Orion Car Audio 2002 Users Manual G47415_20 2 03

3002 to the manual d18fb0ea-8223-45af-90cb-30597ab71b66

2015-02-04

: Orion-Car-Audio Orion-Car-Audio-2002-Users-Manual-374625 orion-car-audio-2002-users-manual-374625 orion-car-audio pdf

Open the PDF directly: View PDF .
Page Count: 18

CONTENTS

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Practice Safe Sound™ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Limited Two-Year Consumer Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Record Your Serial Number and Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

End Panel Layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Amplifier Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Stereo / Mono Input Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Internal Crossover Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Input Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

INTELLi Bass Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Amplifier Wiring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Power Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Speaker Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Amplifier installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Choosing Mounting Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Passenger Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Trunk Compartment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

General Precautions and Installation Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Tools of the Trade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Step By Step Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Set Up and Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Testing the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Adjusting the Sound of the System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Troubleshooting Tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

INTRODUCTION

Thank you for your purchase of Orion's 2002 or 3002 amplifier. Each Orion amplifier is

designed to be the leader in its class offering ease of use, advanced features, and the most

power. Orion amplifiers are designed as the best affordable high end car audio amplifier

money can buy. Listed below are the features of the new Orion 2002 and 3002.

●2002 - 50 Watts per channel, two-channel amplifier with dual built-in high-pass

and low-pass 12dB/octave crossover centered at 100Hz and INTELLi Bass. The 2002

is capable of 3, 2, or 1 channel operation with a maximum power of 200 Watts

into 4Wmono.

●3002 - 75 Watts per channel, two-channel amplifier with dual built-in high-pass

and low-pass 12dB/octave crossover centered at 100Hz and INTELLi Bass. The 3002

is capable of 3, 2, or 1 channel operation with a maximum power of 300 Watts

into 4Wmono.

The installation of all Orion amplifiers will determine the overall performance result.

Improper installation will not only limit the performance of your Orion system but also

potentially compromise the reliability of the amplifier. To ensure proper sonic results and

component reliability, please refer to your Authorized Orion dealer for installation assis-

tance or advice. If you decide to perform the installation yourself, read the entire manual

before beginning the installation.

What’s in the Box

●(1) Amplifier

●(1) Extra Fuse

●(1) High Level Input Harness

●(1) Allen Wrench 2.5mm

●(1) Allen Wrench 3mm

●(4) #8 self-tapping black Phillips head pan head screws

●(1) Amplifier installation and operation manual

PRACTICE SAFE SOUND™

Continuous exposure to sound pressure levels over 100dB may cause permanent hearing

loss. High power automotive sound systems can generate sound pressure levels in excess of

130dB. When playing your system at high levels, please use hearing protection and avoid

long term exposure.

LIMITED TWO-YEAR CONSUMER WARRANTY

Directed Electronics, Inc. promises to the original purchaser, to replace this product should

it prove to be defective in workmanship or material under normal use, for a period of two

years from the date of purchase by the dealer as indicated by the date code marking of the

product PROVIDED the product was installed by an authorized Directed dealer. During this

two year period, there will be no charge for this replacement PROVIDED the unit is

returned to Directed, shipping pre-paid. If the unit was installed by anyone other than an

authorized Directed dealer, the warranty period will be 1 year from date of purchase by the

dealer as indicated by the date code marking of the product. During this 1 year period,

there will be no charge for this replacement PROVIDED the unit is returned to Directed,

shipping pre-paid. This warranty is non-transferable and does not apply to any unit that has

been modified or used in a manner contrary to its intended purpose, and does not cover

damage to the unit caused by installation or removal of the unit. This warranty is void if the

product has been damaged by accident or unreasonable use, neglect, improper service or

other causes not arising out of defects in materials or construction. ALL WARRANTIES

INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WAR-

RANTY OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY

OF NON-INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO

THE MAXIMUM EXTENT ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR

AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH

THE SALE OF THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND

ALL ACTS OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS.

Unit must be returned to Directed, postage pre-paid, with: consumer's name, telephone

number, and address, authorized dealer's name and address, and product description. IN

ORDER FOR THIS WARRANTY TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH

PROOF OF INSTALLATION BY AN AUTHORIZED DIRECTED DEALER. ALL UNITS

RECEIVED BY DIRECTED FOR WARRANTY REPAIR WITHOUT PROOF OF DIRECTED

DEALER INSTALLATION WILL BE COVERED BY THE LIMITED 1 YEAR PARTS AND

LABOR WARRANTY. BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND

CONSENTS THAT ALL DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE

RESOLVED IN ACCORDANCE WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALI-

FORNIA.

NOTE: This warranty does not cover labor costs for the removal and reinstallation of the

unit.

Record Your Serial Number and Date

Model: __________________________________________________

Serial Number: __________________________________________________

Date of Purchase: __________________________________________________

Purchased from: __________________________________________________

SPECIFICATIONS

1. All channels driven, continuous 4Wload 20Hz to 20kHz, < 0.05% THD, with input voltage

at 13.8VDC.

2. All channels driven, continuous 2Wload 20Hz to 20kHz, < 0.1% THD, with input voltage at

13.8VDC.

Amplifier Section Orion 2002 Orion 3002

Power Output 4WStereo (Watts)1 50 x 2 75 x 2

Power Output 2WStereo (Watts)2 100 x 2 150 x 2

Power Output 4WMono (Watts)1 200 x 1 300 x 1

Distortion - all channels < 0.1% THD+N < 0.1% THD+N

driven at rated power

(20Hz to 20kHz)

Frequency Response 20Hz to 20kHZ 20Hz to 20kHZ

±0.25dB ±0.25dB

Linear Bandwidth 10Hz to 50kHz ±3dB 10Hz to 50kHz ±3dB

Signal-to-Noise Ratio > 100dB > 100dB

at Rated Power

Damping factor > 200 > 200

Slew Rate > 20V per usec > 20V per usec

RCA Input Sensitivity 200mV to 5V 200mV to 5V

High Level Input Sensitivity 1V to 10V 1V to 10V

Input Impedance 10kW10kW

Fuse Type 1 x 25 Amp ATC 1 x 30 Amp ATC

Dimensions 12.4" x 10.5" x 2.3" 15.2" x 10.5" x 2.3"

Weight 7 lbs. 9 lbs.

Crossover Section

Low Pass Crossover 2nd Order 2nd Order

(12dB per octave) (12dB per octave)

Low Pass Frequency 100Hz 100Hz

High Pass Filter 2nd Order 2nd Order

(12dB per octave) (12dB per octave)

High Pass Frequency 100Hz 100Hz

INTELLi Bass 10dB boost 10dB boost

INTELLi Bass Center Frequency 45Hz 45Hz

END PANEL LAYOUT

1. Power LED - when lit indicates that the amplifier is on.

2. Stereo/Mono Switch - configures the amplifier for one or two inputs.

3. RCA Inputs - accepts RCA input from a source unit, preamplifier, or equalizer.

4. Gain Control - continuously adjusts from 200mV to 5V for full power output.

5. High-Level Input Connector - accepts input from head unit's speaker output.

6. Crossover Switch - configures the front channel for high-pass, low-pass, or full

range operation.

7. INTELLi Bass Control - continuously adjusts from 0 to 10dB of boost centered at

45Hz.

8. Speaker Connections - accepts up to 12-gauge speaker wire.

9. 1 ATC Fuse - protects the amplifier from over current situations.

10. REM Remote Turn-on Input - turns on the amplifier when fed 12 V+.

11. Power Connections - accepts greater than 8 AWG power and ground cables.

AMPLIFIER SETTINGS

Stereo / Mono Input Configuration

The STEREO / MONO switch allows the Orion 2002 and 3002 amplifiers to use a single RCA

or high-level input to feed signal to both the right and left channels of the amplifier.

When the switch is to the right (MONO position), signal from the left input is routed to the

right channel. This is the preferred mode when bridging the amplifier into a single speak-

er. When the switch is to the left (STEREO position), right and left inputs are independent.

This allows a source unit with an internal balance to change the stereo imaging.

Internal Crossover Configuration

The Orion 2002 and 3002 amplifiers use a multi-position switch to determine the crossover

configuration. The multi-position switch is located on the adjustment side of the amplifier.

Listed below are the switch positions and their respective crossover configurations.

When the switch is to the left (FULL position), the crossover section of the amplifier is

bypassed. Amplifier output is full range. When the switch is in the center (HIGH position),

the crossover is configured for high-pass operation. The crossover is fixed at 100Hz at 12dB

per octave. When the switch is to the right (LOW position), the crossover is configured for

low-pass operation. The crossover is fixed at 100Hz at 12dB per octave.

Input Gain

The Orion 2002 and 3002 amplifiers have gain adjustments with an input sensitivity range

from 200mV up to 5V on the RCA inputs and 1V to 10 on the high-level inputs. This allows

easy integration from any source unit either with RCA outputs or speaker outputs. Refer to

the Testing the System and the Adjusting the Sound of the System sections for detailed

instructions on setting up the level controls.

INTELLi Bass Control

INTELLi Bass maximizes the performance of a subwoofer. INTELLi Bass allows for continuous

adjustment of low frequency boost. INTELLi Bass is a variable Q and variable frequency low

frequency boost. INTELLi Bass can be adjusted from 0dB of boost to 10dB of boost centered

at 45Hz. Initially the Q is very low. As INTELLi Bass is added, the Q becomes sharper. This

allows the Orion 2002 and 3002 to overcome acoustic deficiencies in your vehicle. The type

of enclosure used, the sub-woofer's excursion capability, personal preference, and attitude

determine acceptable boost levels.

WARNING! Exercise caution when setting INTELLi Bass. Maximum boost can potentially

cause woofer damage due to overexcursion.

AMPLIFIER WIRING

Power Connections

●Orion 2002 Fuse Size: (1) 25 AMP

●Orion 3002 Fuse Size: (1) 30 AMP

●Minimum 8 AWG power and ground cable is recommended for acceptable per-

formance.

●Fuse power wire prior to wire passing through panels or near sharp edges and less

than 18" from battery.

●Ground amplifier to a good chassis ground as close as possible to the amplifier.

●Add extra ground wire (minimum 8 AWG) between the negative terminal of the

battery and the chassis.

NOTE: The addition of a ground wire from the battery to the chassis of the vehicle

improves the ability of the battery to supply power to the amplifier. This is recom-

mended because the current delivery of the factory electrical system was designed

only to accommodate electronics supplied by the auto manufacturer.

Speaker Connections

Two Channel Stereo Configuration

●Lowest recommended impedance is 2Wstereo.

●Stereo input should be used for this configuration.

●Outputs can be configured for high-pass, low-pass, or full range operation.

Summed Bridged Configuration

●Lowest recommended impedance is 4Wbridged mono.

●Mono or stereo input can be used for this configuration.

●Outputs can be configured for high-pass, low-pass, or full range operation.

●Output is configured as summed bridged which is ideal for subwoofer applications.

Single Channel Bridged Configuration

●Lowest recommended impedance is 4Wmono.

●Mono input must be used for this configuration. Only the Left input is used.

●Outputs can be configured for high-pass, low-pass, or full range operation.

●Outputs are configured for single channel bridged operation which is ideal for

separate left or right channel subwoofer applications.

Tri-Mode Three Channel Configuration

●Lowest recommended impedance is 2Wstereo and 4Wbridged mono.

●Stereo operation must be used.

●Outputs must be configured for full range operation

●Output is configured stereo and summed bridged.

●Passive crossover frequencies must not overlap.

WARNING! Failure to observe these requirements may result in damage to the amplifier.

AMPLIFIER INSTALLATION

Choosing Mounting Locations

The location of your amplifier will depend on several important issues. Due to the low pro-

file size of the Orion amplifiers, there are many possible installation locations that will yield

satisfactory amplifier performance. Always mount the amplifier in a place that protects the

amplifier from the elements. In addition, mount the amplifier on a stable, flat surface.

NOTE: Mounting amplifiers upside down is not recommended and may cause premature

thermal shutdown.

WARNING! Do not mount any amplifier in the engine compartment. Amplifiers are not

designed to endure the harsh environment of the exterior elements.

Passenger Compartment

If you are going to mount the amplifier in the passenger compartment, make sure you have

adequate room for ventilation. The amplifiers have been designed to make under-seat

mounting possible. When mounting your amplifier under a seat or similar area, keep a min-

imum of 1" of clearance around the amplifier for adequate cooling.

Trunk Compartment

Mounting your amplifier in the trunk provides excellent performance as long as you do not

restrict the airflow around the heatsink of the amplifier. For optimal results, mount the

amplifier with as much clearance as possible. This type of mounting will yield the best cool-

ing due to the convection effect of the amplifier chassis.

General Precautions and Installation Tips

WARNING! Be careful not to cut or drill into gas tanks, fuel lines, brake lines, hydraulic

lines, vacuum lines, or electrical wiring when working on your vehicle.

Disconnect the vehicle's ground wire at the battery before making or breaking connections

to the audio system's power supply terminals.

Do not use this amplifier unmounted. Failing to securely mount the amplifier can result in

damage or injury, particularly in the event of an accident. An unmounted amplifier becomes

a dangerous projectile in the event of a crash. Never mount the amplifier where it might

get wet. Mount the amplifier so the wire connections will not be pulled. Route the wires

where they will not be scraped, pinched or damaged in any fashion.

The +12V power supply wire must be fused as close as possible to the battery terminal, ide-

ally within 18". Use the recommended fuse size or circuit breaker listed in the Power

Connections section of this manual.

If you need to replace the fuse plugged into the side of the amplifier, replace the fuse with

the same size ATC / MAXI type fuse that came with the amplifier. If you are not sure as to the

correct value, refer to the Power Connections section of this manual for details. Using a high-

er current fuse may result in damage to the amplifier that is not covered under warranty.

NOTE: Make sure all the equipment in the system is turned off when making or break-

ing connections to the input RCA's or speaker terminals. Turn on the system and

slowly turn up the volume control only after double checking all wire connections.

Power for systems with a single amplifier can be supplied by most automotive electrical sys-

tems. Systems with multiple amplifiers may require a higher capacity battery, alternator or

the use of a storage capacitor. We strongly recommend the use of a Directed Audio

Essentials power capacitor with an extra battery in larger stereo systems.

Orion amplifiers generate a certain amount of heat as part of normal operation. Be sure the

area around the amplifier is unobstructed to allow adequate air circulation. Remember,

beach blankets, last week's laundry, school books and homework papers located on top of

the amplifier do not improve air flow and may become damaged.

Tools of the Trade

Listed below are the majority of the tools required to perform an installation. Having the

proper tools will make the installation that much easier. Some of these tools are necessities.

Some just make the job easier.

●Allen Wrenches (2.5mm and 3mm)

●DMM or VOM

●Electric drill with assorted drill bits

●Grommets

●Heat shrink tubing

●Marking pen

●Nylon tie straps

●Phillips and flat blade screw drivers

●Pliers (standard and needle nose)

●Reference CD with 1 kHz Sine Wave at 0dB level (all bits high)

●RTA (real time analyzer)

●Soldering iron and solder

●Utility knife

●Wire brush or sandpaper for chassis grounding

●Wire crimper

●Wire cutters

●Wire strippers

Step By Step Installation

Step 1 Determine the location for the amplifier. Refer to the Choosing Mounting

Locations section of this guide for detailed information.

Step 2 Decide on the system configuration for your amplifier. For system sugges-

tions, refer to the Speaker Connections section of this guide.

Step 3 Run all the wires from the amplifier location to the speakers, source unit, and

battery. Do not connect the battery at this time. Be sure to run RCAs and

power and speaker wires away from factory electrical wires and system as

they pose a great potential for induced system noise.

Step 4 Pre-drill amplifier mounting holes. Be sure to "think before you drill". Gas

tanks, fuel lines, and other obstructions have a nasty way of hiding them-

selves. For best results use a marking pen to mark the mounting holes and

pre-drill these holes with a standard 1/8" drill bit.

Step 5 Mount the amplifier. Make sure the amplifier is mounted on a flat surface. If

this is not possible, do not over tighten the screws so that the chassis of the

amplifier is twisted or bent.

Step 6 Turn the vehicle's key switch to the off position.

Step 7 Disconnect the vehicle's battery ground terminal.

Step 8 Connect the RCA and speaker wires to the amplifier. Check the quality of

your speakers and signal connections. This will determine the ultimate per-

formance of your Orion amplifier. Refer to the Signal Input and Output Level

Controls and Speaker Connections sections of this manual for correct wiring

instructions.

Step 9 Connect power wires to the amplifier. At this time do not connect the fuse at

the main battery.

Step 10 Reconnect the ground terminal to the battery.

Step 11 Set crossovers. Refer to the Internal Crossover Configuration section of this

manual for detailed instructions.

Step 12 Once satisfied that all connections and settings are correct, install the fuse

located near the vehicle's battery and proceed to the Testing the System sec-

tion of this manual.

WARNING! Never exceed the recommended fuse size of this amplifier. Failure to do so

will result in voiding of your warranty and possible damage to the amplifier.

SET UP AND TROUBLESHOOTING

Testing the System

After you have completed the installation, you need to test the system. This will help ensure

years of trouble-free operation. Please refer to the listed steps below when testing the

sound of your Orion system.

Step 1 Check all the wiring connections to be sure they are correct and secure.

Step 2 Turn the signal source volume control all the way down. Set any tone con-

trols to their flat or defeated positions. This includes the loudness control.

Step 3 Turn the level controls of the amplifier to their minimum positions.

Step 4 Turn the source unit on. Check to see if the power LED located on the con-

nection side of the amplifier is on. If not, please refer to the Power

Connections and the Troubleshooting Tips sections of this manual for instruc-

tions.

Step 5 If using an aftermarket source unit, turn the level controls of the amplifier

about one quarter of a turn. Slowly increase the volume level of the source

unit to so that you can hear the output of the system. If no sound is heard or

if the output is distorted, turn the system off immediately. Refer to the Power

Connections and the Troubleshooting Tips sections of this manual to solve

your installation problems.

Step 6 Check to make sure the output for each channel is correct. If the active

crossovers are used, check to make sure that each output is correct from the

amplifier. When using active crossovers on midrange and tweeters, do not

use crossover frequencies lower than recommended. If the system is not con-

figured properly, refer to the Internal Crossover Configuration section of this

manual and take corrective action.

Step 7 If the output is clear and undistorted, continue to the Adjusting the Sound

of the System section of this manual.

Adjusting the Sound of the System

Once you have checked the system's operation, adjust the sound of the system. Adjusting

the sound of the system is accomplished by setting the level controls and adjusting the

internal crossovers.

Step 1 Turn the signal source volume control all the way down. Set any tone con-

trols to their flat or defeated positions. This includes the loudness control.

Step 2 Turn the level controls of the amplifier to their minimum positions.

Step 3 Choose music with high dynamic content that you like, with which you are

familiar, and will be used most often in the system.

Step 4 Turn the source unit's volume control up to its highest undistorted output

level. If you lack test equipment, this point occurs between 3/4 to full volume

depending on the quality of your source unit. Listen for any audible distor-

tion. If any distortion is audible, reduce the volume of the source unit until

you have an undistorted output. Leave the volume control at this position

during your system tuning.

Step 5 While listening to your chosen dynamic music, turn up the level control cor-

responding to the midrange output until you hear slight distortion and turn

the level control back slightly for an undistorted output. Depending on your

system, the midrange and tweeter output may be on the same output chan-

nels.

Step 6 Turn up the level control corresponding to the tweeter output until you hear

slight distortion and turn back the level control slightly for an undistorted

output. Depending on your system the midrange and tweeter output may be

on the same output channels.

Step 7 Fine-tune the output level between midrange and tweeters. Refer to the

Internal Crossover Configuration section of this manual for detailed instruc-

tions.

Step 8 Repeat Steps 5-7 for the rear speakers. If you do not have rear speakers con-

tinue to Step 10.

Step 9 Set levels between the front and rear midrange and tweeters for optimum

front/rear balance.

Step 10 Turn up the level control corresponding to the woofer output until you hear

slight distortion and turn back the level control slightly for an undistorted

output.

Step 11 Fine-tune the output level between satellite speakers and the woofers. Refer

to the Internal Crossover Configuration section of this manual for detailed

instructions. If using an RGC-1, adjust the level to the output of the woofer

to match the sonic requirements of the system.

Step 12 Enjoy your awesome Orion sound system.

Troubleshooting Tips

Symptom Probable Cause Action To Take

No output

Low or no remote turn-on Check remote turn-on voltage

at voltage amplifier and repair

as needed.

Fuse blown Check power wire's integrity

and check for speaker shorts. Fix

as needed and replace fuse.

Power wires not connected Check power wire and ground

connections and repair or

replace as needed.

Audio input not connected Check RCA connections and

repair or replace as needed.

Speaker wires not Check speaker wires and repair

connected or replace as needed.

Speakers are blown Check system with known work

ing speaker and repair or

replace speakers as needed.

Audio cycles

on and off

Thermal protection engages Make sure there is proper venti

when amplifier heatsink lation for amplifier and improve

temperature exceeds 90°C ventilation as needed.

(190°F)

Loose or poor audio input Check RCA connections and

repair or replace as needed.

Loose power connections Check power wire and ground

connections and repair or

replace as needed.

Distorted output

Amplifier level sensitivity Readjust gain. Refer to the

set too high exceeding Adjusting the Sound of the

maximum capability of System section of this manual

amplifier for detailed instructions.

Impedance load to amplifier Check speaker impedance load,

too low if below 4Wmono or 2Wstereo,

rewire speakers to achieve

higher impedance.

Shorted speaker wires Check speaker wire connections

and fix or replace as needed.

Speaker not connected Check speaker wiring and repair

to amplifier properly or replace as needed. Refer to

the Speaker Connections section

of this guide for detailed

instructions.

Symptom Probable Cause Action To Take

Distorted output

Internal crossover not set Readjust crossovers. Refer to the

properly for speakers Internal Crossover Configuration

section of this guide for detailed

instructions.

Speakers are blown Check system with known work

ing speakers and fix or replace

as needed.

Poor bass response

Speakers wired with wrong Check speaker polarity and fix

polarity causing cancellation as needed.

at low frequencies

Crossover set incorrectly Reset crossovers. Refer to the

Internal Crossover Configuration

section of this guide for detailed

instructions.

Impedance load at amplifier Check speaker impedance load,

is too low if below 4Wmono or 2Wstereo,

rewire speakers to achieve

higher impedance.

Battery fuse

blowing

Short in power wire or Check power and ground con

incorrect wiring nections and replace or repair as

needed.

Fuse used is smaller than Replace with proper fuse size.

recommended

Actual current exceeds fuse Check speaker impedance load.

rating If below 4Wmono or 2Wstereo,

rewire speakers to achieve

higher impedance.

Amplifier fuse

blowing

Fuse used is smaller than Replace with proper fuse size.

recommended

Impedance load at Check speaker impedance load.

amplifier too low If below 4Wmono or 2Wstereo,

rewire speakers to achieve

higher impedance.

Speaker is blown with Check system with known work

shorted outputs ing speakers and fix or replace

as needed.

Actual current exceeds Check speaker impedance load.

fuse rating If below 4Wmono or 2Wstereo,

rewire speakers to achieve

higher impedance.

NOTES

____________________________________________________

Warranty

LIMITED TWO YEAR CONSUMER WARRANTY:

Directed Electronics, Inc. promises to the original purchaser, to replace this product should it prove

to be defective in workmanship or material under normal use, for a period of two years from the

date of purchase by the dealer as indicated by the date code marking of the product PROVIDED

the product was installed by an authorized Directed dealer. During this two year period, there will

be no charge for this replacement PROVIDED the unit is returned to Directed, shipping pre-paid.

If the unit is installed by anyone other than an authorized Directed dealer, the warranty period will

be 1 year from date of purchase by the dealer as indicated by the date code marking of the

product. During this 1 year period, there will be no charge for this replacement PROVIDED the

unit is returned to Directed, shipping pre-paid. This warranty is non-transferable and does not

apply to any unit that has been modified or used in a manner contrary to its intended purpose,

and does not cover damage to the unit caused by installation or removal of the unit. This warranty

is void if the product has been damaged by accident or unreasonable use, neglect, improper service

or other causes not arising out of defects in materials or construction. ALL WARRANTIES

INCLUDING BUT NOT LIMITED TO EXPRESS WARRANTY, IMPLIED WARRANTY, WARRANTY

OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND WARRANTY OF NON-

INFRINGEMENT OF INTELLECTUAL PROPERTY ARE EXPRESSLY EXCLUDED TO THE

MAXIMUM EXTENT ALLOWED BY LAW, AND DIRECTED NEITHER ASSUMES NOR

AUTHORIZES ANY PERSON TO ASSUME FOR IT ANY LIABILITY IN CONNECTION WITH THE

SALE OF THE PRODUCT. DIRECTED HAS ABSOLUTELY NO LIABILITY FOR ANY AND ALL ACTS

OF THIRD PARTIES INCLUDING ITS AUTHORIZED DEALERS OR INSTALLERS. Unit must be

returned to Directed, postage pre-paid, with: consumer's name, telephone number, and address,

authorized dealer's name and address, and product description. IN ORDER FOR THIS WARRANTY

TO BE VALID, YOUR UNIT MUST BE SHIPPED WITH PROOF OF INSTALLATION BY AN

AUTHORIZED DIRECTED DEALER. ALL UNITS RECEIVED BY DIRECTED FOR WARRANTY

REPAIR WITHOUT PROOF OF DIRECTED DEALER INSTALLATION WILL BE COVERED BY THE

LIMITED 1 YEAR PARTS AND LABOR WARRANTY. Note: This warranty does not cover labor costs

for the removal and reinstallation of the unit.

BY PURCHASING THIS PRODUCT, THE CONSUMER AGREES AND CONSENTS THAT ALL

DISPUTES BETWEEN THE CONSUMER AND DIRECTED SHALL BE RESOLVED IN ACCORDANCE

WITH CALIFORNIA LAWS IN SAN DIEGO COUNTY, CALIFORNIA.

Orion Car Audio 2002 Users Manual G47415_20 2 03

3002 to the manual d18fb0ea-8223-45af-90cb-30597ab71b66

Navigation menu

Versions of this User Manual:

Views

Navigation