Ortek Technology WKP3000 Bluetooth Keypad User Manual WKP 3000 user s manual
Ortek Technology Inc Bluetooth Keypad WKP 3000 user s manual
user manual
Bluetooth Keypad User’s Manual About This Manual This manual is designed to assist you in installing and using the Bluetooth Keypad. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subject to change without notice. Edition 1st Edition, Copyright © Copyright 2007 This document contains proprietary information protected by copyright. All rights are reserved. No part of this manual may be reproduced by any mechanical, electronic or other means, in any form, without prior written permission of the manufacturer. Trademarks All trademarks and registered trademarks are the property of their respective owners. Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. System Requirements Microsoft® Windows® 98/Me/2000/XP/Vista compatible Build-in Bluetooth module or Bluetooth dongle. Device pairing Widcomm software: 1. Right click on the BT icon and choose “Explore My Bluetooth Places” 2. Press the ID button at back of the Bluetooth keypad, then the led will start flashing. 3. Click the “Search for devices in range” option, the “keypad” will be found. 4. Double click on the “Keypad” icon, it will pop-up another windows. Just follow the screen display to input the Pin Code then press “enter” (the keypads enter). 5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 6. The Bluetooth icon will become to . The Bluetooth keypad is ready to use. Toshiba software: 1. Right click on the BT icon and choose “Add New Connection” 2. Press the ID button at back of the Bluetooth keypad, then the led will start flashing. 3. Click “Next” 4. Choose the “Keypad” device and click “Next” 5. Just follow the screen display to input the Pin Code then press “enter” (the keypads enter). 6. Click “Next” 7. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 8. The Bluetooth icon will become to . The Bluetooth keypad is ready to use. IVT Software: 1. Press the ID button at back of the Bluetooth keypad, then the led will start flashing. 2. Double click the BT icon on the system tray and it wills pop-up a windows. Choose “My Bluetooth” → ” Bluetooth Device Discovery” 3. It will find the “Keypad” device. Right click on the keypad icon and choose “”Connect” → ” Bluetooth Human Interface Device Service” 4. Just follow the screen display to input the Passkey then press “enter” (the keypads enter). 5. The Found New Hardware Wizard appears and the OS will install the driver automatically. No other steps are necessary. 6. The Bluetooth icon will become to . The Bluetooth keypad is ready to use. Key function Calculator mode Definition Key Functions M+ M- MRC TAB +/% Adds the current display from the content of memory. Subtracts the current display from the content of memory. i. First push, as MR key, transfers the contents of the memory register into the display register. ii. Second push, as MC key, clears the memory. Calculator mode: Specifies the number of decimal places for rounding. Switches the sign of the displayed value between positive (+) and negative (-). Use this key in combination with arithmetic operator keys to perform percent MODE Change mode between the calculator and the keypad status. SEND Send the calculation result to PC when the device is in calculator mode or in keypad mode. 10 Keypad mode: Function Name + Function Description Numlock ON: Input “+” symbol Numlock OFF: Input “=” symbol - Input “-” symbol Input “*” symbol Input “/” symbol BK SP ← ‧ AS the keyboard BackSpace function Numlock ON: Input “‧” symbol Del Numlock OFF: As the keyboard “del” function. 00 Numlock ON: Input “00” symbol , Numlock OFF: Input “,” symbol Pre-track Next-track VMute V+ Switches to the previous media track. Press once for each preceding media track. Switches to the next media track. Press once for each preceding media track. Decreases the computer’s sound volume. Turn left to decrease volume. Mutes the computer’s sound volume. Press it again to turn the system volume back on. Increases the computer’s sound volume. Turn right to increase volume. 11 Stop Play/pause Calculator Stops playing the media. Once Pause is pressed, pressing this button again resumes play. Starts Microsoft Calculator About the Display The display shows the number you input, calculation results, and various indicators showing the status of the calculator. -MINUS Negative value indicator MEMORY Independent memory indicator ERROR Error indicator ‘ 3-digit separator (apostrophe) CALC Indicate you are in calculator status Indicate you are in keypad status KEYPAD GT Grant total Rounding Selector & Decimal Place Selector ¾ Press TAB To Rounding Selector Specified the rounding system Floating decimal point system, which displays the value without rounding. Number of decimal places for the 5/4 setting of the Rounding 0,2,4 Selector. The “Add Mode” automatically adds a decimal point and two decimal places to all values, even if you don’t input a decimal point. This mode is very useful when performing calculations in dollars or other monetary systems that require two decimal places. Two decimal places are not added in this mode if you press the DEL key while inputting a value, or for any operation other than addition and subtraction. 12
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.4 Linearized : No Encryption : Standard V2.3 (128-bit) User Access : Print, Extract XMP Toolkit : 3.1-701 Producer : Acrobat Distiller 7.0.5 (Windows) Creator Tool : PScript5.dll Version 5.2 Modify Date : 2007:10:24 16:14:17+08:00 Create Date : 2007:10:24 16:14:17+08:00 Format : application/pdf Title : Microsoft Word - WKP-3000 user's manual.doc Creator : elisa_chen Document ID : uuid:3178901d-66ba-4594-bbc9-721aba4c8859 Instance ID : uuid:ef3fbb22-9701-4396-b4db-f16f83d2121f Page Count : 13 Author : elisa_chenEXIF Metadata provided by EXIF.tools