Optoma APBELIVEU Bluetooth earphones User Manual

Optoma Corporation Bluetooth earphones Users Manual

Users Manual

1 User Manual Optoma NuForce Bluetooth BE Live5 In Ear Headphones Regulatory model name: APBELIVEU
2 Contents  WHAT’S IN THE BOX  BE LIVE5 EARPHONES  THE BASICS Charging your BE Live5 Checking battery level Bluetooth pairing Power On/ Power Off Wearing your BE Live5 Handling phone calls Listening to music Pairing with a laptop Pairing with a Mac  MISCELLANEOUS Multipoint connections Restoring factory settings Voice prompts list Disclaimer FCC Interference statement Specification
3 WHAT’S IN THE BOX BE Live5 earphones (with inline controller and microphone) 3pairs of silicon tips (in S/M/L) 2pair of foam tips (M/L) 3pairs of stabilizers (in S/M/L) Cable loop for adjusting the length of cable Pouch Charging cable (Micro-USB) Basic user’s manual Safety Instruction BE Live5 EARPHONES
4 1. Volume Up Button 2. Power/Function Button 3. Volume Down Button 4. LED Indicator 5. Charging port 6. Microphone
5 The BASICS Charging Your BE Live5 Although your BE Live5 in-ear headphones come with a partially charged battery, it is recommended that you fully charge your BE Live5 before first use. 1. Open the charge port cover on the in line controller. 2. The charge cable should be connected to the charge port and either to a PC or a dedicated USB charger. 3. When charging, the LED indicator is red. 4. LED Indicator turns blue once charging is complete. NOTE: It takes up to 1.5 hours to fully charge the BE Live5. Checking Battery Level 1 2 3 4
6 You can check the battery level of your BE Live5 with the LED indicator To check battery level: 1. Press the Power/Function, volume up, and volume down buttons simultaneously. 2. The LED indicator will flash red and blue simultaneously. The battery level will be indicated by the number of flashes, as described in the table below: Number of Flashes Battery Level Number of flashes Voice prompts(enable) 2 Battery low 3 Battery at 50% 5 Full battery NOTE: When the battery level is very low, you will hear a beep or a “Battery Low” voice prompt from your BE Live5 every 2 minutes when the estimated battery reserve remaining time is under 15minutes. IN ADDITION: 1. When the Voice prompts are switched off you will hear a beeping sound (A short double tone) every two minutes. 2. Users with iOS devices and some Android models will be able to view the battery status on their device’s display *On some Android and all Windows operated devices you cannot check the battery level for your BE Live5 when you listen to music, in the middle of a phone call or in pairing mode.
7 Bluetooth Pairing Using your BE Live5 for first time Pairing BE Live5 with source device 1. Press and hold the BE Live5’s Power/Function button for 4 seconds until the LED indicator light flashes blue/red. Your BE Live5 is now in pairing mode. 2. Turn on Bluetooth® on your source device, then select “Optoma NuForce BE Live5” once it appears on the device list. NOTE: Consult your source device’s user manual for instructions on activating Bluetooth. 3. Once successfully paired, the LED indicator will flash blue and you hear “Primary device connected” (when voice prompt enabled) from your BE Live5, or a beep if voice prompt is not enabled. Please note: A. You must always enter “Pair” mode from a powered-off state. 1 2 3
8 Otherwise, pushing the Power/Function button for more than 3 seconds from a powered-on state turns the BE Live5 off. B. If left inactive in pairing mode, your BE Live5 will automatically power off after 3 minutes. C. Your BE Live5 can store pairing information for up to eight devices. To pair additional devices to your BE Live5 ensure that your BE Live5 is not concurrently connected to any device, then repeat the steps 1,2,3 outlined above. In case where your BE Live5 have already stored pairing information for eight devices and a ninth device is paired, the stored information for the very first device will be deleted. Power On/Power Off To power on your BE Live5, press Power/Function button for about 2 seconds until the LED indicator flashes blue and you hear the “Power on” when voice prompt is activated or a beep if the voice prompt is not used. NOTE: Once you have successfully paired the BE Live5 to a Bluetooth-enabled device, the BE Live5 will automatically connect with that device once it is powered on again. For more information check “Bluetooth Pairing” section. If you have stored pairing information for multiple devices and more than one of those devices is Bluetooth enabled, the BE Live5 will automatically connect with the most recently paired device and will also enable multipoint connection.
9 For more information read section “Multipoint Connections”. To turn the BE Live5 to OFF, push Power/Function button for about 4 seconds until the LED indicator turns red and you hear the “Power off” ” when voice prompt be activated or a beep if the voice prompt is not used. Wearing Your BE Live5 To ensure a secure and comfortable fit when wearing your BE Live5: 1. Install the stabilizers on the BE Live5 after removing the ear tips already placed on the boxed new set.* 2. Select right size of ear tips and install tips on BE Live5. 3. Rotate the stabilizers and place the BE Live5 into each ear so that they are positioned comfortably. *Please note, 3 different sizes of Ear wings are provided to offer optimal user’s comfort Magnetic caps at the end of the earphones let users lock the earphones together and secure them around user’s neck for ease of use. Handling Phone Calls When your BE Live5 are connected to a Bluetooth-enabled smartphone you can handle your phone calls directly using your BE Live5 in ear headphones. The followings describe phone call options: Call option Status Action Answer a call Incoming call Tap the Power/Function button Decline a call Incoming call Press the Power/Function button for 2 seconds End a call In a call/outgoing call Tap the Power/Function button
10 Redial the last number Standby/connected Double tap the Power/Function button Mute on or mute off microphone In a call/outgoing call Tap the Volume Up and Volume Down simultaneously Switching handset/earphone voice In a call Press the Volume Up and Volume Down buttons simultaneously for 2 seconds Adjust the volume Tap the Volume Up or Volume Down button Activate Siri (iOS) or Google Voice Search (Android) Standby/Connected Tap the Power/Function and Volume Up buttons simultaneously Listening to Music You can enjoy and control Audio through the in line controller on your BE Live5. Audio option Action Play or pause audio Tap the Power/Function button Skip to next track Press the Volume Up button for 2 seconds Play previous track Press the Volume Down button for 2 seconds Adjust the volume Tap the volume up or volume down button *Please note: when muting the BE Live5 or reactivating it from MUTE there will be a very slight delay Pairing with a Laptop The connection instructions below apply to owners of Windows 7, 8, 8.1 and 10. 1. Power your PC/Laptop 2. Find “Bluetooth Settings” 3. Switch your laptop Bluetooth to “On” 4. Turn the BE Live5 to “Pairing Mode” 5. When the BE Live5 is discovered by your laptop left click on “Pair” 6. Right click on the speaker symbol at the bottom right side of the screen 7. From the dropdown menu right click on the “Playback Device” 8. Please choose and right click the “Optoma NuForce BE Live5 stereo ready” (see image below text) 9. Click on HEADPHONES to set the “Headphones Optoma NuForce BE Live5” as default device
11 10. Press OK Pairing with a Mac The connection instructions below apply to owners of all current and recent iOS versions 1. Power your Mac 2. Open “System Preferences” 3. Click on the Bluetooth symbol
12 4. Turn the Optoma NuForce BE Live5 to “Pairing Mode” 5. When the Optoma NuForce BE Live5 is discovered by your Mac click on “Pair” 6. Your Mac is now ready to play audio via the BE Live5 MISCELLANEOUS Multipoint Connections If you have stored pairing information for multiple devices and more than one of those devices have Bluetooth enabled at the same time, your BE Live5 will enable multipoint connection. Multipoint connection allows your BE Live5 to hold connections with two devices at the same time while playing audio signal from only one of the two devices. Multipoint connection works in the following ways: • Your BE Live5 automatically connects with the most recently paired device (“Primary device”). • You must manually connect the second device (“Secondary device”) to your BE Live5 via its operating system.
13 • The BE Live5 will prioritize the audio from Primary device. • You can control Primary device using the BE Live5 in line controller. • When Primary device is idle, your BE Live5 can receive audio from Secondary device. • Secondary device must be controlled directly from its operating system. • Simultaneous audio from both devices is disabled. Restore Factory Settings When you restore the BE Live5 to its factory settings, the paired devices stored will be deleted. To restore factory settings: 1 Ensure that your BE Live5 are not connected to any device. 2 Put the BE Live5 in pairing mode. 3 Press simultaneously the Power/Function, Volume Up, and Volume Down buttons for 2 seconds until the LED indicator flashes red five times and you hear five short tones from the BE Live5. Because all pairing information is deleted after restoring factory settings, the BE Live5 will directly enter pairing mode once powered on. Voice Prompts list The BE Live5 are pre-loaded with English voice prompts “Power On” “Power Off” “Full Battery” “Battery at 50%” “Battery Low” “Primary device connected” “Secondary device connected” “Pairing Mode Activated” “Voice Dial” Audio option Action Activate voice prompts Press the Power/Function and Volume Up buttons simultaneously for 2 seconds
14 Turn off voice prompt Press the Power/Function and Volume Down buttons simultaneously for 2 seconds Disclaimer Please be advised, the BE Live5 is equipped with the latest technology however functionality may vary by device. Federal Communication Commission Interference Statement 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.Manufacture: Optoma Corporation. 12F.,No.213,Sec.3, Beixin Rd.,Xindian Dist., New Taipei City, Taiwan
15 Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement Max RF power CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS Excessive sound pressure from earphones and headphones can cause hearing loss. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environmentBT BR+EDR(2402-2480MHz): 2.7-4.7dBmRF exposure information: The EIRP power of the device at maximal case is below the exemt condition, RF exposure assessment has been performed to prove that this unit will not generate the harmful EM 20mW specified in EN62479: 2010. emission above the reference level as specified in EC Council Recommendation(1999/519/EC).
16 Regulatory Conformance Notice: This device may be used in each member state in EU NCC 依據低功率電波輻射性電機管理辦法 第十二條 ※經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 第十四條 ※低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。 -前項合法通信，指依電信法規定作業之無線電通信。 -低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 Administrative Regulations on Low Power Radio Waves Radiated Devices warning: Article 12 Without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to a approved low power radio-frequency devices. Article 14 The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications is operated in compliance with the Telecommunications Act. The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated Hereby, Optoma Corporation. declares that the radio equipment type (Bluetooth earphones, APBELIVEU) is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:www.Optoma.com
17 Specification Connection type Bluetooth 2.4Ghz Bluetooth type V4.1 Bluetooth profile HSP 1.2, HFP 1.6, A2DP 1.2, AVRCP 1.4 A2DP Codec SBC, Qualcomm® aptX™ audio, AAC Cable length 580 +/- 20 mm Driver Type Dynamic Driver size 8 mm Impedance 16 Ohm Battery life (estimated) Up to 8 hours Battery type Lithium-ion battery, Cylindrical Type, Typical 3.7V/55mAh x2 pcs Microphone sensitivity -42 +/-3 dB Frequency response 20Hz - 20kHz Sensitivity 99dB +/-3dB at 1KHz power consumption 15mA at A2DP mode Range Up to 10m Weight 16 Grams Qualcomm aptX is a product of Qualcomm Technologies International, Ltd. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries, used with permission. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries, used with permission. Operation temperature 0--45 degrees Celsius

Navigation menu