Opticon Sensors Europe EE201 Opticon EE201 User Manual OPH 1004 Portable Terminal
Opticon Sensors Europe BV Opticon EE201 OPH 1004 Portable Terminal
Contents
- 1. Users Manual
- 2. User manual
Users Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2114247 |
| Application ID | XBX8f/hat0TkOlza7eqPuw== |
| Document Description | Users Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 49.61kB (620113 bits) |
| Date Submitted | 2013-11-08 00:00:00 |
| Date Available | 2013-11-11 00:00:00 |
| Creation Date | 2013-11-08 08:49:06 |
| Producing Software | Adobe PDF Library 10.0 |
| Document Lastmod | 2013-11-08 08:49:12 |
| Document Title | OPH 1004 Portable Terminal |
| Document Creator | Acrobat PDFMaker 10.0 for Word |
| Document Author: | Kathy Bruni |
Electronic shelf label EE201 The EE201 is an e-paper based electronic shelf label with a screen size of 2” and with 802.15.4 based wireless communication. Preliminary Specifications Manual EE201 Specifications Manual All information subject to change without notice. Document History Model Number: EE201 Specification Number: Edition: 1.2 Original Spec Number: Date: August 2, 2013 Copyright 2012 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 1217, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184 SUPPORT USA Europe Phone: 800-636-0090 Email: support@opticonusa.com Email: support@opticon.com Web: www.opticonusa.com Web: www.opticon.com EE201 Specifications manual Contents 1. Abstract ..................................................................................................................................... 5 2. Overview ................................................................................................................................... 5 3. Physical Features ..................................................................................................................... 6 3.1. Dimensions ....................................................................................................................... 6 3.2. Weight ............................................................................................................................... 6 4. Environmental Specifications .................................................................................................. 6 4.1. Operating Temperature and Humidity ................................................................................ 6 4.2. Storage Temperature and Humidity ................................................................................... 6 4.3. Static Electricity ................................................................................................................. 6 4.4. Drop resistance. ................................................................................................................ 6 5. Controls..................................................................................................................................... 7 6. Electrical Specifications........................................................................................................... 7 6.1. Electrical Characteristics ................................................................................................... 7 6.2. Battery ............................................................................................................................... 7 7. Radio Specifications ................................................................................................................ 8 7.1. Protocol ............................................................................................................................. 8 7.1.1. The physical layer ...................................................................................................................... 8 7.1.2. The medium access control layer .............................................................................................. 8 7.2. Security ............................................................................................................................. 8 8. Labeling..................................................................................................................................... 9 8.1. Product label ..................................................................................................................... 9 8.2. Shipment box labels ........................................................................................................ 10 9. Accessories ............................................................................................................................ 11 10. Packaging Specifications....................................................................................................... 11 10.1. Individual Packaging Specification................................................................................... 11 10.2. Collective Packaging Specification .................................................................................. 12 11. Regulatory Compliance .......................................................................................................... 13 11.1. Product Safety ................................................................................................................. 13 11.2. EMC ................................................................................................................................ 13 11.3. RoHS .............................................................................................................................. 13 12. Safety....................................................................................................................................... 14 12.1. Shock .............................................................................................................................. 14 12.2. Temperature Conditions .................................................................................................. 14 12.3. Foreign Materials ............................................................................................................. 14 12.4. Battery ............................................................................................................................. 14 EE201 Specifications manual 12.5. Other ............................................................................................................................... 14 13. Mechanical Drawing ............................................................................................................... 15 Table of Figures Figure 1: Dimensions .................................................................................................................. 6 Figure 2: product label ................................................................................................................ 9 Figure 3: product label dimensions ............................................................................................. 9 Figure 4: shipment box labels ................................................................................................... 10 Figure 5: HL hinged shelftaker for data strips. ........................................................................... 11 Figure 6: Individual packaging .................................................................................................. 11 Figure 7: Collective packaging 1 ............................................................................................... 12 Figure 8: Collective packaging 2 ............................................................................................... 12 Figure 9: Mechanical drawing ................................................................................................... 15 EE201 Specifications manual 1. Abstract This manual provides specifications for the EE201 electronic shelf label (hereafter referred to as “ESL”). 2. Overview The EE201 is an E-ink based ESL with a 2.4GHz radio for data communication. This product uses Direct Sequence Spread Spectrum RF technology that allows for an ultra-low power consumption combined with a reduced sensitivity to background noise. That means less interference by other radios that operate in the 2.4GHz band. The radio protocol that is used is based on the IEEE 802.15.4 standard that specifies the physical layer and media access control for low-rate wireless personal area networks. The protocol is entirely implemented, except for some small changes that have all to do with the connection protocol to a base station. When the base station is not available the EE201 switches to a non-802.15.4 standard to lower the power. That is especially meaningful when the EE201 is not being used for a prolonged period of time (e.g. during shipping) A development kit is available that consists out of a base station and several EE201 tags plus a PC demo application that allows people to quickly test the system and makes it easier to integrate this ESL system into an existing back office system. EE201 Specifications manual 3. Physical Features 3.1. Dimensions W 65.7 x H 34.9 x D 13.7 mm Figure 1: Dimensions 3.2. Weight 40 g (including battery) 4. Environmental Specifications 4.1. Operating Temperature and Humidity Temperature: 10 to 50° C Humidity: 20% to 85% RH 4.2. Storage Temperature and Humidity Temperature: -20 to 60° C Humidity: 20% to 85% RH 4.3. Static Electricity Air discharge: ± 8 kV MAX (No malfunction) ± 15 kV MAX (No destruction) Contact discharge: ± 4 kV MAX (No malfunction) ± 8 kV MAX (No destruction) 4.4. Drop resistance. There will be no sign of decreased performance after the following drop test: Drop the ESL from 1.8 M above the concrete floor (6 sides, 3 times each). Scratches or discoloration of the casing do not decrease product performance. EE201 Specifications manual 5. Controls Items Specifications Remarks Type 8051 core 8-bit MCU Internal flash ROM 96KB Internal RAM 6 KB Clock frequency 32 MHz Active area W 45.8 x H 22.0 mm Number of dots W 200 x H 96 Dot pitch 111 Horizontal 111 Vertical Modulation DSSS Frequency 2394 ~ 2507 MHz Baud rate 250 Kbits / second CPU LCD Radio Dots per Inch Globally approved 2.4GHz band. 6. Electrical Specifications 6.1. Electrical Characteristics Conditions: Operating voltage 3.0V unless otherwise specified Parameter Typ Unit Operating voltage 2.0–3.3 Sleep current <1 uA Poll time 20 seconds Remarks Lithium primary battery When the transmitter and receiver are idle See below The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals (called the poll time) and it then transmits a poll request to the base station. When the base station has no data to send, it just acknowledges the poll after which the ESL immediately goes back to sleep. The poll rate is configurable and is set to 20 seconds by default. A higher poll rate will decrease the power consumption but will increase the response time. 6.2. Battery The power is supplied to the ESL by two coin shaped Lithium CR2450 batteries: • Nominal capacity: 1200 mAh (two times 600mAh) • Nominal voltage: 3.0 V. • Maximum self-discharge rate: <1% per year • Usable time: 7 years minimum (Update frequency: 4 times per day, poll time 20seconds) EE201 Specifications manual 7. Radio Specifications Parameter Min Receiver sensitivity Nominal output power Frequency -3 Typ Max Unit Remarks -97 -89 dBm Over the entire temp. and operating voltage range 4.5 dBm 2507 MHz Over the entire temp. and operating voltage range dB Signal strength indication that can be reported to the base station 2394 Transfer rate 250Kbit/s RSSI range 100 7.1. Protocol Modified 802.15.4 (Physical layer and Media Access Control layer). 7.1.1. The physical layer The physical layer (PHY) provides the data transmission service, as well as the interface to the physical layer management entity, which offers access to every layer management function and maintains a database of information on related personal area networks. Thus, the PHY manages the physical RF transceiver and performs channel selection and energy and signal management functions. It operates on the above mentioned frequency band. The PHY layer is 100% compliant and is based on direct sequence spread spectrum (DSSS) technique with a transfer rate of 250 kbit/s. 7.1.2. The medium access control layer The medium access control (MAC) layer enables the transmission of MAC frames through the use of the physical channel. Besides the data service, it offers a management interface and itself manages access to the physical channel. It also controls frame validation, guarantees time slots and handles node associations. Finally, it offers hook points for secure services. The EE201 does not make use of the optional network beaconing, instead it used a polling mechanism to increase power efficiency. Some changes are made to the standard to allow for more efficient data frames and better power efficiency, especially when nodes are not connected to a base station. 7.2. Security The 802.15.4 standard 128-bit AES encryption is supported. A secure method for key management is implemented as well. The encryption is optional though and can be configured via the base station. By default the radio traffic is unencrypted. EE201 Specifications manual 8. Labeling 8.1. Product label The product label is affixed to the ESL as shown below. Figure 2: product label The barcode shows the product serial number. This is a ‘B’ is followed by 10 hexadecimal digits. This serial number is the same as the MAC address in the ESL-label, with the first 6 digits replaced by a ‘B’. Material: Base + laminate protection against wear. Base: PP film, thickness 80µm, backing with glue. Laminate: PET film, clear, thickness 25µm. The dimensions of the product label are as follows: Figure 3: product label dimensions EE201 Specifications manual 8.2. Shipment box labels The shipment box labels are made from plain paper and are meant to show the regulatory information on the shipment box as well as the quantity in the box. The label design is shown below. The labels are 150mm*95mm and are made from plain paper with adhesive backing. Figure 4: shipment box labels Label A shows the PO number, the Quantity in the box and the serial number range, all encoded in barcodes as shown. In case there are two or less missing serial numbers, only label A is required. In case there are more than 2 missing serial numbers missing, label B is required to show the rest of the missing serial numbers. 10 EE201 Specifications manual 9. Accessories To mount the ESL onto a rail in a shop, the EE201 can be fitted with a rail attachment system made by HL-display system. This rail attachment accessory can click into a standard rail from HL-Display and rails are available for nearly all brands of shelves. Please consult a dealer for details on their offering. The shelftaker that fits the EE201 is available from Opticon as an accessory. Figure 5: HL hinged shelftaker for data strips. 10. Packaging Specifications 10.1. Individual Packaging Specification The ESL’s do not need to be packed separately. To easily pack them, 30 pcs need to be packed in a plastic molder tray: Figure 6: Individual packaging 11 EE201 Specifications manual 10.2. Collective Packaging Specification Pack the tray with 30 EE201’s in a plastic bag, fold the open end of the bag and fix it with a piece of tape. Figure 7: Collective packaging 1 Put 10 stacks, containing 300 ESL’s inside a box and stick the shipment box label on the indicated position. Figure 8: Collective packaging 2 Note: The “RO” mark labeled on the package tray or package box guarantees that the applicable product has passed our test of RoHS restrictions compliance (the restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC). However, this document does not have any legal weight in the European Union. 12 EE201 Specifications manual 11. Regulatory Compliance 11.1. Product Safety EN60950-1:2001 IEC60950-1:2001 11.2. EMC EN55022 EN55024 Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference and 2) this device must accept any interference received, including interference that may cause undesired operation of the device. 11.3. RoHS RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95 EC. 13 EE201 Specifications manual 12. Safety Handle this product carefully. Do not deliberately subject it to any of the following. 12.1. Shock Do not throw or drop the ESL. Do not place heavy objects on the ESL. 12.2. Temperature Conditions Do not use the ESL at temperatures outside the specified range. Do not pour boiling water on the ESL. Do not throw the ESL into the fire. Do not leave the ESL on the dashboard of a car. 12.3. Foreign Materials Do not immerse the ESL in liquids. Do not subject the ESL to chemicals. 12.4. Battery Replace the ESL when its lifetime has expired. This is after max. 10 years of operation or sooner when the battery is depleted. If the battery is depleted sooner, replace the ESL and treat it as chemical waste and dispose of it according to local regulations. 12.5. Other Do not disassemble this product. The ESL may be damaged by high voltage discharges. 14 EE201 Specifications manual 13. Mechanical Drawing Figure 9: Mechanical drawing 15
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : Yes Author : Kathy Bruni Create Date : 2013:11:08 08:49:06+01:00 Modify Date : 2013:11:08 08:49:12+01:00 Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 5.2-c001 63.139439, 2010/09/27-13:37:26 Metadata Date : 2013:11:08 08:49:12+01:00 Creator Tool : Acrobat PDFMaker 10.0 for Word Document ID : uuid:0cf2c0f6-fe32-438a-9fd4-cc01964c3ae0 Instance ID : uuid:26830b87-a16a-475d-bef6-5cdf1e4f8269 Subject : 2 Format : application/pdf Title : OPH 1004 Portable Terminal Creator : Kathy Bruni Producer : Adobe PDF Library 10.0 Source Modified : D:20131108074846 Company : Microsoft Tag Doc Home : 2018936571 Tag New Review Cycle : Tag Ad Hoc Review Cycle ID : -2086610877 Tag Email Subject : NLV 1001 Technical Writing Tag Author Email : DOliver@opticonusa.com Tag Author Email Display Name : Donah Oliver Tag Reviewing Tools Shown Once : Page Layout : OneColumn Page Count : 15EXIF Metadata provided by EXIF.tools