Option OMO6712 Quad-Band GSM/GPRS/EDGE/UMTS HSxPA module w/WLAN User Manual Nike Tab eng indb
Option NV Quad-Band GSM/GPRS/EDGE/UMTS HSxPA module w/WLAN Nike Tab eng indb
Option >
Contents
Users Manual 1
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 1545648 |
| Application ID | nJRi1kJBH+K1uTEmU+RAOg== |
| Document Description | Users Manual 1 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 478.71kB (5983818 bits) |
| Date Submitted | 2011-09-21 00:00:00 |
| Date Available | 2011-12-20 00:00:00 |
| Creation Date | 2017-11-04 01:50:08 |
| Producing Software | GPL Ghostscript 9.18 |
| Document Lastmod | 2017-11-04 01:50:08 |
| Document Title | Nike-Tab_eng.indb |
| Document Creator | Adobe InDesign CS3 (5.0.4) |
User Guide Getting Started Using the Computer Settings and Upgrade Backup / Restore Appendix Contents Start Chapter 1. Getting Started Contents Chapter 1. Getting Started 21 24 28 Before You Start Safety Precautions Proper Posture During Computer Use Overview Turning the Computer On and Of Chapter 2. Using the Computer 35 41 43 44 46 48 50 52 57 58 60 Using the Touch Screen (For Windows 7 touch screen models only) Entering Letters Using the Touch Screen (For Windows 7 touch screen models only) Using the Touch Launcher (For Windows 7 touch screen models only) Using the Touch Supporter (For Windows 7 touch screen models only) Using the camera Keyboard (Optional) Micro SD Card Slot (Optional) Connecting an External Display Device Connecting an External Digital Device Adjusting the Volume Wired Network (Optional) 63 67 Wireless Network (Optional) Using the Slate PC Dock (Optional) Chapter 3. Settings and Upgrade 71 73 74 76 77 LCD Brightness Control Easy Settings (Optional) BIOS Setup Changing the Boot Priority Battery Chapter 4. Backup / Restore 83 Samsung Recovery Solution (Optional) Chapter 5. Appendix 96 98 100 115 116 118 122 Important Safety Information Replacement Parts and Accessories Regulatory Compliance Statements WEEE Symbol Information Product Speciications Glossary Index Chapter 1. Getting Started Before You Start Safety Precautions Proper Posture During Computer Use 21 Overview 24 Turning the Computer On and Of 28 Chapter 1. Getting Started Before You Start Before reading the User Guide, irst check the following information. • Optional items, some devices and software referred to in the User Guide may not be provided and/or changed by upgrade. Note that the computer environment referred in the User Guide may not be the same as your own environment. • The pictures used for the cover and the main body in the User Manual are those of the representative model of each series and may difer from the actual appearance of the product. • This guide decribes procedures for using both the mouse and the touch screen. • The User Guide describes information on the basis of the touch screen. • This manual has been written for the Windows 7 operating system. The descriptions and igures may difer depending on the installed operating system. • The User guide supplied with this computer may vary depending on your model. Using the software • The software described in the main text can be launched using the following menu path. - Start > All Programs - Start > All Programs > Samsung • When the programs are not installed, select Samsung Recovery Solution > System Software to install the programs. (Only for models supplied with Samsung Recovery Solution) Safety Precaution Notations Icon Notation Description Warning Failure to follow instructions marked with this symbol, may cause personal injury and or fatality. Caution Failure to follow instructions marked with this symbol, may cause slight injury to yourself or damage your property. Chapter 1. Getting Started Before You Start Text Notations Icon Precautions for Operating System Support Notation Description Caution Content included in this section includes information required about the function. Note Content included in this section includes helpful information to use the function. If a problem occurs because of the reinstallation of other operating systems(OS) or a previous version of an OS pre-installed on this computer, or a software that does not support the OS, the company will not provide technical support, a replacement or refund, and if our service engineer visits you due to this problem, a service charge will be applied. Performance Restrictions Copyright © 2011 Samsung Electronics Co., Ltd. Samsung Electronics Co., Ltd. owns the copyright of this manual. No part of this manual may be reproduced or transmitted in any form or by any means, electronic or mechanical, without the consent of Samsung Electronics Co., Ltd. The information in this document is subject to change without notice due to improving the performance of the product. Samsung Electronics shall not be liable for any data loss. Please take care to avoid losing any important data and backup your data to prevent any such data loss. Online games and some games(3D,2D) may not be supported and Full HD video and some high bit rate HD video playback may be slow and stutter on this computer. Before You Start Chapter 1. Getting Started About the Product Capacity Representation Standard About the capacity representation of the storage About Memory Capacity Representation The capacity of the storage device (HDD, SSD) of the manufacturer is calculated assuming that 1KB=1,000 Bytes. The memory capacity reported in Windows is less than the actual capacity of memory. However, the operating system (Windows) calculates the storage device capacity assuming that 1KB=1,024 Bytes, and therefore the capacity representation of the HDD in Windows is smaller than the actual capacity due to the diference in capacity calculation. (E.g. For a 80GB HDD, Windows represents the capacity as 74.5GB, 80x1,000x1,000x1,000 byte/(1,024x1,024x1,024)byte = 74.505GB) This is because BIOS or a video adapter uses a portion of memory or claims it for further use. (E.g. For 1GB(=1,024MB) memory installed, Windows may report the capacity as 1,022MB or less) In addition, the capacity representation in Windows may be even smaller because some programs such as Recovery Solution may reside in a hidden area of the HDD. For more information, refer to the Samsung Recovery Solution section. Safety Precautions For your security and to prevent damage, please read the following safety instructions carefully. Since this is commonly applied to Samsung Computers, some pictures may difer from actual products. Chapter 1. Getting Started Keep a distance of 15cm or more between the computer and the wall and do not place any objects between them. This may increase the internal temperature of the computer and may cause an injury. Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Installation Related Do not install the computer on a slant or a place prone to vibrations, or avoid using the computer in that location for a long time. This increases the risk that a malfunction or damage to the product will occur. Do not install the product in places exposed to humidity such as a bathrooms. Avoid exposing any part of your body to the heat from the computer vent or AC adapter for a long time when the computer is on. There is a danger of electric shock. Use the product within the operating conditions speciied in the Manufacturers User Guide. Exposing a part of your body close to the heat from the vent or AC adapter for long periods of time may cause a burn. Keep the plastic bags out of the reach of children. There is a danger of sufocation. Avoid blocking the vent at the bottom or side of the computer when using it on a bed or cushion. If the vent is blocked, there is a danger of damaging the computer or overheating the inside of the computer. NB Ver 2.7 Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1. Getting Started If the power cord or power outlet makes a noise, disconnect the power cord from the wall outlet and contact a service center. There is a danger of electric shock or ire hazard. Power Related Do not use a damaged or loose main plug or power cord or power outlet. The power plug and wall outlet igures may difer depending on the country speciications and the product model. Do not touch the main plug or power cord with wet hands. There is a danger of electric shock. Do not exceed the standard capacity (voltage/current) of a multiplug or power outlet extension when using it for the product. There is a danger of electric shock or ire hazard. There is a danger of electric shock or ire hazard. Plug the power cord irmly into the power outlet and AC adapter. Failure to do so may cause ire hazard. Do not unplug the power cord by pulling the cable only. If the cord is damaged, it may cause electric shock. Do not bend the power cord excessively or do not place a heavy object over the power cord. It is especially important to keep the power cord out of reach of infants and pets. If the cord is damaged, it may cause electric shock or ire. Chapter 1. Getting Started Safety Precautions Warning AC Adapter Usage Precautions Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Connect the power cord to an outlet or multiple power plug (extended cable) with a ground terminal. Failure to do so may result in electric shock. If water or a foreign substance enters the power jack, adapter or computer, immediately separate the power cord and battery and call the service center. Damage to the device within the computer may cause electric shock or ire hazard. Keep the power cord or outlet clean so that they are not covered with dust. Failure to do so may result in ire. Connect the power cord to the AC adapter irmly. Otherwise, there is a danger of ire due to an incomplete contact. Use only the AC adapter supplied with the product. Using another adapter may cause the screen to licker. Do not place heavy objects or step onto the power cord or AC adapter to avoid damaging the power cord or AC adapter. If the cord is damaged, there is a danger of electric shock or ire. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Battery Usage Related Please charge the battery fully before using the computer for the irst time. Keep the battery out of the reach of infants and pets, as they could put the battery into their mouths. There is a danger of electric shock or choking. Use an authorized battery and AC adapter only. Please use an authorized battery and adapter approved by Samsung Electronics. Unauthorized batteries and adapters may not meet the proper safety requirements and may cause problems or malfunctions and result in an explosion or ire. Chapter 1. Getting Started Do not use the computer in a badly ventilated location such as on bedding, on a pillow or cushion, etc, and do not use it in a location such as room with loor heating as it may cause the computer to overheat. Take care that the computer vents (on the side or the bottom) are not blocked especially in these environments. If the vents are blocked, the computer may overheat and it may cause a computer problem, or even an explosion. Do not use the computer in a humid location such as a bathroom or sauna. Please use the computer within the recommended temperature and humidity range (10~32ºC, 20~80% RH). Do not close the LCD panel and put the computer into your bag to move it when it is still turned on. If you put the computer into your bag without turning it of, the computer may overheat and there is a danger of ire. Shut the computer down properly before moving it. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Chapter 1. Getting Started 10 Cutting the power to the internal battery (for corresponding models only.) Never heat the product(or battery) or put the product(or battery) into a ire. Do not put or use the product(or battery) in a hot location such as a sauna, inside a vehicle exposed to the heat, and so on. There is a danger of an explosion or ire. Take care not to allow metal objects such as a key or clip to touch the battery terminal (metal parts). If a metal object touches the battery terminals, it may cause excessive current low and it may damage the battery, or result in a ire. If liquid leaks out of the product(or battery) or there is a funny smell coming from the product(or battery), remove the the product(or battery) the computer and contact a service center. There is a danger of an explosion or ire. To use the computer safely, replace a dead battery with a new, authorized battery. • For products with built-in batteries, customers cannot remove the battery. • In the case of looding, lightning or explosions, you can cut the battery power by inserting an object such as a paper clip into the [Emergency Hole] at the bottom of the computer. • Disconnect the AC adapter and insert an object such as a paper clip into the hole at the bottom of the computer to cut the battery power. In the case of looding, lightning or explosions, cut the battery power, do not reconnect the AC adapter, and immediately contact Samsung Electronics so that the appropriate countermeasures can be taken. Chapter 1. Getting Started Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. • Thereafter, if you connect the AC adapter, the battery power will be supplied again. • Do not cut the battery power under normal conditions. • This may result in data loss or a product malfunction. The location of the Emergency Hole may difer depending on the model. 11 Usage Related Disconnect all cables connected to the computer before cleaning it. If your notebook is external & removable battery type, remove the external battery. There is a danger of electric shock or damage to the product. Do not connect a phone line connected to a digital phone to the modem. There is a danger of a electric shock, ire or damage to the product. Do not place any container illed with water or chemicals over or near the computer. If water or chemicals enter the computer, this may cause ire or electric shock. If you drop or damage the computer, separate the power cord and battery and ask the service center to perform a safety check. Using a broken computer may cause electric shock or ire hazard. Chapter 1. Getting Started Safety Precautions Warning 12 Upgrade Related Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Avoid direct sunlight when the computer is in an air-tight location such as inside a vehicle. There is a danger of a ire hazard. The computer may overheat and also present opportunity to thieves. Do not use your notebook PC for long periods of time while any part of your body is making direct contact with it. The temperature of the product may increase during normal operation. This may result in harming or burning your skin. Never disassemble the power supply or AC adapter. There is a danger of electric shock. When removing the RTC (Real Time Clock) battery, keep it out of the reach of children as they could touch and/or swallow it. There is a danger of choking. If a child has swallowed it, contact a doctor immediately. Use only authorized parts (multiplug, battery and memory) and never disassemble parts. There is a danger of damaging the product, electric shock or ire hazard. Shut down the computer and disconnect all cables before disassembling the computer. If there is a modem, disconnect the phone line. If your notebook is external & removable battery type, remove the external battery. Failure to do so, may cause electric shock. Safety Precautions Warning Failure to follow instructions marked with this symbol may cause personal injury and even fatality. Security and Movement Related Follow the instructions for the relevant location (e.g. airplane, hospital, etc.) when using a wireless communication device (wireless LAN, Bluetooth, etc.). Avoid exposing a drive to magnetic ields. Security devices with magnetic ields include airport walk-through devices and security wands. The airport security devices that check carry-on luggage, such as conveyor belts, use x-rays instead of magnetism and will not damage a drive. Chapter 1. Getting Started When carrying the notebook computer with other items, such as the adapter, mouse, books etc, take care not to press anything against the notebook computer. If a heavy object is pressed against the notebook computer, a white spot or stain may appear on the LCD. Therefore, take care not to apply any pressure to the notebook. In this case, place the notebook computer in a separate compartment away from the other objects. 13 Chapter 1. Getting Started Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. 14 Battery Usage Related Dispose of worn-out batteries properly. • There is a danger of ire or explosion. Installation Related Do not block the ports (holes), vents, etc. of the product and do not insert objects. Damage to a component within the computer may cause electric shock or ire. When using the computer with it lying on its side, place it so that the vents face upwards. Failure to do so, may cause the internal temperature of the computer to rise and the computer to malfunction or halt. Do not place a heavy object over the product. This may cause a problem with the computer. In addition, the object may fall and cause injury, or damage the computer. • The battery disposal method may difer depending on your country and region. Dispose of the used battery in an appropriate way. Do not throw or disassemble the battery and do not put it into water. This may cause an injury, ire or explosion. Use only a battery authorized by Samsung Electronics. Failure to do so may cause an explosion. Avoid contact with metal objects such as car keys or clips when keeping or carrying a battery. Contact with a metal may cause excessive current and a high temperature and may damage the battery or cause a ire. Charge the battery according to the instructions in the manual. Failure to do so, may cause an explosion or ire from damage to the product. Do not heat the product(or battery) or expose it to heat (e.g. inside a vehicle during the summer). There is a danger of explosion or ire. Chapter 1. Getting Started Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Usage Related Do not place a candle, light cigar, etc. over or on the product. There is a danger of ire. Use a wall outlet or multi-plug with a grounding part. 15 Connect only permitted devices to the connectors or ports of the computer. Failure to do so, may cause electric shock and ire. Close the LCD panel only after checking if the notebook computer is turned of. The temperature may rise and it may cause overheating and deformation of the product. Do not press the Eject Button while the Floppy Disk/CD-ROM drive is in operation. Failure to do so may cause electric shock hazard. You might lose data and the disk might be suddenly ejected and could cause an injury. Make sure to have the product tested by a safety service engineer after repairing the product. Take care not to drop the product while using it. Authorized Samsung Repair Centers will carry out safety checks after a repair. Using a repaired product without testing it for safety may cause an electric shock or ire. This may cause personal injury or loss of data. Do not touch the antenna with electricity facility such as the power outlet. In case of lightning, immediately turn the system of, disconnect the power cord from the wall outlet and phone line from modem. Do not use a modem or phone. There is a danger of electric shock. There is a danger of electric shock or ire. Failure to do so, may cause damage to the product. Do not use your computer and AC-Adapter on your lap or soft surfaces. If the computer temperature increases, there is a danger of burning yourself. When handling computer parts, follow the instructions on the manual supplied with the parts. Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Chapter 1. Getting Started 16 Do not place your face close to the Optical Disk Drive tray when it is operating. There is a danger of injury due to an abrupt ejection. Check CDs for cracks and damage prior to use. If the computer emits smoke, or there is a burning smell, disconnect the power plug from the wall outlet and contact a service center immediately. If your notebook is external & removable battery type, remove the external battery. There is a danger of ire. Do not use a damaged or modiied CD/Floppy Disk. There is a danger of damaging the product or personal injury. Do not insert your ingers into the PC Card Slot. There is a danger of injury or electric shock. Use recommended computer cleansing solution when cleaning the product and only use the computer when it is completely dried. Failure to do so may cause electric shock or ire. Emergency disk eject method using paperclip should not be used while the disk is in motion. Make sure to use the emergency disk eject method only when the Optical Disk Drive has stopped. There is a danger of injury. It may damage the disc and cause disorder of device and injury of user. Chapter 1. Getting Started Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Upgrade Related Take care when touching the product or parts. The device may be damaged or you may be injured. Security and Movement Related When moving the product, turn the power of and separate all connected cables irst. The product might be damaged or users may trip over the cables. For long periods of not using the notebook computer, discharge the battery and preserve as it is detached. (For external & removable battery type) The battery will be preserved at its best condition. Take care not to throw or drop a computer part or device. This may cause injury or damage to the product. Do not operate or watch the computer while driving a vehicle. Make sure to close the computer cover before connecting the power after a reassembly. There is a danger of a traic accident. Please concentrate on driving. There is a danger of electric shock if your body touches an internal part. Use parts authorized by Samsung Electronics only. Failure to do so, may cause ire or damage the product. Never disassemble or repair the product by yourself. There is a danger of electric shock or ire. To connect a device that is not manufactured or authorized by Samsung Electronics, enquire at your service center before connecting the device. There is a danger of damaging the product. 17 Safety Precautions Caution Failure to follow instructions marked with this symbol may cause slight injury or damage to the product. Cautions on Preventing Data Loss (Hard Disk Management) Take care not to damage the data on a hard disk drive. • A hard disk drive is so sensitive to external impact that an external impact may cause loss of data on the surface of the disk. • Take extra care, because moving the computer or an impact on the computer when it is turned on may damage the data of the hard disk drive. • The company is not liable for any loss of data on the hard disk drive. Chapter 1. Getting Started 18 Causes that may damage the data of a hard disk drive and the hard disk drive itself. • The data may be lost when an external impact is applied to the disk while disassembling or assembling the computer. • The data may be lost when the computer is turned of or reset by a power failure while the hard disk drive is operating. • The data may be lost and irrecoverable due to a computer virus infection. • The data may be lost if the power is turned of while running a program. • Sudden impact or movement to the computer while the hard disk drive is operating, may cause iles to be corrupted or bad sectors on the hard disk. To prevent data loss due to damage to the hard disk drive, please backup your data frequently. Chapter 1. Getting Started Safety Precautions Using the power supply in an airplane Since the power outlet type difers depending on the type of airplane, connect the power appropriately. Since the representative igures of the power plug and the auto adapter are used, they may difer from the actual parts. 19 When using the AC power plug Connect the power plug pins perpendicular into the center of the power outlet. • If the plug pins are not inserted into the center of the holes, the plug pins are only inserted up to half their length. In this case, reconnect the power plug. • You have to insert the power plug into the outlet when the power indicator (LED) of the power outlet is lit green. If the power is connected properly, the power indicator (LED) remains green. Otherwise, the power indicator (LED) is turned of. In this case, unplug the power, check if the power indicator (LED) is green, and then reconnect the power plug. Power Indicator (LED) Center Holes 220V Power Plug 110V Power Plug Good Example Wrong Example Chapter 1. Getting Started Safety Precautions When using the auto adapter When the cigar socket is provided, you have to use the auto adapter (optional). Insert the cigar plug of the auto adapter into the cigar socket and connect the DC plug of the auto adapter to the power input port of the computer. Auto Adapter DC Plug Cigar Plug In-light Cigar Socket When using the Airplane Charging Converter Depending on the airplane, you have to use the auto adapter and charging converter. Connect the airplane charging converter (optional) to the auto adapter (optional) and then insert the airplane power input jack into the power outlet. Charging Converter Connect the airplane power input jack to the power outlet of the airplane. this end to 1 Connect the auto adapter. 20 Chapter 1. Getting Started Proper Posture During Computer Use 21 Maintaining a proper posture during computer use is very important to prevent physical harm. • Do not use the computer while you are lying down, but only while you are sitting down. The following instructions are about maintaining a proper posture during computer use developed through human engineering. Please read and follow them carefully when using the computer. • Do not use the computer on your lap. If the computer temperature increases, there is a danger of burning yourself. • Work while keeping your waist straight. Otherwise, the probability of (RSI: Repetitive Strain Injury) from repeated operations may increase and serious physical harm may be caused. • Use a chair with a comfortable back. • Keep the center of your leg weight not on the chair but on your feet when you are sitting on a chair. • The instructions in this manual have been prepared so that they can be applied within the coverage of general users. • To use the computer while talking over the telephone, use a headset. Using the computer with the phone on your shoulder is bad for posture. • Keep frequently used items within a comfortable work range (where you can reach them with your hands). • If the user is not included in the coverage, the recommendation is to be applied according to the user’s needs. Proper Posture Adjust the heights of desks and chairs appropriate to your height. The heights are to be adjusted so that your arm forms a right angle when you place your hand over the keyboard while sitting down on a chair. Adjust the height of chair so that your heel is comfortably placed on the loor. Chapter 1. Getting Started Proper Posture During Computer Use Eye Position Hand Position Keep the monitor or LCD away from your eyes by at least 50cm. Keep your arm at a right angle as shown by the igure. • Adjust the height of the monitor and the LCD screen so that its top height is equal to or lower than your eyes. • Avoid setting the monitor and LCD excessively bright. • Keep the monitor and LCD screen clean. • If you wear glasses, clean them before using the computer. • When entering contents printed on a paper into the computer, use a static paper holder so that the height of the paper is almost equal to that of the monitor. 22 • Keep the line from your elbow to your hand straight. • Do not place your palm over the keyboard while typing. • Do not hold the mouse with excessive force. • Do not press the keyboard, touchpad or mouse with excessive force. • It is recommended connecting an external keyboard and mouse when using the computer for long periods of time. Chapter 1. Getting Started Proper Posture During Computer Use Volume Control (Headphones and Speakers) Use Time (Break Time) Check your volume irst to listen to music. • 23 Take a break for 10 minutes or more after a 50-minute period when working for more than one hour. Illumination Check your volume! • Check if the volume is too loud before using headphones. • It is not recommended using headphones for long periods of time. • Any deviation from the equalizer default setting could cause hearing impairment. • The default setting can be changed through software and driver updates without your intervention. Please check the equalizer default setting before irst usage. • Do not use the computer in dark locations. The illumination level for computer use must be as bright so for reading a book. • Indirect illumination is recommended. Use a curtain to prevent relection on the LCD screen. Operation Condition • Do not use the computer in hot and humid locations. • Use the computer within the allowed temperature and humidity range speciied in the User Guide. Chapter 1. Getting Started Overview Front View • The pictures used for the cover and the main body in the User Manual are those of the representative model of each series. Therefore the colors and appearance of the pictures may difer from the actual appearance of the product depending on the model. Camera (Optional) 24 Using this camera, you can take still pictures and record video. This sensor detects the ambient illumination around the PC. Illumination Sensor • The actual color and appearance of the computer may difer from the pictures used in this guide. If the ambient illumination decreases, the touch screen brightness is set to low. Conversely, if the ambient illumination increases, the touch screen brightness is set to high. The screen images are displayed here. 3 Touch Screen You can switch to Windows Desktop mode or touch mode. • Press the button once: Shows the Windows Desktop screen. This works as a touch screen in models that support touch screens (Optional). Home button • Press and hold the button once for a short while: Launches the Touch Launcher. • Press the button twice: Performs the function of pressing the windows and tab key combination. • Press and hold the button for 4 seconds + press the power button: Performs the function of pressing the ctrl + alt + del key combination. Chapter 1. Getting Started Overview 25 Right View Power Button / Power Button LED Turns the computer on and of. When the computer is on, the power button LED is lit. 2 Rotation Lock Locks the screen rotation so that the screen does not automatically rotate according to the orientation function of the product. SIM Card Slot (Optional) This slot is for SIM cards. Chapter 1. Getting Started Overview 26 Left View 1 USB Port You can connect USB devices to the USB port such as a keyboard/mouse, digital camera, etc. Ear-set / headset Jack 3 Volume Control Button This is the jack for connecting an earset or headset. Controls the volume. This is the port for a micro HDMI. You can enjoy digital video and Micro Digital Video / audio by connecting the computer 4 Audio Port (Micro HDMI) to a TV. (Optional) You can connect a VGA adapter (optional). 5 DC Jack A jack to connect the AC adapter that supplies power to the computer. Chapter 1. Getting Started Overview Top View 27 Rear View 1 Microphone You can use the built-in microphone. Micro SD Card Slot This slot is for micro SD cards. (Optional) Bottom View 1 Camera (Optional) Using this camera, you can take still pictures and record video. If you replace the bottom of the product, the model name, serial number and some logos etched into the bottom of the product will no longer be there. For more information, talk to a service engineer. Slate PC Dock Port (Optional) This port is for external devices (Slate PC Dock (optional)). Chapter 1. Getting Started Turning the Computer On and Of 28 Entering Sleep mode Turning the computer on Connect the AC adapter. When the computer is turned on, press the computer’s power button once briely. Press the Power button to turn the computer on. If the computer enters power-saving mode, the power button LED blinks blue. Power button LED is lit while the computer is turned on. To wake the computer up, briely press the Power button of the computer again. LED Chapter 1. Getting Started Turning the Computer On and Of Using the Touch Logon function Using the Touch Logon program, you can easily log on using your ingers. 29 If you touch the Windows logon password, the Tablet PC input panel appears. If the Tablet PC input panel does not appear, press the keyboard icon at the bottom left of the screen. Coniguring the Touch Logon To use the Touch Logon function, you have to conigure the Touch Logon function in the Windows logon screen. Press the power button to turn the computer on. If the Windows logon screen appears, select the account for which you will conigure the Touch Logon function and check the Enable Touch Logon option. Touch the corresponding buttons in the Tablet PC input panel to enter the Windows password. Chapter 1. Getting Started Turning the Computer On and Of When you have inished entering the password, press 30 Set the Touch Logon password. Touch the 4 digits to be used as the password. When you have inished entering the password, press Next. Start coniguring the Touch Logon settings. Select a Touch Logon background screen. Select a background screen by touching it and then touch Next. Re-enter the Touch Logon password. Touch the password digits again. When you have inished entering the password, press Next. The Touch Logon setting has been completed. You can now use the Touch Logon function when you logon next. Chapter 1. Getting Started Turning the Computer On and Of 31 When you do not have a Windows account password Using the Touch Logon 1. Click Start > All Programs > Samsung > Touch Logon > Touch Logon Options. Logging on to the Windows logon screen by touch 2. Select the Enable Touch Logon item and click OK. If the Windows logon screen appears, press the account which you want to log into by touch. Touch Unlock at the bottom of the screen and then drag it to the top of the screen. 3. Select a background for the touch logon function by touching the background of your choice and click Next. The touch logon settings have been completed. Press the power button to turn the computer on. Chapter 1. Getting Started Turning the Computer On and Of Touch the Touch Logon password and sequentially drag them to the Touch Logon input ield. If there is no conigured Windows account password, it is immediately Unlocked without requiring you to enter a password. 32 Disabling/changing the Touch Logon function Using the Touch Logon Options, you can enable, disable and conigure the Touch Logon function. Click Start > All Programs > Samsung > Touch Logon > Touch Logon Options. After launching the Touch Logon Options, you can conigure, disable or change the Touch Logon function. If you register, remove or change the Windows password in the User Accounts item in the Control Panel, the Touch Logon function is disabled. Turning the Computer On and Of Turning the computer of • Save all your data before clicking on Shut down. • These descriptions are written based on Windows 7, the latest operating system. Therefore, some descriptions and igures may difer from your operating system. But as the usage is similar to other Windows operating systems, you can use these descriptions for reference. > Shut down mode 33 If the computer cannot be shut down due to a system error, press and hold the power button for at least 4 seconds to shut it down by force. • Since the procedures to turn the computer of may difer depending on the installed operating system, please turn the computer of according to the procedures for the purchased operating system. Click Start computer. Chapter 1. Getting Started to shutdown the Please note that the system diagnosis program may run when you turn the computer on after you have shut the computer down by holding the power button down. Chapter 2. Using the computer Using the Touch Screen (For Windows 7 touch screen models only) 35 Entering Letters Using the Touch Screen (For Windows 7 touch screen models only) 41 Using the Touch Launcher (For Windows 7 touch screen models only) 43 Using the Touch Supporter (For Windows 7 touch screen models only) 44 Using the camera 46 Keyboard (Optional) 48 Micro SD Card Slot (Optional) 50 Connecting an External Display Device 52 Connecting an External Digital Device 57 Adjusting the Volume 58 Wired Network (Optional) 60 Wireless Network (Optional) 63 Using the Slate PC Dock (Optional) 67 Using the Touch Screen (For Windows 7 touch screen models only) Chapter 2. Using the computer You can use the computer using the touch screen only, without using the keyboard and mouse. The touch screen function is only supported for models which have the function installed at the factory. • Use only your ingers for the touchscreen. Other tools such as a ballpoint pen are not recognized and using sharp objects may damage or scratch the surface of the LCD. • If a digitizer pen (optional) is provided, you can use the digitizer pen instead. • Since touching the touch screen with a conductive material such as a metallic object may cause a malfunction, take care not to touch the screen with this kind of object. Using the Touch Screen • This function is provided by touch screen models running Windows 7 and will only work for some applications. • In addition, note that the supported functions are dependant on the application. • You can use the digitizer pen (optional) as you use your ingers. The descriptions here are for using your ingers. Learning basic touch screen operations Touch Operation Single-tap (click) Double-tap (double-click) Function To select an item, tap over the item with your inger. This is the same as leftclicking once with a mouse. To run an item, quickly tap the item twice with your inger. This is the same as double-clicking once. 35 Using the Touch Screen (For Windows 7 touch screen models only) Touch Operation Chapter 2. Using the computer 36 Function Moving (drag) To drag an item, place your inger over the item and drag it to the new location. This is the same as dragging using a mouse. Press and take off (mouse right-click) If you press and hold the screen for approximately 3 seconds, the pop-up menu appears. This is the same as right-clicking with the mouse. Tapping two fingers in succession (mouse right-click) Tap with one inger and then tap with another inger while holding down the irst inger. A pop-up menu appears. This is equivalent to right-clicking a mouse. Move your inger up and down, left or right to move on the screen accordingly. Moving finger (scroll) This is the scroll function of the mouse. This operation may perform a diferent function depending on the application program. Drag two fingers apart / together (zoom-in/zoom-out) Drag apart or together two ingers to zoom-in or -out of a picture or image. Flick one finger fast Flick one inger quickly to the left or right in order to move to the previous or next page. Tapping three fingers (Launching the Touch Supporter) Tapping three ingers simultaneously launches the touch support program. Using the Touch Screen (For Windows 7 touch screen models only) Touch Operation Tapping five fingers (Launching the keyboard program) Chapter 2. Using the computer Function Tapping ive ingers simultaneously launches the keyboard program. Learning about touch operations Select Start > Control Panel > Hardware and Sound > Pen and Touch > Flicks tab and select Practice using licks to learn about the various touch operations. Using the digitizer pen (optional) If a digitizer pen is supplied with the product, you can operate the computer with the pen instead of your ingers. You can use the digitizer pen as you would use your ingers. Digitizer pen structure and functions Pen eraser Pen button Pen tip Ring Pen tip 37 Using the Touch Screen (For Windows 7 touch screen models only) Pen tip This performs the function of your inger tip when you touch the screen. If you press the pen button when the digitizer pen tip is on the screen, circles appear around the pointer on the screen. Touch the screen with the digitizer pen while holding down the pen button. Pen button Chapter 2. Using the computer 38 Replacing the pen tip If the pen tip is damaged, you can replace the pen tip as follows: Hold the pen tip by inserting it into the hole of the ring and remove the tip by pulling it out. Insert the new pen tip into the digitizer pen. This performs the right-click function. Erases letters with the top end of the digitizer Pen. This performs the function of an eraser. Pen eraser Take care so that the pen tip does not spring out when taking it out. Using the Touch Screen (For Windows 7 touch screen models only) Screen Calibration When you use the touch screen for the irst time or the pointer on the screen does not precisely match the points you touch, calibrate the touch screen using the Tablet PC Settings menu. Click Start > Control Panel > Hardware and Sound > Tablet PC Settings > Display > Calibrate. 39 Select the screen type to calibrate. If the Calibration screen appears, touch the point represented by the “+” mark and then remove your inger. The “+” mark appears sequentially from the top left to the bottom right of the screen. The calibration process for the touch screen may difer depending on the operating system and may not be available in some operating systems. The following descriptions assume the Windows 7 operating system. Chapter 2. Using the computer When the Do you want to save the calibration data? window appears, click Yes. The touch screen input points are calibrated. Using the Touch Screen (For Windows 7 touch screen models only) Touch screen use precautions • Use the touch screen with clean and dry hands. In a humid environment, remove the moisture from your hands and the touch screen surface before use. • Avoid directly spraying liquid cleansing solution onto the touch screen. The liquid solution may enter the touch screen through the bottom edge. When using a liquid cleansing solution, dampen a cloth in the solution and clean the screen with the cloth (a cleansing solution or cloth containing abrasives may damage the touch screen.) • Do not apply a severe impact to the touch screen or press the screen with a sharp object such as a ball-point pen. This may damage the touch screen. • If your inger only touches the touch screen slightly, your touch may not be recognized. • If you wish to use a pen, please use the provided digitizer pen (optional). Otherwise, the computer may not work properly. • Take care that you do not drop the digitizer pen as this may damage the pen tip. • When pressing the touch screen, press over an item precisely taking care not to press other items. • Chapter 2. Using the computer 40 If the touch screen is contaminated by a foreign substance such as a bug or water, the touch screen will not work properly. Entering Letters Using the Touch Screen Chapter 2. Using the computer (For Windows 7 touch screen models only) You can enter letters using either the Tablet PC input panel. The procedures to enter letters for the Notepad will be described below as an example. 41 Writing Pad Mode Touch keyboard Tools Close Using the Tablet PC input panel The Tablet PC Input Panel is an on-board character input panel provided by Windows. You can enter letters in 2 ways through the Tablet PC Input Panel. Launching the Tablet PC input panel Click Start > All Programs > Accessories > Notepad to launch Notepad. If you touch the Notepad screen with your inger, the appears on the Notepad with the cursor. If you touch the Panel appears. with your inger, the Tablet PC Input If you touch the touch screen with your inger, the Tablet PC Input Panel tab appears with the cursor at the bottom left on the Desktop. If you touch the Tablet PC Input Panel tab, the Tablet PC Input Panel appears. If the Tablet PC Input Panel Tab does not appear, click start > Control Panel > Hardware and Sound > Tablet PC Settings > Other tab and select [Go to Input Panel Settings], select the “Use the Input Panel tab” in the Options window and then click OK. Entering Letters Using the Touch Screen (For Windows 7 touch screen models only) Entering letters using the touch keyboard Using the touch keyboard, you can enter letters by touching the corresponding keys on the keyboard that is displayed on the screen as you do with a normal keyboard. In the Tablet PC input panel, touch the touch keyboard icon Enter letters by touching the corresponding keys on the screen. Chapter 2. Using the computer 42 Entering letters with the writing pad (hand-writing input mode) In the touch screen, you can enter letters by directly writing letters with your inger on the writing pad input panel. In the Tablet PC input panel, touch the writing pad icon Write a letter in the input area of the writing pad in the touch screen and wait for a moment. Then the letter is converted to the most likely letter. If you touch the Insert button, the converted letter is entered. Modifying a letter Over-write a new letter over an incorrectly recognized letter above the letter and select a letter. or touch the Using the Touch Launcher (For Windows 7 touch screen models only) Touching the Launcher program enables you to easily play music and video iles and operate downloaded applications by touching the screen with your inger on models with a touch screen. • The Touch Launcher is only provided for models with a touch screen and the terms and conditions, as well as the appearance may difer depending on the model. • For programs to operate normally, the computer must be connected to the Internet. Using the Touch Launcher (Optional) Click Start > All Programs > Samsung > Play Touch and select Touch Launcher to launch it. No. Function Power Option Shows the remaining battery charge and the currently conigured battery mode. Wi-Fi Shows the Wi-Fi connection status. If the computer is connected to Wi-Fi, the connected AP name is displayed. ToDo (Things to do) Clock / Weather Shows the time and weather information for the conigured region. Edit Mode Add group, Add program From Desktop, Change wallpaper. 43 Description Creates/Displays the ToDo list You can create a list of things to do. Page Indicator Shows the position of the current page. To navigate the pages, click the Page Indicator or drag the screen to the left or the right. Program area Shows the program list. To launch a program, click the program icon. Chapter 2. Using the computer Using the Touch Supporter (For Windows 7 touch screen models only) This program helps you to use functions that cannot be easily used with touch operations more easily. No. Function Launching the Touch Supporter If you touch the screen with three ingers simultaneously the touch support program is launched. Hot key Show/Hide Hotkeys Copy Cut Paste To exit the Touch Supporter, click three ingers again. Delete Numeric Pad Undo Exit or touch the screen with 44 Description This performs the same function as the Ctrl key. If you touch the multiple-selection Multiple- function, the indicator is lit. When the selection multiple-selection is activated , and you touch iles with your inger one by one, all touched iles are selected. Copy Cut Multiple-selection Chapter 2. Using the computer Copies the selected item. Cuts the selected item. Paste Pastes the copied or cut item. Delete Deletes the selected item. Undo Cancels the last operation. Numeric pad If you touch the numeric pad button, the numeric and direction keyboard appears. Using the Touch Supporter (For Windows 7 touch screen models only) Using the Numeric Pad Click the Numeric Pad screen. If you touch the buttons of the Numeric Pad, the corresponding numbers or symbols are entered on the screen. . The Numeric Pad appears on the Switches the mode between the numeric and the direction key input modes To select direction key input mode, touch To select numeric key input mode, touch Chapter 2. Using the computer 45 Chapter 2. Using the computer Using the camera This product has 2 cameras(Optional). One is at the front and the other is at the back. Using the touch camera program, you can conveniently take a picture or record a video using touch operations. 46 Using the Camera program Click the Touch Launcher and launch the Camera. , video Select camera mode (camera Select the front or rear camera Minimize Exit Select the resolution. Take a picture or make a recording View the captured picture or video. Open the folder to save the ile with Explorer. Chapter 2. Using the computer Using the camera Touch the Select Front/Rear Camera to select either the front or the rear camera that you will use. To take a picture, select camera mode. To record a video, select video mode. Touch the Take a Picture record a video. You can view the picture or recorded video through the Preview function or the Open the saved folder with Explorer /Record to take a picture or • You can record up to 20 minutes of video. • If the free space of the computer reaches 500MB, video recording is stopped. When you take a picture • Do not take a picture or record a video without the consent of the person you are recording. • Do not take a picture or record a video when it is prohibited. • Do not take a picture or record a video where it may invade a person’s privacy. 47 Chapter 2. Using the computer Keyboard (Optional) Using the Bluetooth Wireless Keyboard 48 Remove the battery compartment cover at the back of the computer. Install the battery and close the cover. If you press and hold the keyboard power button for 3 seconds after starting the computer, the Bluetooth LED will blink in blue. Click You can connect and use an external type keyboard. This section describes how to connect a Bluetooth wireless keyboard provided optionally by Samsung Electronics. • Bluetooth is wireless communications technology that allows access to nearby devices such as another computer, a cell phone, printer, keyboard, mouse, etc. without a cable connection. • The Bluetooth supporting function is only available between devices (a computer, cell phone, PDA, printer, etc.) and the connection may be restricted according to the proile of the corresponding device. • The keyboard is optional and may not be provided depending on the model. > Bluetooth Devices > Add a Device. Keyboard (Optional) Select the keyboard to be connected and click Next. Enter the number displayed on the screen and press Enter. This will connect the keyboard. When the keyboard is connected, the blue Bluetooth LED of the keyboard is turned of. Chapter 2. Using the computer 49 Chapter 2. Using the computer Micro SD Card Slot (Optional) You can only use the micro SD card slot for micro SD cards. You can use micro SD cards as removable disks and conveniently exchange data with digital devices such as a digital camera, digital camcorder, MP3, etc. • You have to additionally purchase a micro SD card with the necessary capacity depending on your requirements. • You can use a micro SD card just like any data storage device. A copyright protection function is not supported. • Since a card may fall out and become lost when you move the computer, store it separately. • The igures used for the description are of a representative model. Therefore the igures may difer from the real ones. • These descriptions are written based on Windows 7, the latest operating system. Therefore, some descriptions and igures may difer from your operating system. But as the usage is similar to other Windows operating systems, you can use these descriptions for reference. Using the card Insert the card into the micro SD card slot in the marked direction. Micro SD Card Slot The card drive appears. Click Open folder and view iles. If the window does not appear, click Start > Computer. 50 Chapter 2. Using the computer Micro SD Card Slot (Optional) If a window asking to scan and change appears, click Continue Without Scanning. This will proceed to Step 2 above. 51 To format a memory card When using the memory card for the irst time, you must format the card before using it. Formatting a card deletes all data saved on the card. If the card includes data, backup the data before formatting it. You can save, move and delete data by double-clicking the corresponding drive. You can only use the card after formatting it. The device name of the card drive may difer depending on your computer model. To remove a memory card Press the card until it pops up, then pull it out by holding the end of the card. Click Start > Computer. Right-click over a card drive with the touchpad and select Format. Click Start to the formatting. • To use a card to exchange data with a digital device such as a digital camera, formatting the data using the digital device is recommended. • When you try to use a card, which is formatted in the computer, in another digital device, you may have to format the card again in the device. • If the write-protect tab is in the Lock position, you cannot format, write or delete data on the card. • Take care when you insert or remove a micro SD card. The micro SD card may be damaged when not treated carefully. Chapter 2. Using the computer Connecting an External Display Device If you connect an external display device such as a monitor, TV, projector, etc., you can view the picture on the wider screen of the external device when you give a presentation or watch a video or movie. 52 About the connection cable Users should additionally purchase the necessary connection cables. There is an analog monitor port (RGB) and a micro digital video and audio port (Micro HDMI). Since the visual quality is higher for Micro HDMI than VGA, if more than one port is available, connect the port that provides the higher visual quality. • Before you start, check the port and cable of the external display device and then connect the display device to the computer. • Due to restrictions of the operating system the DualView function is not supported for Windows 7 Starter. Analog Monitor (RGB) Cable HDMI to micro HDMI Cable Connecting to the monitor port (Optional) You can experience a wider screen by connecting the computer to a monitor, TV or projector with a monitor port. You can give better presentations by connecting the computer to a projector. The VGA adapter is optional and may not be provided depending on the model. Chapter 2. Using the computer Connecting an External Display Device Connect the VGA adapter to the USB port. Launch the Easy Settings, click Display > Display Settings and select a mode. Connect the VGA cable (15-pin) to the connected VGA adapter and then connect the other end of the VGA cable to the VGA port of the monitor or the TV. External Monitor TV Projector VGA Adapter • To use the function, the Easy Settings must be installed. Connect the power cord of the connected monitor, TV or projector and turn the power on. 53 • Alternatively, to set up dual view: Open the Display Settings window in the Control Panel, select Monitor 2 and select the Expand to it to this monitor checkbox to set dual view. For more detailed information, refer to the Windows online help. Chapter 2. Using the computer Connecting an External Display Device Connecting through the Micro HDMI port (Optional) • This is only supported for models that support a TV output port (HDMI). By connecting the computer to a TV with a HDMI port, you can enjoy both a high visual quality and a high sound quality. • When a TV provides more than one HDMI port, connect the computer to the DVI IN port. After connecting a TV through Micro HDMI, you have to conigure the screen and sound. You have to additionally purchase the HDMI to micro HDMI cable. • When connecting the computer to a TV, switch the external input mode of the TV to HDMI. Launch the Easy Settings, click Display > Display Settings and select a mode. Connect the HDMI to micro HDMI cable to the HDMI port of the TV. External Monitor HDMI to micro HDMI TV Projector 54 Chapter 2. Using the computer Connecting an External Display Device • External Monitor / TV is not supported in the DOS Command Prompt window. • Simultaneous output to all 3 (LCD + CRT + HDMI) is not supported. ► For Intel graphics cards • To use the function, the Easy Settings must be installed. Setting up HDMI TV video (Optional) If the Desktop screen displayed on the TV does not it to the TV screen, conigure it as follows depending on the graphics card. • You can view the graphics card type by selecting Device Manager > Display adapters and then clicking the + symbol. • The screen images and terms may difer from actual product depending on the computer model and driver version. 55 Right-click over the Desktop and select Graphics Properties. If a window appears where you can select the mode, select Basic Mode and click OK. Click Display > General Settings, select Customize Aspect Ratio in the Scaling ield, it the Desktop to the TV screen and click OK. Chapter 2. Using the computer Connecting an External Display Device 56 Setting up HDMI TV audio (Optional) You can conigure the sound of the computer to be played through the HDMI TV. You have to conigure the sound device in the Control Panel whenever you connect the HDMI TV in order to hear sound from the computer on the TV. The screen images and terms may difer from actual product depending on the computer model. Right-click over the Volume Control icon in the notiication area at the bottom right of the Desktop and select Playback Devices. (Alternatively, click the Control Panel > Hardware and Sound > Sound.) Change the setting to Digital Audio (HDMI), HDMI Device or Digital Output Device, click Set Default and click OK. • HDMI Output Device may not appear on the playback device list depending on the computer model. In this case, turn on the TV, connect the TV to the computer using a HDMI cable and then switch to HDMI or LCD+HDMI Clone or LCD+HDMI DualView mode using the Shortcut Key( ). • To use the hot keys, you have to use a keyboard. Please connect a keyboard irst. To listen to sound on the computer after disconnecting the HDMI TV, you have to set the Playback Device to Speakers. Connecting an External Digital Device You can save a ile stored on a device onto the computer by connecting a digital device such as a camera, camcorder or mobile phone to the computer and using the ile management functions. Chapter 2. Using the computer The Auto run window appears. Click Open folder and view iles. If the window does not appear, click Start > Computer. Connecting and using a camera or camcorder If a digital device such as a camera or camcorder is connected with the computer, it is recognized as a removable disk so that you can copy or move the iles on the device. Connect the USB port of the notebook computer and the USB port of the digital device such as a camera using the USB cable. • Both the computer and the digital device must be turned on. • You have to additionally purchase the USB cable necessary to connect the computer and the device. Camera 57 Double-click the corresponding drive. You can then save, move or delete data. Camcorder The device name of the card drive may difer depending on the model. Chapter 2. Using the computer Adjusting the Volume You can control the volume using the volume control buttons or the volume control program. 58 Using the Sound Recorder The procedures to record sound using the Windows Recorder are described below. Adjusting the volume with the buttons These descriptions are written based on Windows 7, the latest operating system. Therefore, some descriptions and igures may difer from your operating system. But as the usage is similar to other Windows operating systems, you can use these descriptions for reference. You can control the volume by pressing the volume control button on the left side of the computer. Adjusting the Volume using the Volume Adjustment Program You can also use the internal MIC. Right-click over the Volume icon Recording Device. Check if the microphone is set as the default recording device. on the taskbar and select If this is the case, it is already set as the default device. If not, right-click over the microphone and select Set default. Click the Volume icon on the taskbar and slide the volume control bar to adjust the volume. Mute Connect a microphone to the microphone jack. Click Start > All Programs > Accessories > Sound Recorder and click Start recording to start a recording. Chapter 2. Using the computer Adjusting the Volume Using SoundAlive The SoundAlive function enables you to experience more stereophonic sound using stereo speakers. • SoundAlive is only supported in Windows 7. ► Basic Mode Music Select this mode to listen to music. Movie Select this mode to watch a movie. Speech Emphasizes voice over other sounds. • The software programs provider may vary, depending on your computer model. • In addition, some pictures may difer from actual product depending on the computer model and software version. Right-click over the Volume Control icon in the notiication area at the bottom right of the Desktop and select Playback Devices. (Alternatively, click the Control Panel > Hardware and Sound > Sound.) Right-click over the Speakers and select Properties. Select the SoundAlive tab and select one of the modes. 59 Silver Silver mode is for people who have diiculty in hearing. ► Advanced Mode Finely tuned 25 presets are arranged on a square according to their relative sound characteristics. ► User Mode You can control a variety of sound efects. Connecting and using a Ear-set / headset Jack Using the Ear-set / headset jack Right-click over the Volume Control icon in the notiication area at the bottom right of the Desktop and select Playback Devices. (Alternatively, click the Control Panel > Hardware and Sound > Sound > Playback tab.) Select the Speakers (Realtek High Deinition Audio), click Set Default and click OK. Chapter 2. Using the computer Wired Network (Optional) A wired network is a network environment used for a company network or broadband internet connection at home. 60 Connect the LAN cable to the LAN cable port of the Slate PC Dock. Click Start > Control Panel > Network and Internet > Network and Sharing Center and click on Change adapter settings in the left menu pane. • The igures used for the description are of a representative model. Therefore the igures may difer from the real ones. • These descriptions are written based on Windows 7, the latest operating system. Therefore, some descriptions and igures may difer from your operating system. But as the usage is similar to other Windows operating systems, you can use these descriptions for reference. • To use a wired network, you have to connect the Slate PC Dock. The Slate PC Dock is optional and may not be provided depending on the model. Connect the Slate PC Dock to the Slate PC Dock port of the computer. Chapter 2. Using the computer Wired Network (Optional) Select Local Area Connection and click the right button of the touch pad and select Properties. 61 Select Internet Protocol Version 4(TCP/IPv4) from the list of Network Components and click Properties. The LAN Device name may difer depending on your computer’s Network Device. • The Network Component name may difer depending on the Operating System Installed. • To add a network component, click Install in the screen shown in the igure above. You can add clients, services, and protocols. Wired Network (Optional) Conigure the IP settings. When using DHCP, select Obtain an IP address automatically. To use a static IP address, select Use the following IP address, and set the IP address manually. Chapter 2. Using the computer 62 When connected to a 100Mbps/1Gbps wired LAN and the computer exits Sleep/hibernation mode, a message appears informing you of a connection to a 10Mbps/100Mbps wired LAN. This happens because when the computer exits standby/hibernate mode, restoring the network takes about 3 seconds. When the network is restored, it operates at 100Mbps/1Gbps. When system is running on battery, some time it takes about 20sec after inserting LAN cable to be able to connect to internet. This symptom happen as a result of power saving feature to reduce battery consumption. When system is running on battery, the Wired LAN speed is decreased automatically to reduce battery consumption. In such case, a 1Gbps /100Mbps LAN would function at 100Mbps/10Mbps speed. When not using DHCP, ask your network administrator for the IP address. When you have completed the settings, click the OK button. The network settings have been completed.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Copy, Extract, Print high-res XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Instance ID : uuid:b1e8bc9c-d79d-49bb-86bb-e73ff0fcc7d3 Document ID : adobe:docid:indd:832172a7-a1ec-11e0-ac85-82ffdb50dadc Rendition Class : proof:pdf Derived From Instance ID : 4b6055db-9d35-11e0-83da-d9eec77f8e08 Derived From Document ID : adobe:docid:indd:4b6055da-9d35-11e0-83da-d9eec77f8e08 Manifest Link Form : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream Manifest Placed X Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Y Resolution : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00 Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches Manifest Reference Instance ID : uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:50D66381170DDE119FB2F53A11564CCC, uuid:9b818aae-2f40-486a-aa88-2743822df6cb, uuid:FA9F4869AD7DDE11A22ADD1E4CB69882, uuid:B7376369865DDD11B56CD2C4DD843A9D, uuid:9A62BBAA105DDD118948C3EFE9EF1DC7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:f0702652-a9fb-487a-82f5-e46144651901, uuid:9002631CBB4DDF11AA1DEBFC72BE3CDC, uuid:B8376369865DDD11B56CD2C4DD843A9D, uuid:37BDAFEF7C61DD118ED2DF6B07DDBD52, uuid:9102631CBB4DDF11AA1DEBFC72BE3CDC, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:3CC95DE6D5F5DF118B0090E611470256, uuid:9762BBAA105DDD118948C3EFE9EF1DC7, uuid:F9A351C2135DDD118948C3EFE9EF1DC7, uuid:FAA351C2135DDD118948C3EFE9EF1DC7, uuid:E512656FF45DDD11A37DBA2AF6BA68C1, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:6BD4ECD01A24DE119ECDD15A8DF3F2D4, uuid:46E0C53B1F0ADE11A2758F8DBE5E495F, uuid:DEF02B1FA663DF1194E3F2D364023C51, uuid:DEF02B1FA663DF1194E3F2D364023C51, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:c7d33f82-2b36-4d81-9bd2-48fc1d317d80, uuid:7ab47244-c23f-4e0a-8c4d-3111cc767b5b, uuid:BB503195C8A8DE119B65D57C02A21B59, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:3EB1C134BAA2E0118342F7247EAC2069, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:130F59AB8CA3E011AB17F71094EE2BB3, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:771941BE4DF0DF119973900313DAB192, xmp.iid:771941BE4DF0DF119973900313DAB192, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, xmp.iid:771941BE4DF0DF119973900313DAB192, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:27acaa5f-ad85-467b-bfec-91773d3b12b7, uuid:27acaa5f-ad85-467b-bfec-91773d3b12b7, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287, uuid:CB49B275D163DF11B65D9A37D0CC8287 Manifest Reference Document ID : uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:4ED66381170DDE119FB2F53A11564CCC, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:4BD66381170DDE119FB2F53A11564CCC, uuid:3CCDE7E195EEDC11BD21C9977B4828CB, uuid:40CDE7E195EEDC11BD21C9977B4828CB, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:7e905469-81e4-4b00-8d2b-5fb2a91afc74, uuid:8F02631CBB4DDF11AA1DEBFC72BE3CDC, uuid:5D456E4E7EECDC11A85B862B884043FF, uuid:3ACDE7E195EEDC11BD21C9977B4828CB, uuid:63456E4E7EECDC11A85B862B884043FF, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:3CC95DE6D5F5DF118B0090E611470256, uuid:8A60B108A4ECDC11A85B862B884043FF, uuid:C66E0A98EBECDC118CE9940DE860D2B0, uuid:CB6E0A98EBECDC118CE9940DE860D2B0, uuid:ABC4BBFACDF0DC119D69EF9D6B367C93, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:69D4ECD01A24DE119ECDD15A8DF3F2D4, uuid:45E0C53B1F0ADE11A2758F8DBE5E495F, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:7DFECBE25A20DC11B0DEE7A943A14516, uuid:885a3b87-c02a-4f23-b9b9-ebf68bf4d261, uuid:9C209E58B4A8DE11BF59D0092434A19B, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:974363FF68A1E011A5F0F8C0293B43F5, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:98A27D73389EE011AA4ACE746B435270, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:771941BE4DF0DF119973900313DAB192, xmp.did:771941BE4DF0DF119973900313DAB192, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, xmp.did:771941BE4DF0DF119973900313DAB192, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:e1f3931a-bd62-49e3-818f-1a2b997d556b, uuid:e1f3931a-bd62-49e3-818f-1a2b997d556b, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287, uuid:CA49B275D163DF11B65D9A37D0CC8287 Create Date : 2011:07:12 18:51:55+09:00 Modify Date : 2011:08:25 08:56:35+08:00 Metadata Date : 2011:08:25 08:56:35+08:00 Creator Tool : Adobe InDesign CS3 (5.0.4) Thumbnail Format : JPEG Thumbnail Width : 256 Thumbnail Height : 256 Thumbnail Image : (Binary data 8490 bytes, use -b option to extract) Format : application/pdf Title : Nike-Tab_eng.indb Producer : Adobe PDF Library 8.0 Trapped : False GTS PDFX Version : PDF/X-3:2002 GTS PDFX Conformance : PDF/X-3:2002 Page Count : 63 Creator : Adobe InDesign CS3 (5.0.4)EXIF Metadata provided by EXIF.tools