Option OGI0644 GSM/UMTS/WLAN USB Modem GI0644 User Manual Users manual

Download:
Mirror Download [FCC.gov]
Document ID	1721856
Application ID	2yYzoFIPWAqiYv8WF4ztNQ==
Document Description	Users manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	63.84kB (797983 bits)
Date Submitted	2012-06-13 00:00:00
Date Available	2012-06-18 00:00:00
Creation Date	2011-12-09 09:14:09
Producing Software	Mac OS X 10.7.2 Quartz PDFContext
Document Lastmod	2011-12-21 05:40:50
Document Title	iCON® XYfi - The world's smallest Personal Hotspot
Document Creator	Safari
Document Author:	Jon A. Jacobsen

Home
Settings
User Guide
Home
FAQ
Useful Links
Support and Help
Site Map
Support and Help
Log Out
English
SMS
Troubleshooting
Contact us
User Guide
User Guide
User Guide
FAQ
Do you need information about how to configure the iCON XYfi, or how to change your WiFi password? Or do you want to
know how to set up the access mode?
Useful Links
Troubleshooting
Contact us
You will find it all in the User Guide!
Quick Start
Home
Settings
SMS
LED
Languages
Web Browser Requirements
Safety and Certification
1. Quick Start
Back To Top
Welcome to the iCON XYfi user guide pages! In this chapter we have summarised the most important information in order to
get you started more quickly.
A detailed overview of each function of the iCON XYfi can be obtained in the other chapters of this documentation.
Insert SIM Card
Power Up iCON XYfi
Connect to Internet
Connect to Administration Pages
1.1 Insert SIM Card
Index
Before connecting the iCON XYfi to you PC/tablet/smartphone etc. for the first time, you must insert the SIM card
supplied by your service provider:
1) Remove the top cover of the iCON XYfi.
2) Insert the SIM card and the optional micro-SD card into the corresponding card slots.
3) Put the top cover back on by inserting it into the slot at the front and press the cover down until it clicks into place.
1.2 Power Up iCON XYfi
Index
For iCON XYfi to be able to connect to any Mobile or WiFi networks, it needs to be switched on. Before you connect it to a
power source, you need to fully extend the unique USB connector (180 degrees) by pushing the button on the top of the
iCON XYfi.
iCON XYfi can use several different power sources:
Computer: Insert the iCON XYfi into a free USB port on your computer.
USB Power Adapter: Switch on the iCON XYfi via the 110-240v power socket.
USB Cigarette Lighter Adapter: Use your iCON XYfi in cars/boats/buses etc. or other places where you have a 12V
cigarette lighter socket.
USB Battery Pack: When travelling, this is the ideal way to power the iCON XYfi.
Others: Such as Car Stereo, Playstation, Wii etc. (with USB connection)...Please make sure that it offers min. 5V/1
Amp output power.
Note: You should only use the original USB Power Adapter/Cigarette Lighter Adapter and USB Battery Pack as
replacement power sources may damage your iCON XYfi and make it less reliable. Option NV is not responsible for
damage caused by using non-Option NV products.
1.3 Connect to Internet
Index
iCON XYfi comes with pre-defined settings that makes it very easy for you to connect to the Internet:
1) Your iCON XYfi is pre-configured with WPA2 encryption to protect unauthorised access. The unique Network Name
(SSID) and WiFi Password (Pre-shared key) are printed on the manufacturing label underneath the bottom cover.
2) When your iCON XYfi is switched on, find the Network Name (SSID) in your list of available networks and click
Connect.
3) You will be asked to fill in the WiFi password, and when this is done, you are connected to the Internet.
If your PIN code is not disabled, or if it is not a known APN address, you will be guided to the settings pages to make
the changes before being able to connect to the Internet.
International roaming is disabled by default, and if you use the iCON XYfi for the first time in this situation, you need
to enable roaming within the settings pages.
1.4 Connect to Administration Pages
Index
The administration pages give you access to see/edit all the settings for the iCON XYfi, in addition to the connection
status etc. In order to log in to the administration pages (valid both for desktop and mobile version):
1a) Desktop: Open your Internet browser and type XYfi/ in the address bar (or 172.22.2.1) and press 'Enter'.
1b) Mobile (smartphone): Open your Internet browser and type XYfi/ in the address bar. If 'XYfi/' does not send you
to the mobile site, type m.XYfi/ (or 172.22.2.1) and press 'Go'.
2) The Log In page will open and you have to create/insert your username and password (case sensitive) to enter the
administration pages.
You can save this address as a bookmark in your browser or add to your home screen, for future use.
2. Home
This is your iCON XYfi homepage where you can carry out basic connection settings.
Connect Button
Status Bar
Connect a device to iCON XYfi using Wi-Fi Protected Setup
Manage Users and your iCON XYfi
Back To Top
2.1 Connect Button
Index
Establish or terminate the connection (soft button).
You can also establish or terminate the connection (physically), by pushing the LED button for 1 second.
2.2 Status Bar
Index
The Status Bar gives you an easy access and a quick overview of your current connection.
Network Provider
Technology
Signal Strength
Speed (Mbps)
Active Users
Current Access Mode
2.2.1 Network Provider
Index
The company that provides access to the Internet.
If the icons colour changes to violet (normally blue), it means you are in roaming mode using mobile network
connection
2.2.2 Technology
Index
This indicates whether your iCON XYfi is currently connected to a WiFi or Mobile Network.
If you are connected to a mobile network, it will also indicate if you have a 3G (HSPA) or a (slower) 2G (EDGE/GPRS)
connection.
2.2.3 Signal Strength
Index
To help you position the iCON XYfi for best reception of the Mobile Network signal, we have included a signal strength
monitor mode on the front page.
The signal strengths indicators move up as the strength of the signal increases and down as the signal decreases
(only shown if you are registered to a network).
To increase the signal strength of your iCON XYfi , try moving it slightly, or move towards a window if you are
connecting from inside a building.
If you continuously experience low signal strength in a certain area, it may be that network coverage is insufficient
there. Your operator or service provider can provide you with more information on network coverage.
If you believe that the problem may be with your iCON XYfi rather than the network, please contact the dealer from
whom you purchased the appliance, who will arrange for it to be returned for inspection.
2.2.4 Speed (Mbps)
Index
Here you can see your current Internet download and upload speed, measured in Mbps (megabits per second -> data
transfer speeds).
The higher the number, the faster you will download or upload a file.
2.2.5 Active Users
Index
Here you can see the number of active users currently connected to your iCON XYfi.
To edit these connections, please go to: 'Settings/Users and Devices'
2.2.6 Current Access Mode
Index
You can choose from three settings for the access mode:
Just USB: When you insert the iCON XYfi in a Windows/Mac it will automatically enter the 'Just USB' access mode
and will be the only device with this status. This feature is only possible when inserted into a Windows/Mac.
Important! If you set only 'Just USB' as access mode, the WiFi access will be turned off and no one will be able to
connect via wireless to your iCON XYfi.
WiFi Users: If this access mode is chosen, only the devices with the access mode 'Just USB' & 'WiFi Users' will be
able to connect to internet. All devices with the access mode 'Guest Users' will be blocked.
Guest Users: If this access mode is chosen, all devices connected to iCON XYfi will be able to connect to internet.
However, the devices with the access mode 'Guest Users' will in addition have to enter the 'Guest Password' if set
by the administrator, before being able to connect to the Interne
2.3 Connect a device to iCON XYfi using Wi-Fi Protected Setup
Index
Automatically add WiFi devices to your iCON XYfi using WPS - 'WiFi Protected Set-up'.
Your device needs to support WPS in order to use this feature.
Introduction to WPS
2.3.1 Introduction to WPS
Index
WiFi Protected Setup (WPS) is a standard for easy and secure wireless network set-up and connections.
To use WPS, the device you wish to connect must support WPS and be compatible with WPA security (find out from
your device manual if it supports the WPS feature). WPS can automatically set up a random Network Name (SSID)
and strong WPA wireless security for computers, smartphones, tablets and other consumer electronics devices.
WPS enables you to use push buttons or a PIN code instead of entering a network name (SSID) and WiFi password by
hand.
Options for adding a WPS device:
Push button: You can either physically press the (LED) button on iCON XYfi for 3 seconds or press the 'OK' button
(soft button) in the administration pages. Then press the WPS button on the device you want to connect, and they
will start pairing.
PIN (Personal Identification Number): The PIN to be entered is generated from the device you want to join up
with the iCON XYfi. Enter this PIN and they will start pairing.
Note: You have 2 minutes to complete WPS pairing and only one device can connect during this time
2.4 Manage Users and your iCON XYfi
Index
Current Access Mode
Default Access Mode
Guest Password
Active Users
2.4.1 Current Access Mode
Index
You can choose from three settings for the access mode:
Just USB: When you insert the iCON XYfi in a Windows/Mac it will automatically enter the 'Just USB' access mode
and will be the only device with this status. This feature is only possible when inserted into a Windows/Mac.
Important! If you set only 'Just USB' as access mode, the WiFi access will be turned off and no one will be able to
connect via wireless to your iCON XYfi.
WiFi Users: If this access mode is chosen, only the devices with the access mode 'Just USB' & 'WiFi Users' will be
able to connect to internet. All devices with the access mode 'Guest Users' will be blocked.
Guest Users: If this access mode is chosen, all devices connected to iCON XYfi will be able to connect to internet.
However, the devices with the access mode 'Guest Users' will in addition have to enter the 'Guest Password' if set
by the administrator, before being able to connect to the Interne
2.4.2 Default Access Mode
Index
You have two possible settings for default access modes when a new device is connecting to your iCON XYfi for the
very first time:
WiFi Users: Typically, your own laptop and personal WiFi enabled devices (e.g. smartphone/tablet etc.) and a
limited user group that often connects to the iCON XYfi.
Guest Users: This access mode adds another layer of security for you as an owner of the iCON XYfi. In addition to
the Network Name (SSID) & the WiFi Password (Pre-shared Key), the user also needs to know the 'Guest
Password' which is set by you. If a user/device is in the 'Guest Users' access mode, he/she is sent to the iCON XYfi
home page to enter the password before being allowed to use the Internet.
You can always change the access mode per user/device at a later stage within the 'Users & Devices' section.
2.4.3 Guest Password
Index
If you set a 'Guest Password' then users must visit the iCON XYfi home page first to enter the password before
being allowed to use the Internet.
Note: 'Guest Password' is case sensitive.
This feature has been implemented so that you can always enable secure WiFi (WPA2) for your users and yet it still
gives you control over who can or cannot access the Internet.
You might want to use this feature for example when more than eight users know your WiFi security code, but you
need to limit access to a selected few of them.
2.4.4 Active Users
Index
Here you will see all the users that are currently connected to your iCON XYfi.
In order to edit each device, click on the device name: the complete line becomes blue:
Device Name: You can change the device name so it is easy for you to see which user/device is connected
(instead of the device default name). The new name you choose will be remembered next time it makes a
connection.
Access Mode: Here you can change the access mode between 'WiFi Users' and 'Guest Users'.
WiFi Users: Typically, your own laptop and personal WiFi enabled devices (e.g. smartphone/tablet etc..) and a
limited user group that often connects to the iCON XYfi.
Guest Users: This access mode adds another layer of security for you as an owner of the iCON XYfi. In addition to
the Network Name (SSID) & the WiFi Password (Pre-shared Key), the user also needs to know the 'Guest
Password' which is set by you. If a user/device is in the 'Guest Users' access mode, he/she is sent to the iCON XYfi
home page to enter the password before being allowed to use the Internet.
If you want to change the Default access mode for new devices connecting to the iCON XYfi it can be done at any
time to either 'WiFi Users' or 'Guest Users' in the above section.
Remove/block devices: If you hover your mouse over a device name you will see two icons on the right. One is
a trashbin and if you click this, the device will be removed from the iCON XYfi. If you click the other icon, this
user/device will be blocked/unblocked from the iCON XYfi
3. Settings
Back To Top
Manage Security
Mobile Networks
WiFi Networks
Users and Devices
About iCON XYfi…
3.1 Manage Security
Index
The iCON XYfi is your Personal HotSpot. Normally its settings 'out of the box' are just fine but on these pages you can
adjust various things to make it yours, tweak its performance and security.
WiFi Settings
Advanced Settings
3.1.1 WiFi Settings
Index
iCON XYfi let's you change the WiFi settings the way you want.
In order for your changes to take place, you need to click the 'Save Changes' button.
Changes here will disconnect all active users and they will need to reconnect.
Network Name (SSID)
The Network Name (SSID) is the name that you will see when your WiFi client lists networks. The name can be up
to 32 characters long.
Broadcast Network (SSID)
Broadcast your Network Name (SSID): If you set the broadcast to 'Yes', then other devices can detect and
connect to your WLAN.
Choose 'No' to disable broadcasting and hide the name of your network. This provides a higher security, as other
devices have to know the Network Name (SSID) to connect. You can install the WLAN with this feature enabled
and then disable it once you have set up iCON XYfi and its associated wireless clients.
WiFi Password
We strongly recommend you to use WiFi password (WPA2) if it is available for your WiFi clients.
WiFi password (data encryption) possibilities:
No (no encryption): This option is not recommended except during installation of your network.
Yes: Connecting users can only join your iCON XYfi using this password. Data encryption used is WPA2 (Wi-Fi
Protected Access).
Create your password for your connections. Both letters and numbers can be used.
The password must contain at least 8 characters (max. 63 characters).
WiFi Channel
The iCON XYfi has 2 options for WiFi channel selection:
Auto - this means that the first time it is powered on, it will automatically select the WiFi channel that has the
least amount of interference.
Manually - it can happen that surrounding networks are added and the initial WiFi channel may become
crowded. Use the drop-down list and select a new channel.
Note: WiFi channels 1, 6 or 11 are usually the best selections.
3.1.2 Advanced Settings
Index
Within this section you can enable/disable WPS setup and add Port forwarding.
Please make sure you understand what you are doing before adjusting these settings.
Port forwarding
Port forwarding allows remote computers, for example, computers on the Internet, to connect to a specific
computer or service within a private local area network (LAN).
Common reasons to use port forwarding are for online gaming, internet applications, remote access to IP
cameras, FTP and WEB servers etc.
You can add up to 10 port forwarding rules.
Name
Please insert a name (up to 15 characters) for your Port Forwarding…ex: MyCamera
(Only use the English letters a-z, A-Z and numbers 0-9)
Protocol
TCP (Transmission Control Protocol) - The way it works is the computer sending the data connects
directly to the computer it is sending the data to, and stays connected for the duration of the transfer. The
two computers can guarantee that the data has arrived safely and correctly, and then they end the
connection.
UDP (User Datagram Protocol) - The way it works is the computer sending the data packs the
information into a nice little package and releases it into the network with the hopes that it will get to the
right place. What this means is that UDP does not connect directly to the receiving computer like TCP does.
Rather it sends the data out and relies on the devices in between the sending computer and the receiving
computer to get the data where it is. This method of transmission does not provide any guarantee that the
data you send will ever reach its destination.
TCP & UDP - Sometimes both protocols are needed to make a connection and this should be chosen.
External Port
Enter the external port number you want to be used by iCON XYfi.
You can also specify a range of ports. For example: 1-80 (maximum number of ports = 65535). If you use a
range, it should be the same range used for the internal port.
Internal IP Address
Enter the IP address of the device that should receive the requests.
Internal Port
Enter the internal port number you want to be used by the computer or Internet application.
You can also specify a range of ports. For example: 1-80 (maximum number of ports = 65535). If you use a
range, it should be the same range used in the external port
3.2
Index
You can connect iCON XYfi to a WiFi Network using one of the below methods. Known networks will be joined
automatically:
Scanning: This is the default method with a list over all available WiFi networks in range.
Manual: To be selected if you want to connect to a WiFi network with a hidden Network Name (SSID).
WPS: (WiFi Protected Setup): Automatically connect iCON XYfi to a WiFi Network, using WPS - 'WiFi Protected
Setup'. The WiFi Network need to support WPS in order to use this feature.
WiFi is always preferred over Mobile Network (3G/EDGE/GPRS). If you want to force Mobile data, you have to turn off
WiFi or Disconnect whatever networks are in range.
Scanning for WiFi Networks
Manual Connection
WPS Connection
3.2.1 Scanning for WiFi Networks
Index
This show you a list over available networks in your range.
1. WiFi Status: 3 Options:
a) Green Button - If the button is green 'You're Connected', it means you are currently connected to this network
(you can of course only be connected to one network at the time).
b) Blue Button - If the button is blue 'Click to Connect', it means this network is in range and you can connect by
clicking this button.
c) Grey - If the button is grey 'Not in Range', it means you have previously connected to this network. It is
currently not possible for you to connect to this network as it is out of range.
2. Signal Strength: Shows you the signal strength of the WiFi Network. The more bars the stronger the signal.
3. Network Name: The name of the WiFi Network.
4. Edit Network: This tool will only appear after you have connected to a WiFi network once. Here you can edit
the Network Name, Security and Password if this has been changed. You can also 'Forget this Network', which
means iCON XYfi will automatically stop to join this network. It will reset the settings for this WiFi network,
including the password.
5. Remembered Network: After you have connected to a network it will remember your credentials and a star
will appear next to the network name. Next time you will connect to this WiFi network, you will not be prompted for
password. You can remove this star (Forget this Network) by 'Edit Network'.
6. Padlock: Some WiFi networks require a password to join. Password-protected WiFi networks are indicated by
the padlock. If the padlock is unlocked, the WiFi network is unsecured.
3.2.2 Manual Connection
Index
Manual Connection
3.2.3 WPS Connection
Index
WiFi Protected Setup (WPS) is a standard for easy and secure wireless network set-up and connections.
To use WPS, the device you wish to connect to must support WPS and be compatible with WPA security (find out from
your device manual if it supports the WPS feature). WPS can automatically set up a random Network Name (SSID)
and strong WPA wireless security for computers, smartphones, tablets and other consumer electronics devices.
WPS enables you to use push button or a PIN code instead of entering a network name (SSID) and WiFi password by
hand.
Options for adding a WPS device:
Push button: You can press the 'Start' button (soft button) in the 'WiFi Network' pages. Then press the WPS
button on the device you want to connect to, and they will start pairing.
PIN (Personal Identification Number): The PIN is to be entered to the connecting device and it is generated
from iCON XYfi. Enter this PIN and they will start pairing.
Note: You have 2 minutes to complete WPS pairing and only one device can connect during this time
3.3 Mobile Networks
Index
The Mobile Networks section gives you access to the 2G/3G settings and SIM management.
Search for Network
Mobile Network Settings
Connection Method
Manage PIN
Unlock iCON XYfi
3.3.1 Search for Network
Index
iCON XYfi gives you free choice of the available networks.
Automatic - the automatic setting is used by default. This means that the iCON XYfi determines your network
provider independently and uses the associated network.
Manual - if you activate the manual option, the iCON XYfi shows you a list of the currently available networks. You
can then decide which network you want to use or ignore by clicking on the box next to the respective provider.
The list of available networks can be updated at any time by clicking on the 'Scan' button.
Note: If you select an external network that does not belong to your provider, additional costs may be incurred.
Please ask your provider which mobile networks you can use.
3.3.2 Mobile Network Settings
Index
The iCON XYfi is usually configured from the factory with the correct settings of your Mobile Networ Provider for
accessing the internet over 3G.
If you change your SIM provider or if the default settings do not apply to your SIM, then this is where you can edit
the APN, username and password.
APN
In order for iCON XYfi to be able to connect to Mobile networks, it needs to have the correct APN (Access Point
Name) that corresponds to the SIM provider. Normally the iCON XYfi will automatically insert the APN (+
Username & Password) for you, if it is a known APN address.
To verify the proper APN information that needs to be filled in, please contact your SIM provider.
APN Username and Password
Leave Emtpy if APN address does not require username and password.
Username: To be filled in if your APN is associated with a 'Username' (defined by your SIM provider).
Password: To be filled in if your APN is associated with a 'Password' (defined by your SIM provider)
Network Type
Choose 2G or 3G as network type
Depending on the version, mobile networks support different transmission technologies. You can define your
preferred transmission technologies using the 'Network Selection' option. The following facilities are available:
Automatic: iCON XYfi independently determines the fastest transmission method and adapts the settings
accordingly.
3G only: iCON XYfi always uses 3G fast access via HSPA (High Speed Packet Access) or UMTS (Universal
Mobile Telecommunications System). However, these are not available everywhere. If this setting has been
activated, no connections will be made via 2G!
2G only: iCON XYfi will always use EDGE (Enhanced Data Rates for GSM Evolution) or GPRS (General Packet
Radio Service) Internet connections. This is slower than 3G, but are available almost everywhere. If this setting
is activated, no connections will be made via 3G!
3.3.3 Connection Method
Index
Choose your connection method
iCON XYfi let's you change the connection method to suit your needs.
Connection method gives you the following choices:
Manually: Connect to the Internet by clicking 'Connect' on the Connection Status page in the management
console. You can also establish or terminate the connection (physically), by pushing the LED button for 1
second.
Automatic upon traffic: iCON XYfi will automatically connect when you attempt to send data via the Internet.
Always connected: iCON XYfi will connect to Internet as soon as it powered up and will stay connected until it
is powered down.
Please note that in order for your changes to take place, you need to click the 'Save Changes' button.
Inactivity timeout
(in minutes)
In case of inactivity the iCON XYfi will disconnect after your set timing.
You have to insert the inactivity time in minutes. Set it to 0 (zero) if you want the Internet to stay connected all
the time.
The maximum is 1440 minutes (24 hours). Incoming traffic is treated as inactivity.
Auto Connect when Roaming
When travelling out of the country or operating near a country border you could be in a roaming situation.
Roaming charges will apply and certain networks are more expensive than others.
If you do not want the iCON XYfi to Auto Connect in roaming situations, please click the 'No' button (remember to
Save Changes).
3.3.4 Manage PIN
Index
Enable/Disable your PIN number
You can lock your SIM card (enabled) so that it can not be used without a Personal Identification Number (PIN).
You must then enter the PIN each time you turn on the iCON XYfi.
You can deactivate the PIN request by using the 'Disable' option.
Enter your PIN number
Please enter a SIM card PIN code (ex. 0234)
Where can I find my PIN number?
Please refer to your SIM card documentation or contact your carrier to find out what your default SIM PIN code
is.
PIN number change
You can also change your PIN code directly via iCON XYfi. To do this, enter the code in the line 'Current PIN'.
Then enter your new code in the first line and repeat the entry in the second line.
Confirm the change by clicking 'Save Changes'.
PUK
PUK (Personal Unlocking Key) - If you enter the PIN incorrectly three times, you may need to enter a Personal
Unlocking Key (PUK) to enable your SIM card again.
Refer to the SIM card documentation or contact your carrier.
Note: Entering an incorrect PUK code too many times will result in the SIM becoming permanently locked. If
this occurs, you will need to contact your carrier for a replacement SIM card.
3.3.5 Unlock iCON XYfi
Index
In case the iCON XYfi is locked to a specific Internet Service Provider, it can be unlocked with a code that you need to
get from your Internet Service Provider. Normally there are certain conditions that must be fulfilled to be able to
unlock the device, but please contact your Internet Service Provider for details.
3.4 Users and Devices
Within this section you can choose/edit who is able to connect to your iCON XYfi.
Maximum number of WiFi/Guest users
Index
Organise your users and devices
3.4.1 Maximum number of WiFi/Guest users
Index
You can allow access for up to a maximum of 8 users/devices connecting to your iCON XYfi using WiFi.
3.4.2 Organise your users and devices
Index
Here you have the possibility to see which devices that are currently connected/offline/blocked to your iCON XYfi and
edit/change access mode etc. per device.
Colour codes in front of each device:
Green: This device is currently connected to your iCON XYfi.
Grey: This device has previously connected to your iCON XYfi, but is now offline.
Red: This device is blocked and will not be able to connect to your iCON XYfi until you 'unblock' it.
In order to edit each device, please click on the device name and the complete line becomes blue:
Device Name: You can change the device name so it is easy for you to see which user/device is connected
(instead of the device default name). The new name you choose will be remembered next time it makes a
connection.
Access Mode: Here you can change the access mode between 'WiFi Users' and 'Guest Users'.
WiFi Users: Typically your own laptop and personal WiFi enabled devices (e.g. smartphone/tablet etc..) and
limited user group that often connects to the iCON XYfi.
Guest Users: This access mode adds another layer of security for you as an owner of the iCON XYfi. In addition to
the SSID (Network Name) & the Pre-shared Key (WiFi Password), the user also needs to know the 'Guest
Password' which is set by you. If a user/device is in the 'Guest Users' access mode, he/she is sent to the iCON XYfi
landing page for password entry allowed access to internet.
If you want to change the Default access mode for new devices connecting to the iCON XYfi it can be done at any
time to either 'WiFi Users' or 'Guest Users' in the 'Home Page'.
Remove/block devices: If you hover your mouse over a device name you will see 2 icons to the right. One is a
trashbin and if you click this, the device will be removed from the iCON XYfi.
If you click the other icon, this user/device will be blocked/unblocked from the iCON XYfi.
Changes will only take place when you click the 'save'-icon.
3.5 About iCON XYfi…
Index
Username & Password
Local Network Settings
Network Connections
Firmware Update
Restore iCON XYfi
About
3.5.1 Username & Password
Index
Username
Here you can change your current username (case sensitive).
We recommend you to write down your new username and keep it in a safe place.
If you want to change your username (case sensitive), please overwrite the current one and click 'Save Changes'.
Password
Here you can change your current password (case sensitive).
We recommend you to write down your password and keep it in a safe place.
Enter your new password (case sensitive).
The password must contain at least 8 characters
3.5.2 Local Network Settings
Index
In some cases you would like to change the settings for your local network and this can be done here. Please make
sure you understand what your are doing before saving any changes.
Admin URL (Hostname)
This is a 'Nickname' for your IP address. Instead of typing in the complete IP address in a Web-browser address
bar (to access admin pages), you only need to type a URL (not case-sensitive). The default URL is XYfi.
Admin IP Address
Acronym for ‘Internet Protocol’ address. This is the address to access the admin pages of the iCON XYfi. Type the
IP address in a Web-browser address bar and the admin log in pages will appear. The default IP address is
172.22.2.1.
IP is the protocol within TCP/IP (Internet protocol Suite) that is used to send data between computers over the
Internet. An IP address is an assigned number used to identify a computer that is connected to a network through
TCP/IP. An IP address consists of four numbers (each of which can be no greater than 255) separated by periods,
such as 172.22.2.1.
Subnet Mask
A mask used to determine to what subnet an IP address belongs.
Typically, a subnet may represent all the machines at one geographic location, in one building, or on the same
local area network (LAN). Having an organization’s network divided into sub-nets allows it to be connected to the
Internet with a single shared network address. Similar in form to an IP address and typically provided by an ISP.
An example of a subnet mask value is 255.255.0.0.
DHCP Range start
Allows a computer to join an IP-based network without having a pre-configured IP address. DHCP Range Start
assigns unique IP addresses to devices using your start number.
DHCP Range end
Allows a computer to join an IP-based network without having a pre-configured IP address. DHCP Range End is
the last unique IP addresses it will create.
DHCP Lease time
Each device will be assigned an IP address by the DHCP server for this amount of time, when it connects to the
network. When the lease expires, the server will determine if the computer has disconnected from the network. If
it has, the server may reassign this IP address to a newly-connected computer. This feature ensures that IP
addresses that are not in use will become available for other computers on the network.
3 options for entering a value - s (seconds), m (minutes) or h (hours). When inserting the value please enter s, m
or h behind the value…Examples 8s , 15m and 24h
3.5.3 Network Connections
Index
Here you can view the current status of your network connection. Information available includes the type of
connectivity, IP address, received and sent bytes and much more.
3.5.4 Firmware Update
Index
This is where you can update your iCON XYfi to have the latest firmware available. In order to download the latest
firmware available, please click here: Latest iCON XYfi Firmware
3.5.5 Restore iCON XYfi
Index
It is possible to restore the iCON XYfi to its default/factory settings.
You do this by pressing the LED/WPS ('side') button on the actual iCON XYfi device and then plugging it into a power
outlet. Another possibility is to do this via the administration pages.
After approx. 15-20 seconds the LED will start to flash 'red' and 'green' and will continue for approx. 10 seconds.
When the LED becomes 'amber', the iCON XYfi is restored to its factory settings.
3.5.6 About
Index
Here you will see your current firmware version and other details about your iCON XYfi.
4. SMS
Back To Top
You can use iCON XYfi to receive SMS text messages. The LED on iCON XYfi lets you know when a new SMS arrives, by
blinking 'Amber'. The SMS tab within the administration pages will also include a badge with the number of received/unread
messages.
The Inbox will display the messages, with unread message in bold.
When you have read the SMS you can click on:
Delete: the SMS is permanently removed without confirmation
Previous: Read the previous SMS
Next: Read the next SMS
Back to Inbox: Takes you back to the Inbox overview
5. LED
The iCON XYfi features a coloured LED with the following states:
No Light - Not switched on
Red Solid - Switched on
Red/Blue/Green Flashing - Unregistered/scanning
Green Flashing - Registered 2G
Green Solid - Connected 2G
Blue Flashing - Registered 3G
Back To Top
Blue Solid - Connected 3G
Violet/Blue Flashing - Registered Roaming
Violet/Blue Solid - Connected Roaming
Blue Flashing (2 times) - Connected to WiFi
Red Flashing (2 times) - WPS connection is on
Amber Solid - SIM issue
Amber Flashing - text message received
Red/Blue Flashing - Problem/Firmware crash
Red/Green Flashing - Restore to factory settings (LED will become 'amber' when done). It will only flash red/green
when restoring using the physical LED button (not when using soft button).
6. Languages
Back To Top
Knowing foreign languages is always useful - and the same applies to iCON XYfi, of course.
You can simply select a different language for iCON XYfi in the language bar you can always find in the top right corner.
To change the languages, click on the box and select the required language.
7. Web Browser Requirements
Back To Top
To ensure the best possible user experience when using our advanced iCON XYfi, you should use any of the browsers below.
The newer the browser version you use, the better (minimum requirements can be seen below).
Back To Top

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
Linearized                      : No
Page Count                      : 12
PDF Version                     : 1.4
Title                           : iCON® XYfi - The world's smallest Personal Hotspot
Author                          : Jon A. Jacobsen
Subject                         : 
Producer                        : Mac OS X 10.7.2 Quartz PDFContext
Creator                         : Safari
Create Date                     : 2011:12:09 09:14:09Z
Modify Date                     : 2011:12:21 05:40:50-08:00
Apple Keywords                  : 

EXIF Metadata provided by EXIF.tools