Ortek Technology PKB1760 Wireless Palm Style with Trackball User Manual PKB 1760 Keyboard manual
Ortek Technology Inc Wireless Palm Style with Trackball PKB 1760 Keyboard manual
manual

Wireless Palm Style Keyboard with 
Trackball 
User’s Manual 
Version 1.0 2011/3 
ID NO:   
 1
About This Manual 
This manual is designed to assist you in installing and using the 
Wireless palm style Keyboard. Information in this document has 
been carefully checked for accuracy; however, no guarantee is given 
to the correctness of the contents. The information in this document 
is subject to change without notice. 
Edition 
1st Edition,   
Copyright 
© Copyright 2011 
This document contains proprietary information protected by 
copyright. All rights are reserved. No part of this manual may be 
reproduced by any mechanical, electronic or other means, in any 
form, without prior written permission of the manufacturer. 
 2
FEDERAL COMMUNICATIONS COMMISSION STATEMENT 
This Equipment has been tested and found to comply with the limits 
for a class B digital device, pursuant to Part 15 of the Federal 
Communications Commission (FCC) rules. These limits are 
designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, 
uses, and can radiate radio frequency energy and, if not installed 
and used in accordance with the instructions, may cause harmful 
interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
  Reorient or relocate the receiving antenna. 
  Increase the separation between the equipment and receiver. 
  Connect the equipment into and outlet on a circuit different from 
that to which the receiver is connected. 
  Consult the dealer or an experienced radio/TV technician for 
help. 
WARNING 
A shielded-type power cord is required in order to meet FCC 
emission limits and to prevent interference to nearby radio and 
television reception. It is essential that only the supplied power cord 
be used. 
Use only shielded cables to connect I/O devices to this equipment. 
You are cautioned that changes or modifications not expressly 
approved by the party responsible for compliance could void your 
authority to operate the equipment. 
 3
15.21 
You are cautioned that changes or modifications not expressly 
approved by the part responsible for compliance could void the 
user’s authority to operate the equipment. 
15.105(b) 
This equipment has been tested and found to comply with the limits 
for a Class B digital device, pursuant to part 15 of the FCC rules. 
These limits are designed to provide reasonable protection against 
harmful interference in a residential installation. This equipment 
generates uses and can radiate radio frequency energy and, if not 
installed and used in accordance with the instructions, may cause 
harmful interference to radio communications. However, there is no 
guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off and 
on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
-Reorient or relocate the receiving antenna. 
-Increase the separation between the equipment and receiver. 
-Connect the equipment into an outlet on a circuit different from that 
to which the receiver is connected. 
-Consult the dealer or an experienced radio/TV technician for help. 
Operation is subject to the following two conditions: 
1) this device may not cause interference and 
2) this device must accept any interference, including interference 
that may cause undesired operation of the device. 
 4
1.  INTRODUCTION 
Thank you for purchasing the Wireless Mini Keyboard with 
Touchpad. This User’s Manual contains information that will help 
you to operate your keyboard as well as answer questions about 
certain special keys and buttons. 
 MCE Buttons: My Music, My Videos, My Pictures, My TV, 
My Radio, DVD.   
 Internet Buttons: WWW, E-mail, Back, Forward   
 Multimedia Buttons: Volume down, Volume up, Mute, Pre 
track, Next track, Play/Pause and Stop   
Note: 1. All the MCE buttons need to work under MCE 
application. If press in Windows XP or Vista, will not work. 
2. The MCE, Internet, Multimedia hotkeys, Start, and 
Window key can not work under Linux.   
2.  SYSTEM REQUIREMENTS 
 Microsoft Windows® XP with MCE/ Vista/Windows 7/Linux 
operating system   
  Microsoft Internet Explorer 6.0 or later. 
3.  INSTALLATION 
 Connect the receiver to your PC USB port. 
 A Windows dialog box, New Hardware Found. 
 Install the battery to your keyboard and turn it on. 
 Start to use your wireless keyboard. 
Note: After 30 minutes non-operation, the keyboard will go to 
sleep mode. Please press any key to wake up.   

 5
4. Keyboard Button Functions     
Function Name  Function Description 
 Start  Open the MCE application.   
 Play/Pause 
Switches between Play and Pause of 
DVD/VCD/MP3/Audio media. Once Pause is 
pressed, pressing this button again resumes 
play. 
 Stop  Stops playing the media. 
 Next track  Switches to the next media track. Press once 
for each subsequent media track. 
 Pre-track  Switches to the previous media track. Press 
once for each preceding media track. 
 Mute  Mutes the computer’s sound volume. Press it 
again to turn the system volume back on. 
 V-  Decreases the computer’s sound volume.   
Hold down to decrease volume more quickly. 
 V+  Increases the computer’s sound volume.   
Hold down to increase volume more quickly. 
20 Enhanced Function Keys: (12 Embedded MCE Hotkeys+4 Internet 
hotkeys+4 addition hotkeys that are controlled by the “Fn Key”) 
Fn  Fn key  Enables the 20 Embedded Keys, press the 
Fn key to enable the hotkey. 
 1: My Music  Open My Music application 
 2: My Video  Open My Videos application. 
 3: My Picture  Open My Pictures application. 
4: My Radio  Open My Radio application. 

 6
 5: My TV  Open My TV application. 
 6: DVD  Open DVD menu application. 
 7: Flip 3D  Call the Flip 3D function 
 8: Win Select  Call the Win Select function. 
 9:Zoom in  Zoom in the picture. 
 0:Zoom out  Zoom out the picture. 
 -: Minimum Minimum all current windows. Press again to 
recover. 
 =: Close  Close the active Windows® application. 
 Back 
Goes back to a previous item that was 
already viewed in programs that support the 
“Back” command, such as a Web browser 
 Forward 
Goes to the next item—if it was previously 
viewed in the same session, in programs 
that support the “Forward” command, such 
as a Web browser. 
 WWW 
Starts the default Web browser and goes to 
the home page. If the Web browser is active, 
it opens the home page.   
 Email  Starts the default e-mail program. 
PgUp  Page Up  Keyboard “Page Up” function. 
PgDn  Page Down  Keyboard “Page Down” function. 
Home  Home  Keyboard “Home” function. 
End  End  Keyboard “End” function. 

 7
5. Trackball 
To adjust the touchpad, you can go to  【Control Panel】→ 
【Mouse】→【Pointer Options】to select a pointer speed.   

 8
Scroll function: Using the scrolling pad to up and down. 
6. Troubleshooting   
 Wireless Product Does Not Work 
  Make sure you have connected the receiver correctly.   
  Make sure you have installed the batteries correctly. Check 
to make sure the batteries you have installed are not dead. 
Try the batteries in another device. 
  Try unplugging then reconnecting the receiver to the 
computer and press the ID button at back of the keyboard.   
  When it connected, the led of the receiver will start flashing.   
 9
 RF Distance Does Not Reach 10M 
It is possible that computer monitor (or a large metal object) 
may be interfering with the receiver's radio reception. Also, the 
batteries may be low. Check the batteries status. You may also 
need to re-establish the connection between the keyboard and 
receiver.  
 The touchpad can not work normally when power on 
To avoid this issue, please use the touchpad after 2 seconds. 
Because the touchpad need correction by itself when power on.