Opticon Sensors Europe OPN2005 OPN2005 User Manual SS11017 OPN 2004 ENG1

Opticon Sensors Europe BV OPN2005 SS11017 OPN 2004 ENG1

UserManual.wiki >

Opticon Sensors Europe >

OPN2005 User Manual

Users Manual

OPN-2005 This manual provides specifications for the OPN- 2005 ultra compact data collector. Specifications Manual

2 OPN-2005 Specifications Manual All information subject to change without notice. Document History Model Number: OPN-2005 Specification Number: P1203080 Edition: 1st Original Spec Number: - Date: 2012-11-28 Copyright 2010 Opticon. All rights reserved. This manual may not, in whole or in part, be copied, photocopied, reproduced, translated or converted to any electronic or machine readable form without prior written consent of Opticon. Limited Warranty and Disclaimers PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING OR USING THE PRODUCT. Serial Number A serial number appears on all Opticon products. This official registration number is directly related to the device purchased. Do not remove the serial number from your Opticon device. Removing the serial number voids the warranty. Warranty Unless otherwise agreed in a written contract, all Opticon products are warranted against defects in materials and workmanship for two years after purchase. Opticon will repair or, at its option, replace products that are defective in materials or workmanship with proper use during the warranty period. Opticon is not liable for damages caused by modifications made by a customer. In such cases, standard repair charges will apply. If a product is returned under warranty and no defect is found, standard repair charges will apply. Opticon assumes no liability for any direct, indirect, consequential or incidental damages arising out of use or inability to use both the hardware and software, even if Opticon has been informed about the possibility of such damages. Packaging The packing materials are recyclable. We recommend that you save all packing material to use should you need to transport your scanner or send it for service. Damage caused by improper packaging during shipment is not covered by the warranty. Trademarks Trademarks used are the property of their respective owners. Opticon Inc. and Opticon Sensors Europe B.V. are wholly owned subsidiaries of OPTOELECTRONICS Co., Ltd., 12-17, Tsukagoshi 4-chome, Warabi-shi, Saitama, Japan 335-0002. TEL +81-(0) 48-446-1183; FAX +81-(0) 48- 446-1184 SUPPORT USA Europe Phone: 800-636-0090 Email: support@opticonusa.com Email: support@opticon.com Web: www.opticonusa.com Web: www.opticon.c

3 OPN-2005 Specifications Manual Revision History Specification No. : P1203080 Product name : OPN-2005 Edition Date Page Section Description of Changes First 2012/11/28 - - Initial release

4 OPN-2005 Specifications Manual Contents 1. Abstract ................................................................................................................................. 6 2. Overview ............................................................................................................................... 6 2.1. Product / Model Name ..................................................................................................... 6 2.2. Features .......................................................................................................................... 6 3. Basic Specifications ............................................................................................................. 7 4. Detailed View ........................................................................................................................ 8 5. Optical Specifications .......................................................................................................... 9 5.1. Laser Scanning Specifications ......................................................................................... 9 5.2. Laser Scanning Standards ............................................................................................... 9 5.2.1. Laser Scanning Tilt .................................................................................................... 9 5.2.2. Laser Scanning Curvature ......................................................................................... 9 6. Technical Specifications Barcode Scanner ...................................................................... 10 6.1. Print Contrast Signal (PCS) ........................................................................................... 10 6.2. Minimum Resolution ...................................................................................................... 10 6.3. Supported symbologies: ................................................................................................ 10 6.4. Scan Area and Depth of Field ........................................................................................ 11 6.5. Pitch, Skew, and Tilt ...................................................................................................... 12 6.6. Curvature ....................................................................................................................... 13 7. Interface Specifications ..................................................................................................... 14 7.1. USB ............................................................................................................................... 14 7.1.1. Settings ................................................................................................................... 14 7.1.2. Cable ....................................................................................................................... 14 7.1.3. Connector ................................................................................................................ 14 7.1.4. Interface Circuit ....................................................................................................... 14 7.2. Bluetooth ....................................................................................................................... 15 7.2.1 Module ..................................................................................................................... 15 7.2.2 Specifications ........................................................................................................... 15 8. Product Label ..................................................................................................................... 15 9. Packaging Specifications................................................................................................... 16 9.1. Individual Packaging Specification ................................................................................. 16 9.2. Collective Packaging Specification ................................................................................. 17 10. Durability ........................................................................................................................... 18

5 OPN-2005 Specifications Manual 10.1. Ambient Light Immunity ............................................................................................... 18 10.2. Vibration Strength (without packing) ............................................................................ 18 10.3. Vibration Strength (in individual packing) ..................................................................... 18 10.4. Drop Impact Strength (without packaging) ................................................................... 19 10.5. Electrostatic Discharge Immunity ................................................................................. 19 10.6. MTBF ........................................................................................................................... 19 11. Regulatory Compliance .................................................................................................... 20 11.1. Laser Safety ............................................................................................................... 20 11.2. EMC ........................................................................................................................... 20 12. RoHS ................................................................................................................................. 20 13. Precautions ....................................................................................................................... 21 13.1. Precaution against Laser Light ..................................................................................... 21 13.2. Handling ...................................................................................................................... 21 Appendix 1: Mechanical Drawing .......................................................................................... 22 Table of Figures Figure 1: Detailed View .............................................................................................................. 8 Figure 2: Laser Scanning Tilt and Curvature .............................................................................. 9 Figure 3: Scan Range and Depth of Field ................................................................................. 11 Figure 4: Pitch .......................................................................................................................... 12 Figure 5: Skew ......................................................................................................................... 13 Figure 6: Tilt ............................................................................................................................. 13 Figure 7: Curvature .................................................................................................................. 13 Figure 8: USB B connector ....................................................................................................... 14 Figure 9: Interface circuit .......................................................................................................... 14 Figure 10: Product & Laser Caution Label ................................................................................ 15 Figure 11: Individual Packaging ............................................................................................... 16 Figure 12: Collective Packaging ............................................................................................... 17 Figure 13: Drop Test ................................................................................................................ 19 Figure 14: Mechanical Drawing ................................................................................................ 22

6 OPN-2005 Specifications Manual 1. Abstract This manual provides specifications for the OPN-2005 ultra compact data collector. 2. Overview OPN-2005 has a built in compact laser scanner and scanned barcode data output occurs via USB interface or Bluetooth. This product is compliant with RoHS. 2.1. Product / Model Name OPN-2005 2.2. Features ・ The OPN-2005 is handy and simple data collector. ・ Its compact, lightweight design makes it easy to take anywhere. ・ Data transmission is performed via Bluetooth or a USB interface. ・ Power supply is 3.7V, 240 mAh and lithium-ion polymer battery is used. ・ The OPN-2005 is charged from a USB interface of the host compute

7 OPN-2005 Specifications Manual 3. Basic Specifications Item Specification Remarks Control Section CPU 32 bit Clock 96 MHz FROM 512 Kbyte + 32 Kbyte SRAM 96 Kbyte Storage FROM 1 Mbyte Input Section Key type 2 keys: Trigger, Function Indication LED 2 multicolor color LEDs (red, green, orange, blue) Buzzer Volume (3 levels), Adjustable tone USB Mini USB ver 1.1 12 Mbps, USB- COM/USB-HID RTC (clock) Supported Year, month, date, hour, minute, second (accuracy: ± 90 seconds per month) Power Supply Main battery Lithium polymer 240 mAh Continuous operating time 1000 scans or more Condition: read twice in 10 secs. at room temp. Scanner (MSL-2001) Light-emitting element Red laser diode Laser wavelength / output 650 ±10 nm, up to 1 mW, 25°C Scanning frequency 100 ±20 scan / sec Minimum resolution 0.127mm Scanning distance 60 ～ 250mm Resolution: 1.0 mm PCS 0.9 Symbology JAN, EAN, UPC-A, UPC-E, NW-7 (Codabar),Industrial 2 of 5, Code 11, Code 39, Code 93, Code 128, GS1 Data Bar etc. Dimensions 62.0 × 32.0 × 16.0 (DWH mm) Weight Approx. 29 g Environmental Specifications Operating temperature/humidity 0 ~ 40 °C 20 ~ 85 %RH No frost, no condensation Storage temperature/humidity -20 ~ 60°C 20 ~ 85%RH No frost, no condensation Drop Impact Strength (*1) Frequency 6 faces, 3 cycles Height 150 cm Floor Concrete Regulatory Compliance Laser safety: IEC60825-1:2007 CE Marking, FCC *1 : Conditions of drop shock resistance - Scratches or whitening on plastic surface shall not be counted as a malfunction. - The product shall work properly after the drop test.

8 OPN-2005 Specifications Manual 4. Detailed View Figure 1: Detailed View No. Name Description 1 Scanning Window Laser light is emitted through this window to read bar codes. 2 Mini USB connector Used to connect a dedicated USB cable for charging & data communication 3 Trigger Key A trigger key used to read bar codes 4 Function Key A function key that can be configured with application 5 LED Indicator of operating status, such as bar code reading and warnings 6 Buzzer Hole Sound from a built-in buzzer comes out through these holes. 7 Strap Hole A hole to attach a hand strap

9 OPN-2005 Specifications Manual 5. Optical Specifications 5.1. Laser Scanning Specifications Item Characteristics Unit Light-Emitting Element Red laser diode - Emission Wavelength 650 ±10 (25° C) nm Light Output 1.0 or less mW Scanning Method Bi-directional scanning - Scanning Speed 100 ±20 scans/sec Scan Angle Scan Angle 54 ±5 deg Read angle 44 (Min) deg Notes: Refer to “Technical Specifications,” to read about scanning performance. 5.2. Laser Scanning Standards 5.2.1. Laser Scanning Tilt Vertical differences between both ends of a laser scanning line: - Up to 0.92 degrees in a vertical direction from the scan origin (scanning mirror). - Up to 2.46 mm measured at 150 mm from the scan origin and with zero skew angle. - Measured in the middle of the scan line. 5.2.2. Laser Scanning Curvature The maximum differences between the laser scanning line and a straight line connecting the both ends of the scanning line: - Up to 1.17 degrees from the scan origin (scanning mirror). - Up to 3.06 mm measured at 150 mm from the scan origin with zero skew angle. - Measured in the middle of the scan line. Figure 2: Laser Scanning Tilt and Curvature

10 OPN-2005 Specifications Manual 6. Technical Specifications Barcode Scanner The conditions are as follows, unless otherwise specified. Conditions Ambient temperature and Room temperature (20º C) humidity: Room humidity (45% to 85% RH) Ambient light: 500 to 900 lx Background: Barcode = black Space = white Margin = white Background of label = black Decoding test: Approve the performance when decoding is successful in all ten tests. (Decoding is deemed successful when completed in 0.5 seconds or less.) 6.1. Print Contrast Signal (PCS) PSC 0.45 or higher (70% or higher reflectivity of space and quiet zone) PCS = Reflectance of white bar－Reflectance of black bar Reflectance of white bar 6.2. Minimum Resolution 0.127 mm 6.3. Supported symbologies: Linear (1D) JAN/UPC/EAN, incl. add-on S-Code Codabar/NW-7 Telepen Code 11 Tri-Optic Code 39 UK/Plessey Code 93 Code 128 Postal codes (1D) GS1-128 (EAN-128) Chinese Post GS1 Databar (RSS) Korean Postal Authority Code IATA Industrial 2of5 2D codes Interleaved 2of5 GS1 Composite Codes ISBN-ISMN-ISSN Matrix 2of5 MSI/Plessey

11 OPN-2005 Specifications Manual 6.4. Scan Area and Depth of Field Figure 3: Scan Range and Depth of Field Resolution Symbology PCS Quiet Zone No. of Digits 1.0 mm Code 39 0.9 25 mm 1 0.5 mm Code 39 0.9 18 mm 3 0.25 mm Code 39 0.9 10 mm 8 0.15 mm Code 39 0.9 7 mm 10 0.127 mm Code 39 0.9 5 mm 4 <Conditions> Bar Code Sample : Optoelectronics Test Chart, N/W ratio = 1:2.5 Angle : α = 0° β = 15° γ = 0° Curvature : R = ∞

12 OPN-2005 Specifications Manual 6.5. Pitch, Skew, and Tilt Pitch : α ≦ ±25° Skew : β ≦ ±40° (Excluding dead zone) Dead Zone : β ≦ ±8 ° (Decoding may fail in some areas as a result of specular reflection) Tilt : γ ≦ ±20° Conditions Bar Code Sample Optoelectronics Test Sample Distance 110 mm from the edge of the scan engine <Pitch, Skew and Dead Zone> PCS 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1 : 2.5 <Tilt> PCS 0.9, Resolution 0.5 mm, 3-digit Code 39, Quiet Zone 15 mm Angle Pitch and Tilt angles calculated with Skew angle β= +15° Skew angle / Dead zone: α = 0°, γ = 0° Curvature R = ∞ Figure 4: Pitch25o 25o

13 OPN-2005 Specifications Manual Figure 5: Skew Figure 6: Tilt 6.6. Curvature With 8-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≧ 15 mm With 13-digit JAN/UPC/EAN barcodes, decoding performance is guaranteed when R ≧ 20 mm Conditions Bar Code Sample Optoelectronics Test Sample PCS 0.9, Resolution 0.26 mm, Quiet Zone 10 mm Distance 96 mm from the edge of the scanner Angle Skew angle β = +15 Figure 7: Curvature 40o 40o

14 OPN-2005 Specifications Manual 7. Interface Specifications 7.1. USB 7.1.1. Settings The interface is full-speed USB. 7.1.2. Cable Dedicated cable with PC connector is provided. 7.1.3. Connector Figure 8: USB B connector 7.1.4. Interface Circuit Figure 9: Interface circuit Contact Number Signal Name 1 VCC 2 -DATA 3 +DATA 4 NC 5 GND

16 OPN-2005 Specifications Manual 9. Packaging Specifications 9.1. Individual Packaging Specification Assembled package size: 125 x 112 x 40 (WDH mm) Figure 11: Individual Packaging

17 OPN-2005 Specifications Manual 9.2. Collective Packaging Specification Assembled package size: 595 x 520 x 245 (WDH mm), 100 pieces/box Figure 12: Collective Packaging

18 OPN-2005 Specifications Manual 10. Durability 10.1. Ambient Light Immunity Scanning performance is guaranteed when the range of illumination on a barcode surface is the following values. Incandescent light : 0 ~ 4,000 lx Fluorescent light : 0 ~ 4,000 lx (excluding high-frequency lighting) Sunlight : 0 ~ 80,000 lx <Conditions> Barcode Test Sample OPTOELECTRONICS test chart PCS = 0.9, Resolution 0.25 mm, 9-digit Code 39, Quiet Zone 10 mm, N/W Ratio = 1:2.5 Distance 100 mm from the front edge of the scanner. Angles Pitch: α = 0°, Skew: β = 15°, Tilt: γ = 0° Curvature R = ∞ Power Voltage 3.7 V * Be sure that the direct light or specular reflection from the light source does not enter the light receiving section of the OPN-2005. 10.2. Vibration Strength (without packing) There shall be no sign of malfunction after the following vibration test. Vibration test: Increase the frequency of the vibration from 10 Hz to 100 Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in the non-operating state. Repeat this in each X, Y and Z direction. 10.3. Vibration Strength (in individual packing) There shall be no sign of malfunction after the following vibration test. OPN-2005 Specifications Manual Vibration test: Increase the frequency of the vibration from 10Hz to 100Hz at an accelerated velocity of 19.6 m/s2 (2.0 G) for 30 minutes (60 minutes for a cycle) in individual packaged state. Repeat this in each X, Y and Z direction.

19 OPN-2005 Specifications Manual 10.4. Drop Impact Strength (without packaging) There shall be no sign of malfunction after the following drop test. Drop test: Drop the scanner 3 times (18 times in total), at each 6 face, from a height of 150 cm onto a concrete floor as shown below. Figure 13: Drop Test 10.5. Electrostatic Discharge Immunity Air discharge: 8 kV Max. (No malfunction) 15 kV Max. (No destruction) Contact discharge: 4 kV Max. (No malfunction) [Discharged from the frame of the USB connector.] 10 kV Max. (No destruction) Measurement environment: Use electrostatic testing device compliant with IEC 61000-4-2 Discharge resistance: 330 Ω Capacitor charging: 150 pF 10.6. MTBF MTBF (Mean Time Between Failures) 30,000 hours (excluding the following parts) Laser diode : 10,000 hours Mirror scan unit : 10,000 hours150 cm

OPN-2005 Specifications Manual 20 11. Regulatory Compliance 11.1. Laser Safety IEC 60825-1 Ed.2: 2007 Class 2 CDRH Class I 11.2. EMC EN55022 EN55024 FCC Part 15 Subpart B Class B This device complies with part 15 of the FCC Rules. Operation is subject To the following two conditions: ( 1 ) this device may not cause harmful Interference, and ( 2 ) this device must accept any interference received, including interference that may cause undesired operation. 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. 12. RoHS The OPN-2005 is compliant with RoHS. RoHS: The restriction of the use of certain hazardous substances in electrical and electronic equipment, 2002/95/EC

OPN-2005 Specifications Manual 21 13. Precautions 13.1. Precaution against Laser Light *Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. Caution - Do not stare into the laser light from a scanning window. It may harm your eyes. Do not point the laser directly at others’ eyes. It may harm your eyes. Do not stare into the beam with optical instruments. It may harm your eyes. 13.2. Handling Handle this product carefully. Do not deliberately subject it to any of the following: (1) Shock: ・ Do not drop this product from a height greater than specified in this manual. ・ Do not place this product under or between any heavy items. ・ Do not swing this product around holding the hand strap. (2) Temperature Conditions: ・ Do not use this product at temperatures outside the specified range. ・ Do not pour boiling water on this product. ・ Do not throw this product into a fire. (3) Foreign Materials: ・ Do not immerse this product in water or other liquid. ・ Do not expose this product to chemicals. (4) Others ・ Do not disassemble this product. ・ Do not use this product near a radio or a TV. It may cause reception problems. ・ This product may be affected by a momentary voltage drop caused by lightning. ・This product may not perform properly in a place where it will be subjected to a flickering light, such as a CRT (computer monitor, television, etc.). * This specification manual is subject to change without prior notice.

OPN-2005 Specifications Manual 22 Appendix 1: Mechanical Drawing Figure 14: Mechanical Drawing

Navigation menu