Opticon Sensors Europe EE750R ESL Electronic Shelf Label User Manual EE 750 Electronics Shelf Label

Download:
Mirror Download [FCC.gov]
Document ID	3654274
Application ID	zmNRul/ofG/NPPIPCinqyA==
Document Description	Spec manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	92.9kB (1161284 bits)
Date Submitted	2017-11-27 00:00:00
Date Available	2018-05-26 00:00:00
Creation Date	2017-07-17 13:01:18
Producing Software	Microsoft® Word 2016
Document Lastmod	2017-07-17 13:01:18
Document Title	EE-750 Electronics Shelf Label
Document Creator	Microsoft® Word 2016
Document Author:	Kees Stoop

Electronic shelf label
EE-750R
EE-750R
The EE-750R is a black/white/red E-ink based
electronic shelf label with a screen size of 7.5” and
with 802.15.4 based wireless communication.
Specifications Manual
Opticon
EE-750R
Specifications Manual
All information subject to change without notice.
Document History
Model Number:
EE-750R
Specification Number:
Edition:
1.0
Original Spec Number:
Date:
April 7, 2017
Copyright 2017 Opticon Sensors Europe BV. All rights reserved.
This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any
electronic or machine readable form without prior written consent of Opticon Sensors Europe BV .
Limited Warranty and Disclaimers
Please read this manual carefully before installing or using this product.
Serial Number
A serial number appears on all Opticon products. This official registration number is directly related to the device
purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the
warranty.
Warranty
Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and
workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in
materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by
modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under
warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,
consequential or incidental damages arising out of use or inability to use both the hardware and software, even if
Opticon has been informed about the possibility of such damages.
Packaging
The packing materials are recyclable. We recommend that you save all packing material to use should you need to
transport your product or send it for service. Damage caused by improper packaging during shipment is not covered by
the warranty.
Trademarks
Trademarks used are the property of their respective owners.
Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 1217, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184
SUPPORT
USA
Europe
Phone: 800-636-0090
Phone: +31235692728
Email: support@opticonusa.com
Email: support@opticon.com
Web: www.opticonusa.com
Web: www.opticon.com
EE-750R Specifications manual
Contents
1. Abstract ..................................................................................................................................... 5
2. Overview ................................................................................................................................... 5
3. Physical Features ..................................................................................................................... 6
3.1. Dimensions ....................................................................................................................... 6
3.2. Weight ............................................................................................................................... 6
4. Environmental Specifications .................................................................................................. 6
4.1. Operating Temperature and Humidity ................................................................................ 6
4.2. Storage Temperature and Humidity ................................................................................... 7
4.3. Static Electricity ................................................................................................................. 7
5. Controls..................................................................................................................................... 7
6. Electrical Specifications........................................................................................................... 7
6.1. Power and battery ............................................................................................................. 7
6.2. Radio Specifications .......................................................................................................... 8
6.3. Radio Protocol ................................................................................................................... 8
6.3.1.
The physical layer ...................................................................................................................... 8
6.3.2.
The medium access control layer .............................................................................................. 8
6.3.3.
Security ...................................................................................................................................... 8
7. Labeling..................................................................................................................................... 9
7.1. Product label ..................................................................................................................... 9
7.2. Shipment box label .......................................................................................................... 10
8. Accessories ............................................................................................................................ 11
9. Packaging Specifications....................................................................................................... 11
10. Regulatory Compliance .......................................................................................................... 13
10.1. Product Safety ................................................................................................................. 13
10.2. EMC ................................................................................................................................ 13
10.3. WEEE.............................................................................................................................. 13
10.4. RoHS .............................................................................................................................. 14
11. Safety....................................................................................................................................... 15
11.1. Shock .............................................................................................................................. 15
11.2. Temperature Conditions .................................................................................................. 15
11.3. Foreign Materials ............................................................................................................. 15
11.4. Battery ............................................................................................................................. 15
11.5. Disposal .......................................................................................................................... 15
11.6. Other ............................................................................................................................... 15
12. Mechanical Drawing ............................................................................................................... 16
EE-750R Specifications manual
Table of Figures
Figure 1: Dimensions .................................................................................................................. 6
Figure 2: product label ................................................................................................................ 9
Figure 3: product label dimensions ............................................................................................. 9
Figure 4: shipment box label ..................................................................................................... 10
Figure 5: Packing step 1: Put 6 pcs EE-750R in a plastic tray ................................................... 11
Figure 6: Packing step 2: Add two bags of silica and put a bag around the tray ........................ 11
Figure 7: Packing step 3: Stack 10 trays (60 ESL’s) and put this into a shipping box ................ 12
Figure 8: Mechanical drawing ................................................................................................... 16
EE-750R Specifications manual
1. Abstract
This manual provides specifications for the EE-750R electronic shelf label (hereafter referred to
as “ESL”).
2. Overview
The EE-750R is an Electronics Shelf Label with a 2.4GHz radio for data communication. The
product has a 3-color E-ink based e-paper display with black, white and red pixels. This product
uses Direct Sequence Spread Spectrum RF technology that allows for an ultra-low power
consumption combined with a reduced sensitivity to background noise. That means less
interference by other radios that operate in the 2.4GHz band. The radio protocol that is used is
based on the IEEE 802.15.4 standard that specifies the physical layer and media access control
for low-rate wireless personal area networks. The protocol is entirely implemented, except for
some small changes that have all to do with the connection protocol to a base station. When the
base station is not available the EE-750R switches to a non-802.15.4 standard to lower the
power. That is especially meaningful when the EE-750R is not being used for a prolonged
period of time (e.g. during shipping)
The EE-750R is intended to be operated in combination with a base station such as the EBS-40
which can control a large number of EE-750R and other types of ESL of the same family such
as EE-202 and EE-420.
EE-750 Specifications manual
3. Physical Features
3.1. Dimensions
(WxHxD): 179.1 x 125.8 x 15.8 mm
Figure 1: Dimensions
3.2. Weight
150 g (including batteries) TBD
4. Environmental Specifications
4.1. Operating Temperature and Humidity
Temperature: 0 to 40° C
Humidity: 30% to 70% RH
Warning: Make sure to use the EE-750R under the recommended (green) combinations
of temperature and humidity and never use it under the orange marked conditions.
Recommended
temp./humidity
Temp.
Relative Humidity (%)
20 25 30 35 40 45 50 55 60 65 70 75 80
10
15
20
25
30
35
40
45
50
55
60
EE-750 Specifications manual
4.2. Storage Temperature and Humidity
Temperature: -20 to 40° C
Humidity: 30% to 70% RH
4.3. Static Electricity
Air discharge:
± 8 kV MAX (No malfunction)
Contact discharge:
± 4 kV MAX (No malfunction)
5. Controls
Items
Specifications
Remarks
Type
8-bit
ROM
256KB
RAM
8 KB
Clock frequency
32 MHz
Active area
W 84.8 x H 63.6 mm
Number of dots
W 400 x H 300
Dot pitch
0.21 x 0.21 (107dpi)
Modulation
DSSS
Frequency
2405-2480 MHz
Baud rate
250 Kbits / second
CPU
LCD
Radio
mm
Globally approved
2.4GHz band.
6. Electrical Specifications
6.1. Power and battery
Parameter
Typ
Unit
Operating voltage
Battery life
Sleep current
Poll rate
3.0
<1
>5
Years
µA
Per sec.
Remarks
4x Alkaline AAA size battery
Reference: Panasonic LR03XWA 2 updates per day
When the transmitter and receiver are idle
See below
The ESL is in sleep mode almost the entire time. The device wakes up at regular intervals
(called the poll time) and it then transmits a poll request to the base station. When the base
station has no data to send, it just acknowledges the poll after which the ESL immediately goes
back to sleep. The poll rate is configurable and is set to 20 seconds by default. A higher poll
rate will decrease the power consumption but will increase the response time.
The power is supplied to the EE-750R by four replaceable Alkaline AAA size batteries (not
included). The typical operation time on a set of batteries is 5 years when using quality alkaline
batteries, based on a poll rate of 20 and on average two display updates per day.
EE-750 Specifications manual
6.2. Radio Specifications
Parameter
Min
Receiver sensitivity
Nominal output power
Frequency
-3
Typ
Max
Unit
Remarks
-97
-89
dBm
Over the entire temp. and
operating voltage range
4.5
dBm
2480
MHz
Over the entire temp. and
operating voltage range
dB
Signal strength indication
that can be reported to the
base station
2405
Transfer rate
250Kbit/s
RSSI range
100
6.3. Radio Protocol
Modified 802.15.4 (Physical layer and Media Access Control layer).
6.3.1. The physical layer
The physical layer (PHY) provides the data transmission service, as well as the interface
to the physical layer management entity, which offers access to every layer management
function and maintains a database of information on related personal area networks.
Thus, the PHY manages the physical RF transceiver and performs channel selection and
energy and signal management functions. It operates on the above mentioned frequency
band. The PHY layer is 100% compliant and is based on direct sequence spread
spectrum (DSSS) technique with a transfer rate of 250 kbit/s.
6.3.2. The medium access control layer
The medium access control (MAC) layer enables the transmission of MAC frames through
the use of the physical channel. Besides the data service, it offers a management
interface and itself manages access to the physical channel. It also controls frame
validation, guarantees time slots and handles node associations. Finally, it offers hook
points for secure services. The EE-750R does not make use of the optional network
beaconing, instead it used a polling mechanism to increase power efficiency. Some
changes are made to the standard to allow for more efficient data frames and better
power efficiency, especially when nodes are not connected to a base station.
6.3.3. Security
The 802.15.4 standard 128-bit AES encryption is supported. A secure method for key
management is implemented as well. The encryption is optional though and can be
configured via the base station. By default, the radio traffic is unencrypted.
EE-750 Specifications manual
7. Labeling
7.1. Product label
The product label is affixed to the ESL as shown below.
Figure 2: product label
The barcode shows the product serial number.
The ‘B’ is followed by 10 hexadecimal digits. These correspond to the MAC address of the unit.
Material: Base + laminate protection against wear.
Base: PP film, thickness 80µm, backing with glue.
Laminate: PET film, clear, thickness 50µm.
The dimensions of the product label are as follows:
10
35
Figure 3: product label dimensions
EE-750 Specifications manual
7.2. Shipment box label
The shipment box label is meant to show the number of labels in a box and their serial
numbers. Also information about the software versions and the order number is added.
The labels are 150mm*95mm and are made from plain paper with adhesive backing. For
more information, please check ShipmentBoxLabel_spec_rev1
Barcode label for shipping box
Figure 4: shipment box label
10
EE-750 Specifications manual
8. Accessories
Accessories, for instance for mounting, may be optionally available. Please contact Opticon for
information.
9. Packaging Specifications
Figure 5: Packing step 1: Put 6 pcs EE-750R in a plastic tray
Figure 6: Packing step 2: Add two bags of silica and put a bag around the tray
11
Air tight
sealing
Molded tray
Plastic bag
Cardboard
Put a plastic bag around the 10 trays.
Stack 10 trays (60 ESLs)
Attach two bags of Silica el (2 grameach) at the bottom of a tray. Then put a plastic
bag around it and seal it air tight. Finallyput a cardboard plate on top of the tray.
Put the stack of 10 trays
into the carton box
EE-750 Specifications manual
Figure 7: Packing step 3: Stack 10 trays (60 ESL’s) and put this into a shipping box
12
EE-750 Specifications manual
10. Regulatory Compliance
10.1. Product Safety
IEC 60950-1:2005 2nd +Am 1:2009 + Am 2:2013
10.2. EMC
EN 55032: 2015 + AC:2016-07
EN 55024: 2010 + A1:2015
RED Directive 2014/53/EU
EN 301 489-1 v2.2.0
EN 301 489 -17 v3.2.0
FCC Part 15 Subpart C Class B
Federal Communications Commission Notices
This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired
operation.
Harmful Interference Notice
This product has been tested and complies with the specifications for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which is found by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna
•
Increase the separation between the equipment or devices
•
Connect the equipment to an outlet other than the receiver's
• Consult a dealer or an experienced radio/TV technician for assistance
Changes or modifications to this equipment that have not been approved by Ruckus Wireless may void the
user's authority to operate this equipment.
RF Exposure Information
This product complies with FCC radiation exposure limits set forth an uncontrolled environment.
10.3. WEEE
Waste of Electrical and Electronic Equipment Directive, 2012/19/EU.
The use of this symbol indicates that this product may not be treated as household waste. By ensuring this
product is disposed of correctly, you will help prevent potential negative consequences for the environment
and human health, which could otherwise be caused by inappropriate waste handling of this product. For
more detailed information about recycling of this product, please contact your local city office, your household
waste disposal service or the shop where you purchased this product.
13
EE-750 Specifications manual
10.4. RoHS
RoHS: The restriction of the use of certain hazardous substances in electrical and
electronic equipment, 2011/65 EC
14
EE-750 Specifications manual
11. Safety
Handle this product carefully. Do not deliberately subject it to any of the following.
11.1. Shock
Do not throw or drop the ESL.
Do not place heavy objects on the ESL.
11.2. Temperature Conditions
Do not use the ESL at temperatures outside the specified range.
Do not pour boiling water on the ESL.
Do not throw the ESL into the fire.
Do not leave the ESL on the dashboard of a car.
11.3. Foreign Materials
Do not immerse the ESL in liquids.
Do not subject the ESL to chemicals.
11.4. Battery
Replace the battery when its lifetime has expired. The typical lifetime of a set of batteries
is 5 years when using quality alkaline batteries. Treat the batteries as chemical waste and
dispose of them according to local regulations.
11.5. Disposal
When discarding the product, treat it as chemical waste and dispose of it according to
local regulations.
11.6. Other
Do not disassemble this product, other than opening the battery compartment to
exchange the batteries.
The ESL may be damaged by high voltage discharges.
15
EE-750 Specifications manual
12. Mechanical Drawing
Figure 8: Mechanical drawing
16

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : No
Page Count                      : 16
Language                        : en-US
Tagged PDF                      : Yes
XMP Toolkit                     : 3.1-701
Producer                        : Microsoft® Word 2016
Title                           : EE-750 Electronics Shelf Label
Creator                         : Kees Stoop
Creator Tool                    : Microsoft® Word 2016
Create Date                     : 2017:07:17 13:01:18+02:00
Modify Date                     : 2017:07:17 13:01:18+02:00
Document ID                     : uuid:D9D7D0D8-4F39-4582-8371-4D45CCCC5758
Instance ID                     : uuid:D9D7D0D8-4F39-4582-8371-4D45CCCC5758
Author                          : Kees Stoop

EXIF Metadata provided by EXIF.tools