Contents
User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1460097 |
| Application ID | 6PJr/m0Zwg/zS/Htw9EyiQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 50.51kB (631379 bits) |
| Date Submitted | 2011-05-06 00:00:00 |
| Date Available | 2011-08-02 00:00:00 |
| Creation Date | 2017-11-05 17:40:20 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-05 17:40:20 |
| Document Title | User Manual |
| Document Creator | NitroPDF 6.0 |
GTM671W FCC ID: NCMOMO6712 IC: 2734A-MO6712 Certification Leaflet AGENCY REQUIREMENTS Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations: 4,901,307; 5,490,165; 5,056,109; 5,504,773; 5,101,501; 5,506,865; 5,109,390; 5,511,073; 5,228,054; 5,535,239; 5,267,261; 5,544,196; 5,267,262; 5,568,483; 5,337,338; 5,600,754; 5,414,796; 5,657,420; 5,416,797; 5,659,569; 5,710,784; 5,778,338 Federal communications commission notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: > Reorient or relocate the receiving antenna. > Increase the separation between the equipment and receiver. > Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. > Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Option could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC rules. This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Exposure Information to Radio Frequency Energy Users concerned with the risk of Radio Frequency exposure may wish to limit the duration of their calls and to position the antenna as far away from the body as is practical. Modular approval The module can be integrated into fixed or mobile categorized end-products, so that 20 cm separation distance to end-user can be assured. You can integrate the module in a portable device; in this case a permissive change application would be required. Approbation par module Le module peut être incorporé à un produit final classé comme fixe ou mobile, mais d’une manière à garantir que l’usager final soit à une distance de 20 cm. Vous pouvez incorporer le module à un appareil portable, et dans ce cas, une demande de changement autorisée serait requise. Device marking The integrated device must carry the CE mark and Notified body number of the Notified Body used in the Annex IV conformity assessment of the module on the manufacturing label as described in the R&TTE directive 1999/5/EC Annex VII. This Notified Body approval only applies to the module and not the final integrated product. The final integrated product should undergo its own conformity process to the R&TTE directive and should meet all applicable CE marking directives in order to place the CE mark on the final integrated product. The end device must also be appropriatly marked with the FCC identification as described in FCC Part 2.925 and 2.926. Industry Canada requires the host device to be marked with “Contains transmitter module IC: 2734A-MO6712” conform to section 3.2.1 from the RSS-GEN guidelines. Marquage du dispositif Le dispositif incorporé doit porter la marque CE et le numéro de l’organisme notifié utilisé dans l’Annexe IV de l’évaluation de la conformité du module, sur l’étiquette de fabrication, tel que décrit dans l’Annexe VII portant sur les équipements radio et équipements terminaux de télécommunication (« R&TTE »). Cette approbation de l’organisme notifié ne s’applique qu’au module et non au produit final après intégration. Le produit final après intégration devrait être lui-même l’objet d’un processus d’évaluation de la conformité à la directive sur les équipements radio et équipements terminaux de télécommunication et devrait suivre toutes les directives applicables relatives au marquage CE pour placer la marque CE sur le produit final après intégration. Le dispositif fini doit aussi être marqué, de la manière appropriée, avec l’identification du FCC tel que décrit dans « FCC Part 2.925 » et 2.926. Industrie Canada exige que le dispositif hôte soit marqué sous la forme « Contains transmitter module IC: 2734A-MO6712 » conformément à la section 3.2.1 des directives CNR-Gen. Manufacturer's Disclaimer Statement The information in this document is subject to change without notice and does not represent a commitment on the part of the vendor. No warranty or representation, either expressed or implied, is made with respect to the quality, accuracy, or fitness for any particular purpose of this document. The manufacturer reserves the right to make changes to the content of this document and/or the products associated with it at any time without obligation to notify any person or organization of such changes. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use this product or documentation, even if advised of the possibility of such damages. For questions regarding your product or declaration, contact: Option | Gaston Geenslaan 14 | 3001 Leuven | Belgium | www.option.com SYSTEM REQUIREMENTS > Must be supplied by a SELV (Safety Extra Low Voltage) circuit with limited power. 2.4GHz Wireless LAN France For 2.4GHz wireless LAN operation of this product, certain restrictions apply. This equipment may use the entire 2400 to 2483.5MHz frequency band (channels 1 through 13) for indoor applications. For outdoor use, only 2400 Mhz to 2454MHz frequency band (channels 1-9) may be used. For the latest requirements, see http://www.art-telecom.fr. L'utilisation de cet équipement de réseau local sans fils de 2.4GHz est soumise à certaines restrictions: cet équipement peut être utilisé à l'intérieur d'un bâtiment en utilisant toute la plage de fréquences de 2400 à 2483.5MHz (canaux 1–13). Pour une utilisation en environnement extérieur, seules les fréquences comprises entre 2400-2454 MHz (canaux 1-9) peuvent être utilisées. Pour les dernières restrictions, voir http://www.art-telecom.fr. European Union declaration of conformity This products bears the CE marking and complies with the R&TTE Directive (1999/5/EC), EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community. Compliance with these directives implies conformity to the following European Norms: Radio Frequency spectrum efficiency: > EN 301 511 v9.0.2 > EN 301 908-1/-2 v4.2.1 > EN 300 328 v1.7.1 > EN 300 440-1 v1.6.1 /-2 v1.4.1 Electromagnetic Compatibility > EN 301 489-1 v1.8.1/-3 v1.4.1/-7 v1.3.1/-17 v2.1.1/-24 v1.5.1 Safety and Health > EN 60950-1: 2006 +A11: 2009 This product may be used in the following countries: > All EU Memberstates > Iceland > Switzerland > Norway > United States of America > Canada For questions regarding your product or FCC declaration, contact: Option | Gaston Geenslaan 14 | 3001 Leuven | Belgium | www.option.com To identify this product we refer to the Part, Series, or Model number found on the product.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res Create Date : 2011:04:13 12:03:25+02:00 Creator : NitroPDF 6.0 Modify Date : 2011:04:21 00:09:27+08:00 XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Creator Tool : NitroPDF 6.0 Metadata Date : 2011:04:21 00:09:27+08:00 Producer : BCL easyPDF 6.00 (0320) Format : application/pdf Document ID : uuid:e5980be7-9c43-4403-9a80-ba1c3531d4a6 Instance ID : uuid:5898aa97-ac7d-4a82-8606-277af37f96f9 Page Count : 2EXIF Metadata provided by EXIF.tools