OpenVox Communication V100-PTMC Transcoding Cards User Manual V100 ptmc Hardware Install

Download:
Mirror Download [FCC.gov]
Document ID	1639869
Application ID	cIX0Od8DSOVf3n6Wh8+Lqg==
Document Description	Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	66.42kB (830215 bits)
Date Submitted	2012-02-20 00:00:00
Date Available	2012-02-20 00:00:00
Creation Date	2011-12-01 15:29:47
Producing Software	Acrobat Distiller 7.0 (Windows)
Document Lastmod	2012-02-08 09:51:33
Document Title	Microsoft Word - V100_ptmc-Hardware-Install.doc
Document Creator	PScript5.dll Version 5.2
Document Author:	wangxiang

Hardware installation Manual
深圳开源通信有限公司
OpenVox-Best Cost Effective Asterisk Cards
OpenVox V100_PTMC hardware installation Manual
Written by: Carson Wang
Date: 11/24/2011
Version:1.00
深圳开源通信有限公司
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
OpenVox-Best Cost Effective Asterisk Cards
OpenVox Communication Co. Ltd.
Addr: F/3, Building 127, Jindi industrial zone,
Futian district, Shenzhen, Guangdong, China 518048,China
Tel:+86-755-83460576,Fax:+86-755-83460491
E-Mail：sales@openvox.com.cn support@openvox.com.cn
IM for Sales:
miaolin71@hotmail.com
Business Hours: 9:30AM-17:30PM from Monday-Friday
URL：openvox.com.cn
Thank You for Choosing OpenVox Products!
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Copyright
Copyright© 2011 OpenVox Inc. All rights reserved. No part of this document may be
reproduced without prior written permission.
Confidentiality
Information contained herein is of a highly sensitive nature and is confidential and proprietary
to OpenVox Inc. No part may be distributed, reproduced or disclosed orally or in written form to
any party other than the direct recipients without the express written consent of OpenVox Inc.
Disclaimer
OpenVox Inc. reserves the right to modify the design, characteristics, and products at any time
without notification or obligation and shall not be held liable for any error or damage of any
kind resulting from the use of this document.
OpenVox has made every effort to ensure that the information contained in this document is
accurate and complete; however, the contents of this document are subject to revision
without notice. Contact OpenVox to ensure you have the latest revision of this document.
Trademarks
All other trademarks mentioned in this document are the property of their respective owners.
EMC (pending)
FCC Part 15 Class B
EN55022 Class B
EN55024
General Safety Instructions
WARNING
The PxCC that have V100_PTMC card installed must comply with
the country specific safety regulations.
WARNING
Only service personnel should install V100_PTMC card.
WARNING
Before you install V100_PTMC card or remove the cover from your
PMC carrier, Unplug the power cord from the computer.
WARNING
For avoiding personal injuries and damage to your computer,and
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
V100_PTMC card, make sure the card’bezel is secured to the
PMC carrier ’s Chassis ground by fastening the card with the
screw.
WARNING
Electrical Surges,ESD are very destructive to the equipment.
To avoid it,make sure there is a low impedance discharge path
from your computer to Chassis ground.
WARNING
To reduce the risk of damage or injury,follow all steps or
procedures as instructed.
Release History
Vesrsion Date
1.0O
11/24/2011
Changes
Editor
First preliminary release. Carson Wang
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Contents
Conventions
About This manunnal
Chapter 1 Overview
Overview
Feature
Codec Support
Target Applications
Dimensions
Interface
Power Requirments
Operating Temperature Range
Humidity
Hardware and Software Requirement
Chapter 2 Hardware Architecture
Introduction
Vocallo DSP and core module
Giga NIC
Front panel RJ45
P4 in PTMC connectors
PTMC connectors
Glue
Dip Switch
LED indicator
Chapter 3 Hardware installation
Chapter 4 References
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Tables
Table 1: List of used Abbreviations
Table 2: P1,P1 Assignments
Table 3: P3 Assignments
Table 4: P4 Assignments
Table 5: Map List between core module and PMC Connectors
Figures
Figure 1 V100_PTMC Diagram
Figure 2 V100_PTMC
Figure 3 PMC Connectors in V100_PTMC
Figure 4 Dip Switch
Figure 5 Front panel
Figure 6 View V100_PTMC Installation
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Conventions
If not otherwise specified, addresses maps are written in hexadecimal notation,
identified by 0x.
Table 1 gives a list of the abbreviations used in this document:
Table 1: List of used Abbreviations
About This manunnal
This manunnal is technical reference for the V100_PTMC for CompactPCI.
Here is a brief description of the information that you will find in this manual.
Chapter 1 provides an overview of the V100_PTMC as well as a brief information
regarding feature,Codec support ,target applications and system notification
specifics.
Chapter 2 contains an indepth product diagram and necessary information for
integrating the V100_PTMC into your CompactPCI system.
Chapter 3 contains the detailed information on unpacking and installing the
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
V100_PTMC into your PCCs .
Chapter 4 lists standards and references
Chapter 1 Overview
Overview
Because of its low bandwidth requirements, The voice data compression
Codecs ,such as G.729,G.726,AMR,G.722,iLBC ,etc. are commonly used in VoIP
applications.The G.711 Codecs is commonly used in legacy telephone network. For
bridging TDM to VoIP connectivity ,it needs Codec transformation. Compared with
transformation in software,The V100 ,Based Multicore-DSP ,can convert more sessions
of transcoding,relieve the host CPU resources.
The V100 card, are rated to handle up to 32,64,128,256,400 bi-directional Codec
１
for transcoding.
transformations, without additional licensing fees
The V100_PTMC is a PMC for transcoding.In additon, It is a PTMC for extending
PMC to support stand telecom and telephony interfaces. It is usable with a wide range
of PCC ,PT2CC,PT3CC,PT5CC.and can provide CompactPCI/fornt-panel Gbe/Backplane
Gbe/Local CT media/control flow paths. These features can save the cost and support
flexible applications.
The V100 can be worked with Asterisk® and FreeSWITCH® .In addition, the Media
message-based API makes the development easy since the messages and media flow
communicate between the PCC’s host and V100_PTMC through Ethernet interface .
Feature
• High density up to 30 to 400 Transcoding
１
• No addionnal License Fee
• Compliant with PICMG 2.15(PTMC) electrical specification and IEEE
1386,IEEE1386.1(PMC)mechanical specifications
• Configurable for PT2MC/PT3MC/ PT5MC
• Local CT Bus allowing flexible routing of TDM timeslots both between the PTMC
Sites and the H.110 backplane CT Bus.
• PT5MC includes Gbe connectivity to backplane resources
• PMC/PT2MC/PT3MC include Gbe connectivity to front panel
• Multi Media/Control Flow Paths
• Relieve Host CPU Load
• Release API for Integration
• OS : Linux and Windows
• Integrates in Asterisk® and FreeSWITCH®
• Support distributed or intergrated Application
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Codec Support
•
•
•
•
•
１
G.711
G.722
G.722.1
G.726
G.729AB
•
•
•
•
•
GSM-FR
GSM-EFR
AMR
AMR-WB (G.722.2)
iLBC
Except for AMR and AMR-WB
Target Applications
•Hosted VoIP GateWay
•Conferencing Server
•IVR Server
•Distributed Office PBX
•Call Centers
Dimensions
• Compliant with IEEE1386 mechanical specifications
• 149.0x74.0mm (PCB)
Interface
•PCI :32bit 33/66MHz
•Local CT
•10/100/1000 BASE-T RJ45
•UART
•Backplane Gbe
•PMC Connector
Power Requirments
• 2.2A @3.3V
Operating Temperature Range
•0 – 50 °C
Humidity
•10 TO 90% NON-CONDENSING
Hardware and Software Requirement
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
•PCC,PT2CC,PT3CC,PT5CC
•Windows/Linux in Host
Chapter 2 Hardware Architecture
Figure 1 presents the functional blocks of the V100_PTMC.
Figure 1 V100_PTMC Diagram
The flollowing is the V100_PTMC image
Figure 2 V100_PTMC
10
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Introduction
The V100_PTMC is a high density codec transcoding card. In addition,it is extended
to provide voice quality processing features such as voice echo cancellation and
adaptive noise reduction.The V100_PTMC is a PTMC,which is compliant with PCIMG2.15/
IEEE1386,IEEE1386.1, and can be integrated into customer’s CompactPCI system.The
V100_PTMC also features ethernet ports and local_CT Bus on board. And can handle
IP TO IP transcoding or IP TO TDM transcoding.
The V100_PTMC is composed a core module and a PTMC extender board.
The core module contains Vocallo DSP ,Ram,Flash,PowerSupply ,UART,2 Giga Macs and
TDM bus interfaces. The extender PTMC board contains PMC connectors,Giga NIC, Glue
,Dip Switch,front panel RJ45 interface.it connects core module and PCC/PTxCC.
Vocallo DSP and core module
The Vocallo DSP,which is used to address transcoding, is located in the core
module,The media flow enters and exits through inherent Mac interfaces/TDM Bus
interface.The control flow enters and exits through inherent Mac interfaces.
Giga NIC
The Giga NIC located in extender PMC board bridges
through PCI Bus to the vocallo DSP through Eth1.
the host located in PCC/PTxCC
Front panel RJ45
The front panel RJ45 in extender PMC board supports to provide the packet
interface to access the DSP. In some applications,the remote host can communicate
the Vocallo DSP through the front panel RJ45 interface.The interface is enable except
PT5MC option is chosen.
P4 in PTMC connectors
The P4 is another packet interface to access the DSP.This interface is enable
when PT5MC option is chosen.
PTMC connectors
There are four PTMC connectors,which are Compliant with PCIMG2.15(PTMC)
electrical specification and IEEE1386,IEEE1386.1(PMC)mechanical specifications,
located in V100_PTMC.
11
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Figure 3 PMC Connectors in V100_PTMC
The following tables are the connectors Pin Assignments.
Table 2: P1,P1 Assignments
12
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Table 3: P3 Assignments
13
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Table 4: P4 Assignments
Glue
The glue located in extender PMC board bridges the UART and H.110 bus in PMC
carrier/PTxCC to the Uart and TDM bus in core module.
14
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Table 5: Map List between core module and PMC Connectors
* For more flexible TDM customization ,the source code and object code of glue
can be acquired from OpenVox.The customers can rebuild the glue to suit their
PTCC.
Dip Switch
The Dip switch located in extender PMC board is for configuring the V100_PTMC
options.
The following is the Dip Switch Outline.
15
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Figure 4 Dip Switch
Pin 1 is Vocallo DSP Device ID option. If it is switched ON, the DSP ID is 0x
FE,If it is switched Off(default) ,the DSP ID is 0x FF. If dual V100_PTMCs are
provided on the same PCC/PTCC, one of them should be set to 0x FE ,and the other
should be set to 0x FF.
Pin 2 is TDM clock of Vocallo DSP enable option.If it is switched ON,The TDM
clock is disable(default).If it is switched Off,the TDM clock is enable.
Pin3-Pin5 are PTMC configuration option.The V100_PTMC supports 3 PTMC
configuration(PT2MC,PT3MC,PT5MC) via Pin3,Pin4,Pin5. On means 1,Off means 0.
If Pin3-Pin5 is set to 010, PT2MC (default)configuration is enable. If Pin3-Pin5
is set to 011, PT3MC configuration is enable. If Pin3-Pin5 is set to 101, PT5MC
configuration is enable.
Figure 5 Front panel
LED indicator
There are 4 LEDs located in front panel.(See Figure 5)
The T/R blinking indicates the front panel RJ45 packet interface or P4 in PTMC
connectors packet interface is transmitting or receiving.
The LNK light indicates he front panel RJ45 packet interface or P4 in PTMC
connectors packet interface is linking up.
The CFG2/3 is PT2MC/PT3MC indicator. Red light means V100_PTMC is PT2MC option
and the PTCC is PT2CC compliant.Green light means V100_PTMC is PT3MC option and the
PTCC is PT3CC compliant.
The CFG5 is PT5MC indicator. Green light means V100_PTMC is PT5MC option and
the PTCC is PT5CC compliant.
16
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Chapter 3 Hardware installation
1. Make sure the V100_PTMC is compatible with your PCC/PTCC. V100_PTMC can be worked
with PCC32,PCC64,PT2CC,PT3CC and PT5CC theoretically. In practice,Electrical
compatibility of combinations that include user-defined I/O,whether PMC or PTMC
compliant,must be checked carefully. The V100_PTMC I/O pins is 5V tolerant for
3.3V. It is recommended that you ask OpenVox whether the V100_PTMC suit your
application.
* V100_PTCCEVB that is a PCI card for evaluating V100_PTMC is available.
2. Unpacking
Inspect the packing container for any damage. If this container appears damaged,
immediately contact the company responsible for the shipping and report the damage
before opening and unpacking the container. It is recommended that you also notify
OpenVox.
3. Make sure the PCC/PTxCC that have V100_PTMC installed complies with the country
specific safety regulations.
4. Power off your PCC/PTxCC and unplug it from its AC power source.
5. Attach a Anti-static Wrist Strap to your wrist.
6. Configuring the Dip Switch to the right position.
7. Open the cover of the ComppactPCI Platform.
8. Remove the filler plate from the front panel of the PCC/PTxCC .(See Figure 6)
9. The V100_PTMC must be positioned with care to avoid damaging components against
the voltage keying post.
10. The V100_PTMC bezel enters the front panel of the PCC/PTxCC into alignment with
the signal connectors. (See Figure 6)
11. Mounting the screws. (See Figure 6)
12. Replace the cover of the PCC/PTxCC.
13. Plug the UTP cable into RJ45 Jack of the V100 only if the Media/Control Path
is the front panel RJ45/UTP.
14. Plug the AC power source.and follow the software installation manual.
Figure 6 View V100_PTMC Installation
17
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049
Hardware installation Manual
Chapter 4 References
•
•
•
•
•
•
•
•
•
•
•
ECTF H.110 Hardware Compatibility Specification: CT Bus revision 1.0
IEEE P1386 2.4a March 21, 2001 Common Mezzanine Card Family
IEEE P1386.1 Draft 2.4 Jan. 12, 2001 PCI Mezzanine Cards, PMC
PCI Local Bus Specification Revision 2.2
PICMG 2.15 1.0 PCI Telecom Mezzanine/Carrier Card Specification
PICMG 2.15 R1.0:ECN 2.15-1.0-001 10/100/1000 Ethernet MDI Links on PTMC
PICMG 2.16 R1.0 CompactPCI Packet Switch Backplane
PICMG 2.5 R1.0 Computer Telephony
PICMG 2.9 R1.0 CompactPCI System Management Specification
VITA 32 -199x Processor PMC Standard Draft 0.41 Sept. 8, 2000
VITA 39 -2003(R2009) PCI-X Auxiliary Standard for PMCs and Processor PMCs
FCC NOTE:
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC CAUTION
changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
18
OpenVox Communication Co. Limited.
URL: www.openvox.cn
Tel: +86-755-83535362，82535462，82535095 Fax: +86-755-8346049

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Producer                        : Acrobat Distiller 7.0 (Windows)
Creator Tool                    : PScript5.dll Version 5.2
Modify Date                     : 2012:02:08 09:51:33+08:00
Create Date                     : 2011:12:01 15:29:47+08:00
Metadata Date                   : 2012:02:08 09:51:33+08:00
Format                          : application/pdf
Title                           : Microsoft Word - V100_ptmc-Hardware-Install.doc
Creator                         : wangxiang
Document ID                     : uuid:93781bed-f97f-4326-ae33-3dd71944373a
Instance ID                     : uuid:f389948a-0ce9-4b1d-95ae-3dac00c497bd
Page Count                      : 18
Author                          : wangxiang

EXIF Metadata provided by EXIF.tools