Omega Research and Development K9310 Security Device Transmitter User Manual users manual

Download:
Mirror Download [FCC.gov]
Document ID	112475
Application ID	/NTzBXueGGe3LRYnJxTCIw==
Document Description	users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	179.03kB (2237906 bits)
Date Submitted	2000-08-09 00:00:00
Date Available	2000-08-09 00:00:00
Creation Date	2000-07-18 11:37:24
Producing Software	Photoshop PDF Plug-in 1.0
Document Lastmod	2000-07-18 11:38:05
Document Title	users manual
Document Creator	Photoshop PDF Plug-in 1.0

J 991
MM
OMEGA RESEARCH &
DEVELOPMENT, INCA
FCCID:L2MK9310 Owner's
OB¢412 3 *
EXH %ITI#:LO ‘/ MOHUCH
MODEL: K9-Mundial
cums '
«55a stww s nmmwsm 2mm
introduction
Security System Armed & Activated .
Last Door Arming ......
Transmitter Functions
Arming/Disarming The Aiarm
Panic Mode
Auxiliary Channel
Easy Valet
Emergency Override
LED Status Indicator Light
Anti Car-Jacking Mode
Sensor Zone .....
Expianation Oi Programmable Features
Features Programming Mode ..
List Of Programmabie Features
Transmitter Programming Mode
Remote Transmitter Reference Guide
__.¥,
7 iNTRobucno
Congratulations on your purchase of this vehicle security system. In learning to
operate your security system, please become familiar with the following three prin-
cipal components: the Remote Transmitter, the Red LED Status Indicator Light,
and the Valet/Override Switch,
The Remote Transmitter: Each security system comes with two preelearned
transmitters, but can learn up to 4 different transmitters. Every transmitter has its own
unique, invisible oode. Thus, no other transmitter is coded the same as yours. In fact,
no one, including the factory, can program another transmitter exactly like yours
because the code is built inside the transmitter‘s master microprocessor and cannot
be seen or duplicated. The transmitter has two buttons: one large button and a
smaller button. Please refer to pages ” 6-9 fortransmitter operating instructions.
The Valet/Override Swi h: This switch can be used to turn ”Off" the security
portion of the system, including the programmable Automatic Last Door Arming
feature. and enter the alarm into Valet mode. The Valet/Override Switch can also be
used in conjunction with the vehicle‘s ignition key to periorm an emergency disarm
oi the security system in the event the transmitter becomes inoperable.
The Red LED Indicator Light: The LED indicates the status of the alarm and serves
as a visual deterrent to break-ins and thefl. Refer to pages ‘12-13.
The alarm may be "Armed” by any 01 two methods. The first method involves the use
of a remote transmitterto ”Actively" arm the system. provided the ignition switch is
"otl" and the system is Lot in Valet Mode. The second method is a programmable
leature called “Last Door Arming“ in which the alarm will self or”Passiver" arm. When
the alarm enters the armed state the siren will chirp once, the parking-lights will flash
once, the door locks will lock (it connected), the starter interrupt will engage (if
connected), and the LED Status Light will begin flashing to contirm that the system
is armed. Three seconds after the siren chirps, the system will be in a fully armed
state and will trigger if an intrusion attempt is detected.
An al rm tri er con ists f tollowin :
t) The electronic siren/horn will start sounding,
2) The exterior parking—lights will flash.
An alarm trigger has a 30/60 second duration unless the system is disarmed using
a remote transmitter or the Valet lOverride switch, It all protected zones are secure
at the end of the trigger cycle, the alarm will stop and rearm automatically ready to
detect another entry attempt. If a protected zone is still open at the end of the trigger
cycle, the system will reactivate for up to 3 additional trigger cycles, After the fourth
trigger cycle the alarm will automatically rearm and bypass the open zone until that
zone is closed.
LAST noon ARMING: (aka: SELF on PASSIVE Ammo)“
Automatic "Last Door Arming“ is a programmable feature which allows the alarm
to arm itself and lockthe doors. If “On“. this convenient feature offers a high level
of security since the user does not need to remember to turn the alarm "On“each
lime the vehicle is exited. Additionally the “Last Door Arming" feature may entitle
the owner to an insurance discount.
TRANSMITTER FUNCTIONS:
The Alarm comes with two 2-button remote transmitters. Please (amiliarize your-
self with the buttons and operations 01 the transmitters which are explained in the
lollowing pages.
Last Door Arming Process:
1) The LED indicator will begin flashing rapidly when the vehicle's ignition has
been turned “Off“ and the last door closed, to confirm that the last door
arming countdown has begun.
2) 30 seconds later the alarm will arm & lock the doors (it Programed). The LED
indicator Will begin flashing slowly to confirm that the alarm is armed.
Note: The alarm can not self-arm while a protected point is open. it a vehicle door
is opened during the arming countdown, the countdown will stop and reset when
the last door is closed again.
ARMiNG
To Arm/Disarm the alarm: Press {Release the large button.
WWW ffi \
‘4 m, «v, “mu-mm
. for...”
Ugon Arming: - The siren will emit one chirp.
- The parking-lights will flash once.
~ The doors will lock. (ll connected)
0 The starter interrupt will engage.
- The LED status indicator will begin to flash slowly.
Upon Disarm: 0 The siren will emil 2 chirps. (4 Chirps it alarm has triggered)
' The parking-lights will flash twice. (4x it alarm has triggered)
~ The doors will unlock. (It connected)
- The starter interrupt will disengage. *
0 The LED status indicator will turn "Off", or begin flashing rapidly
depending if the Passive/Self arming feature is programmed.
Note: It a protected zone is open when alarm is actively armed using the
transmitter, the alarm will bypass the open zone until that zone is closed.
To activate Panic: Press & Hold the Large button for 3 seconds.
To deactivate Panic: Press & Release the Large button.
flaw
—m\
/ O
wmwmwm
mmm
- The siren/horn will sound.
- The exterior parkingvlights will llash.
. The vehicle's doors will lock.
Upon activating Panic:
-The Panic cycle has a (SO-second duration unless it is deactivated using a
transmitter. At the end at the cycle, the alarm will reset and enter into the
Armed slate.
L:
To activate the au 1 I
Press & Hold the Small button for 3 seconds.
nd‘ . A0,
Muismtmwvmmurs
The auxiliary output may be used to operate a trunk release. car-start module,
or awindow roll-up interlace. Please see your Omega dealer for details 8.
available options.
Notes:
- The Alarm is programecl to Disarm when the auxiliary channel is activated.
' The auxiliary channel cannot be activated if the vehicle's ignition is “On“.
in the Valet mode all of the Alarm's security features have been turned “Off‘ and only
the convenience features such as keyless entry and the auxiliary channel can be
operated. Valet mode is designed for situations in which it is not convenient for the
security portion of the alarm to be operational. For example during extended
stopovers tor vehicle servicing, maintenance, valet parking, washing, etc.
To enter "Valet" mode: (With the alarm Disarmed)
While the Alarm is Disarmed. Press & Hold the Valet Button tor 3 seconds with
the vehicle‘s ignltlon "On" or "Off".
-The LED will light solid Red to confirm that the Alarm is in Valet mode.
To ex Valet” mode:
Press «St Release the Valet Button with the vehicle‘s ignition “On" or "Off".
-The LED will turn all to confirm that the Alarm has exited Valet mode.
EMERGENCY
In the event that the "remote transmitter is lost, damaged, 0 batteries have
become exhausted. the Valet/Override Switch & your vehicle’s ignition key may be
used to Disarm the system:
To Disarm The Securityivstem Without The Remote Transmitter:
Step 1. With the system in the armed condition, enterthe vehicle via the driver's
door (be aware that the alarm will trigger the instant the door is opened).
Step 2. Using your key, turn the vehicle's ignition to the "On“ position.
Step 3. Within 10 seconds, Press the Valet/Override Switch.
-The alarm will instantly disarm.
LED STATUS INDCAITOR LIGHT:
The Red LED Status Indicator Light visually confirms the status of the Alarm and
provides a high level of visual deterrence. The Red LED Status Indicator Light is
normally mounted in a location where it can be easily seen by the driver, as well as
from outside the vehicle.
Secum' System Status: The primary function of the Red LED Status Indicator Light
is to indicate the status ol the security system:
Off : The system is disarmed and not performing any automatic functions.
On Constant = The system is in the Valet Mode,
Flashing Slow : The system is fully Armed.
Flashing Fast : The Last Door Arming or the Rearm process is in progress.
Automatic Tran itter Verification: For the first 10 seconds after the vehicle‘s
Ignition is turned "On“, the LED Indicator Light will flash a number 01 times equal to
the number of remote transmitters which are programmed in the alarm's memory
and can operate the security system.
1 Flash /pause = 1 remote transmitter is programmed to operate the system.
2 Flashes [pause : 2 remote transmitters are programmed to operate the system,
3 Flashes /pause : 3 remote transmitters are programmed to operate the system.
4 Flashes /pause : 4 remote transmitters are programmed to operate the system.
Alarm Trigger Rm“ Memom: If the Alarm is triggered while Armed. the Red LED
Status Indicator Light will stop flashing slowly and begin to flash & pause to indicate
which protected zone was violated, causing the trigger. The LED will flash & pause
to indicate which zone was violated until the vehicle‘s ignition is turned "On“. The
alarm's trigger recall memory circuit can store up to four consecutive zone violations.
if there has been multiple zone violations, the LED will replay them in the order in
which they occurred. ‘
1 Flash /Pause = System was triggered through the current sensing circuit.
2 Flashes lPause = System was triggered through the sensor circuit.
3 Flashes IPause ystem was triggered through the hood or trunk circuit.
4 Flashes lPause = System was triggered through the door circuit.
Note: Turning”On" the vehicle's ignition will clear the Alarm's trigger recall memory.
z,-
The Alarm is equipped with a programmable tri-Ievel Anti CaraJacking system. The
anti car-jacking system may be activated through the ignition, a combination of the
ignition and an open door, or the remote transmitter
‘1: Anti Car—Jacking activated using the remote transmitter:
If programmable feature’1 3 is "On", the Anti Car-Jacking sequence may be activated
using the remote transmitter any time the ignition is "On“.
To remotely activate the Anti Cardacking process: Press & Hold both buttons on
the remote transmitter for 4 seconds with the vehicle‘s ignition "On".
‘2: Anti Csr—Jacking activated through the ignition and a door:
It programmable feature l14 is "On“, the system will initiate the Anti Car-Jacking
process every time a vehicle door is opened and closed while the ignition is “On".
“3: Anti Car-Jacking activated through the vehicle's ig “tion:
If programmable feature ”15 is "On“, the system will initiate the Anti Car-Jacking
process every time the vehicle's ignition is turned “On".
Once the Anti Car-Jacking process has begun, the user has 80 seconds to
press the Valet/Override button in order to cancel the process. If not cancelled,
at 53 seconds the siren will begin to chirp for 7 seconds to alert the user that the
system is about to enter into an alarm condition.
If the Anti Car-Jacking process is not cancelled before the 60—second countdown
expires, the system will enter an alarm condition. In an alarm condition the siren/
horn will sound, the parking lights will flash, and the stater interrupt will engage.
The system will M respond to the remote transmitters and will M reset
automatically.
WWW—"MW:
Step 1: Turning the vehicles's ignition “011".
Step 2: Turning the vehicle‘s ignition "On".
Step 3: Pressing the Valet/Override button,
V N,"
Sensors: This security system is equipped with a plug-in portlor an optional Sensor
to increase the effectiveness of the system.
The comprehensive line of optional sensors offered is comprised of impact sensors,
glass tampering sensors, and microwave/radar sensors which can detect motion
inside and outside the vehicle. Your Omega dealer can provide details on the
complete line of sensors and help determine which sensor or sensors are best
suited for your needs. Currently many sensors feature dual zone capability, which
take advantage of the security system‘s prewam circuit explained below.
Prewarning Detection circuit: This circuit requires connection to an optional dual
zone detection device. When the sensor‘s prewam zone is triggered the security
system will respond by chirping the siren for 2 seconds.
‘EXPLANATION OF PROGRAMMABLE FEATURES:
The Alarm comes equipped with 16 programmable features which allow the
system to be customized to each particular application.
Detault Factom Setting
1. Current Sensing: (-On /Off)
2. Current Sensing Activation Delay: (3 Seconds he Minutes) _ _
. Allows option of a longer activation delay for use in vehicles wtth cooling tans
which stay on after the ignition has been turned off.
3. Automatic “Last Door” Arming: (-On /Off) _ .
- Allows the Alarm to automatically Arm itseli 30 seconds after the vehicles
ignition is turned "Off" and the last door is closed.
4. Doors Lock Wlth “Last Door’I Arming: (On I-Ott) _ _
- Allows the Alarm to lock the vehicle‘s doors when it automatrcallyfrms itself.
5. Automatic Rearm: (-0n loft) _ _
- Allows the Alarm to automatically Rearm itself 90 seconds after it is
Disarmed using the remote transmitter.
6. Doors Lock With Automatic Ftearm: (On /'Off)
— Allows the alarm to lock the vehicle's doors when it automatically Rearms
itseli.
7. Constant Siren Output Or Pulsed Horn Honk Output: ( Siren/Horn)
— Allows the selection of a constant output to operate the siren or a pulsed
output to operate the vehicle‘s horn.
8. ignition Controlled Door Lock/Unlock: (‘On/Off)
— Allows the alarm to lock/unlock the vehicle‘s doors when the ignition is turned
..OnH/Hoflu_
9. Alarm Condition Cycle Duration: 030/60 Seconds)
» Aliows the option of a 30 or 60 second alarm condition cycle.
10. Single Or Double Unlock Pulse: (-Single / Double)
—A|Iows the option of a single or double unlock pulse upon desarming the Alarm.
11. Open Door By-Pass Alert: (On /-Ofl)
— Allows the Alarm to emit 3 chirps to warn the user if there is an open door
zone when being Armed using the remote transmitter.
12. Aux Channel Disarms Alarm Or Engages Stan Mode: (-Disarms / Start Mode)
- Allows the option of having the auxiliary channel disarm the Alarm when
activated or engaging the Remote Start mode. In the Remote Start mode the
alarm will bypass the current sense and sensor zones if the auxiliary channel
is activated while the Alarm is armed. This will allow a remote start module to
start the vehicle without triggering the Alarm. The door and trunk zones remain
activated and if violated will trigger the Alarm and turn the vehicle engine off.
13, Remote Control Activated Anti Car-Jacking: (Onl-Off)
- Refer to page ”14.
14. Door & Ignition Activated Anti Car-Jacking: (ON-Off)
- Refer to page ”14.
15. Ignition Activated Anti Car~Jacking: (OnI-Off)
- Refer to page ”14.
16. Chirp Confirmation: (-On/Off)
— Allows the permanent activation/deactivation 01 the Alarm's siren/horn chirp
confirmation when performing functions (i.e.: Arm/Disarm chirp contirmations).
FEATURES PROGRAMMING MODE
The Alarm comes equipped with 16 programmable features. These features are
explained in pages “17-19.
To Enter Features Prog mm 9 Mode
1) Turn the vehicle's lgn n “On" then "Off".
2) Within 7 seconds of turning "Off" the ignition Press & Release the Valet
button 5 times.
- 7779 siren/horn will emit a long chirp confirming entry to the programming mode.
Programmin
3) Wi in 7 seconds of entering the programming mode, Press the Valet
button a number 01 times equal to the number of the feature to be
programmed.
» The siren/horn will emit a number of ohirps equal to the feature selected.
Errample: To program feature “3, Press the Valet button 3 times. The siren/horn
wrll chirp 3 times to confirm the feature has been selected
20
4) After selecting the feature to be programmes}, Press-the button on the
remote transmitter that corresponds to the desired setting.
- Press the Large button, the siren/horn will chirp once.
- Press the Small button, the siren/horn will chirp twrce.
NOTE: The selected feature can be toggled “On" / ”Off” by pressing the remote
transmitters buttons.
5) To program another feature repeat steps ”3-4.
- To program another feature it is necessary to Press the Valet button a number
of times equal to the number of the leature to be programed,
Example: To program feature “1. Press the Valet button 1 time. The siren/horn
wrll chirp 1 time to confirm the feature has been selected.
6) The Alarm will automatically exit programming mode it 7 sect???) go
by without programming input or if the vehlcle's ignition is turne n .
— The siren/horn will emit a long chirp to confirm exit from the programming
mode.
LIST OF PROGRAMMABLE FEATURES: I
These leatures are explained on pages ”17—19.
The Features programming mode is explained on pages ”20-21.
1. M: (-On /Off) ,
- ON = Press the Large button, the siren/horn will chirp once.
- OFF = Press the Small button, the siren/horn wiII chirp twice.
2. Current Sensing Activation Delay: (3 Seconds /-3 Minutes)
, 3 SECONDS = Press the Large button, the siren/horn will chirp once.
— 3 MlNUTES = Press the Small button, the siren/horn will chirp twice.
3. Automatic ”Last Door" Arming: («On /Ofl)
— ON — Press the Large button, the siren/horn will chirp-once
— OFF = Press the Small button, the siren/horn will chirp twice.
4. Doors Lock With “Last Door“ Arming: (On l-Off)
- ON : Press the Large button, the siren/horn will chirp once.
- OFF : Press the Small button, the siren/horn will chirp twice.
5. Automatic Ftearm: (-On loft)
» 0 Press the Large button, the siren/horn will chirp once.
A OFF _ Press the Small button, the siren/horn wiII chirp twice.
6. Doors Lock With Automatic Rearm: (On loOtt) 12 AL_H_'_L_JJ—-i—d—
_ . . . . x Cha nel Dlsarm Alarm Or En a es tart Mo - - '
: gfip‘ffifsfifififiii’Efifigt‘ifiiignh/fimfilEmmi; ' D'SARMS ALARM = Press “19 Large bum“, the siren/zérnDfilthTiipsziwm)
‘ l ' ~ START MODE = Press the Small button, the siren/horn will chirp twice -
7. Constant Siren Output Or Pulsed Horn Honk Output: “Siren / Horn)
. SlREN = Press the Large button, the siren/horn will chirp once.
. HORN = Press the Small button, the siren/horn will chirp twice.
13. Remote Control Activated Anti tzar-Jacking: (0n/~.Otl)
- ON = Press the Large button, the siren/hem will chirp once.
- OFF = Press the Small button, the siren/horn will chirp twice.
8. ignition Controlled Door Lock/Unlock: ('On/0ff)
— ON : Press the Large button, the siren/horn will chirp once.
— OFF = Press the Small button. the siren/horn will chirp thce.
14. Door & Ignition Activated Anti Cardacking; (On/vofl)
- ON = Press the Large button, the siren/horn will chirp once.
- OFF = Press the Small button, the siren/horn will chirp twice.
9. Alarm Condition Cycle Duration: (-30/60 Seconds)
4 30 SECONDS = Press the Large button, the siren/horn will chirp once. ' 15. I nition Amiva d Anti Car-Jackin : (On/no")
— 60 SECONDS = Press the Small button, the siren/horn will chirp twice - ON = Press the Large button, the siren/horn will chirp once.
i - OFF = Press the Small button the si /h ' ' '
10. Single Or Double Unlock Pulse: (aSingIe / Double) * m" m W'" Ch'fP fw'Cé-
A SlNGLE = Press the Large button, the siren/horn will chirp once. 15- 9mm: (~On/Ofl)
— DOUBLE = Press the Small button. the siren/horn will chirp twice. if . - ON = Press the Large button, the siren/horn will chirp once
- OFF = Press the Small button, the siren/horn will chirp twice.
11. Open Door By»Pass Alert: (On hon)
4 ON : Press the Large button, the siren/horn will chirp once.
— OFF = Press the Small button, the siren/horn will chirp twice.
21
24
TRANSMlTTER PROGRAMMING MODE
This Alarm is equipped with ATV: Automatic Transmitter Verification lor your
protection. Even] time the ignition is turned ”On" the LED will Show how many
transmitters can operate your system ,
Each time Transmitter programming mode is accessed and a new Transmitter is
programed all previous Transmitters in memory will be erased and thl have to be
reprogrammed.
To Ptog Remote Trans
1) Turn ”On" the vehicle's ignition.
2) Within 7 seconds of turning "On“ the ignition Press & Release the Valet
button 5 times.
- The siren/horn will emit a long chirp confirming entry to the programming mode.
3) Within 7 seconds of entering the programming mode, Press the Large
button on each transmitter to be programmed. z‘“
- The siren/horn will emit a chirp after each transmitter has been learned.
- Up to four transmitters can be programmed,
4) To Program Transmitters For Second Vehicle Operatic :
When programing a transmitter to operate a second vehicle the small button or the
combination of pressing both buttons together can be chosen to Arm/Disarm the
Alarm in the second vehicle.
- The actual button functions of the transmitter will depend on which button is
chosen to Arm/Disarm the Alarm in the second vehicle.
- The siren/horn will emit a chirp after each transmitter has been learned.
ArmlDisarm Panig Auxiliam Channel Anti Car-Jack
Large Large Small Both
Small Small Large Both
Both Both Small
5) The Alarm will automatically exit programming mode it 7 seconds go by
without programming input or if the vehicle's ignition is turned "Ofl",
- The siren/horn will emit a long chirp to confirm exit from the programming mode.
25
Press & Hold The Small Bunorl Fat 3 Seconds ,
zr
LIMITED LIFETIME WARRANTY
Products manulacturedand sold tug/OMEGA RESEARCHSrDEvELOFMENT, INC. (the Company), are
warranted to be free lrom detects in matenats and workmanship under normal use. lta product sold
by the Company proves to be defective, the Company will repair or replace n tree ot charge within
thefirst year and therealteralt parts to be repaired will be tree with onlya nominal charge tor Omega
Research and Development, Inc.‘s iaborand return shipping, to the original owner during the liletime
ol the car in which it was originally installed.
All products lor warranty repair must be sent postage prepaid to Omega Research &
Development, lnc., PD. Box 505, Douglasvitle, Georgla 30133, with bill or sale or other dated prool
ol purchase. This warranty is nontransterable and does not apply to any product damaged by
accident, physical or electrical misuse or abuse, improper installation, alteration, any use contrary to
its intended tunetion, unauthorized service. lire, llood, lightning, or other acts oi God.
This warranty limits the Company‘s liability to the repair or replacement ol the product, The
Company shall not be responsible for removal and/orreinstallation charges, damage Ioorlhefl ol the
vehicle or its contents, or any incidental or consequential damages caused by ariyfallure or alleged
failure of the product to function properly. Under No circumstances Should This Warranty, Or The
ProductCovered By lt. Be Construed AsAGuaramee Orlnsuranoe Policy/tqainst Loss. The Company
neither assumes nor authorizes any person or organization to make any Warranties or assume any
liability in connection with the sale, installation, or use oi this product.
This device complies with F.C.C Rules pan 15. Operation is subiect to the lcilowingtwo conditions:
(1 )This device may not cause harmful interierence and, (2) This device must accept any interterence
that may be received, including interference that may cause undesired opemtiori.
The manufacturer is not responsible for any radio TV interference caused by unauthorized
modifications to this equipment. Such modifications could void the user‘s authority to operate the
equipment.
zt

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 2000:07:18 11:38:05
Creator                         : Photoshop PDF Plug-in 1.0
Producer                        : Photoshop PDF Plug-in 1.0
Create Date                     : 2000:07:18 11:37:24
Page Count                      : 15

EXIF Metadata provided by EXIF.tools