIA
INTEGRA
JVC
KENWOOD
157
136 146
098
087 111 112 115 116
122
021 124
215 216
174
219
167
258
133 227
132
007 080 138 173 181
175
026 027
021
083
137 091 217 218 219 220 221 222 224
084 140
101
143
268
143
142 180 192 280
012 168 203 212 257
123 151
42
DVD-DVD Players
BRAND
KISS
KLH
KRELL
LECSON
LEXICON
LG
LITEON
MAGNAVOX
MALATA
MARANTZ
MCINTOSH
MEMOREX
MERIDIAN
MINTEK
MITSUBISHI
MYRYAD
NAIM
NAD
NAKAMICHI
ONKYO
OPPO
PANASONIC
PHILIPS
PIONEER
POLAROID
PRIMARE
PROCEED
PROSCAN
RCA
RJTECH
ROTEL
SAMSUNG
SANSUI
SANYO
SENSORY SCIENCE
SHARP
SHERWOOD
SONY
SYLVANIA
SYMPHONIC
TAG MCLAREN
TEAC
THETA DIGITAL
THOMPSON
THULE
TOSHIBA
VENTURER
VINC
YAMAHA
ZENITH
CODE NUMBERS
179 279
135
104
126
148
091 057 074
264 265
096 066 143
267
083 105 201 202
125
163
153
111
017
134 102
226
088 155
103
076 035 180
266
021 042 138 139 144 150 198 199 205 259
066 095 105 166 176
023 092 099 107 108 131 162 172 178 213 232 272
233 234 235 236 237
193 194
086
026 027
026 027
269
204
056 070 119 137 159 165 170 200 254
154
147
217 222 223
094
245 246 247 248 249 250
033 118 126 145 160 189 190 191 238 239 240 241 242 243 251 252 253
261 262 263
143
143
156
270
023
026 027
177
035 034 128 141 130 164 183 184 185 186 187 188 214
149
161
042 089 066 158 166 195 196 197
057 074 091 182
DVD-TV/DVD Combos
AIWA
FUNAI
INSIGNIA
146
143
143
43
DVD-TV/DVD Combos
BRAND
SAMSUNG
SYLVANIA
SYMPHONIC
TOSHIBA
CODE NUMBERS
165
143
143
130
DVD-TV/DVD/VCR Combos
MAGNAVOX
PANASONIC
SYLVANIA
TOSHIBA
143
144
143
164
DVD-DVD/VCR Combos
GO VIDEO
PANASONIC
PHILIPS
POLAROID
SAMSUNG
SANSUI
SONY
TOSHIBA
ZENITH
137 218
150
105 (VCR Functions for VCR 067)
234
137 159
154
145
141
091 (VCR Functions for VCR171)
DVD-DVD Recorders
GATEWAY
GO VIDEO
ILO
KISS
LITEON
PANASONIC
SENSORY SCIENCE
SONY
TOSHIBA
175
220 221 222
268
279
265
139
222
191
188
DVD - Laser Disc Players
DENON
FUNAI
KENWOOD
MAGNAVOX
MARANTZ
MITSUBISHI
NAD
OPTIMUS
PANASONIC
PHILIPS
PIONEER
RADIO SHACK
RCA
REALISTIC
RUNCO
206 207
120
152 013
032 121
211
121
121
049 013
113
032
106 117 121
120
002
049
127
44
DVD - Laser Disc Players
BRAND
SANYO
SHARP
SONY
TECHNICS
THETA DIGITAL
TOSHIBA
YAMAHA
CODE NUMBERS
075
152 013
053 110
113
032
152 106
043 129
VCR - VCRs
AIWA
AKAI
AMPRO
ANAM
AUDIO DYNAMICS
BROOKSONIC
CANON
CAPEHART
CRAIG
CURTIS MATHES
DAEWOO
DAYTRON
DBX
DYNATECH
ELECTROHOME
EMERSON
FISHER
FUNAI
GE
GO VIDEO
GOLDSTAR
HARMAN KARDON
HITACHI
INSTANTREPLAY
JCL
JCPENNEY
JENSEN
JVC
KENWOOD
LG
LLOYD
LXI
MAGIN
MAGNAVOX
MARANTZ
MARTA
MATSUI
MEI
MEMOREX
MGA
MINOLTA
MITSUBISHI
MTC
MULTITECH
NEC
034 161 169
016 043 046 124 125 142 146
072
031
012 023 039 043
035 037 129
028 031
108
003 040 135
031 041
005 007 010 065 108 110 111 112 116 117 119
108
012 023 039 043
034 053
059
005 006 017 025 027 029 031 034 035 036 037 046 101 116 129 131 138
153 162
003 008 009 010
034
031 063 072 107 109 144 147
132 136 155 040 115
012 013 020 101 106 114 123
012 045
004 018 026 034 043 063 137 150 160 013
031
031
012 013 015 040 066 101
043
012 031 043 048 050 055 060 130 150 152 166 172 173
014 048 034 047
171
034
003 009 017 034 106
040
031 034 041 067 068 156 164
012 031 067 069 156
101
027 030
031
003 010 014 031 034 053 072 101 102 134 139
045 046 059
013 020
013 020 045 046 051 059 061 142 151 049 168
034 040
024 034
012 023 039 043 048
45
VCR - VCRs
BRAND
CODE NUMBERS
NORDMENDE
OPTONICA
ORION
PANASONIC
PENTAX
PHILCO
PHILIPS
PILOT
PIONEER
PORTLAND
PULSAR
QUARTZ
QUASAR
RADIO SHACK
RCA
REALISTIC
RICO
RUNCO
SALORA
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHINTOM
SIGNATURE
SONY
SOUNDESIGN
STS
SYLVANIA
SYMPHONIC
TANDY
TATUNG
TEAC
TECHNICS
TEKNIKA
THOMAS
TMK
TOSHIBA
TOTEVISION
UNITECH
VECTOR RESEARCH
VICTOR
VIDEO CONCEPTS
VIDEOSONIC
WARDS
YAMAHA
ZENITH
043
053 054
025
066 070 083 133 140 145 157 163 074 167
013 020 031 063
031 034 067
031 034 054 067 071 101 156
101
013 021 048
108
072
002 014
066 145 075
123
013 020 041 107 109 140 144 145 147 034 040 158
003 008 010 014 031 034 040 053 054 101
058
148
014
032 040 066 102 104 107 109 112 113 115 120 122 125
022 043 048 135
003 007 010 014 134 102
017 037 112 129 131
003 008 009 010 013 014 081 101 017 073 112
031 054 149 159 165
024
034
003 031 052 056 057 058 076 077 078 149 154
034
013
031 034 059 067
034
010 034
039 043
034 039 043
031 070
019 031 034 101
034
006
008 013 042 047 059 079 082 112 131 081 170
040 101
040
012
048
012 034 046 141
040
003 013 017 024 031 034 040 053 054 131
012 034 039 043
034 048 056 058 072 080 101 171
VCR - TV/VCR Combos
DAEWOO
EMERSON
FUNAI
GOLDSTAR
005 117
153
034
101 123
46
VCR - TV/VCR Combos
BRAND
HITACHI
JCPENNEY
LG
LLOYD
MAGNAVOX
MEMOREX
PANASONIC
PHILIPS
RADIO SHACK
RCA
SEARS
SONY
SYLVANIA
SYMPHONIC
THOMAS
ZENITH
CODE NUMBERS
034
101
101 123
034
034 067
101
070 167
034 067
123
034
101
057 154
067
034
034
034
AUDIO - Amps, Preamps and A/V Receivers
ADC
ADCOM
AIWA
AKAI
AMC
AMEND
AMX
ANGSTROM
ANTEX ELECTRONICS
ANTHEM
ARAGON
ARCAM
ATLANTIC TECHNOLOGY
AUDIO ACCESS
AUDIO ALCHEMY
AUDIO CONTROL
AUDIO DESIGN ASSOCIATES
AUDIO EASE
AUDIO FILE
AUDIO MATRIX
AUDIO RESEARCH
AUDIO SOURCE
AUDIO TECHNICA
B&K
BOSE
BOSTON ACOUSTICS
BRYSTON
CAMBRIDGE AUDIO
CARVER
CARYAUDIO DESIGN
CASIO
CHIRO
CINEMA SOUND
CITATION
CLASSE
CLARION
007
082 092 225 161 269 355 356 366
018 104 170 202 203 213 211 188
138 189
038 125 126 127 128 258 281 282
054
196
142
588
335 336 337 338 339
157 158 042 043 081 112
141 325 418 419 504
342
147
135
448 572
194 221 011
021 196 207
071
167
399 406 423 424 425 426
273
134
096 097 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312
313 314 315
070 170 224 347 409 459 460 532 548
447
023 551
522 523 524 525
006 027 028 061 071 201 214 226 180 185 022 029 077 284
443 519
076
140
034 134
148 272
410 411 484 537 538
026
47
AUDIO - Amps, Preamps and A/V Receivers
BRAND
COLORADO VNET
COMPAQ
CURTIS MATHES
DELPHI
DENON
EIGER
ELAN
EAD
ESCIENT
FANFARE
FISHER
FLEXTRONICS
FOSGATE
GE
GOLDSTAR
HAFLER
HARMAN KARDON
HITACHI
IMERGE
INKEL
INSIGNIA
INTEGRA
JAMO
JBL
JCPENNEY
JEFF ROWLAND
JENSEN
JVC
KEF
KENWOOD
KINERGETICS
KLH
KLIPSCH
KNOLL
KOSS
KRELL
KYOCERA
LEXICON
LINN
LUXMAN
LXI
MAGNAVOX
MARANTZ
MARK LEVINSON
MCINTOSH
MCS
MERIDIAN
MICRO LAB
MICROMEGA
MITSUBISHI
MONDIAL
MOTOROLA
MUSICAL FIDELITY
CODE NUMBERS
539
382
076
415 515
002 034 109 215 229 230 027 037 234 259 316 330 340 341 349 350 353
396 400 401 402 422 444 564 568 569
149
057 290 371 468 469 470 471 472 473 474 475 476 477 481 482 483 508
509
099 098 466 467
368 381 393 451 452 453 454
352
047 214 180 182 297
378
062 231 342
056 260
008
174
231 233 254 153 154 118 121 227 277 317 318 329 365
020
371
197
589
354 371 438 439 440 441 442 486 487 586
398
263
076 216
206
058
240 163 191 114 266 279 291 389 390
530
026 066 145 146 181 190 197 192 182 199 151 222 180 005 280 319 320
367 374 412 413 414 420 517 550
220 140
331
157 158 042 043 081 112
531
216 573
150 072 321 376 384 497 498 499 500
007
120 235 236 237 324 357 358 359 360 361 362 363 364
124 377
137 139 052 165 115 004 009
076 056
086 164 152 208
006 028 031 040 063 185 186 251 265 119 289 326 327 328 385 488 489
490 491 492 493 563
322
238 286 496
076
100 012 013
394
119
242 243 204
157 158 042 043 081 112
386
407 408
48
AUDIO - Amps, Preamps and A/V Receivers
BRAND
MYRYAD
NAD
NAIM
NAKAMICHI
NEC
NILES
NIRO
NUVO
ONKYO
OPTIMUS
OUTLAW
PANASONIC
PARASOUND
PASS LABS
PHAST
PHILIPS
PIONEER
PLINIUS
POLKAUDIO
PRIMARE
PROCEED
QUAD
RCA
REALISTIC
REQUEST
ROKU
REVOX
ROTEL
RUSSOUND
SAMSUNG
SANSUI
SANYO
SCOTT
SEARS
SHARP
SHERWOOD
SIMAUDIO
SLIM DEVICES
SONY
SOUNDESIGN
SOUNDSTREAM
SOUNDMATTERS
SSI
STS
SUGDEN
SUMO
SUNFIRE
TAEKWANG
TAG MCLAREN
TEAC
TECHNICS
THETA DIGITAL
THULE
TOSHIBA
CODE NUMBERS
276 293 455 456 457
186 113 283 478 479
533 534 535
111 244 245 172 183 287 323 450
176
403
343
404 405
017 046 064 107 108 187 079 080 090 179 209 270 275 438 439 440 441
442 486 487 536 552 586
026 041 138
342
032 195 219 177 292 383 516
129 130 132 261 294 295 333 334 553 554
431
196
249 250 251 063 119 296
014 033 039 044 045 050 069 159 168 116 035 078 198 397 480 513 518
520 521 542 543 544 545 546 547
458
029 514
461 462 463 464 465
144 268
526
010 048 117 156 067 288
019 056 073 075 095
351 511
506 507
162
074 083 085 501 502 503
379 391 392 445 446 527 528 529
016 571
040 048 110 119 065 228
047 059
019 091
076
026 051 094 131 175 181
024 038 055 102 103 105 106 051 030 388 447 562
449
512
018 084 093 223 247 248 160 166 015 101 184 218 271 353 369 372 380
395 417 421 574 575 576 577
036
084 088
375
068
007
430
171
344 345 346 494 495
138
387
005 019 049 111 212 217
122 176 193 219 178 177 200 257 262
136
505
060 087 198 278 510
49
AUDIO - Amps, Preamps and A/V Receivers
BRAND
TURTLE BEACH
WARDS
XANTECH
YAMAHA
YBA
ZENITH
CODE NUMBERS
416
180
508 509
026 253 169 067 173 205 264 232 089 274 285 332 373 427 428 429 432
433 434 435 436 437 540 541 557 558 559 560 561 565 566 567 578 579
580 581 582 583
485
143 210
AUDIO - XM Radios & Tuners
AIWA
BOSE
DELPHI
FANFARE
KENWOOD
POLKAUDIO
SONY
170
170 532
415 515
352
550
514
380
SAT - Satellite Receivers
ALPHASTAR
AMPLICA
BIRDVIEW
BSR
CABLEVISION
CAPETRONICS
CHANNEL MASTER
CHAPARRAL
CITOH
CURTIS MATHES
DISH NETWORK
DIRECTV
DRAKE
DREAM MULTIMEDIA
DX ANTENNA
ECHOSTAR
ELECTROHOME
EURO PLUS
EUROSAT
EXPRESSVU
FORCE
FORTEC STAR
FUJITSU
GE
GENERAL INSTRUMENT
GOI
HITACHI
HOME CABLE
HOUSTON TRACKER
HTS
HUGHES
HYTEK
HYUNDAI
123
050
129 113 051 126
053
148
053
013 014 015 018 036 055
008 009 012 077
054
050
122 167 168 184 185 186 187 188
173
005 006 007 010 011 112 116 141 052
191
024 046 056 076
038 040 057 058 093 094 095 096 097 098 099 100 122 167 168 184 185
186 187 188
089
114
114
122
176
177 178
017 021 022 027 133 134
151 106 150
003 004 016 029 031 059 101 148
122
139 140
080 044 029
033 037 039 104 057 051
122
068 154 161 162 165 166
053
149
50
SAT - Satellite Receivers
BRAND
ICR
JANIEL
JERROLD
JVC
KATHREIN
LEGEND
LG
LUTRON
LUXOR
MACOM
MARANTZ
MEMOREX
MITSUBISHI
MOTOROLA
NEXT LEVEL
NEXTWAVE
NORSAT
PACE
PANASONIC
PANSAT
PERSONAL CABLE
PHILIPS
PL
PRESIDENT
PRIMESTAR
PROSAT
PROSCAN
RADIOSHACK
RCA
REALISTIC
SAMSUNG
SATELLITE SERVICE
SKY
SONY
STARCAST
STAR CHOICE
SUPERGUIDE
TEECOM
TOSHIBA
TOWN & COUNTRY
UNIDEN
VIEWSTAR
VOOM
WINEGARD
ZENITH
CODE NUMBERS
023
060 147
148
122
108
057
170
132
144 062
010 059 063 064 065
152 153
057
068 154
148 171
148
028 124 125
069 070
143
142 060 160
121 172
117
071 152 153 068 154 156
023 026
019 102
110 030
072
151 106 150
148
151 106 150
043 074
155 123 163 169 175
028 035 047 085
164 171 174
103 104
041
148
020 124 125
023 026 075 087 088 090 107 130 137
002 127 157 158 068 154
023 026
016 025 042 043 044 045 048 049 078 079 080 086 101 135 136
115
148
128 146
081 082 083 084 091 120 159
CD - CD Players and Changers
ADCOM
AIWA
AKAI
AMC
AMEND
ARCAM
AUDIO ACCESS
AUDIO EASE
062 042
059 012 065 088 089 105 122 170 187
085 195 202
231 232
118
238
119 147
165
51
CD - CD Players and Changers
BRAND
AUDIO TECHNICA
BSR
CALIFORNIAAUDIO
CAPETRONIC
CARRERA
CARVER
CASIO
CARYAUDIO DESIGN
CLASSE
CLARINETTE
CREEK
CROWN
DENON
EMERSON
FISHER
FRABA
GENEXXA
GOLDSTAR
HAITAI
HARMAN KARDON
HITACHI
INKEL
INTEGRA
JCPENNEY
JENSEN
JVC
KENWOOD
KOSS
KRELL
KYOCERA
LOTTE
LUXMAN
LXI
MAGNAVOX
MARANTZ
MCINTOSH
MCS
MEMOREX
MISSION
MITSUBISHI
MITSUMI
MODULAIRE
MONDIAL
MUSICAL FIDELITY
MYRYAD
NAD
NAIM
NAKAMICHI
NEC
NIKKO
NSM
ONKYO
OPTIMUS
PANASONIC
PARASOUND
PHILIPS
PIONEER
CODE NUMBERS
046
037 057
103 008
063
057 080
185 041 044 050 086 107 130 134 135 138 139 203 204 167
111 182
261 262
267
182
159
035
002 123
042 069 102
050 185 134 008
111
010 069 102
080
093
018 033 047 208 272
042 175
130 143 144
030 273
014 061 092 141
158
004 022 136 163 213 214 242 243
185 007 023 055 071 072 142 137 254
061
241
005
102
011 028 070 076 249 252
059
044 107
027 041 044 051 077 107 209 246 274
212 247
014 073 092
010
044 107
179
153
182
147
258
244 265
006 005 067 178
271
217 218 219 095
014 062
046
044 107
030 038 039 168 169 273
010 050 057 058 081 082 083 085 093 195
103 201 172 008 068 248
233 240
041 044 107 246 253
010 020 025 056 174 175 176 257 263
52
CD - CD Players and Changers
BRAND
CODE NUMBERS
PRIMARE
PROCEED
PROTON
QUAD
QUASAR
RADIO SHACK
RCA
REALISTIC
ROTEL
SAE
SANSUI
SANYO
SCOTT
SHARP
SHERWOOD
SIGNATURE
SONY
SOUNDESIGN
SUGDEN
SUMO
SYLVANIA
SYMPHONIC
TAEKWANG
TANDY
TEAC
TECHNICS
TECHWOOD
THETA DIGITAL
TOSHIBA
VECTOR RESEARCH
VICTOR
WARDS
YAMAHA
YORX
266
239
044 107 228
269
103 008
182
017 042 150
042 050 051 102 181 182 187
044 107 161 178 250
044 107
044 069 107 128 171 190 125
050
069 102
026 031 051 066
003 019 051 096 112 115 119 166
033
048 081 097 126 133 177 225 226 164 259 260
251
264
155
044 107
052 181
195 085
010
015 034 036 051 052 101 131 140 079
060 103 200 172 184 008 068
076
234 235 270
006 067 091 160 148
080
004 022 114 124
185 033
024 046 054 186 183 245
182
DVR - Digital Video Recorders (TiVo, Replay)
DIRECTV
HUGHES
HUMAX
PHILIPS
PIONEER
RCA
REPLAY TV
SONY
TIVO
117
108 117
118
108 090 117
117
109
075
104 105
090 117 118
LIGHT - Lighting Systems
X-10
LITE TOUCH
LIGHTOLIER CONTROLS
LUTRON
RAKO
XANTECH
093 183 257
208 212
307
077 158 159 306
301 302 303 304 305
188 189
53
AUX - Custom Installation Products
BRAND
3M
ADS TECH
AHANIX
AIWA
APPLE
ARCHER
AURORA
AUTON
AURORA MULTIMEDIA
BEDIENUNGSANLEITUNG
BOSE
CALYPSO
CE LABS
CELADON
CRESTRON
DA LITE
DDI
DELL
DMX
DRAPER SCREEN
DREAMVISION
DVDO
DWIN
EVERQUEST
EXTRON
FAROUDJA
FUJI
GATEWAY
HAUPPAUGE
HP
HUNTER DOUGLAS
IOGEAR
JERROLD
JVC
KALEIDESCAPE
KENSINGTON
KENMORE
KENWOOD
KEY DIGITAL
KEYSPAN
LG
LINKSYS
MAKITA
MICROSOFT
MINDPATH
NILES
NSM
PIANO DISC
PINNACLE
POLK AUDIO
PRIMARE
RCA
RUSSOUND
SCIENTIFIC ATLANTA
SIMA
SOLO ELECTRONICS
SOMFY
CODE NUMBERS
152
404
260
164
412 401
155
300
191
220
221
409
491 492 493 494
298
211
213 214 215 216 217 218
269
403
261 262 263 264 265 266 267 268
156
204
097
299
080 253
206
151
184 254
209
261 262 263 264 265 266 267 268
294 295
261 262 263 264 265 266 267 268 252
219
407
153
185
259
406
251
185
273 274 275
297
296
270
186 201
408 107 261 262 263 264 265 266 267 268 252
205
160 187 272
161
085
405
162
402
258
081
156 163
082
207
078 079 411
54
AUX - Custom Installation Products
BRAND
SONY
STARCOM
TOSHIBA
TURBOSCAN
VELODYNE
WINBOOK
WURLITZER
XANTECH
CODE NUMBERS
164 165 166 271 261 262 263 264 265 266 267 268 414
153
261 262 263 264 265 266 267 268
167
203 413
261 262 263 264 265 266 267 268
410
168 169 170 171 172 276 277 278 279 280 281 282 283 284 285 286 287
288 289 290 291 292 293
AUX - Media PC Controls
DELL
GATEWAY
HAUPPAUGE
HP
KEYSPAN
MICROSOFT
SONY
TOSHIBA
WINBOOK
261 262 263 264 265 266 267 268
261 262 263 264 265 266 267 268
294 295
261 262 263 264 265 266 267 268 252
297
261 262 263 264 265 266 267 268 252
261 262 263 264 265 266 267 268
261 262 263 264 265 266 267 268
261 262 263 264 265 266 267 268
AUX - XBox Controls
MICROSOFT/XBOX
408 107
AUX - iPod Controls
APPLE/iPod
BOSE
KENSINGTON
412 401
409
406
WEBTV - Internet Browsers for TV
ECHOSTAR
MITSUBISHI
SONY
PHILIPS/MAGNAVOX
106
102
096
095
TAPE - Tape, Cassette and Reel to Reel recorders
AIWA
CARVER
DENON
FISHER
GOLDSTAR
HARMAN KARDON
JVC
KENWOOD
LINN
LUXMAN
MAGNAVOX
015 071 100 114
006 008 027 024 036 137
105 227 229
064
011
233
106 116 239 240
005 013 023 026 064 145 146 181 190
124
035 137 139
027
55
TAPE - Tape, Cassette and Reel to Reel recorders
BRAND
MARANTZ
MCINTOSH
MITSUBISHI
NAD
NAKAMICHI
ONKYO
OPTIMUS
PANASONIC
PHILIPS
PIONEER
QUASAR
SANSUI
SHARP
SHERWOOD
SONY
TEAC
TECHNICS
TOSHIBA
VICTOR
YAMAHA
CODE NUMBERS
014 027 056 065 087
238
242 243
029 048
244 245 025
002 012 016 017 018 019 115
026 054 055
007 010 032 088 195
027 087
003 039 047 050 066 098 222
007 088
027 113 119 224
026 057 131 175 181
038 004 028 030 033 034
020 022 052 084 089
009 059 212
007 010 076 088 109 122 193
112
106
021 026 031 067 040
56
Universal Remote Control, Inc.
Frequently Asked Questions
If the batteries run out, will I lose my settings?
No. The Omega stores all of your settings in non-volatile FLASH memory. You could remove the batteries for months, replace them at your
convenience and the Omega would still remember your settings.
Who can I call for more answers?
The Universal Remote Control technical support and customer service
staff are ready to answer any questions you might have.
Call us at 1-914-835-4484
Monday - Friday, 9AM to 6PM (EST)
Warranty
The Omega is covered against any manufacturers defects or workmanship for a period of one year from the date of purchase if purchased
from an authorized Universal Remote Control dealer. Units purchased
from online auction sites or other unauthorized resellers have no warranty. This warranty does not cover the following items:
Damage from misuse, neglect, or acts of nature.
Products that have been modified or incorporated into other products.
Products purchased more than 12 months ago.
Units purchased from unauthorized dealers or companies.
Specifications
Learning Capability - 1585 IR commands
Macro Capability - 913 Macros of up to 190 steps each
Range - Line of Sight via Infrared): 30-50 feet,
- Radio frequency): 50 to 100 feet
Note: Both line of sight and RF range vary, depending upon the environment
RF Frequency: 418MHz
Weight: 8 oz. (with batteries)
Size: 8.5” x 2 7/16” x 1”
Batteries: Four AAA Alkaline batteries included
LCD Size: approximately 7/8” x 1-7/8”
57
The Complete Control
Remote Control System
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
OCE-0031B
Rev03
TM
Information To The User
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one more of the
following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and
receiver.
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to this equipment. Such modifications could void the user's authority to operate the equipment.
Universal Remote Control®
Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
Source Exif Data: 
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Page Count                      : 62
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:16fb51a7-641c-4eaa-ae40-1ebc0cee07e9
Producer                        : Acrobat Distiller 6.0 (Windows)
Company                         : emc센터
Source Modified                 : D:20060928120759
Headline                        : 
Create Date                     : 2006:09:29 09:09:58+09:00
Creator Tool                    : Acrobat PDFMaker 6.0 for Word
Modify Date                     : 2006:09:29 09:09:58+09:00
Metadata Date                   : 2006:09:29 09:09:13+09:00
Document ID                     : uuid:51fc14a1-a8be-48eb-b9b9-54362c9c9cbf
Version ID                      : 19
Format                          : application/pdf
Title                           : EMISSION TEST REPORT
Creator                         : 理쒖꽑誘
Subject                         : 
Author                          : 理쒖꽑誘
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OZ5URCMX650

Navigation menu