Ortek Technology WKP200 Wireless Calculator Mobile Mini Keypad User Manual WKP 200 manual

Ortek Technology Inc Wireless Calculator Mobile Mini Keypad WKP 200 manual

User Manual

0 Federal Communications Commission Statement  Notice 1  You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment.   Notice 2  This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
1   Introduction Congratulations on your purchase of the Wireless Calculator Mobile Mini Keypad. This new wireless keypad combines special Tax, Euro and Currency rate calculating functions. It makes the calculation process more easily and more convenient.   System Requirements  Microsoft® Windows® 98/Me/2000/XP compatible  One USB v. 1.1 or 2.0 Compliant Port Installation Connection with Windows®98/Me 1.  Plug the USB receiver connector to your PC. 2.  The Add New Hardware Wizard appears. 3. Click Next. The locate driver screen appears. 4.  Select “Search for the best driver for your device.     (Recommended),” and then click Next. The wizard searches for the appropriate device driver. 5. Click Finish to complete the driver installation.   You are now ready to begin using your wireless keypad.
2 Windows 2000/XP Operating System 1. Plug the USB receiver connector to your PC. 2. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. You are now ready to begin using your wireless keypad  Using the Wireless Calculator/Keypad Turning the keypad Off and On To turn on the keypad, press the CE/AC key, located directly above the number seven key. The keypad starts in calculator mode and displays “0”. The keypad will automatically go to sleep mode after two minutes of non-operation under calculator mode. You can press CE/AC key to wake up. Or you can press the CE/AC key for two seconds to turn off it.    ID setting Plug the receiver into your notebook’s USB port and turn on the wireless keypad. Pressing the ID button on the receiver, then the ID setting is accomplished.
3   Description of the function keys Key Functions  Definition M+  Adds the current display from the content of memory. M-  Subtracts the current display from the content of memory. MRC I.  First push, as MR key, transfers the contents of the memory register into the display register. II.  Second push, as MC key, clears the memory. DEC I. Calculator mode: Specifies the number of decimal places for rounding. II. Keypad mode: As the “Tab” function +/-  Switches the sign of the displayed value between positive (+) and negative (-). % I. Use this key in combination with arithmetic operator keys to perform percent. II. Setting TAX rate. € I. Calculator mode: Setting Euro rate. II. Keypad mode: Input “€” symbol.
4 CUR  Setting currency and exchange rate. √ Extracts the square root of a positive number displayed in the entry register. MODE  Change mode between the calculator and the keypad status. SEND  Send the calculation result to PC when the device is in calculator mode or in keypad mode. Fn Combination key with Tax– and Tax+ function. When you completed the setting of Tax rate, press the Fn key with Tax– or Tax+ key; the calculation result will be changed.   Tax –  Price-less-tax calculation. Tax +  Price-plus-tax calculation. When Num Off, the input symbol will be “=”. Special Function: This new keypad has no synchronized problem; users can use the keypad and inputting characters from a notebook at the same time. Especially, it doesn’t need any drivers and fully support Plug & Play.
5 No matter the Host’s Num Lock function status, users can choose the Num Key or direction key on the keypad. When users press the keypad’s Num Lock key once, it can change the keypad’s Num Lock status. If press the Num Lock key until 0.8 sec, then the Host’s Num Lock status will be changed. This function is designed for some special software, like Excel. Users can know the Num Lock status on the screen and don’t need to care the keypad’s Num Lock status. It makes the method of operation easily.  About the Display The display shows the number you input, calculation results, and various indicators showing the status of the calculator. -MINUS  Negative value indicator MEM  Independent memory indicator ERR Error indicator ‘  3-digit separator (apostrophe) CALC  Indicate you are in calculator status KEYPAD  Indicate you are in keypad status GT Grant total CUR  Price-multiply-CUR calculation EURO  Price-multiply -EURO calculation
6 Rounding Selector & Decimal Place Selector   Rounding Selector Specified the rounding system F  Floating decimal point system, which displays the value without rounding. 0,2,4  Number of decimal places for the 5/4 setting of the Rounding Selector. A The “Add Mode” automatically adds a decimal point and two decimal places to all values, even if you don’t input a decimal point. This mode is very useful when performing calculations in dollars or other monetary systems that require two decimal places. Two decimal places are not added in this mode if you press the DEL key while inputting a value, or for any operation other than addition and subtraction.  Setting EURO and CUR Function  CUR and €:Press CUR or € key for 1~1.5 sec, the “CUR” or “Euro” indicator on the LCD will start flashing. Input your desire parameter then press CUR or € key again. The “CUR” or “Euro” indicator will disappear; it means the setting is accomplished. When LCD displays “0”, you can press the “CUR” and “Euro” to enable or disable the indicator on the LCD. When the numerals
7 display on the LCD. Press the “CUR” or “Euro” button, and then it will exchange to the currency or tax rate. For example:Supposing the CUR parameter is 34 and the Euro parameter is 105; the calculation result is 180.   The “CUR” or “Euro” indicator display on the LCD: Press CUR key, then the calculation result will be 6120 (180*34). Press Euro key, then the calculation result will be 18900 (180*105). The “CUR” or “Euro” indicator didn’t display on the LCD: Press CUR key, then the calculation result will be 5.29 (180/34). Press Euro key, then the calculation result will be 1.17 (180/105). Setting Tax Function: Press “%” key for 1~1.5 sec, the “TAX” indicator on the LCD will start flashing. Input your desire parameter then press “%” key again. The “TAX” indicator will disappear; it means the setting is accomplished. For example :Supposing the Tax parameter is 10 and the calculation result is 180.   Press Fn & Tax+ key, then the calculation result will be 198(180*(1+0.1)). Press Fn & Tax- key, then the calculation result will be 163.63 (180/(1+0.1))
8 Specification of WKP-200 Operation Force  60±15gm Weight 180 gm Total Travel  2.2 mm Operation Frequency  27 MHz/ 1 communication channel/ 1M distance Battery type  2 *AAA batteries Dimension: L×W×H 161×90×26.5mm Receiver Connector    USB Working mode: 10 mA max TX Suspend mode: <300 uA Working mode: 16mA max Power consumption RX  Switch Life  5 million cycles Keycaps type  Low profile Agency Approvals  FCC, CE
9 Extension Cable: You can use the extension cable to avoid the RF interference. Troubleshooting When you turn on the keypad, if the keypad’s LCD shows abnormal or nothing, check your battery first. If the battery is working fine, try to find an acicular metal and plug into the reset hole (in the back of the keypad). Then the keypad will work normally. If the problem was still unsolved, please contact the technical support.  Low Battery Status  Battery Low:  LED flash (0.4 sec ON, 0.4 sec OFF) Note: Please replace the batteries when the Battery low LED starts flashing.
10  Battery Power Switch:   To save the power of the battery, switch On and Off the battery power button at the back of the calculator keypad.

Navigation menu