Orion Electric Co 7H730 17-inch Color Monitor User Manual

Download:
Mirror Download [FCC.gov]
Document ID	48914
Application ID	cV2hHNJa3Pp1KuadBGweww==
Document Description	Users Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	98.9kB (1236248 bits)
Date Submitted	1999-07-19 00:00:00
Date Available	1999-09-07 00:00:00
Creation Date	1999-07-19 11:54:09
Producing Software	Acrobat 3.0 Scan Plug-in
Document Lastmod	1999-07-19 11:55:25
Document Title	Users Manual
Document Creator	Acrobat 3.0 Scan Plug-in

SAFETY INSTRUCTTON
CAUTIONS
FCC RF INTERFERENCE STATEMENT
BASIC CONCEPT OF ANUSTMENT
CONTROLS AND FUNCflONS
FRONT CONTROLS
REAR VIEW
D-SUB CONNECTOR PIN ASSIGNMENTS
MAKING THE RIGHT CONNECTIONS
SPECIFICATIONS
HOW TO INSTALL OR REMOVE A TILT/SWIVEL STAND
TROUBLE SHOOTING GUIDE
WICH77GE HINWEISE{GERMANI
This Monitor was
Certilled Factory
Manulaclured by ISO 9001
WSW MANUAL
1. Read all 01 these instructions.
2c Save these instmctions tor later use.
3 Follow al warnings and instructions marked on the product
4. Unplug this product lrorn the wall outlet belore cleaning.
Do not use liquid cleaners or aerosol cleaners, Use a darrp cloth tor cleaning
5. Do not use this product nearwalerr
so Do not place this producton an unstable cart, stand or table.
The product may tel, causing wlous damage lothe product,
7. Slots and openings in the cabinet and the hack orbottom are provided lor
venliation: to ensure reliable operand" ol the product and to protect itlrorn
overheating these openings must not be blocked by placing the product on a bed.
sola, rug or other s’enilarsurlace. This product should neverbe placed near or over
a heal register.
This product should not be placed in a bru'll-in instelalion unless proper ventilation
is provided.
a. This Mot should be operated lrornthe type at power source indicated on the
marking label It you are not owe ol lhe type ot power available consult your dealer
or local power company,
9. This product is equipped with a a wire youndirrg type plug Inving a lhlrdigroundnrg)
pin. This is a selelyteaturer ll you are unable to breed the plug into the outlet,
contact your electrician to replace your obsolete orrtlet. Do not deleat the purpose ol
the grounding-type plug-
10.Donotellowenythingtoreslorrlhepdweroord.
Do not locate this product where persons will walk on the cord.
11.llanextensloncordisusedwllhthisprodumnnakesurelhetlhetctalollhe
anpere ran‘ngs on the products plugged into the extension cord do not exceed the
extension cord ampere rating Also, nrake sure that the total at all products
plugged Into the wall outlet does not exceed 15 anuaeres.
lz. Neverpush objects at any kind Into thls product through cebinet slots as they may
touch dangerous voltage points or short out parts that could result in a risk at lire
orelectric shock Never spill any kind of liquid on the product
13. Do notallenwt to service lhis predict yoursetl, as opening or removing covers
my expose you to dangerous voltage points or other risks
Pieter all servicing to service personnel.
14. Unplug this product trorn the wall outlet and reler servicing to qualified service
personnel under the totldwlng conditions,
A. When the power curd or plug Is damaged or frayed.
B. if liquid has been spiled into the product.
C. It the product has been exposed to rein orweter.
D. It the Product does not operate normally when the operating Instructions are
tollcmed. Adjust only those controls that are covered by the operaflng
instructlons since lrruoper adustment ol other controls may result In damge
and will otten require extensive work bye quelhied technldan to restore normal
operation.
E. "the product has been dropped or the cabinet has been damaged.
F. "the product exhhlts a detinct change In periormanoe. irdcetlng a need tor
service.
b PCMUTIlOW
mepawersupplycordiswedasmemaindiwonnectdevice, ensure theme
sockeiorfllet is locatedfinsixlied near the equipment and Is eesih accessible,
b PA‘ITEIlmOIll
Le cordon d‘atimenteh‘on est utilise comma warmed/general. La prise de
cot/ram flair Eire situee oil Installers a pmxlmlté du malén'ei e! élre facile
- WSTRWIONM‘MML
P NEVER REMOVE THE BACK COVE)!
Removal ot the mar cover should be carried out only by qualified personnel.
This may monitor contains high votmige inside
b DO NOT USE IN HOSTILE ENVIRONMENTS
To prevent shook ortire hazard, Do not expose the unit to rain or moisture.
This unit Is designed to be used In the otfice or home. Do not subject the unit to
vibrations, dust of conceive gases.
b KEEP IN A WELL VEN11LATED PLACE
Ventilation holes are provided on the cabinet to prevent the tentperamre from
rising.
Do not cover the unit orplace anything on the top 01 unit. ventilation holes are
provided also on the bottom 01 the cabinet,
} AVOID HEAT
Avoid pteclng the unit in Greet sunshine or near e heattrg appthnoe,
V BE CAREFUL OF MAGNE‘HC FIELDS
Do not place a magtet, speaker system. ttoppy disc drive oranything which wit
generate magnetismneerthe unit Aniegnetictteld maycause blurredcotorsor
detortion ot the displayed paflem,
) T0 ELIMINATE EVE FATIGUE
Do not use the unit against a bright back ground and where sunlight or other light
sources will shine Greatly on the monhor.
b BE CAREFUL OF HEAVY weer
Neitherthe monitor heel! norerryother heavy obiectshould reston the power cord.
Damage to a power cord can cause fire orelectrlcel shock
”DONE:
flu’sequlpmenthasbeentestedandfoundtawnlptywimthellrnits/ora
ClassBdlgr'taldevice, pursuantluPart 15 almeFGcRulee These t‘mits are
designedtopmvidereasorreblepmtecfionegainsthanmullmederenulne
restdenh'altnsfllrafion.
This equbmentgenerates, usesandcanratflatemlrequencyeneryyand,
ilnotlnstalledandtwedinaowrdanmwflhmemslmwans "rename
narmmlbflerferenoetaredloeormnunicationsHov/ever, mereisnoguarentee
matineflerencewrttnotomirrepanbularinsmam
Ilmlseqm'pmentdoes wuseharrnfulinterferencetamtfloortelew‘stbn
recepabnwnurcanbedetemmwbymmrngmeequipmemoflendowheuser
isenaouragedtatrytowneametrrtefleremebyoneormoreolthefoflwlng
measures
-Reorrenlorreloeatemerecetvingantenna,
-lncreasemeseparatlonbelweenmeeqmbmemandreoeiver.
-Cannectmeequtpmenlinloanautlelorraclrwl‘tdifleremlmmlllallowmm
therewiverlsmnneded,
- Consultltre deeleroran expen'encedram‘o, TVlecImicr‘an forhelp,
- Onlyshl'eldedlnterfaoe cable swabs used
Fmaltxanymangesormodificaflonstomeqummbymewernol
amnestyepprovedbythegrameewmanulectwerwuldvoldmeusers
arrthorrtytoaperatesucheqmpmerrt.
P DOC COMPLIANCE ND110E
Thls ml appemnts does not exceed the Class B Iimilstor radio noise emlsslons
1mm dig'ml apparatus set out in the radio hterterenee regulation ofCenedian
Department of Cormnunimtions
D AVIS DE CONFOHNMKM AU MDCIDOCI
Le présenl appareil nnmérlque n’emet pasde bruils radioelectriques depassanl Ies
Iirnrtes appliqués eux awarels numeriques de Class B d‘aprés les reglemems sur
le brouilage radioetectrique comment par le ministers des mmunioellons or
Canada.
++
1. RECOMMENDED SIGNAL “MING CHART
A P
mzmrm VERNL‘AL
vnso vnso
nomermt vmcat
svnc, 5m
D—SUB INPUT SIGNAL
. . , . . 54.997
mm mm WWIE] 165
0.054 0.054 0.0“ MOS 0.0“ 0.056 0124 0.0“
LOW LOG 0.57! 0.037 0.448 0.503 W D52‘
12,711 15253 “993 Iiw new I1.|79 ISM ILIW
2am 35m sewn 40,0Il—)[4fi.500 56.50 esooo 50.5
nononoueuonunoJuo
Also It has re user setting modes which you can store except for factory setting mode.
Displaying user mode except tor Iactury setting modesfiou can see "NOT PRESE'I’
when you select the momory recall), pteese aqustthe monltor screen for yoursett.
Marthamescreendatalssturedtomemenmywlminnicroproeessor,
2. THE WAY OF ADJUSTMENT
When you want to adjust the screen, please reter to Iunction of controls.
Those screen data are amomatlcally stored to me memory with in micro processor.
mmmnmt u
® MENU BUTTON — at POWER SWITCH
Ct SflECT BUTTON ' POWER INDICATOR
o ADJUST BUTTONS
(DOWN u. up)
FRONT CONTROLS
A. POWER oworrw)
TumslhepowerONorOFF.1'herewlllbe25emndsdeleybetore
the display appears,
The owner LEDtnext lo the pew/er switch) lights when the power is turned ON,
The power 5 turned oil by pressing the power switoh egaln and the power LED
goes out.
B. MENU
Activates and exits the On Semen Disptay.
There are two OSD menu screens.
Theyare USER CONTFloliBtlgMness, Contrast, H-Poeition. H-Slze, V—Positlon,
V-size, Plnwshien, Trapezoid, Pemllelogmm, Plneelanoe, Rotauon, Moire,
Color-temp.. Degauss, Recall, Language)
USER COM'I'HWactt/etes when you press the Menu button)
0. SELECT
The select button allows userto activate the desired Bqtls’tmefll with changing
Icon-color.
n. ADJUST( v A)
The Aqust button allows use: to ohm the loons(oonlrols)in the menu
Pressmg the squat button “v" Df'A' wll step througt a! weleble adjuetrnem
lcons(oontrots).
In addition this adjust button an be used to adjust the ioonstoontrelsl that is
selected and aetivated via the select button.
Pres the Adjust button.
Alter completing all lhe desired adjustmenle the On Screen Dfiplay will disappear
with pressing the menu button. '
1. SELF-TEST DISPLAY
When there k no signal hpmtuo connection), the On Screen Display will show,
2. AUTO REGISTRATION
This monitor has to preset rmdes. II the amentvioeo is one of the preset
"was, the monitor will automatimlty store arty custom deploy settitgs into the
pemtanent memory,
There are also ts user modes that allow you to save the custom display senings
madetoartyvideomodetltatisnototteotthepresetvtdeontooes.
Mistments are etnomatimly registered without pressing any buttons
Up h) 13 user modes are stored atnomatlcalty on a ‘firstln-Ftrst-Out' basis.
3. OSD MENU DEsCRIP‘nON
1C} BRIGHTNESS
Increase or decrease the Intensity(illumlnelion) otthe image.
0 CONTRAST
Increase or deoreases the strengthaightness ordimness) ot the image
D H. POSmONGlorlzontnl position)
Moves images horixonlalty on-soreen lehtv) or rigtt( A).
E N. stzetHortzomt Sin)
InoreasetA) or decrease”) Size of image ttorimrthlly.
El v. Posmotttvuttcat position)
Moves images vertically onsaeen up“) or down”).
II! V. leENertIcel Size)
Increase“) or decreasetV) Size 01 image Venioetty.
IE PINCUSHION
Adjust the side Pin-cushion or bartering,
El TRAPEZOID
Adjust the dealey sloesto be parallel.
. WSTRUCTDNIIAMIAL
IE!
PARALLELOGRAM
Adjust the till oi the disobey sides.
PIN-BALANCE
Adjust the curvature otthe ten and ngtt sides olthe soreen image.
ROTATION
Adiust the tilt of binge.
MOIRE
Wetthetmiretevelotthescreen,
(Reduces the optical ettecl bl wavy lines on the asplay image.
These ettem are usually ntore noticeable on large gray areas or on black a
wh'ne check board patterns)
COLOR-TEMP
Adjust color tetnporctme to esoott. SSOOK' (notes: 930m is lamory delault)
or tor a custom color mode, select 'USER'.
Thts adjust the intenstly of me RGB video output. Using the select button
activate ttte Red. Green. Blue,
DEGAUSS
Manually oemag nefizes the CRT. This can be used it the display becomes
discolored.
Allow a Minion of 20 minutes to elapse between seat degauss.
The monitoralso will automatloaIty degattes when power is applied.
RECALL
Resets the control functions back to the original teemry preset values.
In ordertor the Recall irritation to work. the tinting must tell under one oi the
tactoty preset tinting modes.
LANGUAGE
Select a langtage atrlottg ENGLISH. DEUTSCH. FRENCH. SPANISH.
POR UGUESE.
E. AC INLET
Power com mnecflon.
b) NOTE:
Pawerwmis usedasmhpawerdlsmnnm dsvloein mlspmduct.
F. D-SUB CONNECTOR OF SIGNAL CABLE
Cmmmm me analog RGB signal output connector 01 IBM P812, oroonpatible
oompulen
® AC INLEI
b ACCESSORY
1. POWER CORD
2, INSTRUCTION MANUAL
INSTRUCTION MAM/AL
P PIN ASSIGIHENTS
RED VIDEO
GREEN VIDEO
BLUE VIDEO
RED GROUND
GREEN GROUND
801.001 DDC)
BLUE GROUND
MAKING THE RIGHT
CONNECTIONS
I, Make sure (he met Iomls memo: and the computersyflem is human OFF.
2. Connect ms DSUB comm of signal cable to system.
amrzectonsendolmepwmmwmis mnnorandmeomelsndlolhe wall
4 Turn Ws monknr ON.
5, Sum your system.
12
y;
b PICTURE TUBE
I7 ' (16V) dagonal measuremenl
Dot Type 0.2mm Pitch Black Matrix Screen" High resolution screen
Dark Faceptate Glassw High contrast screen
90‘ Deflection and mtmm Diameter Neck~~ Lowsrpower oohsunpiton
16 ’ Vtsual Susan Diagonal-~- Full-square type saeen
Anti-Static charge Face-- Electra static charge elmnated
HI-viewtsiiica coat, AMI-Glam. Amifletlefllon) Sudaoew Glare pmblsm eliminated
Invar Shadow Mask. .
7 INPUT SIGNAL
D>SUB INPUT
Analog RGB Video: 0.7Vpp/ 75 It
Sync; TTL Level
D SWEEP FREQUENCY
Hothontnl: 30-70KHz(AutmtIcalM
Vertical: 50<150HztAnt0matimltyI
b VIDEO BANDWIDTH
110"le Max.
P DISPLAY AREAI‘IG " Mable Sin)
Fult Size: 324 x 244mm
Preset Size: 305 x 225mm
D POWER INPUT
AC 100~240V, WERE VOLTAGE)
D POWER CONSUMPTION
toowanstmm
Power Saving: Less than 25W
P Dimensionlmxnxtt)
560mm X 520mm X Mum (Calm Box)
b waetrr
Net Weight: 16.4Kg, Gross Weight: 19.4Kg
P RESOLUTION
1230 dots X 1024 Iines(Max.)
b BBC 1125
b OSIXOn Scmh Display)
PbHOTE:
Techntbalspecflcahbnsalssubjemladlangewlthomnawe.
WSTBIIC'I'IOMMAMML
CAREFULLY SEI' THE MONITOR UPSIDE DOWN
A. INSTALLING THE TILT/SWIVEL STAND
t. Attgl the stand with the slots in Ihe bottom otthe monitor and Insert the Tull/Swivel
Sland Into the slots.
2. Push the Tit/Swivel Stand tinnly toward the tram otthe monitor until the Iaimes
stick into the locked position.
B. REMOVING THE "LT/SWIVEL STAND
a. Push the hook ot the owsrhack dim-mam,
b. Pull the stand to the tear at the monitor and Im the stand.
|_+
The video card should be corwletery
sealed in its slot.
Powerswllnh and computer pwrer switch should
be in the ON position.
The signal able should be oonvlelely connected
to the video oerd/corrvmer.
Check oonneciorlor bent or pushed-in pins,
Power switch should be in ltie ON posin‘on and the
flower cord should be oonnaoted.
Aquslslze and position controls to adjust the _|
Image.
.|
Wail approximately ten seconds alter making
311031an before changing ordisoonneclion me
slgnal or powering OFF the monitor, J
Check the pin assignments and signal llmminos 01
the monitor and your video card.
Move electrioal that may be causing electrical
inleriersnce away from me monitor,
Adjust the side pincusnion control
b Adrian Sle damn, dafidas Gerél nur in sine 240Vi220v) Schuko-
Steckdose singesteokt wlrd.
b Die Stockl‘loss some lederzeit irel zugéngidt sein, um bei einem av11.
ointmenoen Noltall das Germ schnell von der Strumersorgung zu lrermen.
> Men Sis desweiteren denim. dad dis Neuansoitwleimng niont
nleonanisch manspmonl nocn sonstwie bescnadlgt wird.
> Omien Sis niemels das will [in Innsren befinden sich Teile mlt
gelénrlloner Spanning.
b Savor sie das Geral Midge" zienen sle We can Netzstecksraus der
Sleokdose. samem Sie dos Gets! dann mll einern ieudllen Mineslalls
lroptnassen) Laws“.
b 085 Germ is! Iunkenlslm neon EN55022
> selenium-g:
Die h desem Geratentstanende Rorngenstrahlung ist ausrsionend
abgescrlnm (mask ill 0.1m mm wenigsrals LDiuth).
Die Bescnlewigungsspamig benigt maximal ZBKV.
P Stallen Sis das Germ an elnem ergonomisch gunsligen on out und sorgen
Sis claim, 08/7 def semi des Monitors mil neoh film‘s/10,80
waiter Pelbherie sichergestellt ist.
b Masdiiieruanrinlorrnafionsverordnung 3. GSGV, 18.0191 1 Der
abensvlatzbemgane Sualdmclqiegel betragt 70dBiA) oder wenioer
99nd}? ISO 77791
Falls 313 dennooh Fragen haben, aul die Bedienungesnleitung keine
Anlwofk gebsn kann, so Immaktlersn Sis bill/e den nachstsn Fachhandlerl

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Modify Date                     : 1999:07:19 11:55:25
Creator                         : Acrobat 3.0 Scan Plug-in
Producer                        : Acrobat 3.0 Scan Plug-in
Create Date                     : 1999:07:19 11:54:09
Page Count                      : 8

EXIF Metadata provided by EXIF.tools