Ortek Technology WKP110 Wireless Mobile Keypad User Manual WKP 110 manual

Ortek Technology Inc Wireless Mobile Keypad WKP 110 manual

Users Manual

0 Wireless Mobile Keypad User’s Manual Version: 1.0 2004/10 ID NO: PAK-
1 Federal Communications Commission Statement Notice 1 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. Notice 2 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
2 Introduction This manual is designed to assist you in installing and using the Wireless Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. System Requirements  Microsoft® Windows® 98/Me/2000/XP and MAC OS.  One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows®98/Me 1. Plug the USB receiver connector to your PC. 2. The Add New Hardware Wizard appears. 3. Click Next. The locate driver screen appears. 4. Select “Search for the best driver for your device. (Recommended),” and then click Next. The wizard searches for the appropriate device driver. 5. Click Finish to complete the driver installation. You are now ready to begin using your wireless keypad.
3 Connection with Windows 2000/XP 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. You are now ready to begin using your wireless keypad Connection with MAC OS Plug the USB receiver connector to MAC then you can start to use your wireless keypad. ID setting There are two methods for receiver to enter “Setup phase”. 1. Power ID search: When plug in USB host or PC power on keypad will enter “Setup phase” until receive first valid packet. The LED indicator will flash 1 minute to indicate ID search mode 2. Button ID search: Plug the receiver into your notebook’s USB port, then pressing the ID button on the back of the keypad.
4 Power Switch: There is a power switch at back of the keypad. If you don’t use the keypad, you can switch it to OFF to save the battery. Keypad feature description: Normally, when users input numbers from a USB keypad, the notebook’s Num Lock function will be enabled as well. Users have to disable Num Lock function before inputting characters from a notebook. The enable and disable process will always showing every time when users input numbers from a keypad and it is cumbersome for all the users. If users want to solve this problem, they need to install driver. But our new keypad has no synchronized problem; users can use the keypad and inputting characters from a notebook at the same time. Especially, it doesn’t need any drivers and support Plug & Play. Users just need to plug it into the USB port, and then users can use it smoothly. This new wireless keypad also can use under PC or MAC without any driver. It can detect the PC mode or MAC mode automatically, no other steps needed.
5 Keys description: Key location Usage 1 End Num Lock ON: Keypad 1 Num Lock OFF: End 2 ↓ Num Lock ON: Keypad 2 Num Lock OFF: ↓ 3 PgDn Num Lock ON: Keypad 3 Num Lock OFF: PgDn 4 ← Num Lock ON: Keypad 4 Num Lock OFF:← 5 Num Lock ON: Keypad 5 Num Lock OFF: No function 6 → Num Lock ON: Keypad 6 Num Lock OFF: → 7 Home Num Lock ON: Keypad 7 Num Lock OFF: Home 8 ↑ Num Lock ON: Keypad 8 Num Lock OFF: ↑ 9 PgUp Num Lock ON: Keypad 9 Num Lock OFF: Pg Up 0 Ins Num Lock ON: Keypad 0 Num Lock OFF: Ins 00 Num Lock ON: Keypad 0*2 Num Lock OFF: ，
6 . Del Num Lock ON: Keypad . Num Lock OFF: Del / Num Lock ON & OFF: Keypad / * Num Lock ON & OFF: Keypad * - Num Lock ON & OFF: Keypad - + Num Lock ON: Keypad + Num Lock OFF: = Enter Keyboard Return Bk Sp ← Keyboard Back Space Num Lock Keypad Num Lock
7 Specification of WKP-100 Operation Force 55±15gm Weight 150gm Total Travel 2.2 mm Operation Frequency 27 MHz/ 1 communication channel/ 1M distance Battery type 1 *AA Nickel-Metal Hydride battery Dimension: L×W×H 134 x 89 x 24 mm Receiver Connector USB Working mode: 8mA max TX Suspend mode: <100 uA Power consumption RX Working mode: 20mA max Switch Life 3 million cycles Keycaps type Low profile

Navigation menu