Orderly Electronics FMBT1736A Bluetooth FM Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3955652
Application ID	IgfjWALrTvcpK+lgJhV0Ag==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	143.23kB (1790400 bits)
Date Submitted	2018-08-08 00:00:00
Date Available	2018-08-08 00:00:00
Creation Date	2018-08-01 13:19:00
Producing Software	PDFCreator 2.3.0.103; modified using iTextSharp 5.2.1 (c) 1T3XT BVBA
Document Lastmod	2018-08-01 13:19:01
Document Title	User Manual
Document Creator	PDFCreator 2.3.0.103
Document Author:	kdyuan

@ black
BLLIETIDCITH‘E
FM TRANSMITTER
Model: BWB17AVOO4
PRODUCT GUIDE
FCC Statement
Warning: Changes or modifications to this unit not expressly approved by the party
responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. if this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
0 Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other antenna
or transmitter.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions : (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
FCC RF Radiation Exposure Statement Caution: To maintain compliance with the
FCC’S RF exposure guidelines, place the product at least 20cm from nearby persons.
FCC RF exposure information (SAR)
This device meets the government's requirements for exposure to radio waves. This device is
designed and manufactured not to exceed the emission limits for exposure to radio frequency
(RF) energy set by the Federal Communications Commission of the U.S. Govemment.
The exposure standard for wireless devices employs a unit of measurement known as the
Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are
conducted using standard operating positions accepted by the FCC with the device
transmitting at its highest certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual SAR level of the device while
operating can be well below the maximum value. This is because the device is designed to
operate at multiple power levels so as to use only the poser required to reach the network.
In general, the closer you are to a wireless base station antenna, the lower the power output.
While there may be differences between the SAR levels of various devices and at various
positions, they all meet the government requirement.
Shielded cables must be used with this unit to ensure compliance with the Class B
FCC limits.
1) The Responsible party information: Name, Address, Telephone Number
2) The name and model number of the product
LOCATION OF CONTROLS
LCD Display
CH- Button
CH+ Button
K Button
N Burton
Volume Control/. Knob
AUX (In) Jack
Micro SD Card Slot
Built-in Microphone
Car Cigarette Plug
USB Port (For charging the external USB Device)
newsman wewwe
PP
OPERATION
For listening to music from your BT Device through the unit and your Car Radio,
follow the steps below:
PAIRING:
Step1:
Pairing the unit to your Car Radio:
1. Connect the unit to the car cigarette lighter socket as illustrated below:
2. The unit will automatically power on and the voltage of the car battery will
appear on the LCD Display on the unit as illustrated below:
3. A few seconds later, the following screen will appear:
>3 H1 23 FM107.0
BWBl7AV004
Unconnected
4. Turn on your Car Radio and enterthe radio FM mode as usual. Search fora
blank FM channel without any radio signal received (For example: 107.0 MHZ).
5. Then press the CH- or CH+ Button on the unit repeatedly until the same channel
frequency appear on the LCD display as illustrated below (For example: 107.0
MHz):
107. 0 MHz
FM
Step 2:
Pair your BT (Bluetooth) Device to the unit:
In first time use or repairing the unit to a new ET Device, pairing it as below:
1. Power on and pair the unit to Car Radio as step 1 above.
2. The BT logo * on the LCD Display and the Red Indicator on the Volume Control/
Knob will blink.
3. Power on the external BT Device and enter to BT mode.
4. The unit will start pairing to the BT Device automatically. Alter pairing, the BT
logo * on the LCD Display and the Red Indicator on the Volume Control/.
Knob will stop blinking. The following picture will appear on the LCD Display
(XXXX on the display is the name of paired device).
)B m 23 FM107.0
BWBl7AV004
XXXX
LISTENING TO MUSIC THROUGH PAIRED BT DEVICE:
1. After step 1 & 2, now you can play the music or answer the incoming call with the
paired BT Device as usual,
2. During playback;
0 Turn the Volume Control/. Knob on the unit to adjust volume level as
desire. (Or, use the Volume Controls on the Car Radio or paired BT Device
to adjust volume level).
0 Press the Volume Control /. Knob to pause; press again to resume
normal playback.
0 Press the K or N Buttons repeatedly to skip tracks.
3.
4.
If the unit is paired to a Cell Phone and a call is incoming during an active music
session. Press and release the Volume Control /. Knob then speak to the
built-in microphone to answer the call (Or, press and hold the knob
approximately 1 second to reject the call). When your call is complete, press the
Volume Control/. Knob to disconnect or end the call and resume to music
playback.
To shut off the unit, unplug the unit from car cigarette lighter socket.
Notes:
0 When the external BT Device searches the unit, our model number
”BWBl 7AV004” will appear on the display of external BT Device.
If while pairing you are asked for a code please try "0000" or "1234".
Normal operation after paired:
1. Power on the external BT Device and enter to BT mode.
2. Power on the Car Radio and previously receiving the preset FM frequency same
as the preset of unit (For example: 107.0 MHz).
3. Connect the unit to the car cigarette lighter socket. The LCD Display will
illuminate and the BT logo * and the Red Indicator on the Volume Control/
Knob on it will blink.
4. Wait a few seconds, the unit will automatically pair to the unit. After paired, the
BT logo * and the Red Indicator on the Volume Control/.Knob on the LCD
Display will stop blinking.
5. if pairing is complete you may now play music and answer the incoming call with
your external BT Device.
AUX [IN|:
For listening to music from external Audio Player (such as a MP3 Player,
Discman ...etc.):
1.
2.
Connect one end of the supplied Audio Connection Cable to the AUX Out/Line
Out/Phone Jack on the external Audio Player.
Connect the other end of the cable to the AUX Jack on the right of unit.
3. Play the music on the connected Player as usual. (Make sure the volume level of
the connected Audio Player is turned to high level.)
4. Power on the Car Radio and the unit will pair them together as previously step
1.
5. Play the music on the connected Player as usual. (Make sure the volume level of
the connected Audio Player is turned to high level.)
6. During playback
I Use the Volume Controls on the Car Radio or connected Audio Player to
adjust volume level.
0 Press the Volume Control/. Knob to pause: press again to resume
normal playback
7. To shut offthe unit, unplug the unit from car cigarette lighter socket.
MICRO SD CARD:
1. Insert the Micro SD Card into the Micro SD Card Slot with contact finger face to
the front as the marking on the unit and illustrated follows:
g .
2. Connect the unit to the car cigarette lighter socket to power on the unit. Play
will automatically start.
3. During playback;
0 Turn the Volume Control/. Knob on the unit to adjust volume level as
desire. (Or, use the Volume Controls on the Car Radio or paired BT Device
to adjust volume level).
0 Press the Volume Control/. Knob to pause: press again to resume
normal playback.
O Pressthe K or N Buttonsto skip tracks.
4. To shut off the unit, unplug the unit from car cigarette lighter socket.
Notes:
0 When Micro SD Card is inserted into the unit. BT will automatically shut off.
Unplug the card from the unit before use BT.
0 Up to 32 GB Micro SD Card the unit support to play.
0 Before replacing Micro SD Card, make sure the unit is unplugged from the car
cigarette lighter socket.
I When inserting the Micro SD Card, make sure the direction you selected is
correct. Never insert violently to avoid damaging the Micro SD Card or the unit.
0 If it doesn’t work, please check if the direction ls correct.
0 You also need to download the desired music in MP3 format into the Micro SD
Card before insert into the unit.
AUX (OUT):
If your car radio (or any external Audio Player) equipped AUX IN Jack. Connect the
unit to your car radio (or the external Audio Player) through it and listen music from
the paired BT device (or the external Audio Player) as follow:
1.
Connect one end of the supplied Audio Connection Cable to the AUX IN Jack on
your car radio (or the external Audio Player).
Connect the other end of the cable to the AUX Jack on the right of unit.
Power on the external BT Device and enter to BT mode.
Power on the Car Radio (or the external Audio Player) and set the input source
to AUX IN mode.
Pair the external BT Device to the unit and play the music on it (or play the
music on the Micro SD Card) as previously instructed.
6. During playback:
0 Turn the Volume Control/. Knob on the unit to adjust volume level as
desire. (Or, use the Volume Controls on the Car Radio or paired BT Device
to adjust volume level).
0 Press the Volume Control/. Knob to pause;+ press again to resume
normal playback.
0 Press the K or N Buttons to skip tracks.
7. To shut off the unit, unplug the unit from car cigarette lighter socket.
NOTE:
When the Audio Connection Cable was inserted into the AUX Jack. BT will be cut
off automatically. Unplug the cable from the AUX Jack before use BT.
BUILT-IN USB CHARGER:
The unit has a built—in USB Charger. Use it to charging the external USD Device as
below:
1. Connect the unit to the car cigarette lighter socket to power on the unit.
2. Connect the full size USB Plug of the charging cable from the external USB
Device to the USB Port.
3. Charging will automatically start. Monitoring the charging status by the
Charging Indicators on the external USB Device as usual.
4. When finished charging, disconnect the external USB Device from the USB Port.
Note:
The unit has a built-in overload/overheats protector. If the output of the unit is
overload (or short circuit). The charger will auto shut off. Unplug the external USB
Device from the USB Port. The charge will auto reset.
TROUBLESHOOTING
Check the following before requesting service:
SYMPTOM POSSIBLE CAUSE POSSIBLE SOLUTION
Car Radio no The radio frequency between the Found and set the radio frequency
sound unit and Car Radio mismatch of the Car Radio and unit in the
same frequency
No sound or Volume of the unit was set to minimum Increase the volume by turn
sound weak position the Volume Control/.Knob on
the unit clockwise.
Volume level of paired/
connected device is in low level
Rise the volume level of
the paired/connected device
Sound distortion
Volume level too high
Reduce the volume level by turn the
Volume Control/.Knob on the unit
counterclockwise
Volume level of the connected/paired
device too high
Reduce the volume level of the
connected/paired device
BT not functioning
The external BT Device had NOT paired
to the unit
Pair the external BT device to the
unit as page 4-5
The external BT device too far from the
unit
Place the external BT device close to
the unit
Micro SD Card was inserted into the unit
Unplug the card from the unit before
use DT
Audio Connection Cable was inserted
into the AUX Jack
Unplug the Audio Connection Cable
from the AUX Jack before use BT
Power source:
Output from Built—in USB Charger:
FM Transmitting Frequency:
FM Transmitting Power:
BT Version:
BT Operation Distance:
SPECIFICATI'IONS:
lighter socket
87.5-108
3.0
DC: 12 or 24 V, 1300 mAh (Max.) from car cigarette
DC: 5 V, 2.1 A(Max.)
MHz
87 dBuv/107 dBuv
32 Feet in open area
PACKAGE INCLUDES:
1 x Owner’s Manual
1 x Audio Connection Cables with 3.5mm Plugs
SPECIFICATIONS AND ACCESSORIES ARE SUBJECT TO CHANGE WITHOUT NOTICE

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Modify, Copy, Annotate, Fill forms, Extract, Assemble
Page Count                      : 12
Page Layout                     : SinglePage
Page Mode                       : UseNone
XMP Toolkit                     : XMP toolkit 2.9.1-13, framework 1.6
About                           : uuid:e598833f-97a5-11e8-0000-eca503f8995d
Producer                        : PDFCreator 2.3.0.103; modified using iTextSharp 5.2.1 (c) 1T3XT BVBA
Keywords                        : 
Modify Date                     : 2018:08:01 13:19:01+08:00
Create Date                     : 2018:08:01 13:19:00+08:00
Creator Tool                    : PDFCreator 2.3.0.103
Document ID                     : uuid:e598833f-97a5-11e8-0000-eca503f8995d
Format                          : application/pdf
Title                           : User Manual
Creator                         : kdyuan
Description                     : 
Author                          : kdyuan
Subject                         : 

EXIF Metadata provided by EXIF.tools