Ohsung Electronics URCMX900I RF REMOTE CONTROLLER User Manual I

Download:
Mirror Download [FCC.gov]
Document ID	794569
Application ID	hPrYyAj1Hp4kc46Cwfpu/g==
Document Description	USERS MANUAL
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	213.21kB (2665122 bits)
Date Submitted	2007-05-21 00:00:00
Date Available	2007-05-23 00:00:00
Creation Date	2007-05-15 10:17:59
Producing Software	Acrobat Distiller 6.0 (Windows)
Document Lastmod	2007-05-15 10:18:15
Document Title	Microsoft Word - I_User manual.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	C0CCC7F6B9CC

Test Report No.: GETEC-E3-07-041
FCC Part 15 Subpart B,C
APPENDIX I
: USER’S MANUAL
EUT Type: Remote Controller
FCC ID.: OZ5URCMX900I
OCE-0050B(MX-900i)_130*180 2007.3.28 11:15 AM 페이지1
Operating Your System
With The MX-900i
OCE-0050B(MX-900i)_130*180 2007.3.28 11:15 AM 페이지2
This remote control was
Custom Programmed for you by:
TABLE OF CONTENTS
For questions about your Custom Programming call:
Introduction
The LIGHT Button
Optional RF “No Rules” Operation
Custom Programming of a complex home theater and/or a multi-room
system is one of the most challenging tasks within an audio/video installation. It involves an intimate knowledge of how the components interact
and exact details on the proper sequences of control.
Installing Batteries
Programming the MX-900i
Only a Complete Control dealer has the requisite experience and training
to quickly and effectively customize a remote control for true automated
operation.
Selecting a New “Activity”
Using the MX-900i to Control an “Activity”
Displaying the Setup Screen
Selecting from the Setup Screen
Setting the LCD
Sound Volume
10
Light Settings
10
System Settings
11
Version Information Displays
11
Warranty
12
Specifications
12
Information To The User
13
Warning
13
Congratulations on your choice!
MX-900i Owners Manual © 2006 Universal Remote Control, Inc.
Front Cover Photo courtesy of Robert Ridenour of Connected Technologies,
www.connected-technologies.com
The information in this manual is copyright protected. No part of this manual may
be copied or reproduced in any form without prior written consent from Universal
Remote Control, Inc.
UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE IN THIS MANUAL.
The information in this manual may be subject to change without prior notice.
Complete Control is a registered trademark of Universal Remote Control, Inc.
Entertainment Made Simple is a trademark of Universal Remote Control, Inc.
All other brand or product names are trademarks or registered trademarks of their
respective companies or organizations.
Universal Remote Control
Universal Remote Control, Inc.
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
®
OCE-0050B(MX-900i)_130*180 2007.3.28 11:15 AM 페이지1
MX-900i OWNERS MANUAL
MX-900i OWNERS MANUAL
Congratulations!
Optional RF “No Rules” Operation
You’ve purchased a unique synthesis of hardware and software engineering,
the Complete Control MX-900i. The MX-900i achieves a magnificent combination of power and flexibility, simplifying and automating operation of even the
most complex system.
In combination with a Complete Control RF Base Station, the MX-900i can
control your system without being in line-of-sight of the equipment.
One Touch Blue Backlighting
Simply press the LIGHT button to backlight the screen.
Either the MRF-350i or the RFX-250i RF base station is compatible with the
MX-900i. Both incorporate RF addressing. RF Addressing gives you the ability to
control equipment locations throughout your home, even if they are concealed
in other rooms or are behind closed doors.
Integrated Sound Signaling
The MX-900i incorporates a small speaker for beeps. Anytime you press a
button, the MX-900i signals that it has understood your command with a
beep sound.
1.The MX-900i sends radio waves
in every direction, so you don’t
have to point the remote anymore!
Custom Labeled Buttons
The MX-900i is equipped with a bright easy to read LCD screen which
labels the six buttons to the right of the screeen. These button labels
change based on what you are watching or listening to. Thus, if you have
selected Watching TV, you will see a list of buttons that are useful to that
activity, while if you select DVD, the buttons will control the DVD.
2.The RFX-250i RF Sensor can be freely
positioned for optimal reception.
LIGHT Button
3.The MRF-350i’s built-in Front Blaster sends commands to
components in the same cabinet space as the MRF-350i.
Press the Light button on the
side of the MX-900i to backlight
the LCD display and all of the
buttons.
4. Self-adhesive “Flashers” affix to the
Infrared sensors on the front panels of your
components.The Flashers relay commands
to components out of sight of the MRF350i’s Front Blaster.The flashers plug in to
the MRF-350i’s rear flasher line outputs via
their 10 foot cables. Uniquely, the MRF-350i
can also connect to rear panel IR Inputs via
its adjustable IR Line Outputs.
Page 1
Page 2
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지3
MX-900i OWNERS MANUAL
MX-900i OWNERS MANUAL
Installing Batteries
Programming the MX-900i
Open the battery cover by pressing
the release and pulling back the
cover on the back of the control.
Remove the cover.
The MX-900i is programmed via a Windows PC equipped with a USB port
(programming cable included), using our proprietary software, MX-900i
Editor. You can download this software from our website:
Observe the + and - polarity
indications inside the battery
compartment.
www.universalremote.com
Basic setup takes only a few minutes with this software. However, to fully
automate an audio/video system the user must have a detailed knowledge
of each component, you the user (and your preferences) and how the
system is connected and operated. We highly recommend that you use a
professional audio/video installer to program your MX-900i so you will be
able to enjoy all the benefits of the MX-900i as well as one touch operation
via macros.
Place the four AAA batteries into
their positions in the battery compartment observing the + and polarity indicators on the batteries.
Now, replace the battery cover by
inserting the hinged end in first,
then snapping the cover back into
place.
Page 3
Page 4
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지5
MX-900i OWNERS MANUAL
MX-900i OWNERS MANUAL
Selecting a New “Activity”
Using the MX-900i to Control an “Activity”
The MX-900i’s WATCH and LISTEN buttons display the activities you can
control with your MX-900i. When you want to watch something else (a
DVD movie, a videotape or an HDTV broadcast), simply press the
WATCH button and select the new activity. When you want to listen to
the radio or to a CD, touch the LISTEN button and select what you would
like to listen to.
Once you’ve selected a new activity, the MX-900i displays the title of the
activity at the top of the screen. Below the title, the LCD displays the customized names of any special features you need for the activity. All the
hard buttons of the MX-900i have now changed to functions optimized for
this activity.
Your installer will have programmed the button you pressed to totally configure your system to watch or listen to whatever you selected. Now, the
screen will change, and all of the LCD buttons will be reconfigured to
give you full control of your system while watching or listening to your
selection!
When you press the LISTEN button,
you can see the most frequently used
activities you have for listening in
your system.
When you press the WATCH button,
you can see the most frequently used
activities you have for watching the
sources in your system.
The Title displays
what activity you
can control.
The LCD button
labels describe
special features
for this activity.
Press either of the
PAGE buttons to see
any other available
choices.
The Channel and
Previous Channel
buttons will change
channels when you
have selected an
activity like Watch
CABLETV or
Watch SAT TV .
The Volume and
Mute buttons always
control the sound
regardless of what
screen is displayed.
PAGE DISPLAY
At the bottom of the LCD screen, the
page display informs you if there are
other pages of buttons available.
The 4 way cursor
buttons enable you
to navigate on
screen guides and
menus with ease.
The transport buttons
(Play, Stop, Skip-, Skip+,
FF, REW and Pause)
operate when the selected activity requires them
(for example, if you
watch CABLETV with a
TiVo type of DVR, these
buttons will control the
built-in DVR, while if
you are watching a
DVD, these buttons will
control the DVD player).
The Number keypad
will enter numbers for
the activity you’ve
selected. Thus, for
watching Cable TV,
you use the number
keypad to enter channel numbers, while
when listening to CD,
the number keypad
enters track numbers.
Press either of the PAGE buttons to see any other available choices.
Page 5
Page 6
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지7
MX-900i OWNERS MANUAL
MX-900i OWNERS MANUAL
Displaying the Setup Screen
Setting the LCD
You can adjust the settings of the MX-900i whenever you
like by pressing and holding both the WATCH and the
ENTER button at the same time for three seconds. When
you do, the screen will change to the SETUP screen. If
you do not press any button on the SETUP screen within
30 seconds, the MX-900i will time out and automatically
return to normal operation. You can return to normal
operation before that by pressing either the WATCH or
the LISTEN button.
With these settings, you can set the MX-900i to constantly display the LCD
when not in use, or show a blank screen when not in use. Additionally, you
can control the contrast of the screen.
To activate the LCD On/Off setting, press
this button. See below.
To activate the CONTRAST setting, press
this button. See the next page.
To activate the BRIGHTNESS setting, press
this button. See the next page.
At the same time, press and
hold both the WATCH button and the ENTER button.
When the SETUP screen
appears, you can release the
two buttons.
To exit without saving any changes you
have made, press EXIT.
LCD Timer Setting:
If you set the LCD to OFF, the timer settings will appear. The LCD will go blank
after waitting the interval you set here by
adjusting the LEFT and RIGHT arrow
keys.
The timer can be set to turn off the LCD
between 10 seconds and 20 minutes.
Selecting from the Setup Screen
Simply touch the button for the setting you’d like to adjust:
LCD - The appearance of the
screen.
LIGHT - What the LIGHT button
does.
SOUND - The volume of the
beeps.
The Timer Interval is displayed here.
To SAVE any changes you have made,
press SAVE.
To exit without saving any changes you
have made, press EXIT.
To change the timer interval, press the
LEFT or RIGHT arrow keys.
SYSTEM - The battery low warning.
VERSION - No adjustments are
possible. Displays factory info.
Page 7
Page 8
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지9
MX-900i OWNERS MANUAL
Setting LCD Contrast
MX-900i OWNERS MANUAL
Light Settings
You can adjust the contrast of the LCD screen using the LEFT and RIGHT
arrow keys once the LCD contrast screen has been selected (shown on the
previous page).
The current CONTRAST is
displayed here via a bar graph.
You can adjust the backlighting of the remote in two additional ways:
1. You can turn on/off the LCD and the hard button backlighting.
2. You can select the amount of time the lighting stays on after the last button
press from a range of values between 10 seconds and 90 seconds.
Change whether the backlighting is on or off by pressing this
button.
To SAVE any changes you have
made, press SAVE.
To exit without saving any
changes you have made, press
EXIT.
If you want the backlighting
always OFF, set it to OFF.
Adjust the CONTRAST setting with
the LEFT and RIGHT keys as shown
in the previous pages.
If you would like the backlighting on, select ON.
The current timer setting is
displayed here in seconds.
Setting LCD Brightness
You can adjust the brightness of the LCD screen using the LEFT and
RIGHT arrow keys once the LCD Brightness screen has been selected
(shown on the previous page).
The current Brightness is displayed here as a bar graph.
Adjust the backlighting timer setting
with the LEFT and RIGHT keys as
shown in the previous pages.
Sound Volume
Your MX-900i beeps whenever a button is pressed. However, you can adjust
the volume of the beep to one of four levels as shown here:
OFF
To SAVE any changes you have
made, press SAVE.
SLIGHT BEEP
To exit without saving any
changes you have made, press
EXIT.
Adjust the LCD brightness with the
LEFT and RIGHT keys as shown in
the previous pages.
MODERATE BEEP
LOUDEST BEEP
The current Beep volume is displayed here as a “bar”.
Adjust the volume of the beep by
TAPPING the LEFT and RIGHT arrow
keys as shown in the previous pages.
Page 9
Page 10
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지11
MX-900i OWNERS MANUAL
MX-900i OWNERS MANUAL
System Settings
Warranty
You can set your MX-900i to display the Low Battery warning at a power
level between 0% and 20% (in 5% increments).
The Power bar indicates available power with Black.
The MX-900i is covered against any manufacturing defects or faults in
workmanship for a period of one year from the date of purchase when
purchased from an authorized Complete Control dealer. Units
purchased from online auction sites or other unauthorized resellers have
no warranty. This warranty does not cover the following items:
Press here to adjust the battery
warning level.
◆
◆
◆
◆
The Memory bar indicates
available memory with Black.
The memory in use is White.
To exit, press WATCH.
Version Information Displays
Should you be curious, the Version indicates what firmware and software
versions were used to program your MX-900i.
Damage from misuse, neglect, or acts of nature.
Products that have been modified or incorporated into other products.
Products purchased more than 12 months ago.
Units purchased from unauthorized dealers or companies.
Specifications
Memory - 4 Megabits of Flash Memory (for User Configuration)
Devices - Flexible, typically can support up to 40 Devices
Pages - Flexible, typically can support up to 40 Pages on each Device
Learning Capability - Standard frequencies (15kHz to 100kHz)
Macro Capability - Up to 255 steps each, however nesting is allowed
IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 433.92MHz
Weight: 14 ounces (with batteries)
Size: 8” H x 2.25” W x 1.25” D
Batteries: 4 AAA Batteries
To exit, press WATCH.
Page 11
Page 12
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지13
MX-900i OWNERS MANUAL
NOTE
Information To The User
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged
to try to correct the interference by one more of the following measures:
◆ Reorient or relocate the receiving antenna.
◆ Increase the separation between the equipment and receiver.
◆ Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
◆ Consult the dealer or an experienced radio/TV technician for help.
Warning
Changes or modifications not expressly approved by the manufacturer
could void the user's authority to operate the equipment.
Note : The manufacturer is not responsible for any Radio or TV
interference caused by unauthorized modifications to this equipment.
Such modifications could void the user's authority to operate
the equipment.
Page 13
Page 14
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지15
NOTE
NOTE
Page 15
Page 16
OCE-0050B(MX-900i)_130*180 2007.3.28 11:16 AM 페이지17
500 Mamaroneck Avenue, Harrison, NY 10528
Phone: (914) 835-4484 Fax: (914) 835-4532
www.universalremote.com
OCE-0050B(Rev.01)

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:dd56ea89-f12f-403b-b33c-0bd539b2a254
Producer                        : Acrobat Distiller 6.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2007:05:15 10:18:15+09:00
Create Date                     : 2007:05:15 10:17:59+09:00
Metadata Date                   : 2007:05:15 10:18:15+09:00
Document ID                     : uuid:06618a1a-baf1-448c-bfd2-71f0e5494e24
Format                          : application/pdf
Title                           : Microsoft Word - I_User manual.doc
Creator                         : 
Author                          : 

EXIF Metadata provided by EXIF.tools