Omron Automotive Electronics Korea OKA-320T Remote Keyless Entry System User Manual OKA 320T user s manual

Omron Automotive Electronics Korea Co., Ltd. Remote Keyless Entry System OKA 320T user s manual

User Manual

Download: Omron Automotive Electronics Korea OKA-320T Remote Keyless Entry System User Manual OKA   320T   user s manual
Mirror Download [FCC.gov]Omron Automotive Electronics Korea OKA-320T Remote Keyless Entry System User Manual OKA   320T   user s manual
Document ID482947
Application IDkze8+opboy+X/NjvJhzqFg==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize17.89kB (223683 bits)
Date Submitted2004-10-28 00:00:00
Date Available2004-10-28 00:00:00
Creation Date2004-10-15 16:53:43
Producing SoftwareAcrobat PDFWriter 4.05 Windows NT¿ë
Document Lastmod2004-10-27 16:58:34
Document TitleOKA - 320T - user's manual.PDF
Document CreatorOKA - 320T - user's manual.hwp [C:\Documents and Settings\james_kwon\My Documents\업체 정보 ㄱ-z\ㅅ\SGS-서울-경기지사\한국오므론전장\3모델 변경신고\] - 한글
Document Author: james_kwon

OMRON
AUTOMOTIVE
ELECTRONICS
KOREA
OKA-320T
Transmitter, RF Keyless Entry System
1.
Constitution of the Radio Frequency Keyless Entry
System for vehicle
The radio frequency keyless entry is a system that it controls locking and unlocking the door and alarm
the horn by wireless remote controller. This system consists of threecomponents. The TRANSMITTER is a
device that transmits the signal when the button is pressed.
The transmission signal consists of several
synchronous codes, unique identification code, securitycodeandfunctioncode.The RECEIVER is fixed inside
the vehicle. It works intermittently to prevent the battery exhaustion. When the receiver detects the
synchronouscode,itrunscontinuouslyto receive the signals completely. Afterreceiving the signal, the receiver
decides which operation will be performed. The user can select the following operations by pressing the
button of the remote transmitter.
OPERATION
ACTION
LOCK
lock the door
UNLOCK
unlock the door
PANIC
alarm the horn
Transmitter
f = 313.85MHz
- 2 -
2. Operation
REMOTE TRANSMITTER
You can lock and unlock your vehicle with the remote transmitter.
LED
LOCK
UNLOCK
PANIC
LOCK
When you push the LOCK button, all the doors will lock.
You cannot lock any of the doors with the remote transmitter if any door is open or the key is the
ignition switch.
UNLOCK
When you push the UNLOCK button, all the doors will unlock.
You cannot unlock any of the doors with the remote transmitter if any door is open or the key is in the
ignition switch.
PANIC
When you push the PANIC button, horn will alarm.
- 3 -
3. Specification
3.1 CPU
Type
uPD789860-xxx(8bit)
Manufacturer : NEC Corporation
ROM
4 Kbytes
RAM
128 bytes
EEPROM
32 bytes
Clock frequency
4.19MHz
Clock frequency generation
CRYSTAL Osillation
Package
20pin SSOP
3.2 RF block
Carrer frequency
313.85MHz
Frequency generation
CRYSTAL OSILLATION
Modulation
FSK
Bit transmission rate
1000bps or 500bps
Bandwidth
120KHz
RF output power (field strength)
< 75.55 dBuV/m at 3m
3.3 Others
Dimension
62mm(H) × 34mm(W) × 15mm(T)
Weigh
23g
Battery
Lithium cell (CR2032)
Manufacturer : PANASONIC Battery corporation etc.
Operation Voltage
DC3V, 10mA
Operation Temperature
-20℃˜+60℃
- 4 -
4.Features
4.1 Transmission frame
The transmission begins immediately in case of LOCK and UNLOCK and PANIC button is pressed.
The transmission frame consists of the synchronous frame and the data frame. The synchronous frame
has 30 synchronous codes that it will be used for the receiver to wake up. The data frame consists of
24bit length identificationcode,16bit security code and function code. 16million different identification codes
are available.
The security code is always changed in case of any of the buttons is pressed. The transmission time is
typically 300 milliseconds.
4.2
Battery saving
To prevent the battery exhaustion , the micro-computer of the transmitter is usually inactive. When the button
will be pressed, the micro-computer wakes up immediately and judges which button is pressing. Then the
micro-computerconstructs the transmission frame and radiates it from the antenna .Aftertransmitting , the
micro-computer switches stand-by mode by itself.
- 5 -

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Creator                         : OKA - 320T - user's manual.hwp [C:\Documents and Settings\james_kwon\My Documents\업체 정보 ㄱ-z\ㅅ\SGS-서울-경기지사\한국오므론전장\3모델 변경신고\] - 한글
Create Date                     : 2004:10:15 16:53:43
Title                           : OKA - 320T - user's manual.PDF
Author                          : james_kwon
Producer                        : Acrobat PDFWriter 4.05 Windows NT¿ë
Modify Date                     : 2004:10:27 16:58:34+09:00
Page Count                      : 6
EXIF Metadata provided by EXIF.tools
FCC ID Filing: OSLOKA-320T

Navigation menu