Olympus Ws 600S Instructions 710M_WS 700M_WS 600S_Instructions_EN

Ws-700M-Instructions ws-700m-instructions

Ws-710M-Instructions ws-710m-instructions

Power Macintosh 8100 Series WS-710M_WS-700M_WS-600S_Instructions_EN

700M to the manual 6213bf7f-881a-4082-b2dd-279d4035fbae

2014-07-06

: Olympus Ws-600S-Instructions ws-600s-instructions olympus pdf

Open the PDF directly: View PDF .
Page Count: 92

DETAILED

INSTRUCTIONS

DIGITAL VOICE

RECORDER

Thank you for purchasing an Olympus

Digital Voice Recorder.

Please read these instructions for information

about using the product correctly and safely.

Keep the instructions handy for future reference.

To ensure successful recordings, we recommend that

you test the record function and volume before use.

and get additional benefits from Olympus!

Introduction

• The contents of this document may be changed in the future without advanced notice.

Contact our Customer Support Center for the latest information relating to product names

and model numbers.

• The illustration of the screen and the recorder shown in this manual may differ from the

actual product. The utmost care has been taken to ensure the integrity of this document

but if you find a questionable item, error or omission, please contact our Customer

Support Center.

• Any liability for passive damages or damage of any kind occurred due to data loss incurred

by a defect of the product, repair performed by the third party other than Olympus or an

Olympus authorized service station, or any other reason is excluded.

Trademarks and registered trademarks

• IBM and PC/AT are the trademarks or registered trademarks of International Business

Machines Corporation.

• Microsoft, Windows and Windows Media are registered trademarks of Microsoft

Corporation.

• Macintosh and iTunes are the trademarks of Apple Inc.

• microSD and microSDHC are the trademarks of SD Card Association.

• MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.

• EUPHONY MOBILE™ is a trademark of DiMAGIC Corporation.

• DVM™ is a trademark of DiMAGIC Corporation.

• The product was developed based on noise-canceling technology under license from NEC

Corporation.

Other product and brand names mentioned herein may be the trademarks or registered

trademarks of their respective owners.

Table of contents

Introduction

Safe and proper usage ....................................... 4

1 Getting started

Main features .................................................... 6

Identification of parts ....................................... 7

Display (LCD panel) ....................................................8

Power supply ....................................................10

Inserting batteries ..................................................10

Battery settings .......................................................12

Charging by connecting to a computer via USB ......12

Connect to the USB connecting AC adapter

(optional) to charge ..........................................13

Turning on/off the power ........................................15

HOLD ................................................................16

Setting time and date [Time & Date] .................17

Changing the time and date ....................................18

Inserting and ejecting a microSD card ...............19

Inserting a microSD card .........................................19

Ejecting a microSD card ...........................................20

[Home] display operations ................................21

Notes on the folders .........................................22

About the folders for voice recordings ....................22

About the folder for music playback .......................23

Selecting the folders and files ..........................24

2 About recording

Recording .........................................................2 5

Changing the recording scene [Rec Scene] .............27

Recommended settings by recording condition ....28

Recording from external microphone or other

dev i ce s ...............................................................2 9

3 About playback

Playback ..........................................................31

Setting an index mark or a temp mark ...................35

Changing the playback speed .................................36

How to begin segment repeat playback .................37

Changing the playback scene [Play Scene] .............38

Er asin g .............................................................39

Erasing files .............................................................39

Erasing a folder ........................................................39

4 About the FM radio

(For WS-710M only)

Using the FM radio ............................................41

FM radio mode operations ................................42

Presetting radio stations automatically

[Auto-preset] ....................................................43

Changing the reception mode ................................44

Adding a radio station .............................................45

Recording FM radio .......................................... 46

5 Menu setting

Menu setting method .......................................47

+ File Menu ............................................................49

, Rec Menu ............................................................49

- Play Menu ...........................................................53

. LCD/Sound Menu................................................56

/ Device Menu .......................................................57

 FM Menu .............................................................59

Rearranging files [Replace] .....................................59

Dividing files [File Divide] .......................................60

Changing the USB class[USB Settings] ....................61

Formatting the recorder [Format] ..........................63

6 Using the recorder on your PC

Operating environment ....................................65

Connecting to your PC .......................................67

Disconnecting from your PC ....................................68

Transfer the voice files to your PC .....................69

Using Windows Media Player ............................70

Window names ........................................................70

Copying music from CD............................................71

Transferring music file to the recorder ...................72

Copying voice file to the CD .....................................75

Using iTunes .....................................................77

Window names ........................................................77

Copying music from CD............................................78

Transferring music file to the recorder ...................79

Copying voice file to the CD .....................................80

Using as external memory of the PC ..................81

7 Other information

Alarm message list ...........................................82

Trou ble sho o tin g ...............................................8 3

Accessories (optional) .......................................86

Specifications...................................................87

Technical assistance and support ......................91

Before using your new recorder, read

this manual carefully to ensure that

you know how to operate it safely

and correctly. Keep this manual in an

easily accessible location for future

reference.

• The warning symbols indicate

important safety related

information. To protect yourself

and others from personal injury or

damage to property, it is essential

that you always read the warnings

and information provided.

General precautions

• Do not leave the recorder in hot,

humid locations such as inside a

closed automobile under direct

sunlight or on the beach in the

summer.

• Do not store the recorder in places

exposed to excessive moisture or

dust.

• Do not use organic solvents such

as alcohol and lacquer thinner to

clean the unit.

• Do not place the recorder on top of

or near electric appliances such as

TVs or refrigerators.

• Avoid recording or playing back

near cellular phones or other

wireless equipment, as they may

cause interference and noise.

If you experience noise, move

to another place, or move the

recorder further away from such

equipment.

• Avoid sand or dirt. These can cause

irreparable damage.

• Avoid strong vibrations or shocks.

• Do not disassemble, repair or

modify the unit yourself.

• Do not operate the unit while

operating a vehicle (such as a

bicycle, motorcycle, or go-cart).

• Keep the unit out of the reach of

children.

Precautions relating to reception:

• Radio reception will vary substantially

depending on where you are using the

radio. If the reception is poor, try moving

the recorder near to a window and away

from electrical products such as cellular

phones, televisions,  orescent lights etc.

Warning regarding data loss:

• Recorded content in memory may

be destroyed or erased by operating

mistakes, unit malfunction, or during

repair work. It is recommended to back

up and save important content to other

media such as a computer hard disk.

• Any liability for passive damages or

damage of any kind occurred due to data

loss incurred by a defect of the product,

repair performed by the third party other

than Olympus or an Olympus authorized

service station, or any other reasons is

excluded from the Olympus’s liability.

Precautions relating to recording:

• Olympus will not be held responsible for

any deletion or corruption of recorded

files caused by malfunction of the

recorder or your PC.

• Content you have recorded cannot, under

than private consumption without the

express consent of the copyright holder.

Safe and proper usage

Batterries

f Danger:

• Batteries should never be exposed

to flame, heated, short-circuited or

disassembled.

• Never store batteries where they

will be exposed to direct sunlight,

or subjected to high temperatures

in a hot vehicle, near a heat source,

etc.

f Warning:

• Do not solder lead wires or

terminals directly onto a battery or

modify it.

• Do not connect the = and -

terminals together. This may cause

fire, overheating or electric shock.

• When carrying or storing the

batteries, be sure to put it in

the provided case to protect its

terminals. Do not carry or store the

batteries with any metal objects

(such as key rings).

If this warning is not followed, fire,

overheating or electric shock may

occur.

• Do not connect the batteries

directly to a power outlet or a

cigarette lighter of an automobile.

• Do not insert the batteries with

their = and - terminals reversed.

• If any liquid from a battery gets

into your eyes, promptly wash it

off with clean water and consult

your doctor at once.

• Do not attempt to recharge

alkaline, lithium or any other non-

rechargeable batteries.

• Never use any batteries with a torn

or cracked outer cover.

• Keep batteries out of the reach of

children.

• If you notice anything unusual

when using this product such as

abnormal noise, heat, smoke, or a

burning odor:

1 remove the batteries immediately

while being careful not to burn

yourself, and;

2 call your dealer or local Olympus

representative for service.

• Do not expose the batteries to

water. Do not allow water to

contact the terminals.

• Do not remove or damage the

batteries insulating sheet.

• Do not use the batteries if you

find something wrong with them

such as leakage, color change or

deformity.

• Unplug the charger if the charging

is still incomplete after the

specified time it should take.

• Should any batteries liquid get on

skin or clothing, promptly wash it

off with clean water.

• Keep batteries away from fire.

f Caution:

• Do not subject batteries to strong

shocks.

• When using rechargeable batteries

that have not been used for a

while, be sure to recharge them

before use.

• Rechargeable batteries have limited

lifetime. When the operating

time becomes shorter even if the

rechargeable battery is fully charged

under the specified condition,

replace it with a new one.

Main features

s Built-in Stereo FM tuner. You can

use the recorder as a radio (For

WS-710M only) (☞ P. 41).

s Dual function recorder as a digital

voice recorder and a digital music

player (For WS-710M, WS-700M

only) (☞ P. 25, P. 31).

s Supports high capacity recording

media. Besides the built-in

memory, you can also record into

a microSD* card (☞ P.19).

* For WS-710M, WS-700M only.

s Supports the linear PCM format,

which is capable of recording

sound quality equivalent to

CD-level (For WS-710M, WS-700M

only) (☞ P.47, P. 49).

s Supports multiple recording

formats, such as MP3 format

(MPEG-1 Audio Layer 3) and

Windows Media Audio (WMA)

format (☞ P.47, P.49).

s You can playback WAV*, WMA,

and MP3 format files transferred

from a computer in addition to files

recorded by the device itself.

You can also enjoy using as a music

player.

* For WS-710M, WS-700M only.

s It has a built-in Variable Control

Voice Actuator (VCVA) function

(☞ P.47, P.5 0).

s The Low Cut Filter minimizes

air conditioner noise and other

similar noises while recording

(☞ P.47, P.5 0).

s A directional microphone feature

has been included that allows

switching between broad stereo

recording and recording with a

highly directional quality (For

WS-710M only) (☞ P. 47, P.50).

s Has recording scene setting and

playback scene setting functions to

to different usages (☞ P.27, P. 38 ,

P.47, P.52, P. 55).

s It features various repeat functions

(☞ P.37, P. 47, P. 54).

EUPHONY MOBILE has been included

to produce a natural, realistic

experience without degrading sound

quality (For WS-710M, WS-700M

only)

(☞ P.47, P.53).

s You can change the playback

equalizer settings (For WS-710M,

WS-700M only) (☞ P.47, P. 55).

s You can divide files that have

been recorded by the recorder in

MP3 or PCM* format (☞ P. 60).

* For WS-710M, WS-700M only.

s Index mark and temp mark

features allow you to quickly find

desired locations (☞ P. 35).

s The playback speed can be

controlled as preferred (☞ P.36).

s Connecting this recorder directly

to the USB port links up with your

PC. The data can be transferred or

saved without USB cable or driver

software (☞ P.69, P. 81).

This recorder is compatible with USB 2.0,

enabling fast data transfer to a computer.

s It has a USB charging function

(For WS-710M, WS-700M only)

(☞ P.12).

s It has a backlight full-dot display

(LCD panel) (☞ P. 8).

Getting started

(

)

Identification of parts

1 Built-in stereo microphone (L)

2 Built-in stereo microphone (R)

3 Recording indicator light

EAR

(Earphone) jack

MIC

(Microphone) jack

6 Display (LCD panel)

7 Built-in speaker

button

REC

(s) (Record) button

0 9 button

–

button

LIST

button

ERASE

button

SCENE

INDEX

button

^ 0 button

STOP

(4) button

* Battery cover

( Card cover

) Strap hole

POWER

HOLD

switch

= USB connector slide lever

q USB connector

Identification of parts

Display (LCD panel)

1 Recording media indicator*1,

[

Recorder

] mode indicator,

Battery indicator

2 Folder name

3 Recording media indicator*1,

[

Music

] mode indicator,

Battery indicator

4 Folder name

*1 For WS-710M, WS-700M only

Folder list display

File list display

When [

Recorder

] mode is selected:

When [

Music

] mode is selected:

For WS-710M:

For WS-600S:

When [

Recorder

] mode is selected:

For WS-710M/WS-700M:

When [

Recorder

] mode is selected:

For WS-710M/WS-700M:

For WS-700M:

Identification of parts

When [

Music

] mode is selected:

File display

1 Recording media indicator*1,

Folder name, Battery indicator

2 File name

3 Recording media indicator*1,

Folder name, Battery indicator

4 File name

*1 For WS-710M, WS-700M only

1 Recording media indicator*1,

File name, Battery indicator

2 Folder indicator,

Recording mode indicator

3 During recording mode:

Remaining memory bar indicator

During playback mode:

Playback position bar indicator

4 Record/ Playback status indicator

5 Recording date and time

6 [?] Microphone Sensitivity

indicator,

[û] VCVA indicator,

[Æ] Voice sync indicator,

[%] Noise Cancel indicator*1,

[$] Voice Filter indicator,

[0] Low Cut Filter indicator,

[≤] Zoom MIc indicator*2

For WS-600S:

When [

Recorder

] mode is selected:

When [

Music

] mode is selected:

For WS-710M/WS-700M:

For WS-600S:

Identification of parts/Power supply

Identification of parts

Power supply

Inserting batteries

This recorder can be used with either Ni-MH

Rechargeable Batteries or AAA Alkaline

Batteries.

7 [í] Erase lock indicator,

[Ø] Speaker muting indicator,

Current file number/ Total

number of recorded files in the

folder

8 During recording mode:

Elapsed recording time

During playback mode:

Elapsed playback time

9 During recording mode:

Remaining recording time

During playback or stop mode:

File length

0 Playback mode indicator

! Title name

@ Artist name

# Album name

$ Elapsed playback time

% [∞] EUPHONY indicator*1

[ù] Equalizer indicator*1

^ Current file number/ Total

number of recorded files in the

folder

[í] Erase lock indicator,

[Ø] Speaker muting indicator

& File length

* Playback mode indicator

*1 For WS-710M, WS-700M only

*2 For WS-710M only

• When charging the recorder, be sure

to use the supplied speci ed Ni-MH

rechargeable (BR401) batteries.

• The supplied rechargeable batteries

are not fully charged. Before using

the unit or after long periods of

disuse, it is recommended that you

continuously charge them until full

(☞ P.12).

For WS-710M/WS-700M:

• This recorder cannot charge

rechargeable batteries.

For WS-600S:

1 Lightly press down on the arrow

and slide the battery cover open.

Power supply

2 Insert size-AAA battery,

observing the correct = and

- polarities.

3 Close the battery cover

completely by pressing to the

direction A, then sliding to the

direction B.

Notes

• Manganese batteries may not be used in

this recorder.

• When changing batteries, AAA alkaline

batteries or Olympus Ni-MH rechargeable

batteries are recommended.

• Be sure to stop the recorder before

replacing the batteries. Unloading the

batteries while the recorder is in use may

cause a malfunction such as corrupting

the  le, etc. If you are recording into a  le

and the batteries run out, you will loose

your currently recorded  le because the

 le header will not be able to close. It is

crucial to change the batteries once you

see only one Hash mark in the battery

indicator.

• If it takes longer than 1 minute to replace

the dead batteries or if you take the

batteries in and out repeatedly at short

intervals, you may have to redo the

battery and time settings. In this case,

the [Battery] screen will appear. For

more details, refer to “Battery settings”

(☞ P.12).

• Remove the batteries if you are not going

to use the recorder for an extended

period of time.

• When replacing rechargeable batteries,

be sure to use Ni-MH rechargeable

batteries (optional). The use of other

manufacturers' products can damage the

recorder and should be avoided.

Power supply

Charging by connecting to a

computer via USB

You can charge the batteries by connecting

to a PC's USB port. When charging, be sure

to correctly place the rechargeable batteries

(supplied) into the recorder (☞ P.10 ).

1 Boot the PC.

2 Slide the USB connector slide

lever in the direction indicated

by the arrow to eject the USB

connector out of the recorder.

Do not charge primary batteries such

as alkaline or lithium batteries.It may

cause battery leakage heating and

recorder malfunction.

For WS-710M/WS-700M:

Battery indicator

• When [æ] appears on the display,

replace the batteries as soon as

possible. When the batteries are

too weak, [s] and [Battery Low]

appears on the display and the

recorder shuts down.

Battery settings

Select to match the battery you are using.

1 Replace the battery and switch

on the recorder.

2 Press the + or − button to change

the setting.

[Ni-MH] (õ):

Select when using the Olympus

Ni-MH rechargeable battery (BR401).

[Alkaline] (ú):

Select when using a commercially

available alkaline battery.

3 Press the

button to

complete the setting.

• If the “Hour” indicator flashes in the

display, see “Setting time and date

[Time & Date]” (☞ P.17 ).

The battery indicator on the display

changes as the batteries loose power.

Note

• When playing a voice/music  le, the

recorder may be reset due to the

reduction of the voltage output of the

batteries depending on the volume level

even if [º] is displayed in the battery

indicator. In this case, lower the volume of

the recorder.

Battery type

Power supply

3 Make sure that the recorder is

stopped, and connect to the PC's

USB port.

4 Press the

button to

start charging.

Connect to the USB connecting AC

adapter (optional) to charge

It can be charged by connecting to the

USBconnecting AC adapter (A514) (optional).

1 Connect the recorder to the AC

adapter’s USB port.

For WS-710M/WS-700M:

5 Charging is completed when

battery indication becomes to [¿].

Charging time: approximately 3 hours *

* It shows the approximate time when

charging the rechargeable battery

fully from no remaining power at the

room temperature. The charging time

will be changed depending on the

remaining amount and the state of

batteries.

2 Connect the AC adapter to a

household power outlet.

To the

Household

power outlet

To the

USBconnecting

AC adapter’s

(A514) USB

connecter

Power supply

• Do not use USB extension cables other

than the supplied cable.

Using cables from other manufacturers

could result in damage to the recorder. Do

not use the supplied USB extension cable

with devices from other manufacturers.

Cautions concerning the rechargeable batteries

Read the following descriptions carefully

when you use the Ni-MH rechargeable

batteries.

Discharging:

The rechargeable batteries self-discharge

while this is not in use. Be sure to charge

them regularly before use.

Operating temperature:

The rechargeable batteries are chemical

products. The rechargeable batteries

efficiency may fluctuate even when

operating within the recommended

temperature range. This is an inherent

nature of such products.

Recommended temperature range:

When operating appliance:

0°C - 42°C/ 32°F - 107.6°F

Charging:

5°C - 35°C/ 41°F - 95°F

Storage for a long period:

–20°C - 30°C/ –4°F - 86°F

Using the rechargeable batteries outside

the above temperature range may result in

declining efficiency and shorter battery life.

In order to prevent battery leakage or rust,

remove the rechargeable batteries from the

products when you will not be using them

for a long time, and store them separately.

• If [USB Connect] has not been set

to [AC Adapter], [Please wait] will

continue to be displayed (☞ P. 61) .

4 Charging is completed when

battery indication becomes to [¿].

Notes

• The recorder cannot be charged when

the PC is not turned on. Also, it may not

be charged when the PC is not switched

on, or when it is in the standby, hibernate

or sleep mode.

• Do not charge the recorder with the USB

hub connected.

• Insert the supplied rechargeable battery

and set [Battery] to [Ni-MH]. If [Battery]

is set to [Alkaline], you cannot recharge

(☞ P. 12).

• You cannot charge when [ø]*1 or [√]*2

blinks. Charge the batteries at the

temperature from 5°C to 35°C (41°F to

95°F).

*1 [ø]: When surrounding temperature is

low.

*2 [√]: When surrounding temperature is

high.

• When using time becomes notably short

even after the batteries are fully charged,

replace them with new ones.

• Be sure to push the USB connector all the

way in. Otherwise, the recorder may not

operate properly.

• Use the supplied USB extension cable

depending on situations.

3 Press the

button to

start charging.

Power supply

Turning on/off the power

When the recorder is not being used,

turn the power off to reduce battery

consumption to a minimum. Even if

the power is turned off, existing data,

mode settings, and clock settings will be

maintained.

Turning on the power

While the recorder’s power is off,

slide the

POWER

HOLD

switch in the

direction indicated by the arrow.

• The display will turn on, and the power

will be turned on.

• The resume function will bring the

recorder back to the stop position in

memory before power was turned off.

Notes

• This recorder is designed to fully charge

batteries regardless of their energy level.

However, for best results when charging

newly purchased rechargeable batteries

or batteries that have not been used for

a long time (more than one month), It is

recommended to fully charge the batteries

then discharge repeatedly for 2 to 3 times.

• When disposing rechargeable batteries,

always observe the local laws and

regulations. Contact you local recycling

center for proper disposal methods.

• If Ni-MH rechargeable batteries are not

fully discharged, protect against short-

circuiting (e.g. by taping the contacts)

before disposing.

For customers in Germany:

Olympus has a contract with the GRS (Joint

Battery Disposal Association) in Germany to

ensure environmentally friendly disposal.

Power save mode

If the recorder is on and stops for 10

minutes or longer (default), the display

shuts off and it goes into power save

mode (☞ P.57 ).

• To exit power save mode, press any

button.

Turning off the power

Slide the

POWER

HOLD

switch in the

direction indicated by the arrow for

0.5 seconds or longer.

• The display shuts off, and the power will

be turned off.

• The resume function remembers the

stop position before the power is turned

off.

HOLD

If you bring the recorder is set to HOLD mode, the running conditions will be preserved, and

all buttons will be disabled. This feature is useful when the recorder has to be carried in a bag

or pocket. Also, you can stop to prevent accident during recording.

Set the recorder to HOLD mode

Slide the

POWER

HOLD

switch to the

[

HOLD

] position.

• After [Hold] appears on the display, the

recorder is set to HOLD mode.

Notes

• If you press any button in HOLD mode, the clock display  ashes for 2 seconds, but it will

not operate the recorder.

• If HOLD is applied during playback (recording), operation is disabled with the playback

(recording) state unchanged (When playback has ended and the recording has ended due

to the remaining memory being used up, it will stop).

HOLD

Exit HOLD mode

Slide the

POWER

HOLD

switch to the

A position.

+−

button

9 0 button

button

LIST

button

Setting time and date

If you set the time and date beforehand,

the information when the file is recorded is

automatically stored for each file. Setting

the time and date beforehand enables easier

file management.

When you use the recorder for the

first time after purchasing it, or when

the batteries have been inserted

without the device having been used

in a long time, the [

Set Time & Date

]

will appear. When the “

Hour

” is

flashing, conduct the setup from

Step 1.

1 Press the 9 or 0 button to

select the item to set.

• Select the item from the “Hour”,

“Minute”, “ Year”, “Month” and “Day”

with a flashing point.

2 Press the

−

button to set.

• Follow the same steps by pressing the

9 or 0 button to select the next

item, and press the

−

button to

set.

• You can select between 12 and 24

hour display by pressing the LIST

button while setting the hour and

minute.

Example: 10:38 P.M

10:38 PM

(Initial setting) 22:38

• You can select the order of the

“Month”, “Day” and “Year” by

pressing the LIST button while

setting them.

Example: July 15, 2010

7M 15D 2010Y

(Initial setting)

15D 7M 2010Y

2010Y 7M 15D

Setting time and date [Time & Date]

• The clock will start from the set date

and time. Press the OK `/MENU

button according to the time signal.

Note

• If you press the OK `/MENU button

during the setup operation, the recorder

will save the items that were set to that

point.

3 Press the

button to

complete the setting.

Setting time and date

Setting time and date [Time & Date]

+−

button

9 0 button

button

STOP

(4) button

Changing the time and date

5 Press the

or 9

button.

• [Time & Date] will appear on the

display.

• The “Hour” will flash on the display,

indicating the start of the Time and

Date setup process.

3 Press the

or 9

button to move the cursor to the

item to set.

• [Device Menu] will appear on the

display.

4 Press the

−

button to select

[

Time & Date

1 While the recorder is during

stop mode, press and hold the

button.

• The menu will appear on the display

(☞ P.47 ).

2 Press the

−

button to select

[

Device Menu

] tab.

• You can change the menu display by

moving the settings tab cursor.

While the recorder is during stop

mode, press and hold the STOP (4)

button to display the [Time & Date]

and [Remain]. If the current time and

date is not correct, set it using the

procedure below.

The following steps are the same as

Step 1 through Step 3 of “Setting time

and date [Time & Date]” (☞ P.17 ).

6 Press the

STOP

(4) button to close

the menu screen.

Inserting and ejecting a microSD card

The “microSD” indicated in the instruction

manual refers to both microSD and

microSDHC. This recorder can be used with

commercially available microSD cards as

well as the built-in memory.

Inserting a microSD card

1 While the recorder is during stop

mode, open the card cover.

3 Close the card cover securely.

2 Face the microSD card the correct

way and insert it into the card

slot as shown in the diagram.

• Insert the microSD card keeping it

straight.

• Inserting the microSD card the wrong

way or at an angle could damage the

contact area or cause the microSD

card to jam.

• If the microSD card is not inserted all

the way, data may not be written to

the microSD card.

• When you insert the microSD card,

the recording media changeover

display will appear.

4 When you are recording to a

microSD card, press the

−

button and select [

Yes

5 Press the

button to

complete the setting.

Inserting and ejecting a microSD card

For WS-710M/WS-700M:

Inserting and ejecting a microSD card

Notes

• It is possible to switch the recording

media over to the built-in memory

(☞ P.47, P.57 ).

• In some cases microSD card which have

been formatted (initialized) by another

device, such as a computer, cannot be

recognized. Be sure to format them with

this recorder before using (☞ P.63).

Ejecting a microSD card

1 While the recorder is during stop

mode, open the card cover.

2 Push the microSD card inward to

unlock it, and let it eject partially.

• The microSD card is visibly out of the

slot and can be removed safely.

• If you eject the microSD card when

the memory is selected to [microSD

Card], it will automatically changed

to [Built-in Memory Selected].

3 Close the card cover securely.

Notes

• Releasing your  nger quickly after

pushing the microSD card inward may

cause it to eject forcefully out of the slot.

• Before inserting the microSD card, turn

o the write protection function. Check

the Olympus website regarding microSD

cards which are con rmed operation with

this recorder.

• This recorder may not recognize correctly

on some microSD cards which are not

compatible with this recorder.

• In the case when the microSD card cannot

be recognized, remove the microSD card

then put it in again to see if this recorder

recognizes the microSD card.

• The processing performance reduces in

a microSD card when you repeat writing

and delete. In this case, format the

microSD card (☞ P.63).

[Home] display operations

+−

button

LIST

button

[Home] display operations

For WS-710M/WS-700M:

1 Press the

LIST

button repeatedly

to set the [

Home

] display.

• [Home] will appear on the display.

When [

Recorder

] is selected:

The recorder will go into [Recorder]

mode. You will be able to record

and playback files recorded by the

recorder (☞ P.2 5, P.31) .

As well as an voice recorder and a music player,

you can also use the recorder as a radio*.

* For WS-710M only.

2 Press the + or

—

button to select

the mode.

When [

FM Radio

]* is selected:

The recorder will go into [FM Radio]

mode, and you will be able to receive

FM radio(☞ P. 41, P. 42).

When [

Music

] is selected:

The recorder will go into [Music] mode,

and you will able to playback music files

transferred to the recorder (☞ P. 31).

3 Press the

button.

Note

• During recording, you cannot switch the

mode without stopping the recorder.

* For WS-710M only

Home

Folder A

Folder B

Folder C

Folder D

001

002

003

004

200

Folder File

Recorder

Radio

Folder

Folder E

Notes on the folders

The built-in memory or the microSD card can be used for the recording media (For WS-710M,

WS-700M only). The voice files and the music files are separated into folders for voice

recordings and folders for music playback that are organized in a branching tree-style and

saved.

About the folders for voice recordings

[Folder A] - [Folder E] within the [Recorder] folder are the folders for voice recordings. When

recording with this recorder, select any one of the five folders and then record.

When you record from the radio, the

recording will be stored automatically in the

[Radio Folder] folder (For WS-710M only).

Becomes destination for

microphone recording.

Note

• Files or folders located under the folder [Recorder] will not be indicated on the recorder.

You can change the mode

on the [Home] display

(For WS-710M, WS-700M

only).

Each folder can store up to

200 files.

Notes on the folders

Artist 01

Artist 02

Artist 03

001

002

003

004

200

Folder File

Album 01

Album 02

Album 03

Home

Music

About the folder for music playback

Each folder can store

up to 200 files.

Up to 300 folders can be created under the [Music]

folder, including [Music].

For WS-710M/WS-700M:

When transferring music files to the device using Windows Media Player, a folder is automatically

created within the music playback folder which has a layered structure as shown in the diagram

below. Music files that are in the same folder can be rearranged in preferential order and replayed

(☞ P. 59).

First layer Second layer

Selecting the folders and files

Change folders while the operation is stopped or played back. For information on the layered

structure of the folders, see the section entitled “Notes on the folders” (☞ P. 22, P.2 3).

Moving through the levels

}

Return

LIST

button

Each time you press this it returns up one

level. The list display can be operated by

the 0 button.

• When you press and hold the LIST

button while moving in a hierarchy of

folders, it will return to the  le display.

{

Proceed

button

Each time you press this it opens the

folder or file selected in the list display

and proceeds down one level.

• The list display screen can be

operated by the 9 button.

+ or – button

Select the folder or file.

[

Home

] display*:

Allows the mode of the recorder to be

changed (☞ P. 21).

File display:

Information of the selected file is

displayed. Enters in playback standby

mode.

List display:

The folders and files recorded in this

recorder are displayed.

* For WS-710M, WS-700M only

Selecting the folders and files

Operation of the folders for voice recordings

Operation of the folders for music playbacks*

[

Home

] display*

Folder list

display

File list display File display

Folder list

display

Folder list

display

(First layer)

Folder list

display

(Second layer)

File list display File display

Example:

WS-710M

Recording

REC

(s) button

STOP

(4)button

About recording

Notes

• To ensure that you do not lose the

beginning of the recording, only record

after con rming that the recording

indicator light is lit and checking the

mode indicator on the display.

• When remaining recording time is less

than 60 seconds, the recording indicator

light starts  ashing. When the recording

time is decreasing to 30 or 10 seconds,

the light  ashes faster.

• [Folder Full] will appear when the

recording cannot be made any further.

Select on other folder or delete any

unnecessary  les before recording

(☞ P. 39) .

• [Memory Full] will appear when the

memory is full. Delete any unnecessary

 les before recording any further

(☞ P. 39) .

1 Select the recording folder

(☞ P. 22 to P. 24).

2 Press the

REC

(s) button to start

recording.

• The recording indicator light glows

and [´] will appear on the display.

• Turn the microphone in the direction

of the source to be recorded.

a Recording mode

b Remaining memory bar indicator

c Elapsed recording time

d Remaining recording time

e Level meter (change according to

the recording level and recording

function settings)

• [Rec Mode] cannot be changed in

the recording standby mode or while

recording. Configure this while the

recorder is stopped (☞ P.47, P. 49) .

3 Press the

STOP

(4) button to stop

recording.

• [¶] will appear on the display.

• In modes other than [Recorder] mode,

[Cannot record in this folder] will

appear if you press the REC (s) button.

Only record after you have set the mode

to [Recorder] mode on the [Home]

display (☞ P.21).

• With the WS-710M, you can record FM

radio in [FM Radio] mode (☞ P.46).

For WS-710M/WS-700M:

f File length

Before starting recording, select a folder

between [&] to [*]. These five folders can

be selectively used to distinguish the kind

of recording; for example, Folder [&] might

be used to store private information, while

Folder ['] might be dedicated to holding

business information.

Recording

• [•] will appear on the display.

• When operating in [Recorder] mode, the

last file recorded using the microphone

will be play back.

• When operating in [FM Radio] mode,

the recorder will automatically enter

[Recorder] mode, and the last file

recorded from the FM radio will play

back.

Pause

While the recorder is during

recording mode, press the

REC

(s)

button.

• [≠] will appear on the display.

• The recorder will time out after 60

minutes when left in [Rec Pause].

Resume Recording:

Press the

REC

(s) button again.

• Recording will resume at the point of

interruption.

To quickly check on the recorded contents

While the recorder is during recording

mode, press the

button.

Settings relating to Recording

[Mic Sense]

(☞ P.47, P. 4 9) Sets the recording sensitivity.

[Rec Mode] *1

(☞ P.47, P. 4 9)

Sets the recording rate for

each recording format.

[Zoom Mic] *2

(☞ P.47, P. 50)

Sets the directivity of the

builtin stereo microphone

[Low Cut Filter]

(☞ P.47, P. 50)

This function can reduce

noise from air conditioners,

projectors and other similar

noises.

[VCVA]

(☞ P.47, P. 50)

Sets the threshold level for

the Variable Control Voice

Actuator (VCVA).

[V-Sync. Rec]

(☞ P.47, P. 51)

Sets the start level for voice

sync recording.

[Rec Scene]

(☞ P.47, P. 52)

Sets the recording settings

which matches the recording

condition or environment.

*1 For WS-710M (In [FM Radio] mode, the

only setting of the [Rec Mode] settings

you can change is the recording  le

format).

*2 For WS-710M only.

For WS-710M, WS-700M only:

• We recommend formatting the record

media in the recorder before recording

(☞ P.63).

• When a microSD card is inserted in the

recorder, be sure to con rm the recording

media as either [Built-in Memory]

or [microSD Card] so that there is no

mistake (☞ P.47, P. 57).

• If the REC (s) button is pressed when a

function other than the record function

is speci ed, [Cannot record in this

folder] is displayed. Select a folder from

[Folder A] through [Folder E] and start

recording again.

Recording

To EAR jack

Recording

+−

button

SCENE

INDEX

button

Listening while audio is recorded

If you start recording after inserting the

earphone into the EAR jack on the recorder,

you can hear the sound being recorded. The

recording monitor volume can be adjusted

by pressing the + or − button.

Connect the earphone to the

EAR

jack on the recorder.

• After recording has started, you can hear

the sound being recorded through the

earphone.

Notes

• Recording level cannot be controlled

using the volume button.

• When using the earphones, do NOT set

the volume too high. Listening at very

high volume may lead to hearing loss.

• Do not place earphones near a

microphone as this may cause feedback.

• When the external speaker is connected

while recording, there is a risk that audio

feedback will occur.

Changing the recording scene

[Rec Scene]

You can easily change the recording settings

by selecting the scene which best matches

your usage (☞ P. 47, P.52).

1 While the recorder is during

stop mode, press and hold the

SCENE

INDEX

button.

2 Press the

−

button to select

[

Rec Scene

3 Press the

button.

4 Press the

−

button to select

the recording scene.

5 Press the

button.

Recording

Recommended settings by recording condition

The recorder is initially set to [ST XQ] (WMA format) mode so that you can make high quality

stereo recordings immediately after purchasing it. The various functions relating to recording

can be configured in detail to suit the recording conditions. The following table shows the

recommended settings for some example recording conditions.

Recording

condition

Recommended settings

[Rec Mode]

(☞ P.47, P. 4 9)

[Mic Sense]

(☞ P.47, P. 4 9)

[Low Cut Filter]

(☞ P.47, P. 50)

[Zoom Mic]*1

(☞ P.47, P. 50)

Lectures in large

rooms.

[PCM]: [44.1kHz/16bit]*2

[MP3]: [128kbps] or more

[WMA]: [ST XQ] [Hight]

[On]

[+6]

Conferences with

large crowds.

[MP3]: [128kbps] or more

[WMA]: [ST XQ]

[Off]

Meetings

and business

negotiations with

a small number of

people.

[MP3]: [128kbps]

[WMA]: [ST XQ] [Middle]

Dictation with a

lot of background

noise.

[WMA]: [HQ] [Low]

Music playing,

wild birds singing,

and railway

sounds.

[PCM]: [44.1kHz/16bit]*2

Set the microphone

sensitivity

according to the

volume being

recorded.

[Off]

*1 For WS-710M only. *2 For WS-710M, WS-700M only. *3 For WS-600S only.

WS71 0001 .WMA

123

File names will be automatically created for files recorded by this recorder.

1 User ID:

The user ID name that has been set on

the Digital Voice Recorder.

2 File number:

A  le number is consecutively

assigned regardless of the changes in

the recording media.

3 Extension:

These are the  le name extensions for

the recording format when recording

with this device.

• Linear PCM format* .WAV

• MP3 format .MP3

• WMA format .WMA

* For WS-710M, WS-700M only.

Recording

To MIC jack

Recording from external

microphone or other devices

The external microphone and other devices

can be connected and the sound can be

recorded. Connect as follows by the device

to be used.

• Do not plug and unplug devices into the

recorder’s jack while it is recording.

Recording with external

microphone:

Connect an external microphone to

the

MIC

jack of the recorder.

Applicable external microphones

(optional) (☞ P. 86)

Stereo microphone: ME51S

The built-in large-diameter microphone

enables sensitive stereo recording.

2 channel microphone (omni-

directional): ME30W

These are highly sensitive omni-

directional microphones supported by

plug-in power which are well-suited to

recording musical performances.

Compact Gun Microphone

(unidirectional): ME31

The directional microphones useful for

recordings such as outdoor recording

of wild birds singing.

Compact zoom microphone

(unidirectional): ME32

The microphone is integrated with a

tripod, making it suitable to place on a

table and record conferences or lecture

from a distance.

Highly sensitive noise-cancellation

monaural microphone (unidirectional):

ME52W

This microphone is used to record

sound at a distance while minimizing

surrounding noise.

Tie clip microphone (omni-directional):

ME15

Small concealing microphone with a

tie-clip.

Telephone pickup: TP7

Earphone type microphone can be

plugged into your ear while phoning.

The voice or conversation over the

phone can be clearly recorded.

Notes

• The built-in microphone will become

inoperable when an external microphone

is plugged into the recorder’s MIC jack.

• Microphones supported by plug-in

power can also be used.

• When the external stereo microphone

is used while [Rec Mode] is set to a

monaural recording mode, audio will

be recorded to the L channel only

(☞ P.47, P.49).

• When an external monaural microphone

is used while [Rec Mode] is set to a stereo

recording mode, it enables recording

only with the L channel microphone

(☞ P.47, P.49).

Recording

To MIC

jack

To audio output

terminal of other

devices

To EAR

jack

To audio input

terminal of

other devices

Note

• The detailed input levels cannot be

adjusted with this recorder. When

external devices are connected, perform

a test recording and then adjust the

output level for the external devices.

Recording the sound of other

devices with this recorder:

The sound can be recorded when

connecting to the audio output terminal

(earphone jack) of the other device, and the

MIC jack of the recorder with the connecting

cord KA333 (optional) for dubbing.

Note

• When you adjust the various sound

quality settings related to playback on

the recorder, the audio output signal sent

out from the EAR jack will change as well

(☞ P.47, P.53 , P. 54 , P. 55).

Recording the sound of this

recorder with other devices:

The sound of this recorder can be recorded

to other devices when connected to the

audio input terminal (microphone jack)

of other devices and the EAR jack of this

recorder, with the connecting cord KA333

(optional) for dubbing.

+−

button

Playback

STOP

(4) button

Playback

a Recording media indicator*, File

name

b Folder indicator

c Playback position bar indicator

d Elapsed playback time

e File length

* For WS-710M, WS-700M only.

3 Press the

−

button to adjust

to a comfortable listening

volume.

About playback

1 Select the folder which

contains the files to be played

back (☞ P.22 to P. 24).

2 Press the

button to

start playback.

• [•] will appear on the display.

• When you want to playback a  le

transferred from your PC, set the

recorder in [Recorder] or [Music]

mode based on where you have

transferred the  le.

• If you want to playback the  le

you recorded, set the recorder to

[Recorder] mode (☞ P. 21).

For WS-710M/WS-700M:

• The volume can be adjusted within a

range from [00] to [30].

4 Press the

STOP

(4) button at

any point you want to stop the

playback.

• [¶] will appear on the display.

• This will stop the file being played

back midway. When the resume

function is activated the stopped

location will be registered, even if the

power is turned off. The next time the

power is turned on, playback may be

resumed from the registered stopped

location.

The recorder can playback WAV*, MP3

and WMA format files. To playback a file

recorded with other machines, you need to

transfer (copy) it from a computer.

* For WS-710M, WS-700M only.

Playback

To EAR

jack

Playback

Settings relating to playback

[Noise Cancel]*1

(☞ P.47, P. 53)

If recorded audio is difficult

to understand because of

noisy surroundings, adjust

the Noise Cancel setting

level.

[EUPHONY]*2

(☞ P.47, P. 53)

The EUPHONY setting can

be set to one of 4 levels

according to your preference.

[Play Mode]

(☞ P.47, P. 54)

You can select the playback

mode that fits your

preference.

[Voice Filter]*1

(☞ P.47, P. 54)

The recorder has a Voice

Filter Function to cut low

and high frequency tones

during normal, fast, or slow

playback, and enable clear

audio playback.

[Equalizer]*2

(☞ P.47, P. 55)

If you change the equalizer

setting, you can enjoy the

music with your favorite

sound quality.

[Skip Space]

(☞ P.47, P. 55)

The skip interval length can

be set.

[Play Scene]

(☞ P.47, P. 55)

Playback settings of your

choice can be saved to suit

different sound qualities and

playback methods.

*1 Can be operated only in [Recorder] mode.

*2 Can be operated only in [Music] mode.

For WS-710M/WS-700M:

[Play Mode]

(☞ P.47, P. 54)

You can select the playback

mode that fits your

preference.

[Voice Filter]

(☞ P.47, P. 54)

The recorder has a Voice

Filter Function to cut low

and high frequency tones

during normal, fast, or slow

playback, and enable clear

audio playback.

[Skip Space]

(☞ P.47, P. 55)

The skip interval length can

be set.

[Play Scene]

(☞ P.47, P. 55)

Playback settings of your

choice can be saved to suit

different sound qualities and

playback methods.

For WS-600S:

Playback through earphone

An earphone can be connected to the EAR

jack of the recorder for listening.

• When the earphone is used, the recorder

speaker will be switched-off.

Notes

•

To avoid irritation to the ear, insert the

earphone after turning down the volume level.

• When you listen with the earphone during

playback, do not raise the volume too

much. It may cause hearing impairment and

decrease in hearing ability.

Playback

• [ß] will appear on the display.

• If you release the 9 button, it will stop.

Press the OK `/MENU button to start

playback from where it was stopped.

While the recorder is during

playback mode, press and hold the

9 button.

• When you release the 9 button the

recorder will resume normal playback.

• If there is an index mark or temp mark in

the middle of the file, the recorder will

stop at that location (☞ P. 3 5).

• The recorder stops when it reaches the

end of the file. Continue pressing the

9 button to proceed with the cue

from the beginning of the next file.

Forwarding

While the recorder is during stop

mode in the file display, press and

hold the 9 button.

Rewinding

While the recorder is during stop

mode in the file display, press and

hold the 0 button.

• [™] will appear on the display.

• If you release the 0 button, it will stop.

Press the OK `/MENU button to start

playback from where it was stopped.

While the recorder is during

playback mode, press and hold the

0 button.

• When you release the 0 button the

recorder will resume normal playback.

• If there is an index mark or temp mark in

the middle of the file, the recorder will

stop at that location (☞ P. 35).

• The recorder stops when it reaches the

beginning of the file. Continue pressing

the 0 button to proceed with the

review from the end of the previous file.

Playback

About music file

In cases where the recorder is unable

to playback music files that have been

transferred to it, check to make sure that the

sampling rate and bit rate are in the range

where playback is possible. Combinations of

sampling rates and bit rates for music files

which the recorder can playback are given

below.

File

format

Sampling

frequency Bit rate

WAV*

format 44.1 kHz 16 bit

MP3

format

MPEG1 Layer3:

32 kHz, 44.1 kHz,

48 kHz

MPEG2 Layer3:

16 kHz, 22.05 kHz,

24 kHz

From 8 kbps up to

320 kbps

WMA

format

8 kHz, 11 kHz,

16 kHz, 22 kHz,

32 kHz, 44.1 kHz,

48 kHz

From 5 kbps up to

320 kbps

* For WS-710M, WS-700M only.

• Variable bitrate MP3  les (in which

conversion bitrates can vary) may not

playback properly.

• For WAV  les, this recorder can only

playback those in the linear PCM format.

WAV  les other than these cannot be

played back.

• This recorder is compatible with

Microsoft Corporation DRM9, but not

with DRM10.

• Even if the  le is a compatible format to

playback on the recorder, the recorder

does not support every encoder.

Locating the beginning of the file

While the recorder is during stop

mode or playback mode, press the

9 button.

• The recorder skips to the beginning of

the next file.

While the recorder is during

playback mode, press the 0

button.

• The recorder skips to the beginning of

the current file.

While the recorder is during stop

mode, press the 0 button.

• The recorder skips to the beginning of

the previous file. If the recorder stop

the midway of the file, return to the

beginning of the file.

While the recorder is during

playback mode, press the 0

button twice.

• The recorder skips to the beginning of

the previous file.

Notes

• When you skip to the beginning of the

file during playback, the recorder will

stop at the position of the index mark

and temp mark. The index mark and temp

mark will be skipped when you perform

the operation in stop mode (☞ P. 35).

• When [Skip Space] set to other than

[File Skip], the recorder will skip forward/

reverse the specified time, then will start

playback (☞ P.47, P. 55).

Playback

+−

button

SCENE

INDEX

button

1 While the recorder is during

recording mode or playback

mode, press the

SCENE

INDEX

button.

• A number appears on the display and

an index mark or temp mark will be

placed.

Setting an index mark or a temp

mark

If index marks and temp marks are placed,

you can quickly find a location you want to

listen to in fast forward and fast rewind and

when cuing a file. Index marks can only be

placed on files created by Olympus voice

recorders, but temp marks can be placed

instead to temporarily remember desired

locations.

Clearing an index mark or a temp mark

1 Locate the index or temp mark

you want to clear.

2 Press the 9 or 0 button to

select the index or temp mark to

erase.

3 While the index or temp number

appears for approximately 2

seconds on the display, press the

ERASE

button.

• The index or temp mark is erased.

• Index or temp numbers after the

erased index or temp number will

automatically move up.

Notes

• Temp marks are temporary markings, so

if you transmit a  le to the PC, or move

it with a PC, they will be automatically

erased.

• Up to 16 index and temp marks can be

set in a  le. If you try to place more than

16 index or temp marks, [Index Full]

message will appear for index marks, and

[Temp Mark Full] for temp marks.

• Index or temp marks cannot be set or

erased in a locked  le (☞ P.47, P. 49).

• Even after an index or temp mark is

placed, recording or playback will

continue so you can place index or

temp marks in other locations in a

similar manner.

Playback

+−

button

Changing the playback speed

Change the speed according to need such as

listening to meeting content at a fast speed

or reviewing spots that you couldn't catch

in a language lesson at a slow speed. The

tone will be automatically adjusted digitally

without changing the voice so it sounds

natural.

1 While the recorder is during

playback mode, press the

button.

When the sampling frequency of the

playback file is 48 kHz or 32 kHz, you

cannot play back at 3-times speed. For

these frequencies, the maximum fast

playback speed is 2-times*.

* On the WS-600S, the maximum fast

playback is 2-times.

Notes

• As in normal playback mode, you can

stop playback, cue a file, or insert an

index mark in slow playback and fast

playback modes as well (☞ P. 35).

• The slow playback or fast playback is

available even if either [Voice Filter] or

[Equalizer] is set (☞ P. 47, P. 54, P.55).

For WS-710M, WS-700M only:

• The slow playback or fast playback is

not available if either [Noise Cancel] or

[EUPHONY] e ect is set (☞ P.47, P. 53) .

2 Press the

−

button to select

playback speed.

About the limits of fast playback

3 Press the

button.

a Playback speed indicator

• Even if playback is stopped, the changed

playback speed will be retained. The next

playback will be at that speed.

Playback

REC

(s) button

1 Select a file that has a segment

you would like to playback

repeatedly, and start playback.

2 Press the

REC

(s) button at the

point you want to start segment

repeat playback.

• [w] will flash on the display.

How to begin segment repeat

playback

This function enables repeated playback of

part of the file being played.

• You can fast forward, rewind, or

change playbackspeed as you can

operate in normal mode, when [w]

is flashing to find the end position

(☞ P. 33 , P. 36).

• When it reaches to the end of the file

while [w] is flashing, the point will

become the end position, and repeat

playback will start.

3 Press the

REC

(s) button again at

the position where you want to

end segment repeat playback.

• The recorder repeatedly plays back

the segment until the segment repeat

playback is cancelled.

Note

• As in normal playback mode, playback

speed can be changed during segment

repeat playback as well (☞ P.36). If an

index mark and temp mark are inserted

or eliminated during segment repeat

playback, segment repeat playback will

be canceled and it will return to normal

playback mode (☞ P. 35).

Playback

+−

button

SCENE

INDEX

button

Cancel the segment repeat playback function

Pressing any of the following

buttons will release the segment

repeat playback.

a Press the

STOP

(4) button

Pressing the STOP (4) button will

release segment repeat playback, and

stop playback.

b Press the

REC

(s) button

Pressing the REC (s) button will release

segment repeat playback, and playback

continues without repeating.

c Press the 9 button

Pressing the 9 button will release

segment repeat playback, and fast

forward and cue to the beginning of the

next file.

d Press the 0 button

Pressing the 0 button will release

segment repeat playback, and reverse to

the beginning of the current file.

Changing the playback scene

[Play Scene]

When you register playback settings for

preferred playback scenes, you can easily

change between playback functions (☞ P.47,

P. 55 ).

1 While the recorder is during stop

mode or playback mode, press

and hold the

SCENE

INDEX

button.

2 Press the

−

button to select

[

Play Scene

3 Press the

button.

4 Press the

−

button to select

the playback scene.

• For WS-600S, you can select from

[Voice 1] to [Voice 5].

5 Press the

button.

Example:

WS-710M, WS-700M

Erasing

+−

button

ERASE

button

+−

button

ERASE

button

Erasing

Erasing files

A selected file can be erased from a folder.

Also, all files in a folder can be erased

simultaneously.

1 Select the file you want to erase

(☞ P. 22 to P. 24).

2 While the recorder is during stop

mode in the file display, press the

ERASE

button.

3 Press the

−

button to select

[

Erase in Folder

] or [

File Erase

6 Press the

button.

• The display changes to [Erase!] and

erasing will start.

• [Erase Done] is displayed when the

file is erased. File numbers will be

reassigned automatically.

Erasing a folder

1 Select the folder you want to

erase (☞ P. 22 to P. 24).

2 While the recorder is during stop

mode in the folder list display,

press the

ERASE

button.

4 Press the

button.

5 Press the

button to select

[

Start

For WS-710M/WS-700M:

You can erase files by deleting folders.

Erasing

Notes

• You cannot recover a  le once it has been

erased. Please check carefully before

erasing.

• The locked  les and  les set as read-only

cannot be erased (☞ P. 47, P. 49).

• If an action is not selected within 8

seconds, the recorder will return to stop

status.

• If there is a  le that cannot be recognized

by the recorder, the  le and the folder

which contains that  le will not be erased.

Please connect the record to your PC to

erase.

4 Press the

button.

• The display changes to [Erase!] and

erasing will start.

• [Erase Done] is displayed when the

file is erased. File numbers will be

reassigned automatically.

3 Press the

button to select

[

Start

For WS-710M, WS-700M only:

• When an microSD card is inserted in the

recorder, be sure to con rm the recording

media as either [Built-in Memory]

or [microSD Card] so that there is no

mistake (☞ P.47, P. 57).

• It may take over 10 seconds to complete

processing. Never perform operations

such as the following while processing, as

they may damage the data. In addition,

replace the battery with a new one in

order to ensure that the battery will not

run out while processing.

1 Disconnecting the AC Adapter while

processing.

2 Removing the battery while

processing.

3 Remove the microSD card ard during

processing when [microSD Card] is

being used as the recording media.

• The default folders of the recorder,

namely [Recorder], including [Folder A]

to [Folder E] and [Radio Folder]) and

[Music] cannot be erased.

• In the [Music] folder, all folders except

[Music] can be deleted.

For WS-600S only:

• It may take over 10 seconds to complete

processing. Never perform operations

such as the following while processing, as

they may damage the data. In addition,

replace the battery with a new one in

order to ensure that the battery will not

run out while processing.

1 Disconnecting the AC Adapter while

processing.

2 Removing the battery while

processing.

• You cannot delete folders through the

recorder.

To EAR

jack

Using the FM radio

About the FM radio

(For WS-710M only)

Using the FM radio

Connecting the earphones

The supplied earphones function as an FM

antenna. You will not be able to receive

FM radio signals if the earphones are not

connected.

• Also note that you will not be able to

receive radio signals in locations not

reached by radio waves, such as areas

outside the broadcast region and areas

surrounded by mountains.

Move to a location where the signal can

be easily received. Inside a building,

broadcast signals will be more easily

received near windows.

The recorder may not be able to receive the

FM signal within or close to buildings

Notes

• Even within the broadcast region, radio signals may be di cult to receive in tunnels or

underground roads, inside or in the shadow of buildings and apartment blocks covered

with a concrete structures, and other similar locations. You may not be able to get radio

reception in these locations.

• For best reception, avoid using the radio at the same time as a cellular phone, PC,

television or other electrical product. Such products may cause noise.

• If you use the radio while connected to the AC adapter (A514 etc.), noise may be

generated. When using the FM radio, be sure to use the battery.

For WS-710M:

Radio reception will vary substantially depending on where you are using the

radio. If the reception is poor, adjust the antenna position or orientation, or place

the recorder in a location where a radio signal can be easily received, such as by a

window.

FM radio mode operations

Plug in the

earphones

+−

button

9 0 button

• To stop FM radio reception, press

the LIST button to go to the [Home]

display. From the [Home] display, you

can change to a different mode.

2 Presetting radio stations.

Presetting radio stations

automatically:

Automatically preset stations to

make it easy to tune. For details,

see “Presetting radio stations

automatically [Auto-preset]”

(

☞ P.43

FM radio mode operations

1 Set to [

FM Radio

] mode (☞ P. 21).

• Change the mode to [FM Radio]

mode.

• The volume can be adjusted within a

range from [00] to [30].

Settings relating to FM radio

[Auto-preset]

(☞ P.43)

Automatically adds

receivable stations to the

presets.

[Scan sense]

(☞ P.47, P. 59)

Allows you to set the scan

sensitivity for auto preset.

[Output]

(☞ P.47, P. 59)

Allows you to set the audio

output of the FM radio.

• You can also select a station which

have not been preset. For details, see

“Changing the reception mode”

(☞ P.4 4).

4 Press the

−

button to adjust

to a comfortable listening

volume.

For WS-710M:

Adding a radio station to the presets:

Change the reception mode to

manual reception, and adjust the

frequency. The station you are tuned

to can then be added

(

☞ P.4 4, P.45

3 Press the 9 or 0 button to

select a station.

• You can select a preset station.

FM radio mode operations

Plug in the

earphones

+−

button

Presetting radio stations

automatically [Auto-preset]

Presetting stations makes it easy to find your

desired station.

3 Press the

or 9

button to move the cursor to the

item to set.

1 Set to [

FM Radio

] mode (☞ P. 21).

2 Press and hold the

button.

• The menu will appear on the display

(☞ P.47 )

4 Press the

or – button to select

[

Auto-preset

5 Press the

button.

• [Auto-preset] will appear on the

display.

• Select [

Cancel

] and press the

OK `/MENU button to return to the

previous display.

6 Press the

button again.

• [Scanning] will appear on the display

and scanning will start. When [Preset

complete] appears, the scan is

complete.

Note

• The preset numbers will be automatically

assigned according to frequency.

FM radio mode operations

Plug in the

earphones

9 0

button

Changing the reception mode

Select the reception mode according to

reception conditions. If the signal from

the station you are looking for is weak and

cannot be detected using Auto Preset,

change to manual reception and fine tune

the frequency.

1 Perform Steps 1 through 3 from

“FM radio mode operations”

(☞ P.42).

Preset call mode:

• Press the 9 or 0 button to

select a preset station.

a Preset number

Auto/Manual mode:

• Press the 9 or 0 button to

adjust the frequency and receive

a signal (Manual reception).

• Repeatedly press the 9 or

0 buttons to scan through

the receivable stations (Auto

reception).

b Tuning frequency

2 Press the

button to

select a reception mode.

• The reception mode will change on

each press of the OK `/MENU button

Plug in the

earphones

+−

button

SCENE

INDEX

button

FM radio mode operations

Adding a radio station

You can add stations from Auto/Manual

reception to the presets.

1 Receive a radio station to preset.

2 Press the

SCENE

INDEX

button.

• Select [

Cancel

] and press the

OK `/MENU button to return to the

previous display.

Deleting a radio station

1 Receive the preset station you

wish to erase.

2 Press the

ERASE

button.

3 Press the

button.

• Up to 30 stations can be preset.

• Select [Cancel] and press the

OK `/MENU button to return to

the previous display.

3 Press the

button.

Note

• The preset numbers will be automatically

assigned according to frequency.

Plug in the

earphones

STOP

(4)button

REC

(s) button

Recording FM radio

• When you record FM radio, the

recording will be stored automatically

in the [FM Radio] folder in the

[Recorder] folder.

Notes

• When recording FM radio, be sure to

connect the earphones to the EAR jack.

• When recording FM radio, the  le name

assigned when recording (☞ P.32) will be

appended with a date and time.

WS710001_100715_0915.WMA

Date: [100715] (2010, July 15)

Time: [0915] (9.15 am)

Recording FM radio

For WS-710M: When recording FM radio:

Even if the FM radio sounds good, certain

reception conditions may cause noise

once the recording has started. To ensure

that there are no mistakes with the

recording, make a test recording. Also, be

sure to record in a location with the best

possible reception.

1 Receive the broadcast program

you wish to record (☞ P. 21, P. 42).

2 In menu settings relating to FM

radio, set [

Output

] to [

Earphones

]

(☞ P.47, P.59).

• If [Output] is set to [Speaker],

you will not be able to record.

3 Press the

REC

(s) button to start

recording.

• The recording indicator light glows

and [´] will appear on the display.

a Recording format

b Preset number

c Tuning frequency

d Elapsed recording time

e Remaining recording time

4 Press the

STOP

(4) button to stop

recording.

• [´] will disappear and the reception

display will return.

Menu setting method

+−

button

9 0 button

button

Menu setting method

1 While the recorder is during

stop mode, press and hold the

button.

• The menu will appear on the display.

Menu setting

• Menu items can be set during a

recording or playback (☞ P.48).

2 Press the

−

button to move

to the tab that contains the item

you want to set (☞ P. 49 to P. 64).

• You can change the menu display by

moving the settings tab cursor.

3 Press the

or 9

button to move the cursor to the

item to set.

4 Press the

−

button to move

to the item you want to set.

5 Press the

or 9

button.

• Moves to the setting of the selected

item.

6 Press the

−

button to change

the setting (☞ P.49 to P.64).

Items in menus are categorized by tabs, so

select a tab first and move to a desired item

to quickly set it. You can set each menu item

as follows.

7 Press the

button to

complete the setting.

• You will be informed that the settings

have been established via the screen.

Menu setting method

• Pressing the 0 button without

pressing the OK `/MENU button will

cancel the settings and return you to

the previous screen.

8 Press the

STOP

(4) button to

close the menu screen.

• When in the menu screen during

recording or playback, pressing the

0 or STOP (4) button will allow

you to return to the playback screen

without interrupting recording or

playback.

Notes

• The recorder will stop if you leave it

idle for 3 minutes during a menu setup

operation, when a selected item is not

applied.

• When entering menu settings during

recording or playback, the menu settings

will be cancelled if 8 seconds elapse with

no buttons being pressed.

4 Setting menu during recording:

Function Setting

[Mic Sense]

To menu item

options

[Zoom Mic]*1

[Low Cut Filter]

[VCVA]

[Backlight]

[LED]

4 Setting menu during playback:

Function Setting

[Property]

To menu item

options

[Noise Cancel]*2

[EUPHONY]*3

[Voice Filter]*4

[Play Mode]

[Equalizer]*3

[Skip Space]

[Backlight]

[LED]

4 Setting menu during FM radio

reception (For WS-710M only):

• During recording in [FM Radio]

mode, only the [Backlight] and [LED]

settings are possible.

Function Setting

[Rec Mode]

To menu item

options

[Auto-preset]

[Scan sense]

[Backlight]

[LED]

[Output]

*1 For WS-710M only.

*2 For WS-710M, WS-700M only (It only

works in [Recorder] mode).

*3 For WS-710M, WS-700M only (It only

works in [Music] mode).

*4 It only works in [Recorder] mode.

Menu setting method

, Rec Menu

Mic Sense

Microphone sensitivity is adjustable to meet

recording needs.

[High]: Highest recording sensitivity suitable

for recording at a distance or low volume,

such as at conferences with a large

number of people.

[Middle]: Suitable for recording meetings

and seminars with a small number of

people.

[Low]: Lowest recording sensitivity suitable

for dictation.

• When you would like to clearly record

a speaker’s voice, set [Mic Sense] to

[Low] and hold recorder’s built-in stereo

microphone close to the speaker’s mouth

(5-10 cm) when recording.

Rec Mode

The recorder can record in the linear PCM

format (For WS-710M, WS-700M only). High

resolution recording at a high sampling rate

and high bit rate equivalent or superior to

that of a music CD is possible. Moreover, it

also supports the MP3 and WMA formats.

1 Select the recording format.

[PCM]*: This is an uncompressed audio

format which is used for music CDs

and the like.

[MP3]: MPEG is the international

standard established by a working

group of the ISO (International

Organization for Standardization).

[WMA]: This is an audio compression

encoding method that was

developed by the Microsoft

Corporation in the US.

* For WS-710M, WS-700M only.

+ File Menu

Erase Lock

Locking a file keeps important data from

being accidentally erased. Locked files are

not erased when you select to erase all files

from a folder (☞ P. 39).

[On]:

Locks the file and prevents it from being

erased.

[Off]:

Unlocks the file and allows it to be erased.

Replace

Refer to “Rearranging files [Replace]”

(☞ P. 59).

File Divide

Refer to “Dividing Files [File Divide]”

(☞ P.6 0).

Property

File and folder information can be

confirmed from the menu screen.

When the file is selected:

[Name] (File name), [Date] (Time stamp),

[Size] (File size), [Bit Rate]*1 (File format),

[Artist]*2 (Artist name) and [Album]*2

(Album name) will appear on the display.

*1 When a linear PCM format  le has been

selected, [Bit Rate] area displays the

sampling frequency and bit rate.

*2 When a  le contains no tag information,

the display contents of this area are blank.

When [Recorder] is selected, [Artist] and

[Album] will not appear on the display.

When the folder is selected:

[Name] (File name), [Folder]*1 (Number

of folder) and [File]*2 (Number of file) will

appear on the display.

*1 When [Recorder] is selected, [Folder] will

not appear on the display.

*2 Files which cannot be recognized by this

recorder are not included in the number

of  les.

• Select the files for which you would like

to confirm information in advance before

operating the menu.

Menu setting method

2 Select the recording rate.

When [

PCM

] is selected:

[44.1 kHz/16 bit]*1

When [

MP3

] is selected:

[256 kbps]*1, [192 kbps]*2,

[128 kbps]

When [

WMA

] is selected:

[ST XQ], [ST HQ], [ST SP], [HQ], [SP], [LP]

*1 For WS-710M, WS-700M only.

*2 For WS-600S only.

• To record a meeting and lecture clearly,

set other than [LP] in [Rec Mode].

• When the external monaural microphone

is used while [Rec Mode] is set to a stereo

recording mode, it enables recording

only with the L channel microphone.

Zoom Mic

• When you increase the value, the

directivity will narrow.

• Decreasing the value widens the

directivity, enables you to record in a

expansive stereo sound.

•

If you reduce the directivity and widen the

recording range, you can record in a sound

with expansive stereo feeling.

For WS-710M:

The directional microphone function utilizes

DiMAGIC’s (DiMAGIC Co., Ltd.) DiMAGIC

Virtual Microphone (DVM) technology.

DVM is an audio pickup system which

allows you to record by focusing on sound

from any direction. From expansive stereo

recording to high directivity recording, DVM

represents the latest in directional control

methods that allow you to switch to a single

exclusive microphone.

Low Cut Filter

The recorder has a Low Cut Filter function to

minimize low-frequency sounds and record

voices more clearly. This function can reduce

noise from air conditioners, projectors and

other similar noises.

[On]:

Enables the Low Cut Filter function.

[Off]:

Disables this function.

VCVA

When the microphone senses that sounds have

reached a preset threshold volume level, the

built-in Variable Control Voice Actuator (VCVA)

starts recording automatically, and stops when

the volume drops below the threshold level.

The VCVA feature extends recording time and

conserves memory by stopping recording

during silent periods, which helps the playback

to be more efficient.

[On]:

Enables the VCVA function. Will start

recording in VCVA mode.

[Off]:

Disables this function. Will resume

recording in normal mode.

• When [V-Sync. Rec] is set to [On], [VCVA]

is disabled. To use this function, set

[V-Sync. Rec] to [Off] (☞ P. 51).

Adjust the start/stop actuation

level:

1 Press the

REC

(s) button to start

recording.

• When the sound volume is lower than

the preset threshold sound level,

recording automatically stops after

1 sec approximately, and [Standby]

flashes on the display. The recording

indicator light glows when recording

starts and flashes when recording

pauses.

Menu setting method

2 Press the 9 or 0 button

adjust the start/stop actuation

level.

• The VCVA level can be set to any of 15

different values.

• The higher the value, the more

sensitive the recorder to sounds. At

the highest value, even the faintest

sound will activate recording.

a Level meter (varies according to the

sound volume being recorded)

b Start level (moves to the right/left

according to the set level)

• The start/stop actuation level also varies

depending on the selected microphone

sensitivity mode (☞ P.49) .

• If the starting level is not adjusted within

2 seconds, the display will return to the

previous.

• If the surrounding noise is loud, the

starting sensitivity of the VCVA can be

adjusted according to the recording

situation.

• To ensure successful recordings, prior

testing and adjustment of the start/stop

actuation level is recommended.

V-Sync. Rec

Voice sync recording starts when a voice

louder than the voice sync level (detection

level) is detected. When the voice becomes

quiet, recording will automatically stop. When

voice sync recording is on and the input level

falls below the voice sync level (detection level)

for a period of at least the specified detection

time, the recorder will stop.

1 Select the [

] or [

Off

[On]: Enables the Voice sync recording

function.

[Off]: Disables this function.

• If you select [On], proceed to the

operation of Step 2.

2 Sets the detection time.

[1 second] [2 seconds] [3 seconds]

[5 seconds] [10 seconds]:

If the input (recording level) is equal

to or below the specified level for

longer than the specified detection

time, the recorder stops.

Adjust the voice sync level:

1 Press the

REC

(s) button to start

recording.

• To use voice sync recording, set

[V-Sync. Rec] to [On] and specify a

detection time.

2 Press the 9 or 0 button

adjust the voice sync level.

• The voice sync level can be set to any

of 15 different values.

• The higher the value, the more

sensitive the recorder to sounds. At

the highest value, even the faintest

sound will activate recording.

Menu setting method

1 Select [

Scene Select

] or

[

Scene Save

a Voice sync level (moves to the

right/left according to the set level)

3 Press the

REC

(s) button again.

• The recorder will go into standby.

[Standby] will flash on the display

and the recording indicator light will

flash.

• When the input is at or above the

voice sync level, recording will start

automatically.

4 Voice sync recording stops

automatically.

• If sound at a volume below the voice

sync level continues for the specified

time, voice sync recording will end

automatically, and the recorder

will return to the standby mode of

Step 3. Every time the recorder enters

standby mode, the file will be closed

and recording will continue in a

different file.

• To stop the recorder during voice

sync recording, press the STOP (4)

button.

• When [VCVA] is set to [On],

[V-Sync. Rec] is disabled. To use this

function, set [VCVA] to [Off] (☞ P. 50).

Rec Scene

The recording setting can be selected from

the [Lecture], [Conference], [Meeting],

[Dictation] templates to suit the recording

scene or situation. You can also save a

recording setting of your choice.

[Scene Select]: Select a recording

scene from the templates to suit the

recording scene and conditions. For

details, see “Template settings”

(☞ P.53). Alternatively, select

recording scene customized for a

particular purpose.

[Scene Save]: You can save up to 3 sets

of menu settings relating to a current

recording.

• If you select [Scene Select], proceed

to the operation of Step 4.

When [

Scene Save

] is selected:

2 Set the recording settings

according to your preferences.

3 Specify a save destination.

• You can select the save destination

from [User Setting 1], [User Setting 2]

and [User Setting 3].

When [

Scene Select

] is selected:

4 Select the recording scene.

Menu setting method

Template settings:

[Lecture]:

[Mic Sense] [High]

[Rec Mode] [MP3]: [128 kbps]

[Zoom Mic]* [+6]

[Low Cut Filter] [On]

[VCVA] [Off]

[V-Sync. Rec] [Off]

[Conference]:

[Mic Sense] [High]

[Rec Mode] [MP3]: [128 kbps]

[Zoom Mic]* [Off]

[Low Cut Filter] [On]

[VCVA] [Off]

[V-Sync. Rec] [Off]

[Meeting]:

[Mic Sense] [Middle]

[Rec Mode] [MP3]: [128 kbps]

[Zoom Mic]* [Off]

[Low Cut Filter] [On]

[VCVA] [Off]

[V-Sync. Rec] [Off]

[Dictation]:

[Mic Sense] [Low]

[Rec Mode] [WMA]: [HQ]

[Zoom Mic]* [Off]

[Low Cut Filter] [On]

[VCVA] [Off]

[V-Sync. Rec] [Off]

[DNS]:

For Dragon Naturally Speaking

(Nuance Communications Inc.)

* For WS-710M only

• If you select a recording scene, you

will not be able change the above-

described menu settings relating

recording. If you wish to use these

functions, set [Rec Scene] to [Off].

To check the settings:

On the [Scene Select] display, select

a recording scene using the + and

 buttons, and press the 9 button.

Press the 0 button to return to the

[Scene Select] display.

For WS-710M/WS-700M:

If recorded audio is difficult to understand

because of noisy surroundings, adjust the

Noise Cancel setting level.

[High] [Low]: Enables the Noise Cancel

function. Noise will be reduced in the file

when it’s played back for better sound

quality.

[Off]: Disables this function.

• When [Noise Cancel] is set to [Low] or

[High], slow/high speed playback and

[Voice Filter] will not function. To use

these functions, set [Noise Cancel] to

[Off] (☞ P. 36, P.5 4).

• [Noise Cancel] only works in [Recorder]

mode.

EUPHONY

For WS-710M/WS-700M:

This recorder is equipped with “EUPHONY

MOBILE”, the latest in surround sound systems

which combines bandwidth correction,

expansion technology, and virtual acoustical

source processing technology. In addition

to its natural, expansive feel, the recorder is

equipped with the exceptional feature wherein

listeners are less prone to developing an

compressed or closed-in feel, or to growing

tired over extended listening. On top of this,

listeners are less prone to developing an

oppressed or closed-in feel, or to growing tired

over extended listening. Level adjustments of

the EUPHONY setting can be set to four stages

according to preference.

- Play Menu

Noise Cancel

Menu setting method

Play Mode

You can select the playback mode that fits

your preference.

Select the desired playback range:

1 Select [

Play Area

2 Select [

File

], [

Folder

] or [

All

[File]: Selects the current file.

[Folder] Selects the current folder.

[All]: Selects all files in the internal

memory.

Select the desired playback mode:

1 Select [

Repeat

] or [

Random

[Repeat]: Sets to repeat playback mode.

[Random]: Sets to random playback

mode.

2 Select [

] or [

Off

[On]: Sets the playback range to be

played back repeatedly or randomly.

[Off]: Disables this function.

For WS-710M/WS-700M:

• Set to [Music] mode.

[Power]:

This mode focuses more on lower sound

registers.

[Wide]:

This mode has an even more expansive

feel.

[Natural]:

This mode achieves natural bandwidth

correction and acoustical field expansion.

[Off]:

Disables this function.

• When [EUPHONY] is set to [Power],

[Wide] or [Natural], slow/high speed

playback will not function. To use these

functions, set [EUPHONY] to [Off]

(☞ P. 36).

• [EUPHONY] only works in [Music] mode.

• When playing back using the built-

in speaker, the EUPHONY function is

disabled.

Voice Filter

The recorder has a Voice Filter Function to

cut low and high frequency tones during

normal, fast, or slow playback, and enable

clear audio playback.

[On]:

Enables the Voice Filter function.

[Off]:

Disables this function.

For WS-710M, WS-700M only:

• When [Voice Filter] is set to [On],

[Noise Cancel] will not function. To use

this function, set [Voice Filter] to [Off]

(☞ P. 53).

• [Voice Filter] only works in [Recorder]

mode. [File]: Stop after playing back the current

file.

[Folder]: Play files continuously in the

current folder until the last file and stop.

• In [File] mode, when the recorder comes

to the end of the last  le in the folder,

[End]  ashes for two seconds on the

display and the recorder stops at the start

of the last  le.

For WS-710M/WS-700M:

• Set to [Recorder] mode.

For WS-600S:

Menu setting method

For WS-710M/WS-700M:

Skip Space

This function enables you to skip (forward)

or reverse skip (rewind) a file being played

for a set period. This function is convenient

for quickly skipping to another playback

position or repeatedly playing back short

phrases.

1 Select [

Forward Skip

] or

[

Reverse Skip

2 Set the skip space.

When [

Forward Skip

] is selected:

[File Skip] [10sec. Skip] [30sec. Skip]

[1min. Skip] [5min. Skip]

[10min. Skip]

When [

Reverse Skip

] is selected:

[File Skip] [1sec. Skip] – [5sec. Skip]

[10sec. Skip] [30sec. Skip]

[1min. Skip] [5min. Skip]

[10min. Skip]

Forward/Reverse Skip Playback:

1 Press the

button to

start playback.

2 Press the 9 or 0 button.

• The recorder will skip (forward) or

reverse skip (rewind) a set space and

start playing back.

• If there is an index mark/temp mark or

a cue closer than the skip space, the

recorder will forward skip/reverse skip to

that position.

Play Scene

Voice files recorded in the recorder and

music files downloaded from the PC can be

saved in the playback settings of your choice

to suit the different sound qualities and

playback methods.

1 Select [

Scene Select

] or

[

Scene Save

[Scene Select]:

Select a playback scene customized

to your preferences.

• In [Folder] mode, when the recorder

comes to the end of the last  le in the

folder, [End]  ashes for two seconds on

the display and the recorder stops at the

start of the  rst  le in the folder.

• In [All] mode, after playing the last  le in

the folder, the recorder will start playing

from the  rst  le in the next folder. When

it comes to the end of the last  le in the

recorder, [End]  ashes for two seconds

on the display and the recorder stops at

the start of the  rst  le in the recorder.

Equalizer

If you change the equalizer setting, you can

enjoy the music with your favorite sound

quality.

1 Select the desired equalizer

characteristics.

[Off]: Disables the equalizer function.

[Rock] [Pop] [Jazz]: Enables the

equalizer function.

[User]: Select [User] to save your own

custom equalizer settings. If [User] is

selected, proceed to Step 2.

2 Select the frequency band.

[60 Hz] [250 Hz] [1 kHz] [4 kHz] [12 kHz]:

Select the frequency bandwidth

setting.

3 Select the equalizer level.

• You can select the equalizer level from

[–6] to [+6] in 1dB increments.

• The higher the decibel value, the louder

the sound.

• To change the settings again, press the

9 or 0 button and repeat the

procedure from step 2.

• [Equalizer] only works in [Music] mode.

Menu setting method

[Scene Save]:

You can save up to 5 sets of menu

settings relating to a current

playback.

• If you select [Scene Select], proceed

to the operation of Step 4.

When [

Scene Save

] is selected:

2 Set the playback settings

according to your preferences.

3 Specify a save destination for the

settings.

For WS-710M, WS-700M only:

• You can select the save destination

from among [Voice 1] to [Music 3].

For WS-600S only:

• You can select the save destination

from among [Voice 1] to [Voice 5].

When [

Scene Select

] is selected:

4 Select the playback scene.

To check the settings:

On the [Scene Select] display, select

a playback scene using the + and

buttons, and press the 9 button.

Press the 0 button to return to the

[Scene Select] display.

. LCD/Sound Menu

Backlight

The display will remain lit for about 10 (Initial

setting) seconds when a button on the

recorder is pressed.

[Off]:

Disables this function.

[5seconds] [10seconds] [30seconds]

[1minute]:

Enables the Backlight function.

Contrast

Display contrast can be adjusted in 12 levels.

• You can adjust the LCD display contrast

level from [01] to [12].

LED

You can set it so the LED indicator light does

not turn on.

[On]:

LED light will be set.

[Off]:

LED light will be cancelled.

Beep

The recorder beeps to alert you to button

operations or warn you of errors. System

sounds may be turned off.

[On]:

Enables the Beep function.

[Off]:

Disables this function.

Language(Lang)

You can select the display language for this

recorder.

[English] [Français] [Español]

[Português (BR)]:

Example:

WS-710M, WS-700M

Menu setting method

Speaker

You can use the built-in speaker when the

earphones are unplugged.

[On]: Output sound from the built-in

speakers. If the earphones are plugged in,

sound will not be output from the built-in

speaker.

[Off]: Do not output sound from the built-in

speaker.

a Speaker muting indicator (Appears

when [Speaker] is set to [Off].)

For WS-710M only:

• This is different function to [Output] of

[FM Menu]. Irrespective of the [Speaker]

setting, in the case that you have set

[Output] to [Speaker] when listening to

the FM radio, sound from the radio will

still be output from the speaker (☞ P. 59).

Power Save

Forgetting to turn the power off can be

prevented. If the recorder remains in stop

mode for over 10 minutes (Initial setting)

while the power is turned on, the power will

be turned off.

[5minutes] [10minutes] [30minutes]

[1hour]:

Set the length of time before the power

will be turned off.

[Off]: Disables this function.

• If any button is pressed, the elapsed time

count before the power turns off will start

over again.

Battery

Select to match the battery you are using.

[Ni-MH]:

Select when using the Olympus Ni-MH

rechargeable battery (BR401).

[Alkaline]:

Select when using a commercially

available alkaline dry battery.

USB Settings

Refer to “Changing the USB class [USB

Settings]” (☞ P.61).

Time & Date

Refer to “Setting time and date

[Time & Date]” (☞ P.17 ).

Reset Settings

This returns the functions back to their initial

settings (factory default).

[Start]:

Returns the settings to their initial values.

[Cancel]:

Takes you back to [Device Menu].

• After resetting the settings, the time

settings and  le numbers will be

preserved from before the reset and will

not return to their initial settings.

For WS-710M/WS-700M:

When an microSD card is inserted you

can select to record to either the built-in

memory or to the microSD card (☞ P.19) .

[Built-in Memory]: Built-in memory.

[microSD Card]: microSD card.

/ Device Menu

Memory Select

Menu setting method

Format

Refer to “Formatting the recorder

[Format]” (☞ P.63).

Memory Info.

The recordable capacity remaining and

overall capacity of the recording media can

be seen from the menu.

• The recorder will use some capacity of

the memory to keep the management

file. For microSD card, the remaining

capacity will be shown l]ess than the total

capacity of the card due to characteristic

of the microSD card, but this is not a

malfunction.

System Info.

You can check the recorder’s information on

the menu screen. [Model] (Model Name),

[Capacity] (Built-in frash memory size),

[Version] (System version) and [Serial No.]

(Serial Number) appears on the display.

Menu settings after setting reset

(initial settings):

, Rec Menu:

[Mic Sense] [Middle]

[Rec Mode]

[WMA] [ST XQ]

[Zoom Mic]*1 [Off]

[Low Cut Filter] [Off]

[VCVA] [Off]

[V-Sync. Rec] [Off]

- Play Menu:

[Noise Cancel]*2 [Off]

[EUPHONY]*3 [Off]

[Voice Filter] [Off]

[Play Mode]*3

[Play Area] [Folder]

[Repeat] [Off]

[Random] [Off]

[Play Mode]*4 [File]

[Equalizer]*3 [Off]

[Skip Space] [File Skip]

. LCD/Sound Menu:

[Backlight] [10seconds]

[Contrast] [Level 06]

[LED] [On]

[Beep] [On]

[Language(Lang)] [English]

[Speaker] [On]

/ Device Menu:

[Memory Select]*5 [Built-in Memory]

[Power Save] [10minutes]

[Battery] [ Ni-MH]*5

[Alkaline]*6

[USB Setting]

[USB Connect] [PC]

[USB Class] [Storage Class]

 FM Menu (For WS-710M only):

[Rec Mode] [WMA]

[Scan sense] [Off]

[Output] [Earphone]

*1 For WS-710M only.

*2 For WS-710M, WS-700M only (It only

works in [Recorder] mode).

*3 For WS-710M, WS-700M only (It only

works in [Music] mode).

*4 For WS-600S.

For WS-710M, WS-700M (It only works in

[Recorder] mode).

*5 For WS-710M, WS-700M only.

*6 For WS-600S only.

Menu setting method

+−

button

9 0 button

button

Rearranging files [Replace]

You can move a file in a folder to change the

order of playback. First select the folder (file)

for which you want to change the playback

order.

1 Select the folder for which you

would like to rearrange the song

order (☞ P.22 to P.24).

2 While the recorder is during stop

mode, select [

Replace

] from the

menu on the [

File Menu

• For details on how to enter the menu

settings, see “Menu setting method”

(☞ P.47 ).

3 Press the

−

button to select

the file you want to move.

 FM Menu

Rec Mode

You can change the recording mode when

recording from the FM radio. Select a

recording mode to suit your purpose.

[PCM]: The recording rate will be

automatically set to [44.1 kHz/16 bit].

[MP3]: The recording rate will be

automatically set to [128 kbps].

[WMA]: The recording rate will be

automatically set to [ST HQ].

Auto-preset

Refer to “Presetting radio stations

automatically [Auto-preset]” (☞ P. 43) .

Scan sense

You change the scan sensitivity when

scanning for radio stations with auto preset.

Select the sensitivity to suit the reception

conditions.

[High]: Receive radio station signals using

high sensitivity. You should normally

select this setting.

[Low]: Receive radio station signal using

reduced sensitivity. Try this setting when

there is interference by signals from

unwanted stations.

Output

You can change the audio output of the FM

radio.

[Earphone]: Output sound from earphones.

Sound will not be output from the

built-in speaker even if you unplug the

earphones.

[Speaker]: Always output sound from built-

in speaker. Sound will not be output from

earphones even if you plug them in.

• This is different function to [LCD/Sound

Menu] of [Speaker]. Irrespective of the

[Speaker] setting, in the case that you

have set [Output] to [Speaker] when

listening to the FM radio, sound from the

radio will still be output from the speaker

(☞ P. 57 ).

For WS-710M:

Menu setting method

+−

button

9 0 button

button

5 Press the

−

button to select

the location to move it to.

6 Press the

button to

complete the setting.

• If there are more files to move, repeat

Steps 3 through 4.

• Pressing the 0 button without

pressing the OK `/MENU button will

cancel the settings and return you to

the previous screen.

7 Press the

STOP

(4) button to close

the menu screen.

Dividing files [File Divide]

Files with large capacities and long

recording times can be divide so that they

are easier to manage and edit.

Only MP3  les and PCM*  les

recorded on this recorder can be

divided.

* For WS-710M, WS-700M only.

1 Stop playback at the divide

position.

• In the file display, the stop position

becomes the divide position.

• While the recorder is during playback

mode, press and hold the 9 or

0 button to fast-forward or rewind

(☞ P. 33).

• It is useful to set index marks on

marking in advance at the divide

position (☞ P. 35).

2 Select [

File Divide

] from the menu

on the [

File Menu

• For details on how to enter the menu

settings, see “Menu setting method”

(☞ P.47 ).

4 Press the

or 9

button.

• The cursor will flash to confirm that

the file can be moved.

Menu setting method

+−

button

9 0 button

button

3 Press the + button to select

[Start].

Notes

• The  le divide cannot be done when the

 le list is displayed.

• The recorder cannot divide  les when the

number of  les in the folder exceeds 199.

• Locked  les cannot be divide (☞ P. 49) .

• After a  le has been divided, the original

 le will be renamed [File name_1.wav]

and the new  le will be named [File

name_2.wav].

• If a  le has an extremely short recording

time, it may not be divided even if it is a

MP3  le or PCM  le.

• Do not remove the battery during

dividing  le. This may damage the data.

4 Press the

button.

• [Dividing!] will appear and file

dividing will start.

• File dividing is completed when [File

divide completed] appears.

Changing the USB class

[USB Settings]

Besides setting to [PC] (Connect to PC to

transfer files) or [AC Adapter] (Connect to

AC adapter to recharge the battery), you

can switch the USB class according to your

usage.

2 Press the + or − button to select

[

USB Connect

] or [

USB Class

[USB Connect]:

Setting for connecting to the PC.

[USB Class]:

Setting for USB class.

3 Press the

or 9

button.

• If you select [USB Class], proceed to

the operation of Step 6.

1 While the recorder is during stop

mode, select [

USB Settings

] from

the menu on the [

Device Menu

• For details on how to enter the menu

settings, see “Menu setting method”

(☞ P.47 ).

Menu setting method

• If you select [USB Connect], proceed

to the operation of Step 8.

When [USB Class] is selected:

6 Press the + or − button to change

the setting.

[Storage Class]: Recognized as an

external memory device from the PC.

[Composite]: Setting when connected

to the PC and used as an external

memory device, USB speaker or

microphone.

When [USB Connect] is selected:

4 Press the + or − button to change

the setting.

[PC]: Setting for when the recorder is

connected to the PC and used as a

storage device or composite device.

Connected as storage or composite.

[AC Adapter]: Setting for when the

recorder is connected to the PC for

charging or to the AC Adapter (A514)

(optional).

[Optional]: Setting to confirm the

connection method each time a USB

connection is made.

5 Press the

button to

complete the setting.

7 Press the

button to

complete the setting.

8 Press the

STOP

(4) button to

close the menu screen.

Notes

• When you  rst connect the recorder to

your PC as an external storage device,

the driver for the recorder will be

automatically installed in your PC.

• The PC cannot recognize when the

recorder is connected to the PC when

setting for the [USB Connect] is set to

[AC Adapter].

• When the recorder is not recognized

by the PC as an external storage device,

change the [USB Class] setting to

[Storage Class].

• If you connect the recorder to the USB AC

adapter with the [USB Connect] setting

still set to [PC], [Please wait] will appear

on the recorder display.

Menu setting method

+−

button

9 0 button

button

Formatting the recorder [Format]

1 While the recorder is during stop

mode, select [

Format

] from the

menu on the [

Divice Menu

• For details on how to enter the

menu settings, see "Menu setting

method"(☞ P. 47).

• If you are using the WS-600S, proceed

to the operation of Step 5.

2 Press the + or − button to select

the recording media to format.

3 Press the

or 9

button.

If you format the recorder, all

files will be removed and all

function settings will return to

defaults except date and time

settings. Transfer any important

files to a computer before

formatting the recorder.

6 Press the

button again to select

[

Start

4 Press the + button to select

[Start].

5 Press the

button.

• After [Data will be cleared] message

is on for two seconds, [Start] and

[Cancel] will turn on.

Example:

WS-710M, WS-700M

Menu setting method

Notes

• Never format the recorder from a PC.

• Once the recorder is formatted, the music

 les with DRM may not be transferred to

the recorder again.

• When the recorder is formatted, all the

saved data, including locked  les and

read-only  les, are erased.

• After formatting, recorded voice  le

names may start from [0001].

• When returning the settings for the

functions to their initial settings, use

[Reset Settings] (☞ P.47, P. 57).

7 Press the

button.

• Formatting begins and [Format !]

flashes on the display.

• [Format Done] appears when

formatting ends.

For WS-710M, WS-700M only:

• When an microSD card is inserted in the

recorder, be sure to con rm the recording

media as either [Built-in Memory]

or [microSD Card] so that there is no

mistake (☞ P.47, P. 57).

• It may take over 10 seconds to complete

processing. Never perform operations

such as the following while processing, as

they may damage the data. In addition,

replace the battery with a new one in

order to ensure that the battery will not

run out while processing.

1 Disconnecting the AC Adapter while

processing.

2 Removing the battery while

processing.

3 Remove the microSD card during

processing when [microSD Card] is

being used as the recording media.

• Formatting on the recorder will be

Quick Format. If you format the microSD

card, information of  le management

is refreshed and the data inside the

microSD card is not deleted completely.

When handing over and disposing the

microSD card, be careful about the

data leakage from the microSD card.

We recommend the microSD card to be

destroyed when you dispose the microSD

card (☞ P.19).

For WS-600S only:

• It may take over 10 seconds to complete

processing. Never perform operations

such as the following while processing, as

they may damage the data. In addition,

replace the battery with a new one in

order to ensure that the battery will not

run out while processing.

1 Disconnecting the AC Adapter while

processing.

2 Removing the battery while

processing.

Operating environment

Using the recorder on your PC

Operating environment

By being connected to a PC, the recorder enables you to do the following:

Windows

Operating System:

Microsoft Windows XP/Vista/7 (Standard

Installation)

Compatible PC’s:

Windows PC’s equipped with more than

one free USB port

Macintosh

Operating System:

Mac OS X 10.4.11 - 10.6 (Standard

Installation)

Compatible PC’s:

Apple Macintosh series equipped with

more than one free USB port

Notes

• This is an operational environment for saving the  les recorded by this recorder to your PC

with USB connection.

• Even if operational environment is satis ed, we do not support such as upgraded OS, the

multi-boot environment and self-modi ed PC’s.

• You can transfer files recorded with this

recorder to a computer, play them back,

and manage them by using Windows

Media Player or iTunes (☞ P.70, P.7 7) .

• The recorder is compatible with WMA,

MP3 and WAV* language content.

* For WS-710M, WS-700M only.

• In addition to its uses as a voice recorder

and a music player, this recorder can

also be used as external memory for

a computer by storing data from a

computer and reading it back out (☞ P.6 9,

P. 81) .

Operating environment

Precautions on using the recorder connected

to a PC

• When you are downloading a  le from

the recorder or uploading a  le to the

recorder, do not remove the USB cable

even if the screen is indicating you can.

Data is still being transferred while the

recording indicator light is blinking.

When removing the USB cable, be sure

to follow the description in ☞ P.68. If the

USB cable is removed before the drive is

stopped, data may not be successfully

transferred.

• On a PC, do not format the drive of the

recorder. Initialization is not successfully

achieved on a PC. For initialization, follow

the instructions in [Format] screen of the

recorder (☞ P.63).

• Folder (directory) names appeared by

 le management tools such as Explorer

in Microsoft Windows and Finder in

Macintosh are di erent from the folder

names that can be set with the recorder.

• If folders or  les stored on the recorder

are moved or renamed using a  le

management tool in Windows or

Macintosh, the order of  les may

be changed or  les may become

unrecognizable.

• Data can be written or uploaded to the

recorder even though the attribute of the

recorder drive is shown as Read-only by

the operating system of the PC.

• As the noise may cause adverse e ects on

electronics devices nearby the recorder,

unplug the external microphone and

earphone when you connect the recorder

to a PC.

(DRM)

By the Copyright Act, any voice/music

files and music CDs downloaded from the

Internet without the copyright holder’s

permission may not be reproduced,

distributed, publicized/re-publicized on

the Internet, or converted into WAV, WMA

or MP3 files for the purpose of commercial

business or sale.

A WMA file may be provided with DRM

(Digital Right Management) for copyright

protection. DRM limits the file to copy or

distribute music files that are converted

(ripped) from a music CD or downloaded

from music distribution services. To transfer

a WMA file with DRM to the recorder, you

need to use appropriate methods such as

Windows Media Player. Copying the music

files with DRM purchased from online music

distribution service to a portable device

such as this recorder may be restricted.

Note

• This recorder is compatible with

Microsoft Corporation DRM9, but not

with DRM10.

Connecting to your PC

1 Boot the PC.

2 Slide the USB connector slide

lever in the direction indicated

by the arrow to eject the USB

connector out of the recorder.

3 Make sure that the recorder is

stopped, and connect to the PC’s

USB port.

Windows:

When you open [My Computer], it

will be recognized by the drive name

of the product name.

Macintosh:

When you connect the recorder to a

Mac OS, it will be recognized by the

drive name of the product name on

the desktop.

• [Remote (Storage)] is appeared

on recorder if the USB cable is

connected.

Notes

• Refer to the user’s manual for your PC

regarding the USB port on your PC.

• Be sure to push the cable connector all

the way in. Otherwise, the recorder may

not operate properly.

• Use the supplied USB extension cable

depending on situations.

• When connecting the recorder through

an USB hub the operation may become

unstable. In such cases, refrain from using

a USB hub.

• Do not use USB extension cables other

than the supplied cable.

Using cables from other manufacturers

could result in damage to the recorder.

Do not use the supplied USB extension

cable with devices from other

manufacturers.

For WS-710M,

WS-700M only

For WS-600S only

Connecting to your PC

Disconnecting from your PC

• The drive letter will differ depending

on the PC being used.

• When the window indicating that it

is safe to remove hardware window

appears, close the window.

2 Make sure that the recording

indicator light is off, and

disconnect the recorder from the

PC.

Windows

1 Click [ ] on the task bar

located at the lower-right corner

of the screen. Click [

Safely

remove USB Mass Storage Device

Macintosh

1 Move the drive icon for this

recorder that is appear on the

desktop to the garbage bin by

Drag & Drop it.

• When you connect the recorder to a

Mac OS, it will be recognized by the

drive name of the product name on

the desktop.

2 Make sure that the recording

indicator light is off, and

disconnect the recorder from the

PC.

Note

• NEVER disconnect the USB while the recording indicator light is  ashing. If you do, the

data will be destroyed.

Transfer the voice files to your PC

Folder A

Folder B

Folder C

Folder D

Folder E

FLD_FM

Music

Folder A

Folder B

Folder C

Folder D

Folder E

FM folder*2

WS_71

Folder A

Folder B

Folder C

Folder D

Folder E

FLD_FM

Music

Folder A

Folder B

Folder C

Folder D

Folder E

FM folder*2

Windows

Removable

Disk

Macintosh

Untitled

Transfer the voice files to your PC

The 5 voice folders of this recorder are appeared as [Folder A], [Folder B], [Folder C],

[Folder D] and [Folder E], and the recorded voice files are saved in these folders (When using

the WS-710M, FM radio recordings will be saved in [FLD_FM]).

Windows

1 Connecting the recorder to your

PC (☞ P.67).

2 Open the Explorer window.

• When you open [My Computer],

it will be recognized by the drive

name of the product name (When

an microSD card is inserted it will

be recognized by the drive name

[Removable Disk] *1).

3 Open the product name folder.

4 Copy the data.

5 Disconnect the recorder from the

PC (☞ P.6 8).

Macintosh

1 Connecting the recorder to your

PC (☞ P.67).

• When you connect the recorder to

a Mac OS, it will be recognized by

the drive name of the product name

on the desktop (When an SD card is

inserted it will be recognized by the

drive name [Untitled] *1).

2 Double-click the product name

icon on the desktop.

3 Copy the data.

4 Disconnect the recorder from the

PC (☞ P.6 8).

Notes

• While transmitting data, [Busy] is

appeared, and the recording indicator

light  ashes. NEVER disconnect the

USB while the recording indicator light

is  ashing. If you do, the data will be

destroyed.

• In the Mac OS operational environment,

WMA format  les cannot be played back.

*1 Recognized by the drive name of the

product name.

*2 For WS-710M only

*3 For WS-710M, WS-700M only.

4 Drive name and folder name when

a personal computer is connected:

Built-in flash memory

microSD card *3

Drive name Folder name

Using Windows Media Player

579

68 0

579

680

Using Windows Media Player

Windows Media Player 12

Music files that have been imported to your computer from music CDs and acquired over the

Internet can be transferred to and played back with this recorder. It supports WAV, MP3, and

WMA format music files.

By using Windows Media Player, music files from music CDs can be converted (ripped)

(☞ P.71) and music files that you have bought from any music distribution sites can be easily

transferred to the recorder (☞ P. 72 , P. 75).

Window names

1 Features taskbar

2 Seek slider

3 Shuffle button

4 Repeat button

5 Stop button

6 Previous button

7 Playback button

8 Next button

9 Mute button

0 Volume slider

Windows Media Player 11

Using Windows Media Player

2 3

Copying music from CD

1 Insert CD into the CD-ROM drive,

and start Windows Media Player.

2 From the Features taskbar, click

[

Rip CD

] menu.

• For Windows Media Player 11 Click

[Rip].

• If Internet connectivity is available,

CD information is searched.

3 Put a check mark on the music

file that you want to copy.

4 Click [

Start Rip

• Files copied to a PC are stored in

WMA format. Music files copied are

categorized by artist, album, genre,

etc. and added to the play list.

Windows Media Player 11

Windows Media Player 12

Using Windows Media Player

Transferring music file to the recorder

You can transfer the music files saved in your PC to this recorder. For how to copy the music

files from the CD to your PC, see “Copying music from CD” (☞ P.71).

Windows Media Player 12

1 Connect the recorder to a PC, and

start Windows Media Player.

2 From the [

Organize

] menu, click

[

Options

]. At the Options dialog

box, click the [

Devices

] tab.

3 Select the recorder product name

from among the devices, and

click [

Properties

• Click on the [Create folder hierarchy

on device] to check.

If you uncheck and syncronize the

file, it will be transfered under the

folder [Home], and the file will not be

indicated. *1 *2

• The folder with artist name or album

name is automatically created. This

will make you find the file you want to

listen to more easily.

*1 If [Create folder hierarchy on

device] is checked by default, click

to uncheck the box once, and click it

again to check.

*2 After the synchronous transfer to the

recorder, a file named “WMPInfo.xml”

is created. If you delete this file, the *1

may need to be set again.

Using Windows Media Player

2 3

Using Windows Media Player

Windows Media Player 11

1 Connect the recorder to a PC, and

start Windows Media Player.

2 From the Features taskbar, click

[

Sync

3 Click [

Sync

] menu again to select

[

DVR

] { [

Advanced Options

] {

[

Set Up Sync

], and set as follows.

• Click on [Create folder hierarchy on

device] to check. *1 *2

4 Select the desired category from

[

Library

] on the left, and select

music files or albums to transfer

to the recorder, and Drag & Drop

them in [

Sync list

] on the right.

5 Click [

Start sync

• The file is transferred to the recorder.

Note

• Refer to the online help of Windows Media Player for details.

Using Windows Media Player

4 5

Notes

• Copying the music  les with DRM purchased online music distribution service to a

portable device such as this recorder may be restricted.

• To transfer the  les by using Windows Media Player 9 or Windows Media Player 10, check

the Olympus website.

• If the music  les are transferred to the recorder until it reaches to the maximum memory,

the message [Can’t make the system file. Connect to PC and delete unnecessary file]

may appear on this recorder’s display. In such a case, erase the  les to make free space

(hundreds of KB to dozens of MB depending on the music  le sizes) for the management

 le (The more capacity for the management  le will be necessary as the number of the

music  les increases).

4 Select the desired category from

[

Library

] on the left, and select

music files or albums to transfer

to the recorder, and Drag & Drop

them in [

Sync List

] on the right.

5 Click [

Start Sync

• The file is transferred to the recorder.

• The folder with artist name or album

name is automatically created. This

will make you find the file you want to

listen to more easily.

*1 If [Create folder hierarchy on

device] is checked by default, click

to uncheck the box once, and click it

again to check.

*2 After the synchronous transfer to the

recorder, a file named “WMPInfo.xml”

is created. If you delete this file, the *1

may need to be set again.

Using Windows Media Player

Copying voice file to the CD

You can transfer the voice files in the recorder to your PC and copy them to CD. For how to

copy the voice files from the recorder to your PC, see “Transfer the voice files to your PC”

(☞ P.6 9).

1 Insert the blank CD-R/RW into

the CD-R/RW drive, and start

Windows Media Player.

2 From the Features taskbar, click

the [

Burn

] menu.

3 Select the desired category from

[

Library

] on the left, and select

voice files or albums to copy to

the CD-R/RW, and Drag & Drop

them in [

Burn list

] on the right.

Windows Media Player 12

4 Click the [

Burn

] tab, and select

[

Data CD or DVD

] or [

Audio CD

When [

Audio CD

] is selected:

A file is converted and copied in

CD in order to play it by the audio

equipment which can play CD-R/RW.

When [

Data CD or DVD

] is selected:

Copying files with the format to be

recorded.

5 Click [

Start burn

Using Windows Media Player

2 4

Notes

• Copying the music  les with DRM purchased online music distribution service to a

portable device such as this recorder may be restricted.

• Refer to the online help of Windows Media Player for details.

1 Insert the blank CD-R/RW into

the CD-R/RW drive, and start

Windows Media Player.

2 From the Features taskbar, click

[

Burn

] menu.

3 Select the desired category from

[

Library

] on the left, and select

voice files or albums to copy to

the CD-R/RW, and Drag & Drop

them in [

Burn List

] on the right.

4 Click [

Burn

] menu again, and

select [

Audio CD

] or [

Data CD

When [

Audio CD

] is selected:

A file is converted and copied in

music CD in order to play it by the

audio equipment which can play

CD-R/RW.

When [

Data CD

] is selected:

Copying files with the format to be

recorded.

5 Click [

Start Burn

Windows Media Player 11

4567

890

Using iTunes

1 Features taskbar

2 Rewind button/

Playback, Pause button/

Fast Forward button

3 Volume slide

4 Playlist addition button

5 Shuffle button

6 Repeat button

7 Display change button

8 Disc create button

9 Browse button

0 Disc eject button

Window names

Music files that have been imported to your computer from music CDs and acquired over

the Internet can be transferred to and played back with this recorder. It supports MP3 format

music files.

By using iTunes, music files from music CDs can be converted (ripped) (☞ P.78) and music

files that you have bought from any music distribution sites can be easily transferred to the

recorder (☞ P.7 9, P. 8 0 ).

Using iTunes

32 4

Using iTunes

Copying music from CD

1 Insert the CD into the CD-ROM

drive, and start iTunes.

2 Click [

iTunes

] { [

Preferences

3 Click [

Advanced

] tag.

4 Click [I

mporting

5 Set the file format and bit rate for

copying music files to your PC,

and click [

• This recorder supports MP3 and WAV*

format music files (☞ P. 3 4).

* For WS-710M, WS-700M only.

[

Import Using

Set the file format for copying

music file from a CD. Please select

[MP3 Encoder] or [WAV Encoder].

[

Setting

Set the bit rate for copying music file

from a CD.

6 Put a check mark on the music

files that you want to copy.

7 Click [

Import CD

Using iTunes

Drag & Drop

files here

Transferring music file to the recorder

You can transfer the music files saved in your PC to this recorder. For how to copy the music

files from the CD to your PC, see “Copying music from CD” (☞ P.7 8).

1 Connect the recorder to a PC, and

start iTunes.

2 Select the play list to be

transferred to the recorder, and

put the check marks on the music

files that you want to transfer.

• The order of music pieces can be

changed by Drag & Drop of the music

file in the play list displayed.

3 Double-click the corresponding

drive with the recorder, and open

[

Music

] folder.

• When you connect the recorder to a

Mac OS, it will be recognized by the

drive name of the product name on

the desktop.

• Copy to [Music] folder of the recorder

when transferring the music file.

• You can create up to 2 hierarchies in

[Music] folder. And up to 128 folders

can be made including [Music] folder.

• Up to 200 files can be stored in each

folder.

4 Select the desired files, and Drag

& Drop them to [

Music

] folder.

Using iTunes

Copying voice file to the CD

You can transfer the voice files in the recorder to your PC and copy them to CD. For how to

copy the voice files from the recorder to your PC, see “Transfer the voice files to your PC”

(☞ P.6 9).

1 Insert the CD-R/RW into the

CD-R/RW drive, and start iTunes.

2 Select the desired playlist, and

put a check mark on the voice

files to copy to the CD-R/RW.

3 Click [

Burn Disc

4 Set the CD format for copying

voice files to CD-R/RW, and click

[

When [

Audio CD

] is selected:

A file is converted and copied in

music CD in order to play it by the

audio equipment which can play

CD-R/RW.

When [

MP3 CD

] is selected:

Copying in MP3 format.

When [

Data CD

] is selected:

Copying files with the format to be

recorded.

Using as external memory of the PC

In addition to its uses as a voice recorder and a music player, this recorder can also be used as

external memory for a computer by storing data from a computer and reading it back out.

With the recorder connected to your PC, you can download data from the memory to your PC

and upload data stored on your PC to the memory.

Windows

1 Connecting the recorder to your

PC (☞ P.67).

2 Open the Explorer window.

• When you open [My Computer], it

will be recognized by the drive name

of the product name.

3 Open the product name folder.

4 Copy the data.

5 Disconnect the recorder from the

PC (☞ P.6 8).

Macintosh

1 Connecting the recorder to your

PC (☞ P.67).

• When you connect the recorder to a

Mac OS, it will be recognized by the

drive name of the product name on

the desktop.

2 Double-click the product name

icon on the desktop.

3 Copy the data.

4 Disconnect the recorder from the

PC (☞ P.6 8).

Note

• While transmitting data, [Busy] is displayed, and the recording indicator light  ashes.

NEVER disconnect the USB while the recording indicator light is  ashing. If you do, the

data will be destroyed.

Alarm message list

Other information

Alarm message list

Message Meaning Explanation Action

[Battery Low] Low battery power. Battery power is getting

low.

Charge the battery (For

WS-710M, WS-700M

only) or replace with new

battery (☞ P.10 , P.12).

[File Protected] Erase-locked. Tried to delete a locked

file.

Unlock the file (☞ P. 47,

P.49).

[Cannot record in this

folder]

For WS-710M, WS-700M only:

Not an audio-recording

folder.

Tried to record in the

[Radio Folder] (For WS-

710M only) or in a mode

other than [Recorder]

mode.

Set [Recorder] mode,

re-select from [Folder A]

through [Folder E] and

record (☞ P.21, P. 24) .

[Index Full] Index full.

The file is full of index

marks (maximum of 16

marks).

Erase index marks that

are no longer

required (☞ P. 35).

[Temp Mark Full] Tempmark full.

The file is full of

Tempmarks (maximum

of 16 marks).

Erase Tempmarks that

are no longer required

(☞ P. 35).

[Folder Full] Folder full. The folder is full of files

(maximum of 200 files).

Erase unnecessary files

(☞ P. 3 9).

[Memory Error] Error in the memory. Error in the memory.

This is a malfunction, so

go to the store where

you purchased the

recorder or an Olympus

service station for repair

(☞ P.91).

[Card Error]

For WS-710M, WS-700M only:

Error in the memory. microSD card is not

recognized correctly.

Remove the microSD

card, and put it again

(☞ P.19 t o P. 20).

[Licence Mismatch] Illegally copied file. The music files copied

illegally. Erase the file (☞ P. 39).

[Memory Full] Zero remaining memory. No remaining memory. Erase unnecessary files

(☞ P. 3 9).

[No File] No file. No files were found in

the folder.

Select another folder

(☞ P.22 to P.24).

[Format Error] Formatting error.

There was an error while

formatting the recorder’s

memory.

Reformat the memory

(☞ P.63).

Alarm message list/Troubleshooting

Troubleshooting

Message Meaning Explanation Action

[Can’t make the

system file. Connect

to PC and delete

unnecessary file]

The management file

cannot be created.

The file for management

cannot be created due

to a shortage of capacity

for remaining memory.

Connect the recorder to

a computer and delete

any unnecessary files.

[Cannot play this file] File which cannot be

played. Incompatible format.

Please confirm the file

that can be played on

this recorder (☞ P. 3 4).

[This file can't be

divided]

File which cannot be

split.

Attempting to split a file

besides the MP3 or PCM

files recorded in this

recorder.

Please select another file.

Symptom Probable cause Action

Nothing appears on

the display

The batteries are not loaded properly. Verify that the batteries’ polarities =

and - are correct (☞ P.10).

Battery power is getting low.

Charge the battery (For WS-710M,

WS-700M only) or replace with new

battery (☞ P.10 , P.12).

The power is off. Turn the power on (☞ P.15 ) .

Won’t start

Battery power is getting low.

Charge the battery (For WS-710M,

WS-700M only) or replace with new

battery (☞ P.10 , P.12).

The power is off. Turn the power on (☞ P.15 ) .

The recorder is in HOLD mode. Release the recorder from HOLD

(☞ P.16) .

Unable to record

Low remaining memory. Erase unnecessary files (☞ P. 39) .

The maximum number of files has

been reached.

Change to the another folder

(☞ P. 2 2 t o P. 24).

No playback tone

heard

The earphone is connected. Unplug the earphones to use the

internal speaker.

[Speaker] is set to [Off]. To play back using the built-in speaker,

set [Speaker] to [On] (☞ P.47, P. 57 ).

The volume level is set to [00]. Adjust the volume level (☞ P. 31).

Troubleshooting

Symptom Probable cause Action

Recording level too

low

The microphone sensitivity is too low. Set [Mic Sense] to [High] or [Middle]

(☞ P.47, P. 49) .

This could potentially be because

the output level for the connected

external devices are too low.

Adjust the output level for the

connected devices.

Voice files are not

recorded in stereo

The connected external microphone

is monaural.

When recording while an external

monaural microphone is connected,

sound will only be recorded by the

L-channel.

[Rec Mode] is set to a monaural

recording mode.

Set [Rec Mode] to the stereo

recording mode (☞ P. 47, P. 49 ) .

[Zoom Mic] is set to the + side. Set [Zoom Mic] to [Off] (☞ P.47, P. 5 0 ) .

Cannot find the

recorded Voice File Wrong folder. Switch to the correct folder

(☞ P. 2 2 t o P. 24).

Noise heard during

playback

The recorder was shaken during

recording. ———

The recorder was placed near a cell

phone or fluorescent lamp while

recording or during playback.

Move the recorder.

Unable to erase the

file

The file is locked. Unlock the file (☞ P. 47, P. 49) .

The file is read-only. Unlock the file or cancel the read-only

setting of the file on the PC.

Unable to erase the

folders

There is a file which cannot be

recognized by the recorder in the

folder.

Connect the recorder to your PC and

erase a folder (☞ P.67, P. 6 9 ) .

Noise is audible

through the recording

monitor

Acoustic feedback is occurring.

When the built-in speaker amps and

the like are connected there is a risk

that audio feedback will occur while

recording. It is recommended that

you use earphones for the recording

monitor.

Conduct adjustments like separating

the earphones from the microphone

further, do not point the microphone

at the earphones, lower the volume on

the recording monitor, and so on.

Unable to set index

marks, tempmarks

The maximum number of marks has

been reached. Erase unnecessary marks (☞ P. 35).

The file is locked. Unlock the file (☞ P. 47, P. 49) .

The file is read-only. Unlock the file or cancel the read-only

setting of the file on the PC.

Troubleshooting

Symptom Probable cause Action

Cannot receive

FM radio signal

For WS-710M only:

The earphones are not plugged into

the EAR jack.

The supplied earphones also function

as an antenna. When using the

recorder as a radio, be sure to plug in

the earphones.

[Output] is set to [Earphones].

To play back using the built-in speaker,

set [Output] to [Speaker] [☞ P.47,

P. 59 ].

Cannot recharge

For WS-710M, WS-700M only:

[Battery] is set to [Alkaline].

When using the supplied rechargeable

battery, set the battery setting to

[Ni-MH]. Also, please avoid using the

battery outside the recommended

temperature range (☞ P.12).

You have not pressed the

OK `/MENU button.

When using the USB connection,

follow the confirmation display and

press the OK `/MENU button.

The PC is unable

to recognize the

recorder

[USB Connect] is set to [AC Adapter]. Set [USB Connect] to [PC] (☞ P. 61).

Accessories (optional)

s Stereo microphone: ME51S

The built-in large-diameter microphone

enables sensitive stereo recording.

s 2 channel microphone (omni-

directional): ME30W

Two ME30 monaural microphones come

in a set with a miniature tripod and a

connection adapter. These are highly

sensitive omni-directional microphones

supported by plug-in power which

are well-suited to recording musical

performances.

s Compact Gun Microphone

(unidirectional): ME31

The directional microphones useful for

recordings such as outdoor recording

of wild birds singing. The metal body

provides a sturdiness to the high rigidity.

s Compact zoom microphone

(unidirectional): ME32

The microphone is integrated with a

tripod, making it suitable for when

you wish to record from a distance,

such as from your table at a meeting or

conference.

s Highly sensitive noise-

cancellation monaural

microphone (unidirectional):

ME52W

This microphone is used to record

sound at a distance while minimizing

surrounding noise.

s Tie clip microphone (omni-

directional): ME15

Small concealing microphone with a

tie-clip.

s Telephone pickup: TP7

Earphone type microphone can be

plugged into your ear while phoning.

The voice or conversation over the phone

can be clearly recorded.

s Ni-MH rechargeable battery and

charger set: BC400 (For Europe)

BC400 comes with an Ni-MH

rechargeable battery charger (BU-400)

and 4 Ni-MH rechargeable batteries

(BR401) as a pack. This charger can quick

charge Olympus AA or AAA Ni- MH

rechargeable batteries.

s Ni-MH rechargeable battery:

BR401

High-efficiency rechargeable long life

batteries.

s USB connecting AC adapter: A514

DC5V AC Adapter for USB connection.

s Connecting cord: KA333

Connecting cord which has stereo

mini-plugs (ø3.5) with resistance at both

ends. Use to connect from the earphone

jack output of the recorder to the

microphone input jack when recording.

Converting plug adapters (PA331/PA231)

which convert to the monaural mini plug

(ø3.5) or monaural mini plug (ø2.5) are

also enclosed.

Accessories exclusive to the Olympus voice recorder can be purchased directly from Online

Shop on our company’s website. Sales of accessories are different according to the country.

Speciﬁ cations

Specifications

General points

4 Recording format:

Linear PCM* (Pulse Code Modulation)

MP3 (MPEG-1 Audio Layer3)

WMA (Windows Media Audio)

* For WS-710M, WS-700M only.

4 Input level:

— 70 dBv

4 Sampling frequency:

Linear PCM format

[44.1 kHz/16 bit] *1 44.1 kHz

MP3 format

[256 kbps] *1 44.1 kHz

[192 kbps] *2 44.1 kHz

[128 kbps] 44.1 kHz

WMA format

[ST XQ] 44.1 kHz

[ST HQ] 44.1 kHz

[ST SP] 22 kHz

[HQ] 44.1 kHz

[SP] 22 kHz

[LP] 8 kHz

*1 For WS-710M, WS-700M only

*2 For WS-600S only

4 Maximum working output:

80 mW (8 Ω speaker)

4 Maximum headphone output:

â 150 mV (according to EN 50332-2)

4 Wide band characteristic

headphone output:

75 mV â (according to EN 50332-2)

4 Recording medium:

Built-in NAND FLASH memory:

WS-710M: 8 GB/WS-700M: 4 GB/

WS-600S: 2 GB

microSD card (For WS-710M, WS-700M only):

512 MB to 16 GB

4 Speaker:

Built-in ø 18 mm round dynamic speaker

MIC

jack:

ø 3.5 mm mini-jack, impedance 2 kΩ

EAR

jack:

ø 3.5 mm mini-jack, impedance 8 Ω or

4 Input power requirement:

Batteries:

AAA battery (LR03) or Olympus Ni-MH

rechargeable battery

External power supply:

USB connecting AC adapter(A514) 5 V

4 External dimensions:

98.5 mm × 40 mm × 11 mm

(without protrusions)

4 Weight:

51 g (including battery)

4 Operating temperature:

0°C - 42°C/ 32°F - 107.6°F

4 Tuning frequency range:

FM radio: 87.50 MHz to 108.00 MHz

Frequency response:

4 During recording mode

(Microphone jack):

Linear PCM format

[44.1 kHz/16 bit] *1 40 Hz to 21 kHz

MP3 format

[256 kbps] *1 40 Hz to 20 kHz

[192 kbps] *2 40 Hz to 19 kHz

[128 kbps] 40 Hz to 17 kHz

Specifications

Speciﬁ cations

WMA format

[ST XQ] 40 Hz to 19 kHz

[ST HQ] 40 Hz to 16 kHz

[ST SP] 40 Hz to 9 kHz

[HQ] 40 Hz to 13 kHz

[SP] 40 Hz to 8 kHz

[LP] 40 Hz to 3 kHz

*1 For WS-710M, WS-700M only

*2 For WS-600S only

4 During recording mode (Built-in

stereo microphone):

70 Hz to 20 kHz (However, when

recording by the MP3 format or the

WMA format, the upper limit value of the

frequency response depends on each

recording mode)

4 During playback mode:

20 Hz to 20 kHz

Guide to battery life

The following values are strictly rough

guides.

4 During recording mode (Built-in

memory):

Recording

mode

Built-in stereo microphones

*1 *2

[44.1 kHz/

16 bit] *3 18 h. 18 h.

[128 kbps] 18 h. 30 min. 18 h. 30 min.

[ST XQ] 19 h. 19 h.

[LP] 25 h. 24 h.

4 During voice file playback mode

(All Playback Mode):

Recording

mode

Built-in speaker

*1 *2

[44.1 kHz/

16 bit] *3 12 h. 12 h.

[128 kbps] 15 h. 15 h.

[ST XQ] 15 h. 15 h.

[LP] 15 h. 15 h.

Recording

mode

Earphone playback

*1 *2

[44.1 kHz/

16 bit] *3 22 h. 21 h.

[128 kbps] 29 h. 27 h.

[ST XQ] 30 h. 28 h.

[LP] 30 h. 28 h.

*1 Alkaline battery

*2 Ni-MH Rechargeble battery

*3 For WS-710M, WS-700M only

4 During FM radio mode (Built-in

memory) (For WS-710M only):

Recorder

status

Earphone playback

*1 *2

During

FM radio

reception

13 h. 30 min. 13 h. 30 min.

During

FM radio

recording

9 h. 9 h.

*1 Alkaline battery

*2 Ni-MH Rechargeble battery

Note

• Battery life is measured by Olympus. It

varies greatly according to the type of

batteries used and the conditions of use.

Speciﬁ cations

Specifications

Guide to recording times

The following values are strictly rough guides.

4 Linear PCM format:

Recording medium Recording mode

[44.1 kHz/16 bit]

Built-in memory WS-710M (8 GB) 12 h. 30 min.

WS-700M (4 GB) 6 h. 10 min.

microSD card*

8 GB 12 h. 15 min.

4 GB 6 h.

2 GB 2 h. 50 min.

4 MP3 format:

Recording medium Recording mode

[256 kbps] [192 kbps] [128 kbps]

Built-in memory

WS-710M (8 GB) 69 h.

----

138 h.

WS-700M (4 GB) 34 h.

----

69 h.

WS-600S (2 GB)

----

22 h. 34 h.

microSD card*

8 GB 68 h.

----

137 h.

4 GB 33 h. 30 min.

----

67 h.

2 GB 16 h. 30 min.

----

33 h.

4 WMA format:

Recording medium

Recording mode

[ST XQ] [ST HQ] [ST SP] [HQ] [SP] [LP]

Built-in

memory

WS-710M (8 GB) 135 h. 270 h. 542 h. 542 h. 1067 h. 2122 h.

WS-700M (4 GB) 67 h. 134 h. 270 h. 270 h. 532 h. 1058 h.

WS-600S (2 GB) 33 h. 67 h. 135 h. 135 h. 266 h. 529 h.

microSD

card*

8 GB 134 h. 268 h. 537 h. 537 h. 1058 h. 2105 h.

4 GB 66 h. 133 h. 267 h. 267 h. 526 h. 1046 h.

2 GB 32 h. 66 h. 132 h. 132 h. 261 h. 520 h.

* For WS-710M, WS-700M only.

Notes

• Available recording time may be shorter if many short recordings are made

(The displayed available recording time and recorded time are approximate indications).

• Variations in the available recording time will arise as there may be di erences in the

available memory depending on the microSD card.

Speciﬁ cations

Specifications

Specifications and design are subject to

change without notice.

Maximum recording time per file

• The maximum capacity for a single  le is

limited to approx. 4 GB for WMA and MP3,

and approx. 2 GB for Linear PCM format

(WAV).

• Regardless of the memory remaining

amount, the longest sound recording time

per  le is restricted to the following value.

Linear PCM format

[44.1 kHz/16 bit]*1 approx. 3 h. 20 min.

MP3 format

[256 kbps] *1 approx. 37 h. 10 min.

[192 kbps] *2 approx. 49 h. 30 min.

[128 kbps] approx. 74 h. 30 min.

WMA format

[ST XQ] approx. 26 h. 40 min.

[ST HQ] approx. 26 h. 40 min.

[ST SP] approx. 53 h. 40 min.

[HQ] approx. 26 h. 40 min.

[SP] approx. 53 h. 40 min.

[LP] approx. 148 h. 40 min.

*1 For WS-710M, WS-700M only

*2 For WS-600S only

It is possible to record

exceeding 2GB:

The recording will continue even if the

volume of a single file exceeds 2 GB in

the linear PCM format recording.

• The  le is saved every 2 GB in

separate  les. It will be treated as

multiple  les when playing back.

• When the recording exceeds 2 GB,

the number of  les in the folder may

exceed 200  les. The 201  le and

later will not be recognized by the

recorder, so check by connecting the

recorder to a PC.

Guide to recordable number of songs

WS-710M: 2,000 songs

WS-700M: 1,000 songs

(At 128 kbps, 4 minutes per song)

Technical assistance and support

Declaration of Conformity:

Model Number: WS-710M/WS-700M/WS-600S

Trade Name: DIGITAL VOICE RECORDER

Responsible Party: OLYMPUS IMAGING AMERICA INC.

Address: 3500 Corporate Parkway, P.O. Box 610, Center Valley, PA

18034-0610, U.S.A.

Telephone Number: 1-888-553-4448

This device Complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

Canadian RFI:

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital

apparatus as set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Cet appareil numérique ne dépasse pas les limites de la Catégorie B pour les émissions

de bruit radio émanant d’appareils numériques, tel que prévu dans les Règlements sur

l’Interférence Radio du Département Canadien des Communications.

The following are contact information for technical support for Olympus recorders and

software only.

s Technical Hotline Number in the U.S. and Canada

1-888-553-4448

s User Support E-mail address in the U.S. and Canada

distec@olympus.com

s Technical Hotline Number in Europe

Toll free number: 00800 67 10 83 00

available for Austria, Belgium, Denmark, Finland, France, Germany, Italy, Luxemburg,

Netherlands, Norway, Portugal, Spain, Sweden, Switzerland, United Kingdom

Charged numbers for the Rest of Europe

+ 49 180 567 1083

+ 49 40 23773 4899

s User Support E-mail address in Europe

dss.support@olympus-europa.com

Technical assistance and support

OLYMPUS IMAGING CORP.

Shinjuku Monolith, 3-1 Nishi-Shinjuku 2-chome, Shinjyuku-ku, Tokyo 163-0914, Japan. Tel. +81 (0)3-3340-2111

http://www.olympus.com

OLYMPUS IMAGING AMERICA INC.

3500 Corporate Parkway, P.O. Box 610, Center Valley, PA 18034-0610, U.S.A. Tel. 1-888-553-4448

http://www.olympusamerica.com

EN-BD2873-01

AP1006

Olympus Ws 600S Instructions 710M_WS 700M_WS 600S_Instructions_EN

Ws-700M-Instructions ws-700m-instructions

Ws-710M-Instructions ws-710m-instructions

Power Macintosh 8100 Series WS-710M_WS-700M_WS-600S_Instructions_EN

700M to the manual 6213bf7f-881a-4082-b2dd-279d4035fbae

Navigation menu

Versions of this User Manual:

Views

Navigation