Ohsung Electronics URCSNP2 Streaming Network Player User Manual EMISSION TEST REPORT

Ohsung Electronics Co., Ltd. Streaming Network Player EMISSION TEST REPORT

User Manual

G Order Number : GETEC-C1-13-352 FCC Part 15 subpart B Test Report Number : GETEC-E3-13-089 Page 1 / 1 EUT Type: Streaming Network Player FCC ID.: OZ5URCSNP2 APPENDIX G : USER’S MANUAL
Owner's ManualSNP-2 Streaming Network Music Player
SNP-2 Owner’s Manual ©2013 Universal Remote Control, Inc.The information in this Owner’s Manual is copyright protected. No part of thismanual may be copied or reproduced in any form without prior written consentfrom Universal Remote Control, Inc.UNIVERSAL REMOTE CONTROL, INC. SHALL NOT BE LIABLE FOR OPERATIONAL, TECHNICAL OR EDITORIAL ERRORS/OMISSIONS MADE INTHIS MANUAL.The information in this Owner’s Manual may be subject to change without priornotice.Total Control is a registered trademark of Universal Remote Control, Inc.URC - Control the Experience is a registered trademark of Universal RemoteControl, Inc.SiruisXM, Rhapsody, vTuner and Pandora are all registered trademarks.All other brand or product names are trademarks or registered trademarksof their respective companies or organizations.Universal Remote Control,Inc.500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532
Congratulations! 1Features and Benefits 1Parts Guide 2Front Panel Description 3Rear Panel Description 4Installation 5Navigation 8Music Services 11Settings 15Specifications 28Limited Warranty Statement 29End User Agreement 31Federal Communication CommissionInterference Statement 32Declaration of Conformity 33TABLE OFCONTENTS
Page 1SNP-2 STREAMING NETWORK PLAYERCongratulations!Thank you for purchasing the SNP-2 Streaming Network MusicPlayer! Listen to popular music services like Rhapsody, Pandora,vTuner, and SiriusXM. Also listen to your stored music viaWindows Media Player or My Music, which will play music fromlocal shared folders and iTunes playlists. Integrate the SNP-2 with aTotal Control system to listen throughout your home or office, useas a standalone device using Complete Control or other third partycontrol products.View, and control what is playing from any Total Control remote,keypad or iOS device. Also use the SNP-2’s HDMI output to viewand control its interactive and engaging on-screen interface. Features and Benefits• HDMI Output Utilize the SNP-2’s HDMI output to enjoy and quicklynavigate through its interactive and colorful onscreentelevision experience. • Streams Popular Music ServicesSubscribe and listen to popular music services such asSiriusXM, Rhapsody, Pandora and vTuner.• Plays Compatible Network MusicAccess stored music via My Music or Windows MediaPlayer, on your PC, Mac or network attached storage harddrives. Compatible audio formats include: MP3 (16 kbps to320 kbps), WMA, ACC, OGG, FLAC (16 & 24 bit and up to192kHz sample rate), ALAC (Apple Lossless), M4A, and WAV.• Full Two-way CommunicationView song information on your television as well as yourTotal Control remote, keypad or mobile device.• Third-Party IntegrationEasily integrate other brands with the SNP-2 by using theanalog or digital outputs.• Easy rack-mounting Streamline and organize your SNP-2 along with the rest ofthe Total Control system by integrating the optional RMK-1rack-mounting kit.
Page 2SNP-2 STREAMING NETWORK PLAYERParts GuideThe SNP-2 Streaming Network Player includes:1 - SNP-2 Streaming Network Player 1 - AC Power Adapter1 - Ethernet Cable 1 - Owner’s Manual
Page 3SNP-2 STREAMING NETWORK PLAYERFront Panel DescriptionPower LED: Indicates the SNP-2 is connected to power. Ethernet LED: Indicates the network connectivity status.●ON = Connected●OFF = Not Connected●Blinking = Attempting to connectReset Button: The front panel reset button offers a quick way to power cycle or reset the SNP-2 back to its factory state.● Power Cycle: Press to turn the unit OFF then back ONagain while retaining your music account information.(Ie. login and music libraries.)● Factory State: Pressing and holding for 15 seconds willrevert the SNP-2 back to its factory state while alsoremoving your music account information. (Ie. login andmusic libraries.)PowerEthernetReset
Rear Panel DescriptionPower 12V (1A): The power socket accepts either UL/CSA approved110V power cords or CE approved 220V power cables to be usedwith the power supply. The power supply’s operating range is from100V to 240V.LAN: A 10/100 LAN connection ensures that the SNP-2 sends anetwork stream to the DMS amplifiers. Also receives streams frompopular music services and networked hard drives.Control IR IN: Connect a URC RF base station to control the SNP-2with a one-way URC remote control.HDMI Output: HDMI, 1.4A compatible, contains both digitalaudio and digital video signals.Coaxial Digital Audio Output: Connect to a coaxial digital input ofa device to enjoy digital quality music.Analog Audio (L, R): Connect to the analog inputs of a device.Page 4SNP-2 STREAMING NETWORK PLAYERLANPower Control IR INHDMI OutputCoaxialAnalog Audio
Page 5SNP-2 STREAMING NETWORK PLAYERInstallationTotal Control Interface View Only (Streaming Audio Device)The SNP-2 can be used as a streaming audio device in up to 32zones by broadcasting its proprietary audio signal over the localarea network to the Total Control system. The signal is then receivedby a DMS-100, DMS-1200 or a DMS-AV, all while the user controlsthe music selection from one of the Total Control interfaces like theTRC-1080.1. Plug the power cord into the rear of the SNP-2 and the otherend into a power outlet.2. Plug the Ethernet RJ45 cable to the LAN port in the rear ofthe SNP-2 and plug the other end into an available port of arouter or URC MFS switch. 3. Control the SNP-2 directly from a Total Control interface suchas a TRC-1080. (Requires the Custom Professional todownload the program to the Total Control system.)TRC‐1080
SNP-2 STREAMING NETWORK PLAYERHybrid Total Control SystemWhile the SNP-2 is streaming over the network, its interface can beviewed and controlled via an HDMI display such as a television oran audio/video receiver.1. Plug the power cord into the rear of the SNP-2 and the otherend into a power outlet.2. Plug the Ethernet RJ45 cable to the LAN port in the rear ofthe SNP-2 and plug the other end into an available port of arouter or URC MFS switch. 3. Connect an HDMI cable to the rear of the SNP-2 and anHDMI TV. 4. Control the SNP-2 from a Total Control interface or from thetelevision. (Requires the Custom Professional to downloadthe program to the Total Control system.)TRC‐1080Page 6
SNP-2 STREAMING NETWORK PLAYERStandalone OperationThe SNP-2 also functions without a Total Control system, by simplyadding a URC Complete Control RF base station and RF remotecontrol. 1. Plug the power cord into the rear of the SNP-2 and the otherend into a power outlet.2. Plug the Ethernet RJ45 cable to the LAN port in the rear ofthe SNP-2 and plug the other end into an available port of arouter or URC MFS switch. 3. Connect an HDMI cable to the rear of the SNP-2 and anHDMI TV. 4. Connect a URC RF base station to the IR input of the SNP-2. 5. Program a compatible one-way URC remote to communicatewith the RF base station. (Requires the URC Certified CustomProfessional to program the URC remote and base station.)MX‐780Page 7
Page 8SNP-2 STREAMING NETWORK PLAYERNavigation Music MenuThe SNP-2’s on-screen interface displays a title bar, music servicesand recent stations or tracks. Navigate all screens using any of theTotal Control interfaces, such as a TRC-1080 or a compatible mobiledevice using the Total Control Mobile app.Title BarThe Title Bar is available on all SNP-2 screens and displays the Dateand Time, Title Name and Now Playing metadata. ●The Date and Time are automatically updated via theinternet.●The Title Name may differ based on how it was programmedby your URC Certified Custom Professional.●The Now Playing section of the Title bar displays informationfor the current audio selection. Music Services RibbonSelect one of the music services using the remote’s Left/Rightnavigation arrows to scroll. Then press the Select button to choose aservice. Quick Selection ListWhen selected, each music service lists its recently played stationsand tracks. This provides instant access to your common stations.After selecting a service, press the Down arrow to choose from therecent list, then Select to choose a recently played item.Title BarMusic Services RibbonQuick Selection ListDate and Time Now PlayingTitle name
Music ServiceThe Music Service options will vary per service and provide specificcategories for you to browse. However, navigation with thedirectional arrows remains the same.Music Service OptionsUse the Left/Right and Up/Down navigation buttons to move to thenext icon. Pressing the CH+/CH- buttons will quickly scrollthrough a list a page at a time. Pressing and holding the navigationbuttons will continously cycle to the next item.Alpha IndexSome screens display an alphabetical index so you can quicklysearch your music library. When available, the Alpha Index searchdisplays for 2 seconds. Simply press the Right navigation arrow tomove to the index, then press the Up or Down arrows to select aletter. Press the Select button to choose.Menu/Music Menu ButtonSelecting the Menu/Music Menu button will return you to theprevious menu or the Main SNP-2 screen.Page 9SNP-2 STREAMING NETWORK PLAYERMenu/ Music Menu ButtonMusic Service Options Alpha Index
Page 10SNP-2 STREAMING NETWORK PLAYERNow PlayingThe Now Playing screen displays the song information, options barand the transport functions. These buttons will vary based on eachmusic service however navigation with the directional arrowsremains the same.Song InformationThis area displays the current song, album, artist, song duration, andalbum art, when available from the music provider. Transport ButtonsThe buttons within the Transport area will vary for each musicservice. Normally, the play, pause, or stop button (varies per music service)is always the first highlighted button for quick control. Use the Left/Right navigation buttons to move to the next icon.Pressing and holding the Left/Right buttons will continously cycleto the next item, one item at a time. Pressing the Ch+/Ch- buttonswill quickly scroll through a list a page at a time.Options BarThe Options bar will also vary per music service. To select an iconwithin the Options bar, first navigate to the Menu button then pressUp. Press the Select button to choose an option. Pressing the Menubutton will return you to the previous menu. Options BarSong InformationTransport Buttons
Page 11SNP-2 STREAMING NETWORK PLAYERMusic ServicesThe SNP-2 offers access to popular streaming music services, locallystored music and user favorites. You can sign in or register to usestreaming services such as vTuner, SiriusXM, Rhapsody, andPandora. You can also access and play your stored audio using MyMusic and Windows Media Player. Save your favorite radio stationsor songs to quickly access them from the Favorites icon on the mainmenu. My MusicAccess up to 100,000 songs including iTunes shared folders and allcompatible music found on network attached storage devices (PC orMac). For further details, refer to the My Music user guide at www.universalremote.com.
Page 12SNP-2 STREAMING NETWORK PLAYERSiriusXMLogin and access up to 165+ channels of satellite radio (dependenton subscription level) and browse through various channels,categories and featured shows like Howard Stern and Oprah. For further details, refer to the SiriusXM user guide at www.universalremote.com.RhapsodyLogin and access Rhapsody’s internet radio music collection ofmore than 16 million tracks. Select from individual tracks, analbum, playlist or radio stations.
Page 13SNP-2 STREAMING NETWORK PLAYERPandoraCreate up to 100 unique radio stations while Pandora tailors yourmusic selections based on your likes and dislikes. For further details, refer to the Pandora user guide at www.universalremote.com.vTunerInstantly access local, national, or global radio stations of varyinggenres without needing a username or password. For further details, refer to the vTuner user guide at www.universalremote.com.
Page 14SNP-2 STREAMING NETWORK PLAYERWindows Media PlayerAccess and listen to your playlist’s created using Windows MediaPlayer. For further details, refer to the Windows Media Player user guide atwww.universalremote.com.FavoritesQuickly access up to 120 favorite radio stations, tracks or playlistsfrom any service directly from the main menu. For further details, refer to the Favorites user guide at www.universalremote.com.
Page 15SNP-2 STREAMING NETWORK PLAYERSettingsThe Settings screen provides access to the many options shownbelow. Use the navigational Up/Down arrows to scroll through thelist and press the Select button to make a selection.
Page 16SNP-2 STREAMING NETWORK PLAYERAccount SetupAccess and enter login credentials for each subscribed musicservice.Select Go Back to return to the previous screen.Pandora Account SetupEnter the customer’s username and password, then validate theinformation to access the service.
Page 17SNP-2 STREAMING NETWORK PLAYERRhapsody Account SetupEnter the customer’s username and password, then activate theaccount to access the service. SiriusXM Account SetupEnter the customer’s username and password, then validate theaccount to access the service.
Page 18SNP-2 STREAMING NETWORK PLAYERMy Music ManagerThe My Music Manager menu allows for locating and managing thestored media on the local area network.Select Go Back to return to the previous screen.Shared Folder ManagerDisplays available shared drives on your network. A username andpassword may be necessary to access a shared drive.
Page 19SNP-2 STREAMING NETWORK PLAYERScan for Media NowThis option searches the shared folders for newly added media toinclude in the SNP-2 playlist. Automatic Media Scan ScheduleSetup a time for the SNP-2 to automatically locate newly addedmedia.
Page 20SNP-2 STREAMING NETWORK PLAYERArtist DisplaySorts the shared media by album artist or artist. Compilation SortSort compilations by album artist or like iTunes (Artist, AlbumName, then Tracks).
Page 21SNP-2 STREAMING NETWORK PLAYERHide/Show ServicesHide or show the listed services on the main screen by checking itsassociated box. Use the remote’s navigational Down arrow to access more musicservices. Select Go Back to return to the previous screen.
Page 22SNP-2 STREAMING NETWORK PLAYERAudio SetupThe SNP-2’s setup will determine whether or not the audio settingscan be modified. The audio settings will NOT be available, if yourcustom professional has configured the SNP-2 to stream its music tothe Total Control system and a DMS unit. However, the audiosettings will be available, if the SNP-2 is setup as a standalonemusic source. (See page 7 for Standalone operation.)The SNP-2 default audio output is set to a bit rate of 16 bit/44.1K.When ONLY S/PDIF or Analog Audio is set to ON, the audio outputis played at a bit rate of 24 bit/192K.● Streaming Output Set the Streaming Output to ON in order to stream music toDMS units connected to the Total Control system. WhenStreaming Output is turned OFF, playback is limited to hdmi,analog and coaxial outputs ONLY. ● Audio FadeWhen Audio Fade is set to ON the music will fade out, thenin, when changing between music sources. ● HDMI Audio OutputTurn ON the HDMI Audio Output to send digital audio to anHDMI device like a television or an audio receiver.● S/PDIF or Analog Audio OutputThe S/PDIF (Coaxial digital) or Analog Audio Output optionshould be set based upon the audio connection used for theSNP-2. Select Go Back to return to the previous screen.
Page 23SNP-2 STREAMING NETWORK PLAYERVideo SetupChoose the Video Output Resolution, based on your display deviceand region, either 720p 60Hz or 720p 50Hz.Select Go Back to return to the previous screen.
Page 24SNP-2 STREAMING NETWORK PLAYERDate and TimeManually set the SNP-2’s date and time by month, day, year, hourminute and AM/PM.Select Go Back to return to the previous screen.
Page 25SNP-2 STREAMING NETWORK PLAYERNetwork Properties and SetupSetup the SNP-2 with either a DHCP or Static IP address and viewit’s network information.● Set SNP-2 to DHCP (Default)Setting to DHCP will automatically communicate to thesystem’s router to be assigned an IP address.● Set SNP-2 to Static IPWhen Static IP is selected, an IP address must be manuallyentered, as well as the information for the subnet mask,default gateway and DNS server. ● View Network InformationProvides a listing of the SNP-2’s current IP address, subnetmask, default gateway and DNS server.Select Done to save your settings.Select Go Back to return to the previous screen.
Page 26SNP-2 STREAMING NETWORK PLAYERScreen SaverThis option lets you specify the amount of time before a screensaver will begin when the unit is not in use and how long thescreen saver will cycle to the next image. ● Screen Saver TimeSelect from the options Never up to 20 minutes for the screensaver to begin. ● Screen Saver CyclingAlso select from 7, 15, 30, or 60 seconds to cycle betweenimages. Select Done to save your settings.Select Go Back to return to the previous screen.
Page 27SNP-2 STREAMING NETWORK PLAYERAbout SNP-2View the unit’s firmware and hardware versions. Ensure the unithas the latest versions by checking for available firmware updates. Select Go Back to return to the previous screen..
Page 28SPECIFICATIONSSpecifications Processor: Cortex - A5 ProcessorMemory: 1 GigabyteMood Lamp (White): 4 Station Dimming (Off . Min . Mid . Max)Power LED (Blue): Power StatusEthernet LED (Blue): Network StatusReset Button: System ResetPower: 12V/1A (Do Not USE 48V for MFSPOE-8)Ethernet: One 10/100 RJ45 port (Indicator 2 LED)HDMI: 1.4A Control: One IR Emitter Input (For RF one-way System)Coaxial: One SPDIF(Coaxial) OutAudio: One Audio Line Out
Page 29WARRANTYLimited Warranty Statement1. Limited Warranty and Disclaimers Universal Remote Control, Inc. (“URC”) warrants that the URC equipmentshall be free from defects in material and workmanship under normal usage forone (1) year from purchase when such is purchased from URC. This limitedwarranty is valid only in the United States of America. URC warrants that thesoftware will substantially conform in any material respect to its functionalspecifications at the time of delivery. URC SHALL NOT BE LIABLE FOROPERATIONAL, TECHNICAL OR EDITORIAL ERRORS AND/OROMISSIONS MADE IN THE URC DOCUMENTATION. URC DOES NOTWARRANT THAT THE URC SOFTWARE IS BUG-FREE OR ERROR FREE ORTHAT THERE ARE NO ERRORS/BUGS IN THE URC SOFTWARE. URC warrants that at the time of purchase the URC equipment and the URCsoftware complied with all applicable regulations and policies of the FederalCommunications Commissions (“FCC”) regarding electromagnetic interferencecaused by electronic/computing devices and to the extent that the URCequipment and/or the URC software fails to so comply, URC shall, at its ownexpense, take all reasonable measures to promptly cause such to comply.URC equipment purchases from other than an authorized URC dealer ordistributor are without warranty. THIS LIMITED WARRANT DOES NOT COVER TECHNICAL ASSISTANCEFOR HARDWARE OR SOFTWARE USAGE EXCEPT AS EXPRESSLYPROVIDED FOR HEREIN, THE EQUIPMENT, SOFTWARE ANDDOCUMENTATION OF URC ARE SUPPLIED “AS IS” WITHOUT ANYWARRANTY, EXPRESS, STATUTORY OR IMPLIED, OF ANY KIND. TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, URCEXPRESSLY DISCLAIMS ALL WARRANTIES, EXPRESS, STATUTORY ORIMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OFMERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. URCDOES NOT WARRANT, GUARANTEE, OR MAKE ANYREPRESENTATIONS REGARDING THE USE OF, OR THE RESULTS OF THEUSE OF, THE EQUIPMENT, SOFTWARE OR DOCUMENTATION INTERMS OF CORRECTNESS, ACCURACY, RELIABILITY OR OTHERWISE. EXCEPT AS EXPRESSLY PROVIDED FOR HEREIN, TECHNICAL SERVICESARE SUPPLIED “AS IS”, WITHOUT ANY WARRANTY, EXPRESS,STATUTORY OR IMPLIED, OF ANY KIND. TO THE MAXIMUM EXTENTPERMITTED BY APPLICABLE LAW, URC EXPRESSLY DISCLAIMS ALLWARRANTIES, EXPRESS, STATUTORY OR IMPLIED, INCLUDING BUTNOT LIMITED TO THE WARRANTIES OF QUALITY OR REASONABLESKILL AND CARE, OR OUTCOME OR RESULTS.
Page 30WARRANTYWITHOUT IN ANY WAY LIMITING THE GENERALITY OF THE OTHERPROVISIONS HEREIN, WARRANTY DOES NOT COVER: (I) DAMAGEFROM MISUSE, NEGLECT OR ACTS OR NATURE, (II) MODIFICATIONS,(III) INTEGRATION WITH THIRD PARTY CONTENT (IV) BEYOND THEWARRANTY PERIOD AND/ OR FAILURE TO FOLLOW URC WARRANTYCLAIM PROCEDURE. The warranty limitations and warranty disclaimers may not apply to end userin whole or in part, where such are restricted or excluded by applicable lawand such shall apply to the maximum extent permitted by applicable law.In the event of any warranty claim, URC will, at its sole option, repair the URCequipment using new or comparable rebuilt parts, or exchange the URCequipment for new or rebuilt equipment. In the event of a defect, these arethe end user’s exclusive remedies.All the URC equipment returned for service, exchange or repair require anRGA number. To obtain an RGA number, you must complete a ReturnRequest Form which you may obtain by calling (914) 835-4484 or contactingURC at returnrequest@universalremote.com. To obtain warranty service, enduser must deliver the URC equipment, freight prepaid, in its original packagingor packaging affording adequate protection to URC at 420 Columbus Avenue,Valhalla, NY 10595. It is end user’s responsibility to backup any macroprogramming, artwork, software or other materials that may have beenprogrammed into the unit. It is likely that such data, software, or other materialswill be lost during service and URC will not be responsible for any suchdamage or loss. A dated purchase receipt, bill of sale, installation contract orother verifiable proof of purchase is required. For the URC equipment supportand other important information, please visit URC's website available atwww.universalremote.com or call the Customer Service Center at (914) 835-4484.This limited warranty only covers the URC equipment issues caused by defectsin material or workmanship during ordinary consumer use. It does not coverproduct issues caused by any other reason, including but not limited toproduct issues due to commercial use, acts of God, third-party installation,misuse, limitations of technology, or modification of or to any part of the URCequipment. This limited warranty does not cover the URC equipment sold asused, as is, refurbished, so called "B stock" or consumables (such as batteries).This limited warranty is invalid if the factory applied serial number has beenaltered or removed from the URC equipment. This limited warrantyspecifically excludes the URC equipment sold by unauthorized resellers. With the exception of URC’s IR-only, broad-based consumer remotes, none ofURC’s PC programmable remotes or any of our Total Control® whole-house
Page 31WARRANTYequipment are authorized for online internet sales. Buying URC’s PCprogrammable remotes or any of our Total Control® whole-house equipmentonline means buying equipment that does not have a URC’s limited warranty.Such equipment is not eligible for URC tech support or software support,either.2. URC’S Limitations of Liability IN NO EVENT SHALL URC BE LIABLE FOR INDIRECT, SPECIAL,INCIDENTAL, EXEMPLARY, PUNITIVE OR CONSEQUENTIAL DAMAGESOF ANY KIND OR LOSS OF PROFITS OR BUSINESS OPPORTUNITY,EVEN IF URC IS ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.IN NO EVENT SHALL URC BE LIABLE FOR LOSS OF OR DAMAGE TODATA, COMPUTER SYSTEMS OR COMPUTER PROGRAMS.URC’S LIABILITY, IF ANY, FOR DIRECT DAMAGES OF ANY FORM SHALLBE LIMITED TO ACTUAL DAMAGES, NOT IN EXCESS OF AMOUNTSPAID BY END USER FOR THE URC EQUIPMENT.IN NO EVENT SHALL URC BE LIABLE FOR ANY EVENTS BEYOND ITSCONTROL, INCLUDING ANY INSTANCE OF FORCE MAJEURE.IN NO EVENT SHALL URC BE LIABLE FOR THE ACTS OR OMISSIONS OFEND USER OR ANY THIRD PARTY. THE LIMITATIONS OF LIABILITY MAY NOT APPLY TO END USER INWHOLE OR IN PART, WHERE SUCH ARE RESTRICTED LIMITED OREXCLUDED BY APPLICABLE LAW AND SUCH SHALL APPLY TO THEMAXIMUM EXTENT PERMITTED BY APPLICABLE LAW.URC SHALL NOT BE HELD RESPONSIBLE FOR THE STATEMENTS MADEBY OTHERS. SOME STATES OR JURISDICTIONS DO NOT ALLOW THE EXCLUSIONOR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, ORALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TOEND USER. THIS LIMITED WARRANTY GIVES END USER SPECIFIC LEGALRIGHTS AND END USER MAY HAVE OTHER RIGHTS WHICH VARYFROM STATE TO STATE OR JURISDICTION TO JURISDICTION.End User AgreementThe terms and conditions of the End User Agreement available atwww.universalremote.com/eua.php shall apply.
Page 32Federal Communication CommissionInterference StatementThis equipment has been tested and found to comply with the limits for a ClassB digital device, pursuant to part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in a res-idential installation. This equipment generates, uses and can radiate radio fre-quency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particularinstallation. If this equipment does cause harmful interference to radio or tele-vision reception, which can be determined by turning the equipment off andon, the user is encouraged to try to correct the interference by one more of thefollowing measures:Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.Connect the equipment into an outlet on a circuit different fromthat to which the receiver is connected.Consult the dealer or an experienced radio/TV technician forhelp.Warning!Changes or modifications not expressly approved by the manufacturer couldvoid the user's authority to operate the equipment.Note : The manufacturer is not responsible for any Radio or TV interferencecaused by unauthorized modifications to this equipment. Such modificationscould void the user's authority to operate the equipment.FCC CautionThis device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this device must accept any interference received, including interferencethat may cause undesired operation.Any changes or modifications not expressly approved by the party responsiblefor compliance could void the authority to operate equipment.
Page 33Declaration of ConformityCompany Name : OH SUNG ELECTRONICS CO., LTD.Company Address : #181 GONG DAN-DONG, GUMI, GYEONG BUK,Contact Information : REPUBLIC OF KOREAPhone: +82-54-468-7281, Fax: +82-54-461-8368Brand Name : UNIVERSAL remote controlProduct Name : STREAMING NETWORK PLAYERModel Name : SNP-2This product herewith complies with the requirements of EMC Directive (2004/108/EC) issued by theCommission of the European CommunityCompliance with these directives implies conformity to the following European Community EMC Directive EN 55022 EN 55024 EN 61000-3-2 EN 61000-3-3List of test reports and/or certificate verified compliance with the standards aboveDate of issue :Name and signature of authorized person : EMC Directive Report No. Testing Laboratory : Gumi College EMC CenterQuality Assurance TeamOHSUNG ELECTRONICS CO., LTD.
Page 34NOTE
Page 35NOTE
OCE-0099D Rev 01500 Mamaroneck Avenue, Harrison, NY 10528 Phone: (914) 835-4484 Fax: (914) 835-4532 www.universalremote.com

Navigation menu