Option OGI0505 2G/3G USB Modem User Manual Safety Certification Leaflet USB V3 GI0505
Option NV 2G/3G USB Modem Safety Certification Leaflet USB V3 GI0505
Option >
Contents
- 1. Quick Start Guide
- 2. Safety Leaflet
Safety Leaflet
Safety & Certification Leaflet
Page: 1 of 4
Option
®
Copyright: This document may not be duplicated, nor distributed to third parties without prior and written permission of Option
®
nv.
iCON 505
CE 0682
FCC-ID: NCMOGI0505
Safety & Certification Leaflet
Your iCON 505 is like a mobile phone
Your iCON 505 uses the same technology as a mobile phone. It is important that you always obey all safety regulations
related to mobile phone use. If you have any doubt about the safe operation of your iCON 505 you should remove the
iCON 505 from the PC and seek advice from authorized personnel.
This device may neither be connected to a USB hub, nor to a PC network, nor to a USB 1.0 interface.
Handle with care
This device is designed to be plugged directly into the USB port of a computer, however, every precaution should be
taken to avoid stress on the device should the computer be lifted, moved, relocated or packaged. Should regular
movement of this nature be envisaged, an extender cable (sometimes supplied with the device) should be used so as
to avoid damage to the device. It should be noted that any damage sustained as a result of the aforementioned
mishandling will be regarded as “User Damage” and shall render the product warranty null and void
1. Safety Measurements
Please read the following guidelines carefully. Not following these guidelines can cause harm to the USB stick, yourself
or other persons.
1.1 General recommendations for use
Always treat your product with care and keep in a clean and dust-free place. Do not expose your product to open
flames or lit tobacco products.
Do not expose to liquid, moisture or humidity. Do not expose the iCON 505 to rain or other liquids.
Do not drop, throw or try to bend your product.
Do not paint your product.
Do not attempt to disassemble your product. Doing so may be dangerous and it will void the warranty.
Do not touch the antenna unnecessarily. (This is located either inside the product or as an external antenna.)
1.2 Traveling: Handle the USB stick with care while traveling. It is recommended to remove the USB stick from the
laptop.
1.3 Ambient temperatures: Do not expose the iCON 505 or the antenna to ambient temperatures beyond the range of
-10 and +55 degrees Celsius.
1.4 Explosive atmosphere: Turn off your PC in any area with a potentially explosive atmosphere. It is rare, but your
PC could generate sparks, which could cause an explosion or fire. Areas with a potentially explosive atmosphere are
not always clearly marked. They include fuelling areas (petrol filling stations), below deck on boats, fuel or chemical
transfer or storage facilities and areas where the air contains chemicals or particles, such as grain, dust, or metal
powders. Do not transport or store your PC and accessories in the compartment of a vehicle which contains flammable
gas, liquid or explosives.
1.5 Blasting areas – construction sites: Turn off your PC when in a blasting area in order to avoid interfering with
two-way radios used in blasting operations.
1.6 Do not use on aircraft: Using a wireless devices on aircraft can cause interference and is illegal. Remove your
iCON 505 if you intend to use your PC whilst in an aircraft. Do not use it when the plane is on the ground without
permission from the aircraft crew.
Safety & Certification Leaflet
Page: 2 of 4
Option
®
Copyright: This document may not be duplicated, nor distributed to third parties without prior and written permission of Option
®
nv.
1.7 Do not use in hospitals: Please ensure you follow any local regulations or rules. People are often asked to switch
off all electronic devices in some areas of a hospital. This is a recommendation that Option
®
fully supports. Using the
iCON 505 close to sensitive electronic devices could possibly result in interference. If you intend to use your PC in
such areas, you must remove the iCON 505.
1.8 Interference from radio signals: Option
®
relies on advice from health authorities and relevant expert bodies about
potentially undesirable reactions to radio emissions from the iCON 505.
1.9 Immunity to interference: Electromagnetic interference is the disturbance of the normal operation of a device due
to its response to radio signals from an external source. Occasionally, in some situations you may hear short sounds
coming from audio equipment such as radio or multimedia PC. However, these audible signals do not interfere with the
operation of the equipment.
The Directive from the European Commission (2004/108/EC) governing all forms of electronic equipment concerns
interference that such equipment produces, and its immunity to interference from outside. Any equipment compliant
with that directive is unlikely to suffer interference. All wireless devices may get interference which could affect
performance.
1.10 Cardiac pacemakers, implanted defibrillators & other medical implant devices
It is possible that the iCON 505 may interfere with some types of pacemakers or implanted defibrillators when operated
close to the implanted device. You should seek advice from your doctor that is specific to the implant before using the
iCON 505. Health authorities in many countries have set up advisory services for medical devices and implants
including providing advice about maintaining separation distance between the mobile device or other radio frequency
equipment and the implant. Option
®
operating companies reflect the advice given by their relevant health authority or
national advisory service, and as a minimum recommend a separation distance of at least 20 cm between the iCON
505 or other radio frequency terminal equipment and the embedded device.
1.11 Hearing devices: People with hearing aids or other cochlear implants may experience interfering noises when
using mobile devices or when one is nearby. The level of interference will depend on the type of mobile device, the
type of hearing device and the distance between the two. Increasing the distance between the iCON 505 and hearing
device may reduce interference.
1.12 Children: Do not allow children to play with your iCON 505. They could hurt themselves or others, or could
accidentally damage the iCON 505. Your iCON 505 contains small parts with sharp edges that may cause an injury or
which could become detached and create a choking hazard.
1.13 Driving: Do NOT use the iCON 505 while driving. Park the vehicle first.
1.14 SIM cards: To protect against damage from electrostatic discharge (ESD) do not touch the SIM card connectors.
As a precaution, always make sure that the iCON 505 is already in your hand before you insert or remove the SIM
card.
1.15 Accessories: Only use Option
®
approved accessories. Do not connect with incompatible products. When used
with accessories, Option
®
can only guarantee safe and correct operation of our products if the accessories are tested
and approved by us.
1.16 Safe distance: The iCON 505 has been thoroughly tested to comply with SAR requirements. These tests
simulate the absorption by the human body of radiation from the iCON 505.
This device complies with the SAR regulation as stated by the FCC.
The measurements were made according to the Supplement C to OET Bulletin 65 of the Federal Communications
Commission (FCC) Guidelines [OET 65] for evaluating compliance of mobile and portable devices with FCC limits for
human exposure (general population) to radiofrequency emissions. The device was tested in all applicable USB
orientations with a separation of 5 mm to the flat phantom. The FCC guidelines define a limit of 1.2 W/kg averaged
over a mass of 1 g for single platform devices, in this case a notebook platform.
Safety & Certification Leaflet
Page: 3 of 4
Option
®
Copyright: This document may not be duplicated, nor distributed to third parties without prior and written permission of Option
®
nv.
This device complies with the SAR regulation as stated by the European Council Recommendation.
The SAR limit as defined by the European Council Recommendation is 2.0 W/kg for a mass of 10g (European Council
Recommendation 1999 519 EC), based upon ICNIRP guidelines. Details are available upon request.
For day-to-day use we would advise the user to keep a minimum distance from the antenna of 20 cm.
Users concerned with the risk of Radio Frequency exposure may wish to limit the duration of their calls and to position
the antenna as far away from the body as is practical.
2. Certification requirements
2.1 Federal communications commission notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, we cannot
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio or television technician for help.
2.2 Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly
approved by Option
®
, could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC rules.
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesirable operation.
2.3 Exposure Information to Radio Frequency Energy
This USB 2.0 device has been tested in a notebook for compliance with the SAR requirements as stated by the FCC.
Users concerned with the risk of Radio Frequency exposure may wish to limit the duration of their calls and to position
the antenna as far away from the body as is practical.
The USB Stick has been tested with specific integral antenna for SAR compliance with one notebook having vertical
and horizontal USB slots with a separation distance of 5mm between the panthom and the device. The device can be
used in notebook computers with substantially similar physical dimensions, construction, and electrical and RF
characteristics.
2.4 Manufacturer's disclaimer statement
The information in this document is subject to change without notice and does not represent a commitment on the part
of the vendor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy
or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the
content of this document and/or the products associated with it at any time without obligation to notify any person or
organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental or
consequential damages arising out of the use or inability to use this product or documentation, even if advised of the
possibility of such damages.
For questions regarding your product or declaration, contact:
Option | Gaston Geenslaan 14 | 3001 Leuven | Belgium | www.option.com
Safety & Certification Leaflet
Page: 4 of 4
Option
®
Copyright: This document may not be duplicated, nor distributed to third parties without prior and written permission of Option
®
nv.
2.5 System requirements
USB 2.0 slot
Must be supplied by a SELV (Safety Extra Low Voltage) circuit with limited power.
For questions regarding your product or FCC declaration, contact:
Option | Gaston Geenslaan 14 | 3001 Leuven | Belgium | www.option.com
To identify this product we refer to the Part, Series or Model number found on the product.