Onkyo Home Entertainment ESBT1 Bluetooth Headphone User Manual H2 FCC Class Culture R1

Onkyo Corporation Bluetooth Headphone H2 FCC Class Culture R1

User Manual

Table of Contents AudioJets Quickstart Guide AudioJets Quickstart Guide1. Introduction:Welcome to the world of wireless with AudioJets Bluetooth Headphones. This Quickstart guide will help you familiarize yourself with your new headphones to keep you moving with your busy life.Safety Rules:2. Kit Contents:1. Introduction ............................................2. Kit Contents ............................................3. Connection Diagram ...........................4. How to use .............................................4.1 General Function .............................4.2 Pairing to mobile phone .................4.3 Charging your device ....................5. Technical Specification ........................6. Service and Support .............................112223556Please follow the rules depicted in this manual closely to ensure your safety. Before using your new AudioJets Headphones, we strongly encourage you to read through this user manual.Be cautious for any sharp edges, uneven surfaces, metal parts, accessories or product packaging that could cause potential harm or injury.Do not attempt to modify, repair or dismantle AudioJets Bluetooth Headphones in any manner. Doing so will void the product warranty and may result in fire, electrical shock, or permanent damage to your headphones.Do not use any volatile liquids to clean your AudioJets Headphones.Do not use AudioJets Headphones in any potentially hazardous locations or environments.1.2.3.4.5.1x AudioJets Bluetooth Headphones1x USB Charger1x Quickstart GuideAudioJets Quickstart GuideAUDIOJETS BLUETOOTH HEADPHONESQUICKSTART GUIDE3. Connection Diagram4. How to use: 4.1 General Functions:Volume UpVolume Down /Transfer voice callTurn On & Turn Off /Enter pairing mode /Play & Pause /Answer and End Call /Reject Call MicChargingNextNextPreviousDesired ResultTurn OnPress the “ ” button for 3 seconds when the device is off. (A blue LED slowly flashes and a tone will beep to indicate device is on)While powered off, press the “ ”button and hold for 6 seconds. (Blue and Red LEDs will flash rapidly with two beeps)In Pairing Mode, use a Bluetooth enabled mobile phone or device to pair together. See section 4.2 for detailed instructions.Press “ ” to play when the device is paused and press “ ” to pause when the device is playing.Press “+” to raise volume.Enter PairingModeRequired ActionPairingPlay / PauseVolume UpDesired Result Required ActionPress “-” to raise volume.Volume DownPress “<” for previous track.PreviousPress “>” for next track.NextA red LED will flash periodically with a beep to indicate low battery.Low Battery WarningPlug Micro USB into headphone, red LED will indicate the device is charging.ChargingPress the “ ” button for 1 second to answer incoming phone calls.Answer CallPress the “ ” button for 3 seconds while the device is on. (A series of tones and red LED will flash to indicate device is off)Turn OffPress the “-” button for 2 seconds to transfer the call between the mobile device and headphones.Transfer Voice CallPress the “ ” button for 1 second to end phone call.End CallPress the “ ” button for 1 second to end phone call.End Call4.2 Pairing to a mobile device or other device:To use your AudioJets Bluetooth Headphones, you must first pair your headphones with a Bluetooth enabled device. Once your headphones are paired to a specific Bluetooth enabled device, they will remain paired and will automatically recognize each other when they are within range.Turn on your Bluetooth enabled phone and ensure its Bluetooth funcion is activated.Turn on your AudioJets Bluetooth Headphones to pairing mode (see section 4.1 for instructions on entering pairing mode).Search for Bluetooth enabled devices on your phone by following phone manufacturer’s instructions. Refer to your phone manufacturer’s user manual for more information.After a few seconds, the phone will list the devices as a recognized Bluetooth device. Select “AudioJets” and follow your phone’s instructions to complete this pairing.Your phone may request a passkey or PIN, please enter “0000” as your passkey or PIN.FCC Warning: 15.19(a)(3)This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.15.21Changes or modifications not expressly approved by the party responsible for compliancecould void the user's authority to operate the equipment.15.105(b)NOTE: This equipment has been tested and found to comply with the limits for aClass B digital device, pursuant to Part 15 of the FCC Rules. These limits aredesigned to provide reasonable protection against harmful interference in aresidential installation. This equipment generates, uses and can radiate radiofrequency energy and, if not installed and used in accordance with theinstructions, may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user isencouraged to try to correct the interference by one or more of the followingPairing to a Bluetooth enabled phone:Pairing to a computer or entertainment device:a.b.c.d.e.If your device is not Bluetooth enabled, a Bluetooth adapter is necessary. Install adapter (not included) with your computer or entertainment device and ensure its Bluetooth function is activated.Turn on device to enter pairing mode.Open the Bluetooth software installed on your computer or entertainment device and select option to search for other Bluetooth enabled devices. Refer to Bluetooth Software manufacturer’s user manual for more information.After a few moments “AudioJets” will be listed as a discoverable device. Select “AudioJets” and complete the pairing process.a.b.c.d.4.3 Charging Your AudioJets:To charge your AudioJets Bluetooth Headphones, connect Micro USB charger to headphones and connect universal USB to any USB enabled port or AC charger. Ensure that your device is fully charged for at least 6 hours before initial use. Red LED will stay lit while charging. When charging is complete, LED will change from Red to Blue.5. Technical Specifications:Warning:Ensure that AC charger or USB enabled port(s) are compatible with headphones (USB Type A / USB Micro B).Parameter ValueBluetooth Specification 2.1 +EDRFrequency Response 80 Hz - 20 KHzLoudspeaker Output 20mWBluetooth ProfileRF Range 10 mSignal-to-Noise >90dBSupport A2DP1.2, AVRCP1.0, HFP1.5, HSP1.0Parameter ValueDistortion <1.0%Playback Time 8 hoursCharging Time 2.5 hoursWeight 110gDimenstions(L X W X H) 156.9 X 163.5 X 49mm6. Service and Support:If your device is not performing as it should be, please contact Class & Culture by sending an email to support@classandculture.com7. Experience the ‘speed of sound’ on the go and enjoy your busy lifestyle wire-free.1 2 3 4 5 6AudioJets Quickstart Guide AudioJets Quickstart Guide AudioJets Quickstart Guide7AudioJets Quickstart Guidemeasures:-- Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment into an outlet on a circuit differentfrom that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV technician for help.RF Exposure Informaion(MPE)FCC RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.8AudioJets Quickstart GuideH2说明书客 户2013-06-14SuesanR1.0技术要求：物料编号：513-0230-物料描述：H2说明书\Audiogets

Navigation menu