Oticon A S TVBOX01 TV Sound Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	1066679
Application ID	Yh8gnWTgvgeVc/2w6RTYMg==
Document Description	user manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	123.52kB (1543963 bits)
Date Submitted	2009-02-10 00:00:00
Date Available	2009-02-10 00:00:00
Creation Date	2009-01-22 13:42:12
Producing Software	Adobe PDF Library 8.0
Document Lastmod	2009-01-22 13:42:14
Document Title	user manual
Document Creator	Adobe InDesign CS3 (5.0.4)

TV Sound Transmitter OVERVIEW
USING THE STREAMER and SUPPORT
Back
Place the TV Sound Transmitter in suitable spot close to the TV.
For using the Streamer with the TV Sound Transmitter, refer to
the user guide.
Turn off the TV Sound Transmitter
The TV Sound Transmitter uses very little power so it is not
necessary to turn it off .
Before your hearing instruments can receive the TV sound,
the TV Sound Transmitter must be connected to the TV and a
power outlet.
This is an easy guide through the installation of the TV Sound
Transmitter. Once the installation is complete this manual is
no longer required.
All needed parts for the installation are included in the package.
TV connection
Power connection
The connection parts are packed in numbered boxes from 1 to 3.
The numbers are referring to each step in the installation.
Front
Power indicator
Status indicator
Light
Solid
Off
Light
Solid
Meaning
Power on
Power off
Off
Flashing
Meaning
Connected
to streamer
and streaming TV sound
Stand-by
Pairing
Product approval
precautions and markings
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Tv sound range
TV Sound Transmitter has a range of about 10 meters depending on furnitures and placement.
To comply with FCC RF exposure requirements, the device and the antenna
for this device must be installed to ensure a minimum separation distance
of 20 cm or more from a person’s body. Other operating configurations
should be avoided.
Connection with scart adapter
If you connect the TV Sound Transmitter with the scart adapter
you will only hear audio from the TV tuner with TV Sound
Transmitter. Audio from other sources such as DVD or VCR will
not be played in the hearing instruments. This is a limitation
of the scart connector.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation.
For further support or tips you can check the ConnectLine
information on www.connectlineURL.com
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Product approval
precautions and markings
Oticon hereby declares that this TV Sound Transmitter, TV 75-01 is in compliance with the essential requirements and other relevant provisions of
Directive 1999/5/EC.
Declaration of conformity is available at:
Oticon A/S
Kongebakken 9
DK-2765 Smørum
Denmark
www.oticon.com
0678
Waste from electronic
equipment must be
handled according to
local regulations.
Use the following switch mode power supply with your TV Sound Transmitter:
Fuhua, Model No. UE10W-050020SPC, Input: 100-240V AC 150mA 50-60Hz,
Output: 5V DC 200mA
Warnings
The TV Sound Transmitter is not a toy and therefore should be kept out of
the reach of children and anyone else who might swallow parts or otherwise
cause injury to themselves. Special attention should be paid to the smaller
components in order to prevent children from swallowing them and choking.
If a part is swallowed, see a doctor immediately.
The safety of the use of the TV Sound Transmitter with an auxiliary input
cable is determined by external signal source. When the input cable is
connected to mains operated equipment, this equipment must comply with
IEC-60065, IEC-60601 or equivalent safety standards.
The TV Sound Transmitter is designed to comply with the most stringent
Standards of International Electromagnetic Compatibility. However, the TV
Sound Transmitter might cause interference with other medical devices.
Please contact relevant personnel to obtain a permission before using the TV
Sound Transmitter in hospitals or similar venues.
908 69 010 00 / 01.09
Purpose of this guide
Connecting to power
Connecting to TV
Optional adapters for Connecting to TV
Option 1: SCART CONNECTION
Optional adapters for Connecting to TV
Option 2: headphone CONNECTION
INSTALLATION GUIDE
TV Sound Transmitter
Begin the installation by connecting power to the TV Sound
Transmitter.
Connect the TV to the TV Sound Transmitter.
Use the TV cord from box no. 2.
Use the Power adapter from box no. 1.
-C
 onnect the black plug on the TV cord to the connector marked B.
- Connect the red and white connectors to the “AUDIO OUT”
terminals on the TV. (typically marked “L - R” “AUDIO OUT” and
found on the TV back or bottom panel).
- Plug the power adapter into the wall socket or another power
source.
- Plug the power cord into the power connection marked A.
- Check that power is turned on and there is a solid green light
in the Power indicator on the front of the TV Sound Transmitter.
If the TV has is no “L - R” RCA Phono “OUTPUT”, an adapter should
be used for connecting the TV cord. Then proceed to step 3.
The installation is now complete and can be checked by using your
Streamer (refer to the user guide).
If an adapter must be used for connecting the TV cord to the
TV set, this is found in box no. 3. If installation completed in
step 2, box no. 3 is not used!
SCART CONNECTION using the SCART adapter.
- Connect the Audio cord to the red and white terminals on the
SCART adapter and plug it into the TV’s SCART connection.
If you have a DVD or a Sat box connected to the SCART, you
should use option 2 instead.
HEADPHONE CONNECTION using the Jack adapter.
- Connect the TV cord to the jack adapter and plug it into the
TV’s headphone output.
The head phone output may be found on the side or front of
the TV.
Notice: The TV speakers may be muted when connecting to the
headphone output.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : No
XMP Toolkit                     : Adobe XMP Core 4.1-c037 46.282696, Mon Apr 02 2007 18:36:42
Instance ID                     : uuid:81844930-1f42-41d9-85a9-dc4cc4094133
Document ID                     : adobe:docid:indd:204e3b4a-b7b2-11dd-bb56-80dabfaa4499
Rendition Class                 : proof:pdf
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:4714add4-8e0b-4bc0-8699-d7d96f2dbd62, uuid:4714add4-8e0b-4bc0-8699-d7d96f2dbd62, uuid:de614a3e-639b-4f41-9541-1010b3da200a, uuid:3397cebe-4ccc-4630-bea1-1943788238aa, uuid:CE6ABE5E7DE8DD11988EB373E6CD6EA8, uuid:50D8D09767E8DD11988EB373E6CD6EA8, uuid:4ED8D09767E8DD11988EB373E6CD6EA8, uuid:4FD8D09767E8DD11988EB373E6CD6EA8, uuid:ae8610e6-54e5-4066-bf69-41893a6f8d86, uuid:4714add4-8e0b-4bc0-8699-d7d96f2dbd62, uuid:cc542d6a-85c5-490e-9fe6-715417898cc9, uuid:cc542d6a-85c5-490e-9fe6-715417898cc9, uuid:cc542d6a-85c5-490e-9fe6-715417898cc9, uuid:cc542d6a-85c5-490e-9fe6-715417898cc9, uuid:af8d3cb7-b667-4ff0-b6b3-ec34656db818, uuid:dd59c61b-0cb7-41d0-8094-4c128551f1c6, uuid:426AA29B7ADDDD11A956AD6B8353509F
Manifest Reference Document ID  : uuid:8C230AA930C8DD119F5B80F59418EC91, uuid:8C230AA930C8DD119F5B80F59418EC91, uuid:91521B5668DDDD11A956AD6B8353509F, uuid:b714e3b0-6890-43f5-8913-65e5c14c76b3, uuid:D5DFB5DA08C2DD11B2059F3D01111B9E, uuid:7BEAE25F86C7DD119DF5C1A88023FF26, uuid:B57839DBDBC1DD11B2059F3D01111B9E, uuid:B87839DBDBC1DD11B2059F3D01111B9E, uuid:76EAE25F86C7DD119DF5C1A88023FF26, uuid:8C230AA930C8DD119F5B80F59418EC91, uuid:94521B5668DDDD11A956AD6B8353509F, uuid:94521B5668DDDD11A956AD6B8353509F, uuid:94521B5668DDDD11A956AD6B8353509F, uuid:94521B5668DDDD11A956AD6B8353509F, uuid:1C12C573D2BADD1187D7E4FE03C71D3A, uuid:B5FB0BA8F2BADD1187D7E4FE03C71D3A, uuid:406AA29B7ADDDD11A956AD6B8353509F
Create Date                     : 2009:01:22 13:42:12+01:00
Modify Date                     : 2009:01:22 13:42:14+01:00
Metadata Date                   : 2009:01:22 13:42:14+01:00
Creator Tool                    : Adobe InDesign CS3 (5.0.4)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 6349 bytes, use -b option to extract)
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 2
Creator                         : Adobe InDesign CS3 (5.0.4)

EXIF Metadata provided by EXIF.tools