Olympus A01 WLAN+BT_Combo module User Manual DS F1 host

Olympus Corporation WLAN+BT_Combo module DS F1 host

UserManual.wiki >

Olympus >

A01 User Manual >

User manual_DS-F1 host HTML Version

1. User manual_module
2. User manual_DS-F1 host

User manual_DS-F1 host

Thank you for purchasing an Olympus VoiSquare.

Please read these instructions for information about using the product correctly and safely.

Keep the instructions handy for future reference.

165

109

137

193

221

249

VoiSquare

USER MANUAL

DS-F1

ENGLISH

ČEŠTINA

DANSK

DEUTSCH

ESPAÑOL

FRANÇAIS

NEDERLANDS

POLSKI

РУССКИЙ

SVENSKA

DRAFT

Introduction

• The information in this document is subject to change in future without prior notice. Contact Olympus

Customer Support Center for the latest product names, model numbers and other information.

• The display and illustrations of the device used in this manual may be different from the actual product.

While every precaution has been taken to ensure the accuracy of the information in this manual, errors

may occasionally arise. Any questions or concerns regarding doubtful information, or possible errors or

omissions should be directed to the Olympus Customer Support Center.

• Olympus Corporation and Olympus Imaging Corp. are the copyright holders of this manual. Copyright law

prohibits unauthorized reproduction of this manual, or unauthorized distribution of reproductions thereof.

• Note that Olympus will assume no liability in the event of damages, lost earnings, or any claims from third

parties resulting from improper use of the product.

Table of contents

Introduction

Introduction .......................................................................................... 2

Getting started

Identification of parts ............................................................................ 3

Touch screen ......................................................................................................4

Touch screen operations ......................................................................... 5

Installing the battery ............................................................................. 6

Charging the battery .............................................................................. 7

Charging using docking station and AC adapter ................................................7

Charging using docking station and USB cable .................................................7

Using the lithium-ion battery ............................................................................8

Turn the power ON ................................................................................. 9

Memory card........................................................................................ 11

Inserting a micro SD card .................................................................................11

Ejecting a micro SD card...................................................................................11

Various Settings ................................................................................... 12

Settings list ......................................................................................................12

Other information

Device care .......................................................................................... 13

Troubleshooting .................................................................................. 14

Wi-Fi Function ...................................................................................... 16

Safety precautions ............................................................................... 18

Specifications ...................................................................................... 25

Identiﬁ cation of parts

)

(

EAR

(earphone) jack

2 Notification lamp (LED)

3 Speaker for calls *1

4 Proximity sensor/luminance sensor

5 Touch screen

6 Navigation buttons

7 Strap hole

MIC

(microphone) jack

9 Built-in microphone *1

0 Function button*1

! Slide switch (4-type switch) *1

@ Power switch (f)

# Microphone for calls *1

$ Battery cover

% Docking station connector

^ Location hole for CL3

& Internal Wi-Fi antenna

Do not cover this with a finger or other object.

* Built-in speaker

( Volume buttons

) Battery cover release lever

- USB connector

= Connector for DS-F1

q AC adaptor jack

w USB connector (mini-AB)

e Foot Switch connector

r Ethernet cable connector

t Security Slot

*1 Use depends on the applications you install.

Identification of parts

Getting started

Identiﬁ cation of parts

Identification of parts

Touch screen

4 Home screen

1 Status bar

Indicates the remaining battery power, device

settings, notifications, and other information

with icons.

2 Time display

3 Shortcut (application)

4 a button

Displays a list of applications.

TIP

• The operating instructions in this manual

explain operations performed from the

default Home screen. If, for example, another

application is set as the Home screen, the

explanations and operating procedures in

this manual may differ.

• The screen configuration differs depending

on the operating system version.

Touch screen operations

The device employs a multi-touch interface. The

interface is operated by directly touching it. The

basic operations are described below.

4 Tap

Gently touch a shortcut, list, or other item with a

fingertip and then immediately release your finger.

Use this operation to, for example, select an icon

or item.

Tapping the screen twice with a fingertip is called

a double-tap. Use this operation to, for example,

enlarge an image. Double-tapping the image again

while it is enlarged restores it to its original display

size.

4 Long press

Continue pressing a shortcut, list, or other item

with a fingertip. Use this operation to, for example,

move a shortcut or access a sub menu for the

selected item.

4 Drag

Continue pressing a shortcut, list, or other item

with a fingertip and move your finger to the

desired position without releasing it from the

screen. Use this operation to, for example, adjust

the volume or screen brightness.

4 Flick (Swipe)

Gently swipe the screen with a fingertip. Use this

operation to switch or scroll the screen.

4 Pinch

Place two fingers on the screen and then narrow

the distance between them. Use this operation

to reduce the screen or other item to a size that is

easy to see.

4 Spread

Place two fingers on the screen and then widen

the distance between them. Use this operation to

enlarge the screen or other item to a size that is

easy to see.

NOTE

• Do not push the touch screen forcibly with a

finger or press it with a sharp-pointed object

(fingernail, ballpoint pen, pin, etc.).

• Set the device to power save mode before

carrying it around in a pocket, bag, etc.

• The touch screen may not operate normally

in the following cases. Furthermore, be

careful because the following cases will result

in incorrect operation.

• When touched while wearing gloves.

• When touched with the tip of a fingernail.

• When touched while a foreign object is

on the operating surface.

• When touched while a protective sheet,

sticker, etc. is affixed.

• When touched while the touch screen

is wet.

• When touched with sweaty or wet

fingers.

Touch screen operations

Installing the battery

This device uses a lithium-ion battery specified by

Olympus (LI-92B). Do not use any other type of

battery.

1 To open the battery cover, slide the

battery cover lock release lever in the

direction of the arrow.

2 With the label facing up, align the

terminals on the device and the

battery, then press down in at A, and

set the battery into place by pressing

it inward at B.

As shown, set the battery so that it tucks under the

protruding section of the device.

3 Slide the battery cover until it is

completely closed.

NOTE

• Be sure to firmly close the battery cover (slide

until the battery cover lock clicks).

• Do not close the battery cover if the battery is

not completely inserted.

• Check for any metallic foreign matter or dust

on the terminal of the battery.

• Do not use a battery other than that

specified.

• Turn OFF the device before removing the

battery. Removing the battery while the

device is still in use may cause malfunctions,

file corruption or file loss.

• Remove the battery if you are not going to

use the device for an extended period of

time.

• After removing the battery, it may become

necessary to re-set the time and date if you

leave the battery out of the device for more

than 15 minutes or if you remove the battery

right after loading it into the device.

Installing the battery

Charging the battery

After loading the battery into the device, you

can charge it by connecting the USB cable to

the device, or by using the docking-station in

combination with the USB cable or the AC adapter.

Fully charge the battery (approx. 2 hours 30

minutes) before use.

NOTE

• Lithium-ion batteries are self-discharging. Be

sure to charge the battery before you start

using.

Charging using docking station and AC

adapter

Charging using docking station and USB

cable

Charging directly via USB cable

NOTE

• Charge the battery frequently during the first

period of use. The battery will perform better

after several charge/discharge cycles.

• Models of batteries which are different from

the included one may not be charged.

• Charging the battery via the USB cable

connection may not be successful depending

on the power capacity of the USB port in your

PC. Use the AC adapter instead.

• Do not set or remove the device from the

docking station while operating.

Charging the battery

• Do not charge the device through a USB hub.

• Do not attach or remove the battery if the

USB cable is connected.

Using the lithium-ion battery

The included battery is exclusively for use with

the Olympus VoiSquare DS-F1. Do not use in

combination with other electronic equipment.

Cautions concerning the battery

Read the following instructions carefully when you

use the battery.

4 Discharging:

Rechargeable batteries self-discharge while not in

use. Charge it regularly before use.

4 Battery life:

Over time, the rechargeable battery may gradually

wear down. When the operating time becomes

shorter even if the rechargeable battery is fully

charged under the specified condition, replace it

with a new one.

4 Operating temperature:

Rechargeable batteries are chemical products.

Battery efficiency may vary even when operating

within the recommended temperature range.

This is an inherent nature of these products.

4 Recommended temperature range

of use:

During operation:

0°C - 42°C/ 32°F - 107.6°F

Charging:

5°C - 35°C/ 41°F - 95°F

Storage for a long period:

–20°C - 60°C/ –4°F - 140°F

Using the battery outside the above

temperature range may result in declining

efficiency and shorter battery life.

NOTE

• When disposing the batteries, always observe

the local laws and regulations. Contact your

local recycling center for proper disposal

methods.

• If battery is not fully discharged, protect it

against short-circuiting (e.g. by taping the

contacts) before disposal.

For customers in Germany:

Olympus has a contract with the GRS (Joint Battery

Disposal Association) in Germany to ensure

environmentally friendly disposal.

Battery indicator

The battery indicator on the display will decrease as

the battery loses power.

• When this [ ] indicator appears on the display,

charge the battery as soon as possible. When

the battery is too weak, [ ] and [Power off] will

appear on the display and the device will shut

down.

Turn the power ON

1 While the device is turned OFF, slide

the power switch (f) in the direction

of the arrow for at least 2 seconds.

• The device vibrates and then the lock screen

appears after a short while.

2 Move (drag) the lock icon (h) on the

Home screen to the unlock icon (i)

without removing your finger from

the screen.

Turning the power OFF

Existing data, mode settings and the clock setting

are saved when the power is turned OFF.

1 Slide the power switch (f) in the

direction of the arrow for at least one

second.

2 Tap [

Power off

3 Tap [

TIP

• Turning the power OFF whenever the device

is not in use minimizes battery consumption.

Turn the power ON

Power save mode

When you set power save mode, the screen turns

off and the screen lock is set. This mode prevents

unintended operation of the touch screen when

carrying the device.

1 Slide the power switch (f) in the

direction of the arrow.

TIP

• When the device has been stopped for at

least 15 seconds (default setting) after power

ON, the device automatically enters the

power save mode.

• To release the power save mode, slide the

power switch again.

Force termination

The device may not accept an operation while a

large volume of data is being transferred. Please

wait until the process is finished.

If the screen is still frozen after waiting a short

while, the power can be forcefully turned OFF as

follows.

NOTE

• Please note that the power is being forcefully

turned OFF so any data being processed or

settings being configured may not be saved.

1 Slide the power switch (f) in the

direction of the arrow for at least 5

seconds.

Memory card

The device has its own internal memory, and also

supports standard microSD cards (SD, SDHC) sold

separately. Some applications may allow you to

select either the internal memory or a microSD card

as the save location.

Compatible cards

The device supports memory card capacity from 2

GB up to 32 GB.

NOTE

• Before replacing a microSD card, turn OFF the

power of the device.

Inserting a micro SD card

Turn the power OFF.

Remove the battery cover and then

remove the battery (☞P.6).

Insert the micro SD card fully into

the card slot with the card facing the

direction shown in the illustration

below, until it clicks into place.

Ejecting a micro SD card

1 Push the microSD card inward to

unlock it and let it come out of the

slot.

• Hold the card straight and pull it out.

Cards compatibility

For a list of card compatible with the device,

please visit the product homepage at the Olympus

website applicable to your region or contact your

Olympus dealer where you purchased the product.

NOTE

• Inserting the card the wrong way or at an

angle could damage the contact area or

cause the card to jam.

• If the card is not inserted all the way into the

slot, data may not be written properly.

• After pushing the card inward to eject it,

releasing your finger too quickly may cause

the card to be ejected unexpectedly.

• The device may not properly recognize the

card even when that card is compatible

with it.

• The processing performance reduces in a

card when you repeat writing and deleting. In

this case, format the card.

Memory card

Various Settings

Settings list

4 Wi-Fi

Turn on/off the Wi-Fi function.

• When Wi-Fi is connected, battery life is shorter.

If the battery runs out during data transfer, the

data may be damaged. Therefore, when using a

Wi-Fi connection we recommend that you use

the AC adapter included with the device.

4 Data usage

Check data usage for communication via the

network.

4 More...

Set VPN (Virtual Private Network) or airplane mode.

4 Sound

Set functions related to the sound of the device

such as the volume or notification ringtone.

4 Display

Set functions related to the screen of the device

such as the brightness or sleep.

4 Storage

Check information related to the memory of the

device such as the available space or used space.

4 Battery

Check information related to the battery of the

device such as battery usage.

4 Apps

Check information on the installed applications.

4 Users

Check detailed user information.

4 Security

Set functions related to the security of the device

such as the screen lock or password.

4 Language & input

Set functions related to the text of the device such

as the display language or text input.

4 Backup & reset

Return the device to its initial state.

4 Add account

be used.

4 Date & time

Set the date and time of the device.

4 Accessibility

Set accessibility for operation.

4 About device

Check the device information.

Various Settings

Device care

Other information

s Exterior

Wipe gently with a soft cloth. If the device is very

dirty, soak the cloth in mild soapy water and

wring well. Wipe the device with the damp cloth

and then wipe it with a dry cloth.

s Monitor

Wipe gently with a soft cloth.

Using alcohol disinfectant solution

• Make sure that your device is turned OFF.

• Do not use other than ethanol for

disinfection (76.9 to 81.4 v/v%) and

isopropanol for disinfection (70 v/v%).

Soak a soft cloth in the disinfectant

solution and then wring the cloth to

prevent dripping.

2 Wipe the device gently.

Wipe the device well with a soft dry

cloth so that no solution remains.

f CAUTION

• Do not use disinfectant solution to clean

the LED and each sensor.

• Do not rub the device strongly when using

disinfectant solution. The paint or print

may peel off.

• Do not spray disinfectant solution directly

onto the device. The device does not have

a waterproof design so solution may enter

inside the device and affect the electronic

parts.

Device care

Troubleshooting

Problem Possible cause Solution

Power does not turn ON.

The battery has run out of power. Charge the battery (☞P.7).

The battery is not inserted

properly. Insert the battery properly (☞P.6).

Charging is not possible.

The battery is not inserted

properly. Insert the battery properly (☞P.6).

The AC adapter is not connected

to the docking station properly. Connect the AC adapter properly (☞P.7).

The protective function is

activated.

If the temperature of the device becomes very

high, the protection function may be activated and

may stop charging automatically. Wait until the

temperature drops and then perform charging again.

The power of the USB device

is OFF.

Before charging from a USB device, turn ON the

power of the USB device.

Touch screen does not

operate normally.

The power is OFF. Turn the power ON (☞P.9).

The battery has run out of power. Charge the battery (☞P.7).

The screen lock is enabled. Disable the screen lock (☞P.9).

The operating procedure is

incorrect.

Use the correct procedure to operate the touch

screen. Do not push the touch screen forcibly with a

finger or press it with a sharp-pointed object such as

a fingernail, ballpoint pen, pin, etc. (☞P.5).

A protective sheet is affixed to

the display.

Correct operation may not be possible depending on

the type of protective sheet.

Response of the screen is

slow when it is tapped or a

key is pressed.

The platform is processing data.

This may occur when saving a large volume of data

or when moving or copying a large volume of data

between the internal memory and microSD card.

Touch screen went black. The device is in power save mode. Cancel power save mode (☞P.10).

Troubleshooting

Problem Possible cause Solution

Screen light is dark.

The screen is set to a dark level. Increase the brightness in the [Brightness] setting of

[Display] (☞P.12).

The proximity sensor/luminance

sensor is covered.

Do not cover the proximity sensor or luminance

sensor of the device with a finger, protective sheet, or

other object (☞P.3).

Screen display does not

change when changing the

orientation of the device.

The [Auto-rotate screen] setting

is disabled.

Enable the [Auto-rotate screen] setting of [Display]

(☞P.12).

Device becomes hot during

operation and charging.

The device is being operated for a

long time during charging.

If the device is operated for a long time during

charging, the device or internal battery may become

hot but this is not abnormal. If the device becomes

too hot to touch, turn OFF the power of the device

to stop operation and then ask Olympus Customer

Support Center to inspect and repair the device.

Screen does not change and

power does not turn OFF. The platform is processing data.

The device may not accept an operation while a large

volume of data is being transferred. Please wait until

the process is finished.

If the screen is still frozen after waiting a short while,

the power can be forcefully turned OFF *1 (☞P.10).

Battery usage time is short. The battery has deteriorated.

Battery usage time differs depending on the

operating environment. If the usage time has

become extremely short even after fully charging the

battery, it is time to replace the battery so purchase a

new battery of the designated type (LI-92B).

Cannot connect to a Wi-Fi

network.

The Wi-Fi function is set to [OFF]. Change the [Wi-Fi] setting to [ON] (☞P.12).

The connection settings of the

W-Fi network are incorrect. Check the settings of the Wi-Fi function.

An obstacle is blocking the signal

between the communication

devices.

Check whether or not there is an obstacle blocking

the signal between the communication devices.

*1 Please note that the power is being forcefully turned OFF so any data being processed or settings being

configured may not be saved.

Wi-Fi Function

4 The Wi-Fi function of the device is

designed to be used in the following

regions.

America:

United states, Canada

Europe:

Austria, Belgium, Bulgaria, Cyprus, Czech

Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Ireland, Italy, Latvia,

Lithuania, Luxembourg, Malta, Netherlands,

Poland, Portugal, Romania, Slovakia, Slovenia,

Spain, Sweden, United Kingdom, Iceland,

Liechtenstein, Norway, Switzerland, Croatia,

Turkey

Oceania:

Australia, New Zealand

Do not use the Wi-Fi function of the device in

regions other than those mentioned above.

Also do not use the Wi-Fi function in other

than the country or region of purchase.

Using the function could violate the radio

signal restrictions in that country. We will

assume no responsibility whatsoever for the

use of this technology.

4 Communication may be affected if

there are reinforced structures, metal

or concrete between the device and

the Wi-Fi access point.

4 Near a microwave, cordless telephone

set, or device that uses the 2.4GHz

frequency band, if the device is used at

the same time with such an equipment,

communication performance may be

affected. When using the device, keep

a sufficient distance away from such

equipments.

4 To the extent possible, try not to

use the device near mobile phones,

televisions, or radios.

Mobile phones, PHS, TV sets, and radios use

different frequencies than the device but

electromagnetic waves generated from Wi-Fi

products including this device could generate

noise in audio or video images.

Notes on security when using Wi-Fi products

• With a Wi-Fi connection, information is

exchanged wirelessly and as long as radio signals

reach the unit, flexible connection is possible.

However, because radio signals can penetrate

through obstacles (wood, glass, etc.), if there is no

security-related setting, the following problems

could occur.

• A malicious third party intentionally

intercepts radio signals to spy on

communication content.

• Unauthorized intrusion causes the leaking of

important information.

• Intercepted communication contents are

rewritten and transmitted.

• Destructive computer viruses are released

that can destroy data or systems.

For security protection, we recommend to change

the password periodically using the [Wi-Fi]

function of the device (☞P.12).

• Should a problem occur for an inevitable reason

due to the specifications of the Wi-Fi connection,

we assume no responsibility whatsoever for any

damage incurred.

Wi-Fi Function

Trademarks and registered trademarks

• The product uses MP3 audio coding technology licensed from Fraunhofer IIS and Thomson.

• microSD and microSDHC are trademarks of SD Card Association.

• Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Wi-Fi CERTIFIED logo is a certification mark of the

Wi-Fi Alliance.

• Android is trademarks or registered trademark of Google Inc.

• VoiSquare is registered trademark of Olympus Corporation.

All other brand or product names in this manual are the trademarks or registered trademarks of their

respective owners.

Notes

f WARNING

s When using the device in a medical institution, follow the instructions of that medical

institution.

Turn OFF the power of the device when near electronic equipment that handles high-precision control or

weak signals. The electronic equipment may malfunction or otherwise be adversely affected.

s Keep a distance of at least 22 cm from the location where a pacemaker is implanted.

Electric waves from this device could affect the operation of a pacemaker.

s Turn OFF the device power when on airplane.

Security of the service could be affected.

Safety precautions

Before using the device, read this manual to

ensure correct and safe operation. After reading

this manual, be sure to keep it on hand for ready

reference whenever needed.

Important safety precautions

• Important items about safety are indicated by

the following display and sentences. Always

follow these precautions to prevent harming

yourself or others, or causing damage to

property.

• The meaning of each precaution type is given

below.

f DANGER

A precaution about an imminent danger

that is expected to result in death or serious

injury if equipment is handed incorrectly.

f WARNING

A precaution about a situation that is

expected to potentially result in death

or serious injury if equipment is handled

incorrectly.

f CAUTION

A precaution about a situation that is

expected to potentially result in injury, or is

expected to result only in property damage,

if equipment is handled incorrectly.

Caution for usage environment

s To protect the high-precision

technology contained in this device,

never leave the device in the places

listed below, no matter if in use or

storage.

• Places where temperatures and/or humidity

are high or go through extreme changes.

Direct sunlight, beaches, locked cars, or near

other heat sources (stove, radiator, etc.) or

humidifiers.

• Near flammable items or explosives.

• In wet places, such as bathrooms or in the

rain.

• In places prone to strong vibrations.

s Never drop the device or subject it to

severe shocks or vibrations.

s Near a microwave, cordless telephone

set, or device that uses the 2.4GHz

frequency band, if the device is used at

the same time with such an equipment,

communication performance may be

affected. When using the device, keep

a sufficient distance away from such

equipments.

s To the extent possible, try not to

use the device near mobile phones,

televisions, or radios.

• Mobile phones, PHS, TV sets, and radios use

different frequencies than the device but

electromagnetic waves generated from Wi-Fi

products including this device could generate

noise in audio or video images.

Safety precautions

• Recorded content in the internal memory and

microSD card may be destroyed or lost due to

reasons such as operating errors, device failure

or repair.

• Also, when content is saved in the memory

for long period of time or is used repeatedly,

operations such as writing to, reading from, or

erasing of contents may not be possible.

• Making a backup of important recorded

information and saving it on a PC’s hard disk or

other recording media is recommended.

• Note that Olympus will assume no liability for

damages or lost earnings resulting from recorded

data damage or loss, regardless of the nature or

cause thereof.

• Note that Olympus will assume no liability

for recorded files being erased or becoming

unplayable due to device or PC failure.

• Recording of copyrighted material is permitted

when the recording is for your personal use only.

Any other type of use without the permission of

the copyright owner is prohibited by copyright

law.

• Even when data is formatted or erased, only the

management information of the file is updated and

the data that was recorded on the microSD card or

internal memory is not completely erased.

When disposing of an microSD card, be sure to

destroy the card, format the card and record silence

until the recording time runs out, or perform a

similar operation in order to prevent the leakage of

personal information.

Device safety precautions

f WARNING

s Do not use the device in an atmosphere

that might contain flammable or

explosive gases.

This may cause fire or explosion.

s Do not attempt to disassemble, repair

or modify the device.

This may cause electric shock or injury.

s Do not operate the device while

operating a vehicle (such as a bicycle,

motorcycle or car).

This may cause traffic accidents.

s Do not leave the device in a location

accessible to an infant or child.

Pay attention when using the device near

an infant or child, taking care not to leave it

unattended. Infants and children are unable to

understand the device safety precautions, and

are at risk of accidents such as:

− Strangulation caused by accidental

entanglement of the earphone cord around

the neck.

− Operation errors resulting in injury or electric

shock.

s Use microSD/SDHC memory cards only.

Never place other types of cards in the

device.

If another card type is placed in the device

by accident, do not try to pull it out by force.

Contact an Olympus repair center or service

center.

Safety precautions

s If the device is dropped in water or, if

water, metal or combustible foreign

matter gets inside:

1 Remove the battery immediately.

2 Contact your place of an authorized

distributor or service center for repair.

Continued use may result in fire or electric

shock.

s Do not use the device or use it only as

directed in airplanes or other locations

where use of electronic devices is

restricted.

s Stop using the device if you notice

unusual odor, noise, or smoke coming

from it.

This may cause fire or burns. Remove the battery

immediately, taking care not to burn yourself.

Contact your place of an authorized distributor

or service center. (Do not touch the battery

with bare hands when removing it. Remove the

battery outdoors, and away from flammable

objects.)

s When carrying the device by its strap,

take care to prevent it becoming caught

on other items.

s Do not touch for an extended period

of time an energized AC adapter or

battery while it is charging.

The temperature of the AC adapter or battery

being charged rises. Low-temperature burns

may result if your skin touches the AC adapter

or battery being charged for extended period

of time.

s Use only Olympus’ special lithium-ion

battery, charger, and AC adapter.

Attempting to use other equipment could

cause fire or electric shock due to heating,

deformation, etc. Also, the power of the

device could fail or an unexpected accident

could occur. We assume not responsibility

for problems as a result of using other than

specified products.

f CAUTION

s Do not raise the volume before

performing an operation.

Hearing damage or loss may result.

Batteries

f DANGER

s Do not place the battery near ignition

sources.

s Do not incinerate, heat or disassemble

the battery. Do not short-circuit

the battery’s positive and negative

electrodes.

This may cause fire, ruptures, combustion or

overheating.

s Do not solder connections directly onto

the battery. Do not deform, modify or

disassemble the battery.

s Do not connect the battery’s positive

and negative terminals.

This may cause overheating, electric shock or

fire.

Safety precautions

s When carrying or storing the battery,

always place it in the case to protect

its terminals. Do not carry or store the

battery together with precious metal

items such as key rings.

This may cause overheating, electric shock or

fire.

s Do not connect the battery directly to a

power outlet or car cigarette lighter.

s Do not use or leave the battery in a

hot location such as in direct sunlight,

inside a vehicle on a hot day, or near a

room heater.

This may cause fire, burns or injuries from

leaking, overheating or ruptures.

f WARNING

s Do not touch or hold the battery with

wet hands.

This may cause electric shock or malfunctions.

s Do not use a battery with a scratched or

damaged case.

This may cause ruptures or overheating.

s Do not insert the battery with its

positive/negative terminals in the

opposite direction.

This may cause leaking, overheating,

combustion or ruptures.

• Do not use a battery with a torn casing seal

(insulating covering).

• Always remove the battery when the device

will not be used for an long period.

• When disposing used batteries, insulate

their contacts with tape and discard them as

general waste in the manner prescribed by

the local authority.

• Remove the battery from the device as soon

as the battery becomes unusable. This may

cause leakage.

s Battery fluid in the eyes may cause

blindness. If battery fluid gets in eyes,

do not rub the eyes. Instead, rinse them

thoroughly with tap water or other

clean water right away. Go to doctor

immediately.

s Keep the battery out of the reach of

infants and children.

The battery could be swallowed by an infant or

child. If swallowed, go to doctor immediately.

s If you notice abnormal sound, heat,

burning odor or smoke from the device

during use:

1 Remove the battery immediately, taking care

not to injure yourself.

2 Have the device repaired by your place of

an authorized distributor or service center.

Continued use may result in fire or burns.

s Do not submerge the battery in

freshwater or saltwater, or allow its

terminals to become wet.

s Discontinue use of the battery if it

develops a problem such as leaking,

discoloration or deformation.

s Stop charging the rechargeable battery

if charging has not finished after the

specified amount of charging time.

s Battery fluid on clothing or skin may

damage the skin, so rinse the battery

fluid off right away with tap water or

other clean water.

Safety precautions

f CAUTION

s Do not throw the battery around, or

subject it to strong shocks.

s Always charge the rechargeable battery

before use when using it for the first

time or if it has not been used for a long

time.

s There is a risk of explosion if the battery

is replaced with the incorrect battery

type.

Dispose of the used battery following

the instructions.

• Please recycle batteries to help save our

planet’s resources. When you throw away

dead batteries, be sure to cover their

terminals and always observe local laws and

regulations.

s Rechargeable batteries have a limited

life. When the device operating time

becomes shorter after recharging under

the specified condition, please consider

that battery is expired and replace it

with a new one.

Disposing the rechargeable battery

s Recycling batteries helps saving

resources. When disposing a used

battery, always cover its terminals and

observe local laws and regulations.

Operating precautions

• Do not leave the device in hot or humid

locations such as in direct sunlight inside a

vehicle, or on a beach during summer.

• Do not store the device in humid or dusty

locations.

• If the device becomes wet or damp, wipe off the

moisture right away with a dry cloth. Contact

with salt water should be particularly avoided.

• Do not place the device on top of or near a TV,

refrigerator or other electrical appliance.

• Prevent sand or mud from getting on the device.

This may cause product not to be repairable.

• Do not subject the device to intense vibrations

or shocks.

• Do not use the device in humid locations.

• Placing a magnetic card (such as a bank cash

card) near the speaker or earphones may cause

errors in the data stored on the magnetic card.

Docking station

f DANGER

s Never disconnect the AC adapter or

power cord with a wet hand. This may

cause electric shock or injury.

s Only use the specified AC adapter

with the docking station. Using it in

combination with other AC adapters

may cause overheating, fire, or

malfunction.

f WARNING

s Never disassemble, modify, or repair

the docking station yourself. This may

cause fire, electric shock, or injury.

s Never use the docking station in

locations where it might come into

contact with liquids. Getting the

docking station wet may cause fire or

electric shock.

Safety precautions

s Do not drop the docking station or

allow it to suffer extreme shocks. This

may cause damage, or fire or electric

shock.

s Do not touch the connector or insert

the metal wires or similar object into

any of the plugs. This may cause fire, or

electric shock.

f CAUTION

s Unplug the AC adapter or power cord

from the docking station and AC outlet

when not using for extended periods of

time. If this precaution is not followed

and the docking station is damaged

then fire may occur.

AC adapter

f DANGER

s Be sure to use the AC adapter with the

proper voltage (AC 100 - 240 V).

Using it with other voltage levels may cause fire,

explosion, overheating, electric shock or injury.

s For your safety, be sure to unplug the

AC adapter from the outlet before

performing maintenance or cleaning.

Also, never plug in or disconnect the power plug

with a wet hand. This may cause electric shock

or injury.

f WARNING

s Do not attempt to disassemble, repair

or modify the AC adapter in any way.

This may cause electric shock or other injury.

s Do not use the AC adapter in the

vicinity of flammable gas (including

gasoline, benzine and lacquer thinner).

This may cause explosion, fire, or burns.

s Do not short circuit the = and - at the

plug end.

This may cause fire, burns or electric shock.

s If internal material is exposed due to

dropping or damage:

1 Never touch exposed internal material. Doing

so could cause electric shock, burns or other

injury.

2 Immediately disconnect the power supply

plug from the power outlet, and;

3 Call your dealer or local Olympus

representative for servicing. Continued use

may result in fire or burns.

s If the AC adapter is submerged in

water or, if water, metal or combustible

foreign matter gets inside:

1 Disconnect the power plug from the outlet.

2 Call your dealer or local Olympus

representative for servicing. Continued use

may result in fire or electric shock.

s If you notice abnormal sound, heat,

burning odor or smoke from the AC

adapter during use:

1 Remove the battery immediately, taking care

not to injure yourself.

2 Call your dealer or local Olympus

representative for servicing. Continued use

may result in fire or burns.

Safety precautions

f CAUTION

s Do not moisten the AC adapter or touch it

with a wet hand.

Doing so could cause electric shock or other

injury.

s Only use the AC adapter with the

specified power supply voltage.

s Do not attempt to insert a power plug

with dust adhering into an outlet.

s Do not use the AC adapter if the power

plug is damaged or the plug is not

completely connected to the outlet.

s Unplug the AC adapter from AC outlet

when not using.

s Do not damage the power cord.

• Make sure to hold the plug when removing

the power plug from the outlet.

• Do not place heavy objects on the cord.

• Do not bring the cord near heating

equipment.

• This may cause fire or electric shock.

LCD monitor

s The LCD used for the monitor is made

with high-precision technology.

However, black spots or bright spots of

light may appear constantly on the LCD

Monitor. Due to its characteristics or

the angle at which you are viewing the

monitor, the spot may not be uniform

in color and brightness. This is not a

malfunction.

Precautions for touch screen

s The LCD screen is made of glass. If the

glass is cracked or otherwise damaged,

do not touch the touch screen or

attempt to repair it yourself.

Be careful when handling the LCD

screen because it may be damaged if it

is dropped or subjected to an impact.

Damage resulting from inappropriate

handling is not covered by the

warranty.

Speciﬁ cations

Specifications

General points

4 Operating System

AndroidTM 4.3

4 Storage*

Internal NAND FLASH memory: 8 GB

microSD/microSDHC card:

Supports 2 GB to 32 GB

* Some recording media memory capacity is

used as a management area, so the actual

usable capacity will always be slightly less

than the displayed capacity.

4 Display

Size: 3.7 inches

Resolution: 854 x 480 pixels (FWVGA)

Type: TFT color LCD

4 Speaker

Built-in ø20 mm round dynamic speaker

4 Maximum working output

280 mW (8 speaker)

4 Maximum headphone output

â 150 mV (conforms to EN 50332-2)

4 Wireless standards

Complies with IEEE802.11b/g/n*

* IEEE802.11n is compatible with only the

2.4 GHz band

• The communication speed and distance may

vary depending on ambient conditions such

as the radio environment, obstacles and

installation environment.

Security

WEP, WPA/WPA2 Personal,

WPA/WPA2 Enterprise

MIC

jack

ø3.5 mm impedance 2 k

EAR

jack

ø3.5 mm impedance 8 or more

4 Power source

Standard voltage: 3.6V

Battery: Lithium-ion battery (LI-92B)

External power supply: USB connection,

AC adapter (A517) (DC5V)

4 External dimensions

114 mm × 63.8 mm × 14.6 mm

(Not including largest projection)

4 Weight

140 g (including battery)

4 Operating temperature

0 to 42°C (32 to 107.6°F)

Battery life

The figures below are guideline values.

Operating time: XX hours (approx)

Specifications and design are subject to change

without notice.

Battery life is measured by Olympus. It varies

greatly according to the conditions of use.

Accessories (optional)

Docking Station: CR20

This product is designed specifically for Olympus

DS-F1, keeping it safe and secure.

Clip: CL3

This product is designed to protect your DS-F1

from accidental drops.

Lithium-ion battery: LI-92B

This lithium-ion rechargeable battery is

manufactured by Olympus. It is best paired with

the UC-90 battery charger.

Battery charger: UC-90

This product is designed for LI-92B.

Foot Switch: RS31

Connect to the USB docking station with DSF1 for

hands-free transcription.

Noise-cancellation microphone: ME12

(Dictation microphone)

Used to get crisp recordings of your own voice by

reducing the effects of ambient noise.

Recommended to improve the accuracy when

using voice-recognition software.

External microphone: ME15

A lavalier omni-directional microphone that clips to

clothing. Used to record your own voice or people

near you.

Highly sensitive noise-cancellation monaural

microphone: ME52W

This microphone is used to record sound at a

distance while minimizing surrounding noise.

Technical assistance and support

The device is part of the Olympus Professional

Dictation System. Your certified professional dealer

has been fully trained on the entire Olympus

Professional Dictation range, including dictation,

transcription devices and software. For technical

assistance and guidance relating to installation and

set up, please contact your professional dealer from

whom you purchased the system.

For customers in North America

4 For customers in USA

Declaration of Conformity

Model Number: DS-F1

Trade Name: OLYMPUS

Responsible Party: OLYMPUS IMAGING

AMERICA INC.

Address: 3500 Corporate Parkway, P.O. Box 610,

Center Valley, PA 18034-0610, U.S.A.

Telephone Number: 484-896-5000

Tested To Comply With FCC Standards

FOR HOME OR OFFICE USE

This device complies with Part 15 of FCC Rules and

Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two

conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may

cause undesired operation of this device.

4 For customers in CANADA

CAN ICES-3 (B) / NMB-3 (B)

FCC CAUTION

Changes or modifications not expressly

approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

This transmitter must not be co-located or

operated in conjunction with any other antenna

or transmitter.

To maintain compliance with FCC's RF exposure

guidelines, use only the supplied antenna.

Unauthorized antenna, modification, or

attachments could damage the transmitter and

may violate FCC regulations.

FCC Notice

● This equipment has been tested and found

to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation.

● This equipment generates, uses, and can radiate

radio frequency energy and, if not installed

and used in accordance with the instructions,

may cause harmful interference to radio

communications.

● However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference

to radio or television reception, which can be

determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following

measures:

• Adjust or relocate the receiving antenna.

• Increase the distance between the

equipment and receiver.

• Connect the equipment to an outlet on

a circuit different from that to which the

receiver is connected.

• Consult your dealer or an experienced radio/

TV technician for help.

•Only the OLYMPUS supplied USB cable

should be used to connect the equipment

to USB enabled personal computers (PC).

Any unauthorized changes or modifications to

this equipment would void the user’s authority to

operate it.

DS-F1 is equipped with WLAN device with IC and

FCC ID:

– FCC ID: YSKA01,

– IC: 4763EA01

The available scientific evidence does not show

that any health problems are associated with using

low power wireless devices. There is no proof,

however, that these low power wireless devices

are absolutely safe. Low power Wireless devices

emit low levels of radio frequency energy (RF) in

the microwave range while being used. Whereas

high levels of RF can produce health effects (by

heating tissue), exposure of low-level RF that does

not produce heating effects causes no known

adverse health effects. Many studies of low-level

RF exposures have not found any biological

effects. Some studies have suggested that some

biological effects might occur, but such findings

have not been confirmed by additional research.

DS-F1 has been tested and found to comply with

FCC/IC radiation exposure limits set forth for an

uncontrolled environment and meets the FCC radio

frequency (RF) Exposure Guidelines in Supplement

C to OET65 and RSS-102 of the IC radio frequency

(RF) Exposure rules. SAR testing has been done at a

distance of 0 cm from the body and the head.

Hereby, OLYMPUS, declares that VoiSquare is

in compliance with the essential requirements

and other relevant provisions of Directive

1999/5/EC.

For details visit: http://olympus-europa.com/

SAR testing has been done at a distance of

0 cm from the body and the head.

This product supports WLAN.

Radio function of this equipment is not allowed

to use in the geographical area within a radius

of 20 km from the centre of Ny-Alesund on

Svalbard.

For customers in Europe

The “CE” mark indicates that

this product complies with the

European requirements for safety,

health, environment and customer

protection. CE-mark products are

for sale in Europe.

This symbol [crossed-out wheeled

bin WEEE Annex IV] indicates

separate collection of waste electrical

and electronic equipment in the EU

countries. Please do not throw the

equipment into the domestic refuse.

Please use the return and collection

systems available in your country for

the disposal of this product.

This symbol [crossed-out wheeled

bin Directive 2006/66/EC Annex

II] indicates separate collection of

waste batteries in the EU countries.

Please do not throw the batteries

into the domestic refuse. Please use

the return and collection systems

available in your country for the

disposal of the waste batteries.

275

MEMO

EN-BS1577-01 AP1408

2951 Ishikawa-machi, Hachioji-shi, Tokyo 192-8507, Japan.

http://www.olympus.com

OLYMPUS IMAGING CORP.

3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A.

Tel. 484-896-5000

http://www.olympusamerica.com

OLYMPUS IMAGING AMERICA INC.

(Premises) Consumer Product Division

Wendenstrasse 14 - 18, 20097 Hamburg, Germany.

Tel. :+49 40 -23 77 3-0 / Fax +49 40 - 23 07 61

(Goods delivery) Modul H, Willi-Bleicher Str. 36, 52353 Düren, Germany.

(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.

http://www.olympus-europa.com

OLYMPUS EUROPA SE & CO. KG

Ground Floor, 82 Waterloo Road, Macquarie Park NSW 2113, Australia

PO Box 1991 Macquarie Centre NSW 2113

Tel: +61 2 9886 3992

http://www.olympus.com.au

OLYMPUS IMAGING AUSTRALIA PTY LTD.

Olympus A01 WLAN+BT_Combo module User Manual DS F1 host

Olympus Corporation WLAN+BT_Combo module DS F1 host

Contents

User manual_DS-F1 host

Navigation menu

Namespaces

Views

Navigation