Onset Computer MX1101 Relative Humidity Data Logger User Manual MAN QSG MX1101
Onset Computer Corporation Relative Humidity Data Logger MAN QSG MX1101
User Manual.pdf
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2333466 |
| Application ID | 2wG0M1zc/bx6w8Y7H1FGPQ== |
| Document Description | User Manual.pdf |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 15.61kB (195073 bits) |
| Date Submitted | 2014-07-23 00:00:00 |
| Date Available | 2014-07-23 00:00:00 |
| Creation Date | 2014-06-27 16:57:19 |
| Producing Software | Acrobat Distiller 9.0.0 (Windows) |
| Document Lastmod | 2014-06-27 16:57:19 |
| Document Title | Microsoft Word - MAN-QSG-MX1101 |
| Document Creator | PScript5.dll Version 5.2.2 |
| Document Author: | mba |
Quick Start for the HOBO® MX Temp/RH Logger (MX1101) Go to the App Store et download HOBOmobile™ to your iPhone®, iPod touch®, or iPad®. Install the batteries in the logger. Open the battery door on the back of the logger and insert two AAA batteries observing polarity. Reinsert the battery door and snap it back into place. Open HOBOmobile. Enable Bluetooth® in your device settings if prompted. In HOBOmobile, tap . The logger should appear in the Recently Seen/In Range list shown in step 5. If the logger does not appear, make sure the logger is within range of your device. Tap a row in the Recently Seen/In Range list to connect to the logger. Once connected, tap Configure to set up and start the logger. Choose your logger settings and then tap Start in the upper right corner of the Configure screen. The logger will begin logging data based on the settings you selected. Deploy the logger using the magnets on the back of the logger case or the mounting materials included. To offload data from the logger to your device, connect to it and tap Readout (shown in example in step 6). The data from the logger is saved to your device. Tap and then tap the mini‐ graph to view a larger version of the graph or to share the file. For help with HOBOmobile or more information about this logger, tap the About icon in the app, scan the code at right or go to: www.onsetcomp.com/HOBOmobile 17839‐A MAN‐QSG‐MX1101 Quick Start for the HOBO® MX Temp/RH Logger (MX1101) Go to the App Store and download HOBOmobile™ to your iPhone®, iPod touch®, or iPad®. Install the batteries in the logger. Open the battery door on the back of the logger and insert two AAA batteries observing polarity. Reinsert the battery door and snap it back into place. Open HOBOmobile. Enable Bluetooth® in your device settings if prompted. In HOBOmobile, tap . The logger should appear in the Recently Seen/In Range list shown in step 5. If the logger does not appear, make sure the logger is within range of your device. Tap a row in the Recently Seen/In Range list to connect to the logger. Once connected, tap Configure to set up and start the logger. Choose your logger settings and then tap Start in the upper right corner of the Configure screen. The logger will begin logging data based on the settings you selected. Deploy the logger using the magnets on the back of the logger case or the mounting materials included. To offload data from the logger to your device, connect to it and tap Readout (shown in example in step 6). The data from the logger is saved to your device. Tap and then tap the mini‐ graph to view a larger version of the graph or to share the file. For help with HOBOmobile or more information about this logger, tap the About icon in the app, scan the code at right or go to: www.onsetcomp.com/HOBOmobile 17839‐A MAN‐QSG‐MX1101 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Industry Canada Statement This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Avis de conformité pour l’Industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. To comply with FCC and Industry Canada RF radiation exposure limits for general population, the HOBO MX1101 loggers must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter. 1‐800‐LOGGERS (564‐4377) • 508‐759‐9500 www.onsetcomp.com • loggerhelp@onsetcomp.com © 2014 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOmobile are trademarks or registered trademarks of Onset Computer Corporation. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective companies. 17839‐A MAN‐QSG‐MX1101 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. Industry Canada Statement This device complies with Industry Canada license‐exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Avis de conformité pour l’Industrie Canada Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. To comply with FCC and Industry Canada RF radiation exposure limits for general population, the HOBO MX1101 loggers must be installed to provide a separation distance of at least 20cm from all persons and must not be co‐located or operating in conjunction with any other antenna or transmitter. 1‐800‐LOGGERS (564‐4377) • 508‐759‐9500 www.onsetcomp.com • loggerhelp@onsetcomp.com © 2014 Onset Computer Corporation. All rights reserved. Onset, HOBO, and HOBOmobile are trademarks or registered trademarks of Onset Computer Corporation. iPhone, iPad, and iPod touch are registered trademarks of Apple Inc. Bluetooth is a registered trademark of Bluetooth SIG, Inc. All other trademarks are the property of their respective companies. 17839‐A MAN‐QSG‐MX1101
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : mba Create Date : 2014:06:27 16:57:19-04:00 Modify Date : 2014:06:27 16:57:19-04:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : PScript5.dll Version 5.2.2 Format : application/pdf Title : Microsoft Word - MAN-QSG-MX1101 Creator : mba Producer : Acrobat Distiller 9.0.0 (Windows) Document ID : uuid:07b8b6dd-f5f0-4b5b-a1c1-efab2c1953dc Instance ID : uuid:d52199aa-c4f9-4556-acf4-2ec8136aef70 Page Count : 2EXIF Metadata provided by EXIF.tools