Oki Electric Technology AASK2NWBB Bluetooth keyboard User Manual

Oki Electric Technology(Kunshan) Co.,Ltd Bluetooth keyboard

User manual

Samsung Bluetooth Keyboard Samsung Bluetooth Keyboard
Quick GuideQuick Guide
Keyboard HardwareKeyboard Hardware 1 2
5
3
4
1) Bluetooth LED
In Power On/Off, LED lights on , In Paring Mode LED blinks
2) Caps Lock LED
Caps Lock key is pressed this LED toggled
Caps
Lock
key
is
pressed
,
this
LED
toggled
.
3) FN key
Some keys have blue prined key together. That Blue key is operated, FN key
is
p
ressed at the same time
p
4) Power button
Power button have 2 kins of function.
1. Power On/Off – Press Power button for 2 seconds
2
Pi
PP Bttf4 d
2
.
P
ar
i
ng –
P
ress
P
ower
B
u
tt
on
f
or
4
secon
d
s
5) Battery Cover
Open – slide into left side
Close - slide inti right side
Slide
Slide
Batter
y
-
Cover
Paring flowParing flow
1) Battery inserting
Remove Battery Cover and then insert Two AAA batteries into the battery compartment.
Make sure to properly orient the positive(+) and negativ(-) ends as a specified by the
Marks in the battery compartment
2) Power ON
Press Power button for 2 seconds, and then see LED lights On.
3) Enter Pairin
g
Mode
g
Press Power button for 4 seconds, and then see LED blinks. Paring Mode duration
Time is 2 mins, if Paring failed within 2 mins, try again to press Power button for 4 secs.
4) Connecting to DECK TOP PC
> hardware & sound
2) Add Bluetooth Device
-
>
hardware
&
sound
2)
Add
Bluetooth
Device
3) Search Bluetooth Device 4) Select Samsung Keyboard and then Next
5) DECK TOP PC에 연결하기
5) Input digits and then Type
“
Enter
”
6) Check samusng keyboad device adding
5)
Input
digits
and
then
Type
Enter
6)
Check
samusng
keyboad
device
adding
7) Check in Device list.
Fre
q
uenc
y
2402MHz ~ 2480 MHz
◈Feature
qy
Temperature -20℃ ~ +50℃
Voltage DC 3V ( AAA * 2EA)
PC interface Bluetooth V2.0
Working distancd 15m Max.
Size 294 x 133 x 15.4 mm
•FCC (Federal Communications Commission)
•
•This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rul
es. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
•This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the i
nstructions, may cause harmful interference to radio communications.
•However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmf
ul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourag
dt t t tth i t f b fth f ll i
e
d
t
o
t
ry
t
o correc
t
th
e
i
n
t
er
f
erence
b
y one or more o
f
th
e
f
o
ll
ow
i
ng measures:
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technical for help.
–Reorient or relocate the receiving antenna.
–Increase the separation between the equipment and receiver.
–Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
–Consult the dealer or an experienced radio/TV technical for help.
–
•
WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may
cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the auth
ority to operate this equipment if an unauthorized change or modification is made.
•This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions:
•
1. This device may not cause harmful interference, and
1.
This
device
may
not
cause
harmful
interference,
and
•2. This device must accept ant interference received, including interference that may cause undesirable operation.
•
•
•CE
Hb
Oki El t i T h l (
Kh
)C
Ltd
dl tht
th d l
i li ith th
ti l
it
•
H
ere
b
y,
Oki
El
ec
t
r
i
c
T
ec
h
no
l
ogy
(
K
uns
h
an
)
C
o.,
Ltd
d
ec
l
ares
th
a
t
th
ese mo
d
e
l
sare
i
n comp
li
ance w
ith
th
e essen
ti
a
l
requ
i
remen
t
and other relevant provisions of directive 1999/5/EC.

Navigation menu