Oticon A S FU2ITE ITC/ITE Fusion 2 User Manual COMPANY LETTER HEAD
Oticon A/S ITC/ITE Fusion 2 COMPANY LETTER HEAD
Installation Guide.pdf
PEOPLE FIRST Oticon Radio Model - Quick Installation Guide Radio Model Name: ITC/ITE Fusion 2 The ITC/ITE Fusion 2 radio model is a low power, short range, inductive radio transceiver working at 3.84 MHz. It can be seen below: Amplifier ITC/ITE Fusion 2 Radio Model The most important parts of the module are an amplifier (containing a Digital-Signal-Processor (DSP), a radio Front-End (FE), memory and smaller components), a telecoil, an antenna coil and one or two microphones, all mounted on a plastic faceplate. Externally to the faceplate there is normally also an audio receiver/speaker and some optional push buttons in ITC/ITE hearing aids, but they are not part of the radio model. The DSP, FE, memory and smaller components in the amplifier are all mounted on a flexible Printed-Circuit-Board (PCB), which is connected to the antenna through three twisted wires. The FE is a complete radio transceiver, including both transmitter, receiver and local oscillators. The module also includes all voltage regulators inside the DSP and FE and buffered data programming inputs on board. The module only requires a battery and the external speaker to be attached in order to run. All components are kept in place by a mechanical carrier building up the radio model, which is intended to be installed as a module into Oticon wireless hearing aid devices only. Oticon A/S Main +45 39 17 71 00 Kongebakken 9 Fax +45 39 27 79 00 DK-2765 Smørum Denmark www.oticon.com CVR-no. 42334219 PEOPLE FIRST Oticon Radio Model - Regulatory Label Information Radio Model Name: ITC/ITE Fusion 2 Contains: U28FU2ITE 1350B-FU2ITE FCC ID: IC: NOTICE: This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by Oticon A/S may void the FCC authorization to operate this equipment. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. Oticon A/S Main +45 39 17 71 00 Kongebakken 9 Fax +45 39 27 79 00 DK-2765 Smørum Denmark www.oticon.com CVR-no. 42334219
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : Yes Encryption : Standard V4.4 (128-bit) User Access : Print, Extract Author : PC-8726 Create Date : 2012:11:29 12:01:22+01:00 Modify Date : 2012:12:04 10:23:46+01:00 Subject : Tagged PDF : Yes XMP Toolkit : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04 Metadata Date : 2012:12:04 10:23:46+01:00 Creator Tool : Acrobat PDFMaker 9.1 for Word Document ID : uuid:2aa06ddc-385d-48be-abb0-7e8a4c15cd88 Instance ID : uuid:aaf895e0-f963-4437-ad25-97673dfc3c9a Format : application/pdf Title : < COMPANY LETTER HEAD> Description : Creator : PC-8726 Producer : Adobe PDF Library 9.0 Keywords : Source Modified : D:20121129110004 Company : Cetecom Page Layout : OneColumn Page Count : 2EXIF Metadata provided by EXIF.tools