Omitec OMWF01 Omitec Wi-Fi Module User Manual 910 440B WiPort DS
Omitec Limited Omitec Wi-Fi Module 910 440B WiPort DS
Omitec >
Contents
- 1. User Manual 1 of 3
- 2. User Manual 2 of 3
- 3. User Manual 3 of 3
User Manual 2 of 3
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 566320 |
| Application ID | RtnovFIDbtg6Hu8EavyAbQ== |
| Document Description | User Manual 2 of 3 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 17.47kB (218427 bits) |
| Date Submitted | 2005-07-28 00:00:00 |
| Date Available | 2005-07-28 00:00:00 |
| Creation Date | 2004-08-05 17:51:13 |
| Producing Software | Acrobat Distiller 6.0 (Windows) |
| Document Lastmod | 2004-08-05 17:51:25 |
| Document Title | Microsoft Word - 910-440B_WiPort_DS |
| Document Creator | Acrobat PDFMaker 6.0 for Word |
WiPort™ Data Sheet General Description The WiPort is the most compact, integrated solution available to add 802.11b wireless networking to any edge device with a serial interface. Using our highly integrated hardware and software platform, you will add to your bottom line by significantly reducing product development time, risk, and cost. The WiPort offers the highest level of integration available in a device server. Within a compact package is a DSTni x86 controller, memory, 802.11b transceiver, a 10/100 Ethernet transceiver, and dual high-speed serial ports. All of this combines to give you a complete networking solution. The WiPort is the first product in a line of embedded wireless device servers, designed with flexibility to support additional wireless standards without requiring redesign. To enable access to a local network or the Internet, the WiPort integrates a fully developed TCP/IP network stack and OS. The WiPort also includes an embedded web server that can be used to remotely configure, monitor, or troubleshoot the attached device. WiPort serves web pages to a web browser when there is a need to gather information or communicate with networked devices. The WiPort becomes a conduit between you and your device over the network or Internet. The Windows™-based configuration software, Device Installer, simplifies installation and setup. The WiPort can also be configured locally through its serial port, or remotely over a network using Telnet (passwordprotected) or a web browser. Flash memory provides for maintenance-free, nonvolatile storage of web pages, and allows future system software upgrades. Hardware & Software Description The WiPort functions independently of a PC, providing a complete hardware and software solution for adding wireless connectivity to your edge devices. Within a single package this powerful device server comes with an 802.11b wireless connection, a 10/100 Ethernet transceiver, a reliable and proven operating system stored in flash memory, an embedded web server, a full TCP/IP protocol stack, and WEP security. The WiPort software runs on a Lantronix DSTni controller which has 256 KB of internal SRAM, and 16 KB of boot ROM. The WiPort communicates to the edge device through a 3.3V logic level interface. 2 MB of flash memory is included for storing firmware and web pages. WiPort Data Sheet Key Features • Complete integrated solution • Supports WLAN or Ethernet connectivity • Serial to 802.11b conversion • Stable, field proven TCP/IP protocol suite and webbased application framework • Easy configuration through a web interface • Easy installation of customized web pages • Embedded web server • 11 General Purpose Input/Output (GPIO) pins • 802.11b wireless interface • E-mail alerts • Password protection • Upgradeable firmware via the network or serial port • Dual serial ports • 128 bit WEP encryption • WPA security upgradeable • High performance data throughput A larger memory option is available that includes 4 MB of flash memory, and an additional 1 MB of SRAM. The WiPort runs on a single 3.3V supply, and has a built-in voltage supervisory circuit. The WiPort will connect through a coaxial cable “pigtail” to a panel-mounted external antenna, which makes the electro-mechanical integration very simple. Copyright© 2004, Lantronix. All rights reserved. Protocol Support The WiPort uses the widely accepted 802.11b protocol to connect to a wireless access point or ad-hoc network. It uses the Transmission Control Protocol (TCP) to assure that no data is lost or duplicated and that everything sent to the connection arrives correctly at the target. Other supported protocols are listed below: • ARP, UDP, TCP, ICMP, Telnet, TFTP, AutoIP, DHCP, HTTP, and SNMP for network communications. • IP for addressing, routing, and data block handling over the network. • User Datagram Protocol (UDP) for typical datagram applications in which devices interact with other devices without maintaining a point-to-point connection. Dimensions • The WiPort dimensions are shown in the following drawing: • TCP, UDP, and Telnet for connections to the serial port. • TFTP for firmware updates. WiPort – Embedded Web Server WiPort Data Sheet WiPort Data Sheet WiPort Pin Functionality Pin Number 10 11 12 13 14 15 16 17 18 19 20 WiPort Pin Function Pin Number 3.3V Power 3.3V Power RTS0 TXD0 RXD0 Configurable Pin 2 Configurable Pin 3 CTS0 Configurable Pin 10 Configurable Pin 8 Signal Ground Signal Ground Reset In Configurable Pin 0 RTS1 TXD1 RXD1 Configurable Pin 9 Configurable Pin 4 CTS1 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 WiPort Pin Function Reserved Reserved Signal Ground Signal Ground Reserved Reserved Ethernet Status LED2 Ethernet Status LED1 Ethernet TXEthernet TX+ Ethernet RX Center Tap Ethernet TX Center Tap Ethernet RXEthernet RX+ Configurable Pin 1 WLAN Power LED Configurable Pin 6 Configurable Pin 5 WLAN Activity LED Configurable Pin 7 Mating Connector Description Recommended: Samtec FTMH-120-03-F-DV-ES (shrouded header) The mating connector is a 1mm micro header, 40 pins, 2 x 20. Alternative: Samtec FTMH-120-03-F-DV (not shrouded) Alternative: Oupiin 2411-2X20GDN/017 (not shrouded) WiPort Wireless Specifications Category Description Network Standard Frequency Range Antenna Connector Data Rates Number of Selectable Radio Subchannels Modulation IEEE 802.11b 2.412 – 2.484 GHz 1, no diversity supported. 1,2,5.5,11Mbps(802.11b HR) 14 channels Antenna Connector Security Maximum Receive Level Receiver Sensitivity WLAN Power and Link LED Current DSSS, DBPSK, DQPSK, CCK WEP 64/128, TKIP -10 dBm (with PER < 8%) -82 dBm for 11Mbps -87 dBm for 5.5Mbps -89 dBm for 2.0Mbps -93 dBm for 1.0Mbps Max: 4 mA WiPort Data Sheet WiPort Technical Data Category CPU, Memory Firmware Reset Circuit Serial Interface Serial Line Formats Modem Control Flow Control Network Interface Protocols Supported Data Rates With Automatic Fallback Media Access Control Frequency Range Range Modulation Techniques Transmit Output Power Receiver Sensitivity Average Power Consumption Peak Supply Current Management Security Internal Web Server Weight Material Temperature Warranty Included Software Description Lantronix DSTni-EX 186 CPU, 256 KB zero wait state SRAM 2048 KB Flash or 4096 KB Flash, 16 KB Boot ROM, 1024 KB SRAM Upgradeable via TFTP and serial port Reset In is low active. Minimum reset pulse width is 2 ms at IIL = -500µA CMOS (Asynchronous) 3.3V-level signals Rate is software selectable (300 bps to 921600 bps) 7 or 8 data bits, 1-2 Stop bits, Parity: odd, even, none DTR, DCD XON/XOFF (software), CTS/RTS (hardware), none Wireless 802.11b and 10/100 Ethernet 802.11b, ARP, UDP, TCP, Telnet, ICMP, SNMP, DHCP, BOOTP, Auto IP, HTTP, SMTP, TFTP 11 Mbps 5.5 Mbps 2 Mbps 1 Mbps CSMA/CA with ACK 2.412 – 2.484 GHz Up to 328 feet indoors CCK (11 Mbps) CCK (5.5 Mbps) DQPSK (2 Mbps) DBPSK (1 Mbps) 14 dBm ± 1 dBm -82 dBm for 11 Mbps -87 dBm for 5.5 Mbps -89 dBm for 2.0 Mbps -93 dBm for 1.0 Mbps 1280 mW, 388 mA (WLAN mode; maximum data rate) 820 mW, 248 mA (WLAN mode; idle) 710 mW, 215 mA (Ethernet mode) 460 mA Internal web server, SNMP (read only) Serial login, Telnet login DeviceInstaller software Password protection, locking features, 64/128 bit WEP Serves web pages and Java applets Storage capacity: 1.8 MB or 3.8 MB (depending on Flash size) 29 grams Metal shell Operating range, WLAN: -40°C to +70°C Operating range, Ethernet: -10°C to +75°C Storage range: -40°C to +85°C (-40°F to 185°F) 2-year limited warranty Windows™ 98/NT/2000/XP based DeviceInstaller configuration software and Windows™ based Comm Port Redirector, DeviceInstaller, Web-Manager. WiPort Data Sheet Certifications Description Product Safety Country Certifications USA/Canada U.S. and Canadian (Bi-National) Standard for Safety of Information Technology Equipment, CSA-22.2 No. 60950-1-03 * UL 60950-1 Europe Standard for Safety of Information Technology Equipment, EN 60950-1 International IEC 60950-1 Agency Compliance Description Electromagnetic Compatibility Country Compliance USA CFR Title 47 FCC Part 15 Europe EN 300 328; Data Transmission Equipment Operating in the 2.4GHz ISM Band and Using Spread Spectrum Techniques EN 301 489-17 & EN 301 489-1; EMC Standard for Radio Equipment and Services Australia /New Zealand Industry Canada RSS-210 Low Power License-Exempt Radiocommunication Devices AS/NZS CISPR 22 (EMC) AS/NZS 4771 (Radio) Japan VCCI (EMC) Canada DC Characteristics for Serial and Power Interface Symbol Vcc VIL VIH VOL VOH IL Parameter Supply voltage (typical 3.3) (+/-5%) Low Level Input Voltage High Level Input Voltage Low Level Output Voltage High Level Output Voltage Input Leakage Current Min Nominal Max Units 3.14 -0.3 2.0 3.3 3.46 0.8 5.5 0.4 +/-0.01 +/-1 µA 2.4 WiPort Data Sheet Development Kit Introduction A WiPort development kit is available to provide a simple, quick and cost-effective way to evaluate the WiPort. Use the development kit to connect the WiPort to your product design, and give your newly networked product a test drive. Features of the Development Kit • Complete, ready-to-use WiPort and supporting Evaluation Board • 3.3V power supply • RS-232 cable, DB9F/F, null modem • CAT5e UTP RJ45M/M Ethernet cable • WiPort CD containing complete user documentation, DeviceInstaller, and the Comm Port Redirector • Antenna Features of the Evaluation Board The WiPort evaluation board includes a WiPort integrated with the following features: • Ready to use – just plug in the WiPort and connect to your system • Dual high-speed RS-232 transceivers & DB9 connectors for easy connection to a PC • Complete Ethernet interface, including magnetics, RJ-45 jack, and status LEDs • Test header for easy access to all 40 of the WiPort power & I/O pins Ordering Information Model Part Number Description WiPort WP2001000-01 WiPort SMPL WP200100S-01 WiPort Dev. Kit WP200100K-01 Standard WiPort Min. order: 25 units WiPort Sample Case 1 WiPort enclosed WiPort Development Kit WiPort Antenna 930-029 Accessory Antenna For details contact your local Lantronix representative or Lantronix directly: Asia Pacific Region (E-mail): AsiaPacific_sales@lantronix.com Europe (E-mail): eu_sales@lantronix.com Japan (E-mail): japan_sales@lantronix.com United States (E-mail): sales@lantronix.com Latin America & Caribbean (E-mail): la_sales@lantronix.com or call OEM sales support at 800-526-8764. ©2004 Lantronix, Inc. All rights reserved. Lantronix, WiPort and DSTni are trademarks of Lantronix. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 910-440B 08/2004 WiPort Data Sheet
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Page Count : 7 XMP Toolkit : XMP toolkit 2.9.1-13, framework 1.6 About : uuid:16740bba-0f55-4aff-9df8-f0ed216373b9 Producer : Acrobat Distiller 6.0 (Windows) Creator Tool : Acrobat PDFMaker 6.0 for Word Modify Date : 2004:08:05 17:51:25-07:00 Create Date : 2004:08:05 17:51:13-07:00 Metadata Date : 2004:08:05 17:51:25-07:00 Document ID : uuid:0e2b09c1-d22c-4935-8c2f-ab85f99fea1f Format : application/pdf Title : Microsoft Word - 910-440B_WiPort_DS Creator : Author :EXIF Metadata provided by EXIF.tools