Orange Electronic P428 TPMS User Manual P428 V4x

Download:
Mirror Download [FCC.gov]
Document ID	2596810
Application ID	/9A5e0JpP2BimGNzDLBtXw==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.8kB (72449 bits)
Date Submitted	2015-04-26 00:00:00
Date Available	2015-04-26 00:00:00
Creation Date	2015-04-23 17:57:44
Producing Software	Acrobat Distiller 11.0 (Windows)
Document Lastmod	2015-04-23 17:57:44
Document Title	Microsoft Word - P428說明書-V4.docx
Document Creator	PScript5.dll Version 5.2.2
Document Author:	User

TPMS
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.
FCC Caution: To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance could void the user's
authority to operate this equipment. (Example - use only shielded interface cables
when connecting to computer or peripheral devices).
FCC Radiation Exposure Statement
This equipment complies with FCC RF radiation exposure limits set forth for an
uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other
antenna or transmitter.
FCC Notice
This system is the use of wireless tire pressure sensors to measure pressure and temperature
inside the tire and transmit the information through radio signal. Under the normal
operation , the wireless tire pressure sensors will receive the normal value to represent the
tire pressure or temperature. When the system detects one or more abnormal tire pressure
or temperature, the wireless tire pressure sensors will send a wireless emergency signal to
the Bluetooth receiver and the receiver and the smart phone will warn the drivers with a
alarm sound and a warning light in orange color immediately. (And the driver could check the
detailed tire information by smart phone) Then, in order to prevent any possible accidents
causes by tire pressure or temperature, the driver shall immediately inspect the tire and get
professional support when needed.
Caution: the system is wireless RF product; therefore, it may not receive a signal due to the
poor environment or incorrect operating or incorrect installation. When the system
continually cannot receive any signal from any tire sensor more than 10 minutes since the
system be switch on power for monitoring, the system will shown “
”(Blank) and turn on
the RED abnormal tire LED light and alert sound. In this case, it may cause by a RF
interference environment, a driver need to drive the vehicle and leave this place. If the
display still cannot receive any correct signal from tire sensor, then, a driver need to find a
nearby qualified tire maintain service for checking and maintain. It may cause by a tire
sensor damages or battery power consumption. (In abnormal condition, the tire sensor will
continually send warning signal for driver, thus it wills consumption the battery quickly than
normal prediction.)
System Installation and Usage
This system is suitable for use on a passenger car, SUV and 4X4 tires. Installation of the TPMS
requires the qualified personnel to compelet the installation process according to
instructions here. And any improper installation or dismantling to the device, the customer
should be pay full responsebilities to it and won’t be able to get the product warranty
Caution:Do not operate the TPMS tire pressure monitoring system while driving. The
product development company and its developers are not responsible for any loss or liability
damages resulting from the improper operation.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : Yes
Author                          : User
Create Date                     : 2015:04:23 17:57:44+08:00
Modify Date                     : 2015:04:23 17:57:44+08:00
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Creator Tool                    : PScript5.dll Version 5.2.2
Format                          : application/pdf
Title                           : Microsoft Word - P428說明書-V4.docx
Creator                         : User
Producer                        : Acrobat Distiller 11.0 (Windows)
Document ID                     : uuid:00cf884c-cf45-4097-9f91-72bfecdcf517
Instance ID                     : uuid:81f59a63-cb92-4f81-b7b1-d3e83c32302b
Page Count                      : 2

EXIF Metadata provided by EXIF.tools