Omron Automotive Electronics Korea OKA-450T RF Keyless Entry System (Transmitte User Manual OKA 450T CE
Omron Automotive Electronics Korea Co., Ltd. RF Keyless Entry System (Transmitte OKA 450T CE
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3079630 |
| Application ID | hHbDdQNUGIn9FetqD2h4mw== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 19.11kB (238854 bits) |
| Date Submitted | 2016-07-28 00:00:00 |
| Date Available | 2017-01-24 00:00:00 |
| Creation Date | 2016-07-05 15:53:34 |
| Producing Software | Acrobat Distiller 11.0 (Windows) |
| Document Lastmod | 2016-07-20 11:32:16 |
| Document Title | OKA-450T (CE).xls |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | hyojung_nam |
Constitution of the Radio Frequency Keyless Entry System for vehicle The radio frequency keyless entry is a system that it controls locking and unlocking the door by wireless remote controller. This system consists of three components. The TRANSMITTER is a device that transmits the signal when the button is pressed. The transmission signal consists of several synchronous codes, unique identification code , security code and function code. The RECEIVER is fixed inside the vehicle. It works intermittently to prevent the battery exhaustion. When the receiver detects the synchronous code, it runs continuously to receive the signals completely. After receiving the signal, the receiver decides which operation will be performed. The user can select the following operations by pressing the button of the remote transmitter. PRODUCT NO. OKA-450T OPERATION ACTION LOCK LOCK THE DOOR UNLOCK UNLOCK THE DOOR TRUNK UNLOCK THE TRUNK Transmitter f = 433.92MHz User's manual (provisionally) ◎REMOTE TRANSMITTER LOCK UNLOCK TRUNK You can lock and unlock your vehicle with the remote transmitter. LOCK Wh When you push h th the b button, tt allll th the d doors will ill llock. You cannot lock any of the doors with the remote transmitter if any door is open or the key is the ignition switch. UNLOCK When you push the button, all the doors will unlock. You cannot unlock any of the doors with the remote transmitter if any door is open or the key is in the ignition switch. TRUNK When you push the TAIL GATE button for 1.0sec, It will unlock. Attention For use only with battery PANASONIC Battery corporation etc., Lithium cell (CR2032) Specificati 1 CPU Type uPD78F0567-xxx(8bit) Manufacturer : RENESAS Corporation ROM 8 Kbytes RAM 128 bytes EEPROM 32 bytes Clock frequency Clock frequency generation RESONATOR OSCILATION Package 20pin SSOP 2 RF block Carrer frequency 433.92MHz Frequency generation X-TAL Modulation FSK Bit transmission rate 2Kbps or 1Kbps Bandwidth ±40KHz RF output power (field strength ≤10mW (e.r.p.) 3 OthersOthers Dimension 71.7mm(H) x 39.2mm(W) x 18.05mm(T) Weigh 54.5 g Battery Lithium cell (CR2032) Manufacturer : PANASONIC Battery corporation etc. Operation Voltage DC3V Operation Temperature -20℃∼+60℃ Features 1 Transmission frame The transmission begins immediately in case of LOCK and UNLOCK and TRUNK button is pressed. The transmission frame consists of the synchronous frame and the data frame. The synchronous frame has 320bit synchronous codes that it will be used for the receiver to wake up. The data frame consists of 24bit length identification code, 16bit security code and 4bit function code and 8bit crc code. 16million different identification codes are available. The security code is always changed in case of any of the buttons is pressed. The transmission time is typically 300 milliseconds. 2 Battery saving To prevent the battery exhaustion , the micro-computer of the transmitter is usually inactive. When the button will be pressed, the micro-computer wakes up immediately and judges which button is pressing. Then the micro-computer constructs the transmission frame and radiates it from the antenna. After transmitting, the micro-computer switches stand-by mode by itself. Marking label RF Keyless Entry System Model Number : OKA- 450T Transmitter: 3 V Omron Automotive Electronic Korea FCC Part 15.19 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : hyojung_nam Create Date : 2016:07:05 15:53:34+09:00 Modify Date : 2016:07:20 11:32:16+09:00 Has XFA : No XMP Toolkit : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03 Metadata Date : 2016:07:20 11:32:16+09:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : OKA-450T (CE).xls Creator : hyojung_nam Document ID : uuid:fdbab709-38f9-4fc2-8915-bb29eef3282f Instance ID : uuid:b25217c6-807a-4c4c-ab39-60da7c9a3a82 Producer : Acrobat Distiller 11.0 (Windows) Page Count : 6EXIF Metadata provided by EXIF.tools