Olympus E 10 Pixel Mapping Instructions English Fran Ais 45 3 Kb 10_Pixel_Mapping_Feature_EN_FR
2014-07-06
: Olympus E-10-Pixel-Mapping-Instructions-English-Fran-Ais-45-3-Kb e-10-pixel-mapping-instructions-english-fran-ais-45-3-kb olympus pdf
Open the PDF directly: View PDF .
Page Count: 1
Download | |
Open PDF In Browser | View PDF |
VT319601.qxp 7/13/1 3:37 AM Page 1 English Automatic Pixel Mapping Feature The automatic pixel-mapping feature can be used to re-map CCD pixels. The pixel mapping feature can be turned ON or OFF in the setup menu. 1 With the camera on, turn the mode dial to setup/connection mode, and then press the menu button . 2 Using the arrow pad, press moving the green highlight to the Pixel Map feature, and then move the green highlight to ON. 3 Press the button twice and then turn the camera’s power OFF. 4 Remove the camera’s batteries and AC adapter from the camera for three minutes. 5 Reinstall the batteries, select a mode other than setup, and turn the camera’s power ON. A pixel check is automatically performed (see figure B). Pixel mapping requires approximately 10 seconds to complete. Wait for pixel mapping to finish before using the camera. If pixel mapping is not completed successfully, a message will prompt you to correct the problem (see figure C). In this case, lower (close) the eyepiece shutter lever on the left side of the viewfinder and return to step 4. Français Fonction Pixel Mapping automatique La fonction de Pixel Mapping automatique peut être utilisée pour reprogrammer les pixels CCD. Cette fonction peut être ACTIVEE ou DESACTIVEE à partir du menu de configuration. 1 L'appareil-photo allumé, réglez le bouton gradué sur mode de configuration/ connexion puis, appuyez sur le bouton menu . 2 A l'aide du mini-clavier, appuyez sur pour déplacer la surbrillance verte sur la fonction Pixel Map puis, déplacez la surbrillance verte sur ON. 3 Appuyez deux fois sur le bouton puis, éteignez l'appareil-photo. 4 Retirez les piles et l'adaptateur AC de l'appareil-photo pendant trois minutes. 5 Réinstallez les piles, sélectionnez un mode autre que configuration et allumez l'appareil-photo. Un contrôle de pixels est exécuté automatiquement (voir Ecran B). Le Pixel Mapping dure une dizaine de secondes environ. Attendez que le Pixel Mapping soit terminé avant d'utiliser l'appareil-photo. Si le Pixel Mapping ne se termine pas normalement, un message vous convie à rectifier le problème (voir Ecran C). Dans ce cas, abaissez (fermez) le levier de l'obturateur de l'oculaire situé à gauche du viseur puis, retournez à l'étape 4. Figure A Ecran A Figure B Ecran B Figure C Ecran C VT319601
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Encryption : Standard V4.4 (128-bit) User Access : Print, Extract, Print high-res Author : OLYMPUS IMAGING CORP. Create Date : 2009:12:31 12:01:50-05:00 Keywords : E-10, E10, E 10, Pixel Mapping, Operation, Function, Automatic Pixel Mapping, Documentation Modify Date : 2009:12:31 12:17:15-05:00 XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2009:12:31 12:17:15-05:00 Creator Tool : QuarkXPressª: PSPrinter 8.3.1 Format : application/pdf Title : E-10_Pixel_Mapping_Feature_EN_FR.pdf Creator : OLYMPUS IMAGING CORP. Subject : E-10, E10, E 10, Pixel Mapping, Operation, Function, Automatic Pixel Mapping, Documentation Document ID : uuid:a64c2d5c-16b2-447e-b043-a9279fe888ee Instance ID : uuid:f48ec818-78a4-429c-8353-9b55b19c8d3c Producer : Acrobat Distiller 4.0 for Macintosh Page Count : 1EXIF Metadata provided by EXIF.tools