Contents
- 1. Exhibit 8 Manual
- 2. New User Manual
New User Manual
Third Draft
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–1
1
Getting Started
Congratulations on the purchase of your new Compaq iPAQ
Pocket PC GSM/GPRS Wireless Data and Voice Pack. Your
Wireless Pack integrates the power of a state-of-the-art digital
mobile Wireless Pack with the simplicity of your Compaq iPAQ
handheld computer.
To use your Wireless Pack, you must first activate your account
with your network provider. See step 7 of this chapter.
Your account information is located on your SIM (Subscriber
Identity Module) card. If a SIM card did not come with your
Wireless Pack, your network provider will provide one when you
subscribe to their service. Your SIM card must be inserted into
your Wireless Pack before you can use it.
Just follow the seven easy steps in this chapter to get up and
running quickly.
1–2 Wireless Pack User’s Guide
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Third Draft
Step 1: Setting up your handheld computer
1. If you haven’t already set up your handheld, follow the steps
that came with your handheld to set it up.
2. (Recommended) Synchronize your handheld with your com-
puter.
If you need additional information about synchronizing, refer to
the User manual that came with your handheld.
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–3
Third Draft
Step 2: Getting to know your Wireless Pack
Front view
1–4 Wireless Pack User’s Guide
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Third Draft
Back-view
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–5
Third Draft
Jacket Components
Component Function
Internal Battery Battery is incorporated into the
sleeve and powers your
Wireless Pack.
DC-connector Used to connect to a power
source.
Headset jack Enables you to connect a
headset so you can view your
handheld screen while you are
on a voice call.
SIM ejector Used to eject the SIM card
from the Wireless Pack.
SIM holder Holds the SIM card.
1–6 Wireless Pack User’s Guide
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Third Draft
Status LED Provides status information for
your Wireless Pack for GSM /
GPRS. The color of the light
and the blink state indicate the
status as follows:
Green/Blinking slow = On and
in service
No light = Off or battery
depleted
Red/Blinking slow = Low
battery voltage also shown in
WCS display
Red/solid = Charging
Green/solid = Charged
Green/Blinking fast =
Indicates SMS or Voicemail
message is waiting
Red/Blinking fast = Shows
unit is powered on but not
registered on network.
Jacket Components
Component Function
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–7
Third Draft
To adjust the volume during a voice call, press the scroll buttons
on the front of your handheld.
Antenna Receives and sends signals on
your Wireless Pack. The
antenna does not telescope out
of the Wireless Pack.
Power Button Turns on your Wireless Pack
and activates the signal. Your
Wireless Pack stays on until
you remove it from your
handheld or press the power
button to turn it off.
Speaker Functions as the earpiece on
your Wireless Pack.
Jacket Components
Component Function
1–8 Wireless Pack User’s Guide
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Third Draft
Step 3: Insert your SIM card
The SIM (Subscriber Identity Module) card is a small rectangular
plastic piece. The SIM card is included with your service
provider’s documentation and is often referred to as a
“smartcard”.
If your SIM card is already inserted in your Wireless Pack, skip
to Step 4.
Insert the SIM card into the slot.
Since calls are billed to your telephone number, you can move
your SIM card to any mobile device that uses a SIM card, and the
calls will be billed to your account.
Step 4: Connect the Wireless Pack to your
handheld
Slide the iPAQ into the Wireless Pack until it clicks into place.
The Pocket PC will alert you when the sleeve is ready to be used.
You can disable the sound made when you insert the iPAQ into
the Wireless Pack. Press the Qmenu button, tap Expansion Pack,
then select Disable Insertion Sound.
To view the Expansion Pack properties, press the Qmenu button,
then tap Expansion Pack. If the Expansion Pack is installed
properly, the name of the Expansion Pack will appear in the
Expansion Pack Properties screen.
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–9
Third Draft
To remove your Wireless Pack from your handheld, slide the
sleeve down and off your iPAQ.
1–10 Wireless Pack User’s Guide
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Third Draft
Step 5: Charge the battery
1. Plug the travel charger into a wall outlet.
2. Insert the travel charger cable into the connector on your
handheld. You can also put your handheld with the Wireless
Pack into the cradle and insert the travel charger into the con-
nector on the cradle.
When your Wireless Pack is on, the charge icon appears in the
software application while your Wireless Pack charges. Note that
your Wireless Pack must be in your handheld while charging, and
that it takes about 90 minutes to charge the battery. It’s time to
recharge the battery when you observe one of the following:
¥The LED turns red and blinks slowly
¥The LED does not turn on when you turn on your Wireless
Pack.
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–11
Third Draft
Step 6: Turn on your Wireless Pack
After the battery is charged, you can begin using your Wireless
Pack
1. Press the Power button on your Wireless Pack for two seconds
until you hear a beep.
2. Wait maximum two minutes for your Wireless Pack to locate
your service provider’s network. Do not tap OK.
When your Wireless Pack locates the network, the Network
Search dialog displays a Welcome message and your network
provider’s name appears in the upper-left corner of the Voice
application. If you are in an area without coverage, the Network
Search dialog displays an “Unable to register to the network”
message and “No Service” appears in the upper-left corner of the
Voice application.
1–12 Wireless Pack User’s Guide
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Third Draft
Step 7: Activate your account
If you received a new SIM card with your Wireless Pack, you
need to call your network provider to activate your account. Your
network provider’s telephone number is located on the materials
that came with your Wireless Pack
Once you receive your telephone number, it may take a few hours
to become fully active. Some network providers send a special
message with your telephone number. Follow these steps to
check the telephone number:
1. Make sure your phone is on for at least 30 seconds.
2. Press the Phone button on your Wireless Pack for GSM /
GPRS to access the Phone application.
3. Tap the Menu icon.
4. Under Options, tap Phone Info.
5. Tap OK.
Getting Started
Compaq CONFIDENTIAL—For Internal Use Only
Wireless Pack User’s Guide 1–13
Third Draft
Congratulations
You’re ready to use your Wireless Pack. Keep these things in
mind as you use your new device:
¥If you travel outside a coverage area, your Wireless Pack
remains on but you can’t make or receive calls. If this occurs,
the LED blinks red quickly and the Wireless Pack
periodically tries to register to the network. When you return
to a coverage area, the LED blinks green slowly.
¥If you travel outside a coverage area, you can’t receive SMS
text messages. However, the messages are stored by the
network and you will receive them when you return to a
coverage area.
¥Your account includes a voicemail feature so people can
always leave you a message even when your Wireless Pack is
off.
Always use care when operating a mobile device. If you plan to
use your Wireless Pack while driving a car, we recommend using
a headset for hands-free operation. See “Connecting a headset” in
Chapter 10 to learn how to connect a headset to your Wireless
Pack.