Onkyo Home Entertainment BM875A Bluetooth module User Manual Model manual

Download:
Mirror Download [FCC.gov]
Document ID	3960695
Application ID	MH7TRHCJ+JMXBA9LVxXFGA==
Document Description	Model manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	73.12kB (914026 bits)
Date Submitted	2018-08-11 00:00:00
Date Available	2018-08-11 00:00:00
Creation Date	2018-08-06 17:38:02
Producing Software	Microsoft: Print To PDF
Document Lastmod	2018-08-06 17:38:02
Document Title	Microsoft Word - User manual for FCC-IC 180731.docx
Document Author:	itagaki-mika

Product Specification
Onkyo corporation
User manual Bluetooth module BM875A
Type name
BM875A
Brand
ONKYO
Regulatory Statements
- OEM integrators must ensure that its product is electrically identical to BM875A reference designs.
Any modifications to BM875A reference designs may invalidate regulatory approvals in relation to
the product, or may necessitate notifications to the relevant regulatory authorities.
- OEM integrators are responsible for regression testing to accommodate changes to designs, new
antennas, and host and submit for C2PC filings.
Colocation with other transmitter modules will be addressed through filings for those co-located
transmitters when necessary or that colocation of other transmitters will be according to
applicable KDB guidelines including those for RF exposure
-The final system integrator must ensure there is no instruction provided in the user manual or
customer documentation indicating how to install or remove the transmitter
- Appropriate labels must be affixed to the product that complies with applicable regulations in all
respects. The regulatory label on the final system must include the statement: “Contains FCC ID:
ATM-BM875A and/or IC: 6547A-BM875A”.
- A user’s manual or instruction manual must be included with the product that contains the text as
required by applicable law shall be provided to OEM integrators.
For USA—Federal Communications Commission (FCC)
FCC COMPLIANCE STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
INFORMATION TO USER:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by tuning the equipment off
and on, the user is encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Caution: Exposure to Radio Frequency Radiation.
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons. This device must not be
collocated or operating in conjunction with any other antenna or transmitter.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
-1-
Product Specification
Onkyo corporation
The final host manual shall include the following regulatory statement:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy. If not installed and used in accordance with the instructions, it may
cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by tuning the equipment off
and on, the user is encouraged to try and correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna
-Increase the distance between the equipment and the receiver.
-Connect the equipment to outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
To comply with FCC RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons. This device must not be
collocated or operating in conjunction with any other antenna or transmitter.
-2-
Product Specification
Onkyo corporation
For Canada - Industry Canada (IC)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Cet appareil est conforme avec Industrie Canada exempts de licence standard RSS (s). L‘utilisation
de ce dispositif est autorisée seulement aux conditions suivantes : (1) il ne doit pas produire de
brouillage et (2) l’ utilisateur du dispositif doit étre prêt à accepter tout brouillage radioélectrique
reçu, même si ce brouillage est susceptible de compromettre le fonctionnement du dispositif.
-3-
Product Specification
Onkyo corporation
-4-
Product Specification
Onkyo corporation
-5-
Product Specification
Onkyo corporation
-6-
Product Specification
Onkyo corporation
-7-
Product Specification
Onkyo corporation
-8-
Product Specification
Onkyo corporation
-9-
Product Specification
Onkyo corporation
- 10 -

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Warning                         : Info object (88 0 obj) not found at 911946

EXIF Metadata provided by EXIF.tools