Omega Research and Development 701 701 User Manual A5FEADB6B6C7AF75A643A64C

Download:
Mirror Download [FCC.gov]
Document ID	1174421
Application ID	vIoxui3I7FHcmtuNLn01dg==
Document Description	manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	497.2kB (6214939 bits)
Date Submitted	2009-09-24 00:00:00
Date Available	2009-09-28 00:00:00
Creation Date	2009-09-24 18:04:49
Producing Software	Acrobat Distiller 8.0.0 (Windows)
Document Lastmod	2009-09-24 18:06:33
Document Title
Document Creator	PScript5.dll Version 5.2.2
Document Author:	gloria_huang

‘ 17mm Cmnmunluflnm Commas-ton (FCC) sum-mt
1511
Yoummfimedmnhmmumnfiflnmlmmuflymndbyfiepmmpmbhfmmflhmwfldmid
mum'lmfllmizyvaalhhequhmmt.
15.1050»
m.quip-shamanmmmmwmmmuhnau-nfiwmmmmm15mm
mummmlhfinmduipsdmmdemmlhhpmfimmhmfidmhnmfimfifl
mmxwmmmu.mmmmmefiqmmmwmwmmmm
mfimmhmwm.mymuhmflmflummnfincflmmhlfimnflmmilmgmm
mam-mmmmmmuumnmmfimmdmmmmmmmmm
flammwidmhmmwthuEMmhmfi-wwdmwwm
mhufi-mbymwmofmfnuuwium:
-Rwfimurdnmfi=meivingmn=mn
{unluuflelepnnfimbetwemhqnipmmtmdmmim
Wmmmimmmm-cmmfimmmmwmmnmeimim
mmmmummmwmmmhw.
“whit
nmmmnmpmymmmmmmmmmmnmflm
5—H
lnstalllng & Programming The ECHO System
Overview OtThE Controller. . . . ..
The ECHO TOUCH Status Sct‘een ...
Using The ECHO-TOUCH Controller
First time use Rt controller setup
Language Selection... . ..
Controlling your system
Mutll- Car Operation & Vehicle Profiles.
Multicar operation...
Programming the vehlcle name
Selecting cart or new
Selecting the vehicle image
@ Programming The Controller Options
Selecting button heep, melody. zit vibrate modes . . . . . . . .
Clock & time options overview
Setting the time at date .
Setting the time format (12 m 24 Hour)
Setting the alarm clock
Demo mod
LCD screen p y op
Setting the screen eh time
Setting the screen onghtness..... . .
other Cehtmller Functions
tnewing the alarm triggerhistory
Power off mode .
. Parking timer {it re
wwmmmmwummmmbsmwummqmmmmbw
at»
QIE
The controller can be turned otfcompletely to save battery life while traveling
or out of range of the vehicle. To turn the controller off
1) Access SCREEN 5 (see page 17)
2) Press the POWER OFF lcon (see page 17)
3) You will see a warning screen asking you to confirm.
4) Press the FOLDER icon to confirm.
To turn the controller back on. press the HOME button.
The controller has 2 convenient timer functions. The PARKING TlMER tells @
you how long you've been parked in case you are at a parking meter or other
parking areas with time restrictions. The REMOTE START TIMER tells you how
long your engine has been running in remote start mode. This is a good indica-
tor to judge how long you have left in the remote start run cycle.
PARKING TIMER: Press LOCK twice within 5 seconds. When the controller
receives both LOCK confirmations, it Will start the timer.
REMOTE START TIMER: This turns on every time you remote Start.
Note: Pressing the home screen during either timer mode will show the
time clock for 2 seconds before returning to the timer.
Programming The Controller Options (cont’d)
SETTING THE SCREEN ON TIME
1) Access SCREEN 5 (see page 17)
2) Press the SCREEN ON TIME icon (see page 17)
3) Choose the 5, 10. or 15 second preset and, if desired, adjust with the +/» 1
second increment icons.
4) Press the FOLDER icon to save the setting
1) Access SCREEN 5 (see page 17)
2) Press the SCREEN BRlGHTNESS icon (see page 17)
3) Choose any ofthe 1-5 brightness settings to your liking.
4) Press the FOLDER icon to save the setting
Other Controller Fun
ns
The controller will store recent alarm trigger events in a log that displays the
date & time of the trigger as well as which zone was triggered. The history is
cleared when you turn on the vehicle's ignition To view the trigger history:
1) Access SCREEN 5 (see page 17)
2) Press the TRIGGER HISTORY icon (see page 17)
3) Press the HOME button to exit
«is
69
] lnstal “ng & Program ' g The ECHO System
The ECHO-TOUCH communicates with a window-mounted base unit which
is plugged directly into the host security system module. The window-mount
antenna should be mounted directly to the interior glass by utilizing the attached
adhesive pad (clean the glass before adhering) for the best performance The
receiver/transmitter also contains alternative Status Lights and a Valet Switch.
these may be used, or the original items maybe retained.
NOTE: It is recommended to fully charge the controller before use.
Step 1 Echo Base Step 2 Plug in and route the Echo
Locate & Tmnsmmer, transmitter/receiver uhitwinng harness.
Remove the \ Remiver Unit Using the adhesive tape, mount the Echo
transmitter/receiver onto an interior glass
security systems
(carefully clean the surface).
Echoportjumper \
connectolnthasa \
Red wire imp) \ Host Omega Security
System Control
\ ‘ Module
\ fl
\ LED and
Valet Switch
(configurations vary) Q \\
plugs.
step a
original 1-way transmitters into the security system
\ (see the systems guide Iorinstruolions).
ngmm the Echo cnnl‘roIIer and the
ii in I I «l» _i if
_ Program ' gThe Controller Options (cont‘d)
EEMSLMQIZE
”Antenna: Sends commands to the
system and receives confirmations for Demo mode will show you a demonstration moVie ofall the controllers avail—
Z-Wa‘! functions able functions along with confirmation animations and voice alerts. To view
demo mode, use the following steps.
1) Access SCREEN 4 (see page 15).
2) Touch Screen LCD: Displays all
controllerfunction buttons as well as the ((( $559 ))) 2) Press the DEMO icon (pictured on page 15).
gm“ Ofym" Sys‘em' 4 l— . LCD SCREEN DISPLAY OPTIONS OVERVIEW
i DISAIM The LCD screen has two adjustable parameters, SCREEN ON TIME and
3) “me Bum“ Th‘s wakes “p the SCREEN BRIGHTNESS. Both settings have an effect on battery life. So, it is
@ wmmuerme" me scree” '5 °ff and ‘ recommended to use the lowest Sellin s our are comfortable With These set— @
returns you back to the status screen. . "’ g y '
tings are accessed from SCREEN 5. To access SCREEN 5. press the home
button, tap the screen‘ and press the DOWN ARROW 4 times.
SCREEN 5
4) Charger Port: This is where you plug
in the charger to recharge the control?
Ier's battery.
Screen Brightness Screen ON Time
5) Keychain Loop: Use this loop to
attach the controller to your keychaini
Power Off
Trigger History See pg_ 19
See pg. 18
i i 6i9 ii’
Prog mming The Controller 0p ns (con
4) Now, set the time using the +/- increment icons. You can increase or
decrease the minute or hour by increments of 5 or ‘l.
~Use the GREEN UP ARROW to change from hours to minutes.
5) Press the FOLDER icon to save the date & time.
SETTING THE TIME FORMAT 12 OR 24 HOUR)
1) Access SCREEN 4 (see page 15)
2) Press the TIME FORMAT icon (pictured on page 15) to toggle between 12 &
24 hour formats.
SETTING THE AQRH CLOCK
1) Access SCREEN 4 (see page 15)
2) Press the ALARM CLOCK icon (pictured on page 15) to access the alarm
clock screen.
3) Use the number pad screen to set the desired alarm time exactly in the same
method used to set the clock time.
4) Press the FOLDER icon to save the alarm clock setting.
Note: To turn the alarm clock off, set the alarm time to midnight
(12:00AM-12HR or 0:00-24HR)
els
e ECHO UCH Status Screen
Alarm Trigger Indicator Battery Level Indicatofi
In Range Indicator mock/Tuner
DISARM
Current System State
Vehicle Image
(Selectable)
Vehicle Name
FAWMM: (Programmable)
‘ 4,- A.
Lock/Unlock Indicator , (x \
Alarm Clock ON icon
Vibration Mode lndicato CH2/cH3 |ndicator
MelodyNoice Indicator
Remote Start ONIOFF Indicator
‘The controller is powered by a bu -in rechargeable battery. When the battery
level indicator shows a low battery, plug the supplied USB cable into the control-
ler, then connect the othe end to the supplied Ac adapter or your computer’s USB
port. While charging, the indicator will increment from empty to full. When full, the
indicator will show a plug icon.
«is
_lL
at»
Before the controller will function properly, it must be matched to the type of
system you have. The ECHO—TOUCH is compatible with many different sys—
tems so please follow these steps to configure it foryours: SCREEN 6
1) Press the HOME button to turn on the controller. —
2) Tap the screen to see the control icons
3) Press the UPARROW once until you see SCREEN
6 (pictured to the right).
4) Press the SYSTEM TYPE button
5) Select one of the following options:
Alarm System Only Use this setting for systems with-
out a built-in remote start option.
GEN 1 Remote Start: Use this setting if you press
LOCK+UNLOCK to activate your remote starter.
GEN 2 Remote Start: Use this setting it you press the
“m" button or a single dedicated "START" button to
activate your remote starter.
6) Press the “FOLDER" button to save the setting.
LANGUAGESELEQLQN
Tanitfi “m: .»
IURII SVSTEH ONLY
594 l REMOVE START
on 2 Ream: sum
Go to SCREEN 6 and choose: Amencan flag = ENGLISH \
Spanish flag : SPANISH
_l ‘7
Program ' g The Controller Options (cont‘d)
The controller's clock has 3 programmable options. You can set the time
& date. select 12 or 24 hourformat, and program the built-in alarm clock. To
program these options. you must first access SCREEN 4 by pressing the home
button, tapping the screen. and pressing the DOWN ARROW 3 times.
SCREEN 4
Clock Format
Set ‘I’lmeIDats 12/24 Hour @
Demo Mode
Set Alarm Clock See pg, 17
1) Access SCREEN 4 and press the “SET TIME/DATE" icon.
2) Use the number pad screen to set the date. Format: MMDDYY
~ BLUE arrow 2 Backspace
3) Once the date is correct, press the GREEN arrow to save.
7‘ l élb
rogramm g The Controller 0p ns
The controller has 3 different type of alert modes. BU'I'I'ON BEEP configures
the controller to beep as a confirmation when you press any icon on the screen.
The MELODY and VIBRATE settings configure how you are alerted anytime
the controller receives a confirmation or alert from the vehicle's system. MELO»
DY turns onlotf all audible alerts including voice alerts VIBRATE mode turns on!
off vibration alert‘ To change these options:
1)Access SCREEN 3 (see page 12) and press the alert icon (pictured below)
2) Change the alert settings as desired according to the diagram below
@ 3) Press the folder icon to save the setting
0 Alert Icon ' 0 Alert Settings
Vibrate ON indicator
Melody ON Indicator
Button Beep ON
Button Beep OFF
Melody ON/OFF
Vibrate ONIOFF
Save Settings
Using The ECHO CH Controller (con
SCREEN 1 : To access, press the HOME button and tap the screen.
LOCK: Press and release the “LOCK" icon
- YOUR SVSTEM SHOULD REACT THE SAME AS
WITH YOUR ORiGiNAL CONTROLLER
_ - UPON RECEIViNG CONFiRMATiON FROM YOUR
(fl SYSTEM, IT WILL PLAY THE LOCK/ARM AN iMATi ON
AND voncs ALERT.
F * NOTE: PRESSING LOCKTWICE m 5 sscouos
Q STARTS THE PARKlNG TIMER. THE CLOCK wu.|.
CHANGE TO D:DDAND$TART couwrme m ler @
was a. HouRst
UNLOCK: Press and release the “UNLOCK" icon
- YOUR SVSTEM SHOULD REAcr THE 9“le As
a f ,7 \ VViTH YOUR ORIGiNAL CONTROLLER
A - UPON RECEiViNG CONFiRMATION FROMYOUR
SYSTEM, 1T Wi LL PLAY THE UNLOCK/DISARM ANiMA»
Ti ON AND VOi CE ALERT.
_| | —:|:EEI @ I I-
'ng The ECHO-T0 H Controller (cont'd) Mu‘t '
ar Operation & Vehicle
ofiles (cont‘d)
TRUNK RELEASE I CHANNELZ: Press the and hold the "TRUNK" icon for 3 W
seconds Once the vehicle names have been programmed for both vehicle profiles. you
can simply switch between the two as needed To do so:
. vouR SYSTEM SHOULD REACT-[HE SAMEAS ”Tap the desired vehicle‘s icon (CARI or CAR2) on SCREEN 3 as if you are
WITH you R ORIGINAL CONTROLLER, gomg to cha nge the na me.
- UPON RECEIVING CONFIRMATION FROM YOUR 2}Theh\ press the GREEN arrow CAR1 CARZ
SYSTEM, IT WILL RLAV THE TRUNK RELEASE ANIMA— icon to select that profile
TION ANDVOICE ALERT ‘
SELECTING THE VEHICLE IMAGE
@ Vou can select a dillereht vehicle image for each vehicle profile if desired. @
“A The controller is preloaded with 3 different vehicle images. a CAR. TRUCK. and
3 Press and release the * "30" US“ SUVI To change the image. follow these steps:
ing the same method as with the original controller (ie., 1 or 2 presses, etc).
. your; SYSTEM SHOULD REACT THE SAME As 1} Make sure you are already in the desired vehicle prolile
WITH YOUR ORIGINAL CONTROLLER. (CARt or CAR2).
- UPON RECEIVING CONFIRMATION FROM YOUR
SYSTEM. ITWILL PLAY THE REMOTE START ANIMA— ZI Access SCREEN 3 . . 4
“ON, AND FL,“ THE REMQTE START ON/OFF VD‘CE 3) Press the VEHICLE IMAGE icon (pictured to the right) to
ALERT view the image select screen
- THE CLOCK WILL CHANGE TO 0.00 TO START THE 4) Press the GREEN UP ARROW to change the image
REMOTE START TIMER. IT WILL TIME HOW LONG
THE ENGINE RUNS W M‘NUTES & HOURSL 5) Press the FOLDER lcon to save your selectloh,
_| | —ZEED @ t ‘_
' ar Operation 8. Va ' Ie Profiles 7 Using The ECHO-TOUCH Controller (cont‘d)
Wm CHANNEL 3 (ALARM ONL‘II: Press and release the “*" icon using the same
The TOUCH controller can operate up to? different systems. When control— method 35 wnh the original controller (i.e, 1 0T? presses, 910)
ling 2 systems, the controller will receive all status updates on the currently
selected vehicle profile and will receive only trigger alerts forthe 2nd vehicle.
You can swflch from one car to the other at anytime as well as choose a unique
image and name for each vehicle. Use the following steps to change vehicle
profiles as well as select the vehicle image and name.
PROGRAMMING THE VEHICLE NAME
1) Access SCREEN 3: press the HOME button, laplhe screen, press the down
@ arrow twice
- YOUR SYSTEM SHOULD REALTI' THE SAME AS
WtTH YOUR ORIG‘NAL CONTROLLER
- UPON RECEMNG CONHRMATIDN FROM VOUR
SYSTEM, tT WWLL PLAYTHE CHANNEL 3 ANIMATION
AND VO‘CE ALERT.
2) Press the "CARt" icon (pictured m the left), You will SCREEN 2: To access. press the HOME button, tap the screen. press the down @
then see the “CAR 1 NAME" screen. arrow once.
3) Program the name you desire (up to 16 characters) W5 Press and release "19 “CH? i130"
BLUE arrow: Backspace using the same method aswith the original controller (i e . 1 or2 presses. etc).
YELLOW arrow: Scrolls through numbers,
letters, and symbol screens
4) Press the GREEN arrow to save the name.
- vouR SVSTEM SHOULD REACT THE SAME As
VViTH YOUR ORIG‘NAL CONTROLLER
- UPON RECEMNG CONFtRMATIDN FROMYOUR
SYSTEM, n WiLL PLAYTHE CHANNEL 3 ANIMATION
NOTE: Programming the name for CARZ is thesame CHS AUX»! AND VO\CE ALERT-
procedure, except you will need to press the CARZ
12 '. ' icon in step 2. n
_| | —ZEED 6
ng The ECHO T CH Controller (cont d)
CHANNEL4 (IF EQUIPPEDI: Press and release the “CH4” icon using the
same method as with your original controller (ie., 1 or2 presses, etc)‘
- VOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER.
VJ NOTE: THE “CH3” ICON WILL NOT BE VISIBLE
WHEN THE CONTROLLER IS SET FOR “ALARM
ONLV" UNDER THE “SVSTEM TYPE" SETTING.
CHANNEL 5 {IF EQUIPPEDI: Press and release the “CH5" icon using the
same method as with your original controller (ie. 1 or2 presses. etc)
- VOUR SYSTEM SHOULD REACT THE SAME AS
WITH YOUR ORIGINAL CONTROLLER
NOTE: THE “CH!" ICON WILL NOT BE VISIBLE
WHEN THE CONTROLLER IS SET FOR “ALARM
ONLV" UNDER THE “SYSTEM TYPE" SETTING.
g The ECH H Controller (cont d)
W: Press and release the “AUX4” icon using the same
method as wnh your original controller (ie. 1 or2 presses. elc)T
- AUX4 IS AVIRTUAL CHANNEL OUTPUT ON THE
SYSTEM‘S DATA FORT. IF USED, 41 WAS CONFIGA
URED av YOUR IN STALLER,
' YOUR SYSTEM SHOULD REACT THE fiME AS
WITH VOUR ORIGINAL CONTROLLER,
A \-— NOTE: THE “CHJ” ICON WILL NOT BE VISIBLE
‘ WHEN THE CONTROLLER IS SET FOR “ALARM
ON LY’ UNDER THE “SYSTEM TYPE" SETFIN G.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.0-c316 44.253921, Sun Oct 01 2006 17:14:39
Producer                        : Acrobat Distiller 8.0.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2.2
Modify Date                     : 2009:09:24 18:06:33+08:00
Create Date                     : 2009:09:24 18:04:49+08:00
Metadata Date                   : 2009:09:24 18:06:33+08:00
Format                          : application/pdf
Title                           : 
Creator                         : gloria_huang
Document ID                     : uuid:6ac70bd7-d1a8-49a9-bd75-6849daf115e9
Instance ID                     : uuid:d5c6f1f2-4c1b-4af6-9a9c-5ddbab7a6858
Page Count                      : 10
Author                          : gloria_huang

EXIF Metadata provided by EXIF.tools