Opticon Sensors Europe OPL9813 Data Collector with GPS and Bluetooth User Manual OPL 9813 Specification Manual

Opticon Sensors Europe BV Data Collector with GPS and Bluetooth OPL 9813 Specification Manual

UserManual.wiki >

Opticon Sensors Europe >

OPL9813 User Manual

User Manual

Data Collector with GPS & BluetoothOPL9813The OPL 9813 is a laser data collector featuring GPS(Global Positioning System) feature, Bluetooth 2.1communication and time stamp functionality.PreliminarySpecifications Manual

OpticonOPL 9813Preliminary Specifications Manual2All information subject to change without notice.Document HistoryModel Number: OPL 9813 Specification Number:Edition: 2Original Spec Number:Date: 2012-02-23Copyright 2012 Opticon. All rights reserved.This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to anyelectronic or machine readable form without prior written consent of Opticon.Limited Warranty and DisclaimersPLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THEPRODUCT.Serial NumberA serial number appears on all Opticon products. This official registration number is directly related to the devicepurchased. Do not remove the serial number from your Opticon device. Removing the serial number voids thewarranty.WarrantyUnless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials andworkmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective inmaterials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused bymodifications made by a customer. In such cases, standard repair charges will apply. If a product is returned underwarranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect,consequential or incidental damages arising out of use or inability to use both the hardware and software, even ifOpticon has been informed about the possibility of such damages.PackagingThe packing materials are recyclable. We recommend that you save all packing material to use should you need totransport your data collector or send it for service. Damage caused by improper packaging during shipment is notcovered by the warranty.TrademarksTrademarks used are the property of their respective owners.Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48-446-1184SUPPORTUSA EuropePhone: 800-636-0090Email: support@opticonusa.com Email: support@opticon.comWeb: www.opticonusa.com Web: www.opticon.com

OpticonOPL 9813Preliminary Specifications Manual3Contents1. Abstract.....................................................................................................................................52. Overview ...................................................................................................................................53. Physical Features.....................................................................................................................63.1. Dimensions .......................................................................................................................63.2. Weight...............................................................................................................................63.3. Color .................................................................................................................................64. Environmental Specifications..................................................................................................64.1. Operating Temperature and Humidity................................................................................64.2. Storage Temperature and Humidity...................................................................................64.3. IP (dust/water) rating .........................................................................................................64.4. Drop ..................................................................................................................................64.5. Ambient Light Immunity.....................................................................................................75. Controls.....................................................................................................................................86. Electrical Specifications...........................................................................................................86.1. Main Battery......................................................................................................................86.2. Battery Operating Time and Charging Time ......................................................................87. Optical Specifications ..............................................................................................................97.1. Laser Scan Specifications .................................................................................................98. Technical Specifications..........................................................................................................98.1. Print Contrast Signal (PCS)...............................................................................................98.2. Minimum Resolution..........................................................................................................98.3. Scan Area and Resolution...............................................................................................108.3.1. Depth of Field...........................................................................................................................108.4. Pitch, Skew, and Tilt........................................................................................................118.4.1. Pitch Angle...............................................................................................................................118.4.2. Skew Angle and Dead Zone ....................................................................................................128.4.3. Tilt Angle ..................................................................................................................................138.5. Curvature ........................................................................................................................149. Interface Specifications..........................................................................................................149.1. Bluetooth.........................................................................................................................149.2. Infrared Transmission (IrDA) ...........................................................................................149.3. GPS ................................................................................................................................1510. Serial Number .........................................................................................................................1610.1. Dimensions and location..................................................................................................1610.2. Detailed drawing..............................................................................................................17

OpticonOPL 9813Preliminary Specifications Manual410.3. Serial number..................................................................................................................1710.4. Manufacturing date..........................................................................................................1811. Packaging Specifications.......................................................................................................1911.1. Individual Packaging Specification...................................................................................1911.2. Accessory Specification...................................................................................................2011.3. Collective Packaging Specification ..................................................................................2012. Durability.................................................................................................................................2112.1. Drop Test (without packaging).........................................................................................2112.2. Dust and Drip Proof.........................................................................................................2113. Reliability ................................................................................................................................2114. Regulatory Compliance..........................................................................................................2114.1. Laser Safety....................................................................................................................2114.2. Certifications....................................................................................................................2214.3. RoHS ..............................................................................................................................2214.4. State of California: Perchlorate Best Management Practices...........................................2215. Safety.......................................................................................................................................2315.1. Shock ..............................................................................................................................2315.2. Temperature Conditions..................................................................................................2315.3. Foreign Materials.............................................................................................................2315.4. Other...............................................................................................................................2316. Mechanical Drawing ...............................................................................................................24Table of FiguresFigure 1: Ambient Light Immunity................................................................................................7Figure 2: Depth of field .............................................................................................................10Figure 3: Pitch .......................................................................................................................... 11Figure 4: Skew and dead zone .................................................................................................12Figure 5: Tilt angle ....................................................................................................................13Figure 6: Curvature...................................................................................................................14Figure 7: Name plate and serial number...................................................................................16Figure 8: Name plate and serial number details........................................................................17Figure 9: Individual packaging ..................................................................................................19Figure 10: Collective packaging................................................................................................20Figure 11: Drop test ..................................................................................................................21Figure 12: Mechanical drawing .................................................................................................24

OpticonOPL 9813Preliminary Specifications Manual51. AbstractThis manual provides specifications for the OPL 9813 barcode data collector.2. OverviewThe OPL 9813 is a barcode data collector that contains a compact laser module.This data collector offers efficient scanning performance that is suitable for various businessenvironments and is able to store scanned data and data configured via keyboard input.Infra-red radiation communication is one of communication functions of the OPL 9813.Stored data can be sent to the host computer by IrDA Ver.1.2-compliant infra-red radiationcommunication (using a dedicated cradle).The OPL 9813 is a laser data collector with a GPS (Global Positioning System) feature andclock function. Those extra features of the OPL 9813 make it possible to add location dataand a time stamp to scanned barcode data.Supported symbologies:Linear (1D) Postal 2DJAN/UPC/EAN, incl. add-on Chinese Post Composite CodesCodabar/NW-7 Korean Postal Authority Code MicroPDF417*Code 11 PDF417*Code 39Code 93Code 128GS1-128 (EAN-128)GS1 Databar (RSS)IATAIndustrial 2of5Interleaved 2of5ISBN-ISSNMatrix 2of5MSI/PlesseyS-CodeTelepenTri-OpticUK/Plessey* Requires use of an external library.

OpticonOPL 9813Preliminary Specifications Manual6The OPL 9813 can use a variety of cradles:CRD 9723 single bay cradle (1 x charging, 1 x communication)CRD 9723 multi bay cradle (5 x charging, 1 x communication)CRD 9723 multi bay cradle (5 x charging, 5 x communication)CRD 9722 single bay cradle (1 x charging, no communication)CRD 9726 single bay cradle with build-in telephone modem.CRD 9727 single bay cradle with build-in GSM modem.C-language-based development tools are available for application development.3. Physical Features3.1. DimensionsW 44.0 mm x D 22.0 mm x H 140.0 mm3.2. Weight115 g (max.), excluding the lithium-ion battery3.3. ColorBlack4. Environmental Specifications4.1. Operating Temperature and HumidityTemperature: 0 to 40° CHumidity: 20 to 85%4.2. Storage Temperature and HumidityTemperature: -20 to 60° CHumidity: 20 to 90%4.3. IP (dust/water) ratingIP 544.4. Drop1.5m on concrete

OpticonOPL 9813Preliminary Specifications Manual74.5. Ambient Light ImmunityDecoding performance is guaranteed when the range of illumination on a barcodesurface is between zero and the following values:Incandescent light 3,000 lxFluorescent light 3,000 lxSunlight 50,000 lxFigure 1: Ambient Light ImmunityConditionsBarcode Sample: OPTOELECTRONICS Test SamplePCS: 0.9Resolution: 0.25 mmSymbology: 8-digit Code 39Quiet Zone: 10 mmN/W Ratio: 1:2.5Direct light or specular reflection light from a source should be prevented fromentering the acceptance area.Note: α, β and γ respectively represent pitch, skew and tilt. Please see section 8 for how these values are defined.

OpticonOPL 9813Preliminary Specifications Manual85. ControlsItem Specifications RemarksControlsMPU 32-bit microprocessorBuilt-in ROM 512 KBBuilt-in RAM 64 KBExternalmemoryFlash ROM 512 KB (Option: Max. 4 MB)SRAM 512 KB (Option: Max. 2 MB)DisplayLCD NoneDotsBacklightScanningindicators Tricolor LED and buzzerScanningLaser wavelength/output 650 nm / 1mW or lessScanningfrequency 100 times/sClock Real time clock Supports year, month, date, hour, minute andseconds (leap year supported)KeyboardUpTriggerDownSince the OPL9813 is fully programmable, theactual function of these keys is determined bythe installed application.Buzzer Loudness 75 dB(A) or higher6. Electrical Specifications6.1. Main BatteryThe main battery is a lithium-ion secondary battery.Nominal capacity: 1000 mAhBattery charging time: Approximately 3 hours6.2. Battery Operating Time and Charging TimeParameter Specifications NotesBackup battery 3 mAh manganese dioxide batteryCurrentconsumption 1 mA or less (on standby)150 mA or less (when operating) GPS & Bluetooth on.Usable time 50 hours or more (not using GPS)10 hours or more (using GPS)1 scan/5sData hold time 72 hours or more After main battery dischargedNote: Battery life may be shorter than specified above when the quality of the batterypack is degraded.

OpticonOPL 9813Preliminary Specifications Manual97. Optical Specifications7.1. Laser Scan SpecificationsParameter Specification UnitLight-emitting element Red laser diode —Emission wavelength 650 ±10 (25° C) nmLight output 1.0 or less mWScanning method Bi-directional vibration mirror —Scanning speed 100 ±20 scans/sScan angle Scan angle: 54 ±5 °Read angle: 44 (Min) °Resolution 0.127 and above mmNote: Refer to chapter 8, “Technical Specifications,” to read about scanningperformance.8. Technical SpecificationsThe conditions for technical specifications are as follows, unless otherwise specified in eachsection.ConditionsAmbient temperatureand humidity: Room temperature (5 to 35º C)Room humidity (45% to 85% RH)Ambient light: 500 to 900 lxBackground: Barcode = blackSpace = whiteMargin = whiteBackground of label = black8.1. Print Contrast Signal (PCS)PCS=0.45 or higher (over 70% of reflectivity of space and quiet zone).Scanning performance may decline if dirt or scratches mar the optical window. Keepthe optical window clean.8.2. Minimum Resolution0.127 mm

OpticonOPL 9813Preliminary Specifications Manual108.3. Scan Area and Resolution8.3.1. Depth of FieldThe depth of field is measured from the edge of the data collector. Thescanning range is within the circular arc centered on the scan origin.Figure 2: Depth of fieldSymbology Resolution (mm) Decode Depth (mm) PCSCode 39 1.0 60–300 0.9Code 39 0.5 35–210 0.9Code 39 0.25 35–120 0.9Code 39 0.15 35–70 0.9ConditionsBarcode Sample: OPTOELECTRONICS Test SampleN/W ratio: 1:2.5Angle: α = 0°, β = 15°, γ = 0° Curvature: R = ∞

OpticonOPL 9813Preliminary Specifications Manual11Resolution Symbology PCS Quiet Zone Digit1.0 mm Code 39 0.9 25 mm 10.5 mm Code 39 0.9 18 mm 30.25 mm Code 39 0.9 10 mm 80.15 mm Code 39 0.9 7 mm 10Note: dirt or scratches on the mask will degrade scanning performance. Alwayshandle the data collector carefully.8.4. Pitch, Skew, and Tilt8.4.1. Pitch Angleα = ±25° Figure 3: PitchConditionsBarcode Sample: OPTOELECTRONICS Test SampleDistance: 90 mm from the edge of the data collectorLabel: Pitch, Skew AnglePCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39,Quiet Zone = 10 mm, N/W Ratio = 1:2.5Dead Zone, Tilt AnglePCS = 0.9, Resolution = 0.26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mmAngle: Curvature: R = ∞, Skew Angle = β +15° (for measuring Pitch Angle and Tilt Angle)

OpticonOPL 9813Preliminary Specifications Manual128.4.2. Skew Angle and Dead ZoneSkew angle: β = ±50° (Excluding dead zone) Dead zone: β = ±8° (There are some areas in which decoding fails due to specular reflection)Figure 4: Skew and dead zoneConditionsBarcode Sample: OPTOELECTRONICS Test SampleDistance: 90 mm from the edge of the data collectorLabel: Pitch, Skew AnglePCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39,Quiet Zone = 10 mm, N/W Ratio = 1:2.5Dead Zone, Tilt AnglePCS = 0.9, Resolution = 0.26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mmAngle: Curvature: R = ∞, Skew Angle = β +15° (for measuring Pitch Angle and Tilt Angle)

OpticonOPL 9813Preliminary Specifications Manual138.4.3. Tilt Angleγ = ±20° γ=20°γ=20°Figure 5: Tilt angleConditionsBarcode Sample: OPTOELECTRONICS Test SampleDistance: 90 mm from the edge of the data collectorLabel: Pitch, Skew AnglePCS = 0.9, Resolution = 0.25 mm, Symbology = 9-digit Code 39,Quiet Zone = 10 mm, N/W Ratio = 1:2.5Dead Zone, Tilt AnglePCS = 0.9, Resolution = 0.26 mm, Symbology = 13-digit JAN, Quiet Zone = 10 mmAngle: Curvature: R = ∞, Skew Angle = β +15° (for measuring Pitch Angle and Tilt Angle)

OpticonOPL 9813Preliminary Specifications Manual159.2.2. Transmission SpeedDefault transmission speed is set at 115.2 kbps. Other supported baud ratesare 57.6 kbps, 38.4 kbps, 19.2 kbps, 9600 bps, 4800 bps, and 2400 bps.9.3. GPS9.3.1. ModuleThe OPL 9813 is equipped with a GPS (Global Positioning System) moduleplus a compact patch antenna (15 mm X 15 mm)9.3.2. Receiving Frequency1575.42MHz (L1 C/A Code)9.3.3. Receiving Channel66 channels (max)9.3.4. SensitivityAcquisition -148 dBmTracking -165 dBm9.3.5. Time to First Fix (TTFF)TTFF is the time required for a GPS receiver to acquire satellite signals andnavigation data, and calculate a position. It may differ depending on theenvironmental conditions, such as the number of satellites, obstacles betweenthe satellite and the GPS antenna, or multipath conditions.1 second: Hot Start33 seconds: Warm Start35 seconds: Cold Start9.3.6. Position-fix Accuracy3.0 m 2D-RMSValues may differ, depending on the environmental conditions.9.3.7. Baud Rate4800 bps (default) to 115200.9.3.8. ProtocolNMEA-0183 (Default)

OpticonOPL 9813Preliminary Specifications Manual1610. Serial Number10.1. Dimensions and location.Below is the product label with serial number.Figure 7: Name plate and serial number

OpticonOPL 9813Preliminary Specifications Manual1710.2. Detailed drawing10.3. Serial numberBar code: Standard Code 39 plus human readable text printed below the bar code.Bar code height: 4mmBar code data: The serial number. This should match that of the OPL-9813 in the box.The serial number consists out of 6 digits, starts with 000001 and is incremented with oneevery unit that is produced.During production, the serial number is also programmed inside the OPL’s non volatilememory. API functions are available to retrieve that number.Figure 8: Name plate and serial number details

OpticonOPL 9813Preliminary Specifications Manual1810.4. Manufacturing dateThe manufacturing date has to be printed on the label and has the following format:January 2011February 2012March 2013April 2014May 2015June 2016July 2017August 2018SeptemberOctoberNovemberDecember

OpticonOPL 9813Preliminary Specifications Manual1911. Packaging Specifications11.1. Individual Packaging SpecificationPut the data collector in a protective foam bag and place it in an individual packingbox, then place the accessories into the box. Close the box and affix a label to theside of the box. Size of the package after assembly: 165 (W) x 65 (D) x 40 (H) mmFigure 9: Individual packaging

OpticonOPL 9813Preliminary Specifications Manual2011.2. Accessory SpecificationThese accessories are enclosed in an individual package:1 hand strap11.3. Collective Packaging SpecificationPut 135 individually packaged data collectors in a collective packing box.Dimensions (after assembly): 613 mm (W) by 518 mm (D) by 241 mm (H).Stack Order of serial numbers1 1 ~ 52 6 ~ 103 11 ~ 154 16 ~ 205 21 ~ 256 26 ~ 307 31 ~ 358 36 ~ 409 41 ~ 4510 46 ~ 5011 51 ~ 5512 56 ~ 6013 61 ~ 6514 66 ~ 7015 71 ~ 7516 76 ~ 8017 81 ~ 8518 86 ~ 9019 91 ~ 9520 96 ~ 10021 101 ~ 10522 106 ~ 11023 111 ~ 11524 116 ~ 12025 121 ~ 12526 126 ~ 13027 131 ~ 135Figure 10: Collective packagingNote: The “RO” mark labeled on the package tray or package box guarantees that theapplicable product has passed our test of RoHS restrictions compliance (therestriction of the use of certain hazardous substances in electrical and electronicequipment, 2002/95 EC). However, this document does not have any legal weight inthe European Union.

OpticonOPL 9813Preliminary Specifications Manual2112. Durability12.1. Drop Test (without packaging)No malfunction occurred after the following drop test.Drop Test: Drop the data collector from a height of 150 cm onto a concrete floor. Eachside of the data collector impacted the floor three times.Figure 11: Drop test12.2. Dust and Drip ProofIEC IP54Dust PreventionLevel Details5Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interferewith the satisfactory operation of the equipment; complete protection against contact.Water PreventionLevel Details4 Water splashing against the enclosure from any direction shall have no harmful effect.13. ReliabilityMTBF (Mean Time Between Failures) of this product is 10,000 hours.14. Regulatory Compliance14.1. Laser SafetyThe data collector emits laser beams.JIS C6802: 2005: Laser class 2IEC 825-1/EN 60825-1: Laser class 2FDA CDRH Laser class II. Complies with 21 CFR 1040.10 and 1040.11 except fordeviations pursuant to laser notice No. 50 dated June 24, 2007.Class II laser devices are not considered to be hazardous when used for theirintended purpose. Avoid staring into the laser beam.

OpticonOPL 9813Preliminary Specifications Manual2214.2. CertificationsFCC Part 15 Subpart B Class B: This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions: (1) this device may not causeharmful interference, and (2) this device must accept any interference received,including interference that may cause undesired operation.FCC Part 15 Subpart C Clause 247 (Spread spectrum radio systems)Other certifications upon request.14.3. RoHSRoHS: The restriction of the use of certain hazardous substances in electrical andelectronic equipment, 2002/95 EC.14.4. State of California: Perchlorate Best Management PracticesThe batteries on some Opticon products may contain Perchlorate. To comply withCalifornia Perchlorate Best Practice Regulations and the Law for the Promotion ofUtilization of Recyclable Resources (Japan), products that may contain Perchloratematerials should be properly labeled on the exterior of all outer shipping packagesand/or in locations that otherwise satisfy the California Perchlorate Best ManagementPractices.

OpticonOPL 9813Preliminary Specifications Manual2315. SafetyHandle this product carefully. Do not deliberately subject it to any of the following.15.1. ShockDo not throw or drop the data collector.Do not drop or put heavy items on this product.15.2. Temperature ConditionsDo not use the data collector at temperatures outside the specified range.Do not use near heat sources such as radiators, heat registers, stoves, or other typesof devices that produce heat.Do not use in areas exposed to direct sunlight for long periods of time.Do not pinch or forcibly bend the cable, especially at very low temperature.15.3. Foreign MaterialsDo not use the data collector near water or other liquids, as well as in extremely highhumidity.Do not immerse the data collector in liquids.Do not use in dusty environments.Do not subject the data collector to chemicals.Do not insert foreign substances into the device.15.4. OtherDo not attempt to disassemble, modify or update this device.Do not use near microwaves, medical devices, or RF-emitting devices.The data collector may not perform properly in environments when placed near aflickering light, such as a computer monitor, television, etc.The data collector may be damaged by high voltage discharges.

OpticonOPL 9813Preliminary Specifications Manual2416. Mechanical DrawingFigure 12: Mechanical drawing

Navigation menu