Omron Automotive Electronics Korea OKA-205W UNIT ASSY - WIRELESS CHARGING User Manual OKA 205W ENG

Omron Automotive Electronics Korea Co., Ltd. UNIT ASSY - WIRELESS CHARGING OKA 205W ENG

User Manual

1. Constitution of the Unit Assy-Wireless Charging ( WPC ) for vehicle Wireless Charger Unit, it’s possible to charge the receiver based upon WPC( Wireless Power Consortium ) Standard. WPC detects the receiver based upon the WPC standard being put on the surface of charge, and begins to charge it. WPC detects conditions of the receiver and controls the transmission electric power by the state of the battery of it. When the receiver is removed,WPC will suspend the transmission electric power. When the receiver is full charge, WPC will suspend the transmission electric power. WPC can recognize a foreign object and suspend the transmission electric power.USER MANUAL_OKA-205W
2. User's manual (provisionally) ◎ Unit Assy - Wireless Charging ( OMRON KOREA : OKA-205W ) You can charger a mobile phone or the battery pack and the like to Qi-compliant Wireless Charger Unit. ※ Wireless Charger Unit is abbreviated as WPC.
4. Specification 4.1 CONTROL PART 4.1.1 CPU Type uPD78F0567-xxx(8bit) Manufacturer : RENESAS Corporation ROM 256 Kbytes RAM 16 bytes EEPROM 32 bytes Clock frequency 8 MHz Package 80pin SSOP 4.1.2 Others Dimension 39.1mm×70.9mm×17.0mm Weigh about 290 g Battery Car Battery ( DC 12 V ) Operating Voltage, Current DC 12V, 2.0A Transmission Frequency 111 KHz Operation Temperature -30 ℃ ~ 75℃ Support Standard WPC Ver 1.2
4. Specification 4.2 Wireless Charging PART 4.2.1 CPU Type WCT1001A Manufacturer : Freescale ROM 64 Kbytes RAM 8 bytes Clock frequency 8 MHz Package 64pin LQFP 4.1.2 Antenna ( Coil ) Type 3 Coil Assembly Dimension 116.1 mm * 64.01 mm * 5.0 mm
5.Features 5.1 Charging Function 5.2 Foreign Objection Detection WPC possesses the charge function of 3 coils type based upon WPC Ver 1.2. It controls the resonance voltage according to the request from the receiver. It doesn’t change the frequency of the resonance voltage. It judges whether there is a thing on the charge surface by the different amount of the resonance voltage and detects the receiver. WPC monitors the power loss from the resonance voltage and current inside it. WPC judges that there is a foreign object when power loss is beyond the constant value.
FCC Part 15.19This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions: (1) This device may not cause harmful interference, and (2)this device must accept any interference received, including interference that maycause undesired operation.FCC Part 15.21Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.FCC RF Radiation Exposure StatementThis equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.The equipment is installed in a vehicle with a minimum distance of 20 cm to any direction between the radiator and users. During normal usage, it should be at least 20 cm away from the users.This device complies with Industry Canada licence-exempt RSS standard(s).Operation is subject to the following two conditions:(1) this device may not cause interference, and(2) this device must accept any interference, including interference that may causeundesired operation of the device.Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes :(1) l'appareil ne doit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.IC RF Radiation Exposure StatementThis equipment complies with IC RF Radiation exposure limits set forth for an uncontrolled environment.This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.Déclaration d'Industrie Canada sur l'exposition aux radiofréquencesCet équipement est conforme aux limites établies par Industrie Canada en matière d'exposition aux radiofréquences dans un environnement non contrôlé. Cet appareil et son antenne ne doivent pas être colocalisés ou fonctionner en conjonction avec tout autre antenne ou émetteur.Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps.

Navigation menu