Ottlite Technologies M2A Part 15 Spread Spectrum Transmitter User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3088152
Application ID	Fc0ufqvYi4ZWww1WwIaGTg==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	117.01kB (1462590 bits)
Date Submitted	2016-08-04 00:00:00
Date Available	2016-08-04 00:00:00
Creation Date	2016-08-03 09:45:07
Producing Software	Adobe Acrobat 9.3 Image Conversion Plug-in
Document Lastmod	2016-08-03 09:45:18
Document Title	User Manual
Document Creator	Adobe Acrobat 9.3

LED Bluetooth® Speaker Lamp
D82G5Z Dszooz
INS160267
' Diagram 1
I Abblldung 1
M2A
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new
OttLiteO product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it
today by mail, or register online by going to: OttLite.com/warranty
NOTE: THIS UNIT IS FULLYASSEMBLED
1. Remove lamp from packing placing lamp body base (A) flat on a
steady surface.
2. Connect the AC Adapter input (H) into connector (J) in the
rear—bottom of the lamp.
3. Plug the A/C adapter (G) into a standard household 120V AC outlet.
Note: Only use with the supplied AC adapter to avoid damage
or fire.
4. Turn the lamp ON & OFF using power “touch" switch (C) located in the
front—upper side of base (A).
5. Lamp includes 5 LED brightness settings. To adjust LED brightness
settings, slightly touch “up” or “down” arrows (E) located next to
power switch (C). Upon turning ON lamp, it will initially set at the 3rd
LED brightness setting.
6. This lamp features a stereo speaker (M) with Bluetooth pairing and
auxiliary device direct plug-in capability to play music directly through
the speaker. Auxiliary input requires a 3.5mm audio cable (not included)
to connect your device to the unit.
7. Bluetooth pairing can be turned ON & OFF by using Bluetooth touch
switch (B) located below power switch (C). To engage Bluetooth
pairing operation perform the following:
0 Press and hold Bluetooth touch switch (B) to engage speaker (M)
until Bluetooth indicator light (N) begins to flash continually “flash"
meaning it is “ready to pair”;
0 Engage desired handheld device (such as mobile phone,
tablet, etc.) by searching for device “OttLite M2A" (LED Bluetooth®
Speaker Lamp) on handheld device Bluetooth settings,
click the device name to successfully pair and connect the
Bluetooth function.
0 The blue light will “slowly” flash showing a successful connection
has been made.
8. Perform the following to play music directly to speaker using auxiliary
device plug-in feature:
0 Press and hold Bluetooth touch switch (B) to engage speaker (M)
until Bluetooth indicator light (N) begins to flash. At this time the
speaker is in the default Bluetooth “ready to pair” mode.
0 Insert 3.5mm audio cable (not included) into AUX connection (K) in
the rear-bottom of the lamp.
“1)
9. Quickly press touch switches + and “-“ (D) for volume adjustment.
Touch switch “+” increases volume and touch switc - reduces
volume.
I‘ I!
10. Press and hold touch switches + and “—“ (D) to make a song track
change. Press and hold touch switch “+” to advance to the next song.
Press and hold touch switch “-“ to go back to the previous song.
NOTE: Skip function for song track change is only applicable to
Bluetooth mode.
11. To reposition the light, hold base (A) steady then grasp and adjust
either lamp arm (F) or shade (P) depending on needed position.
12. Refer to Diagrams 1 and 2 for lamp maximum adjustment range.
NOTE: DO NOT FORCE the shade or lamp body rotation outside
allowable adjustment range as excessive adjustment may cause
damage.
SAFETY WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC
SHOCK, OR INJURY TO PERSONS
1. Turn lamp off and WAIT UNTIL LAMP HEAD (P) IS COOL before
handling.
2. The LED panel (L) might get hot after several hours of continuous use,
DO NOT place your hands directly on LED light panel.
LED Bluetooth® Speaker Lamp
3. Never use with an extension cord unless the plug can be fully inserted
into the receptacles in the extension cord.
4. Do not alter the plug.
5. The lamp head included with this unit cannot be replaced by the
consumer.
NOTE: The important safety instructions appearing in this instruction
sheet are not meant to cover all possible conditions and situations that
may occur. It must be understood that common sense, caution, and
care must be used with any electrical product.
CAUTION I IF THE EXTERNAL FLEXIBLE CABLE OR CORD OF THIS LUMINAIRE
IS DAMAGED, IT SHALL BE EXCLUSIVELY REPLACED BY THE MANUFACTURER OR ITS
SERVICE AGENT OR A SIMILAR OUAUFIED PERSON IN ORDER TO AVOID A HAZARD.
INDOOR USE ONLY.
FCC PART I5
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However. there is no guarantee that the interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
0 Reorient or relocate the receiving antenna.
0 Increase the separation between the equipment and receiver.
0 Connect the equipment into an outlet on a circuit different from that of
the receiver.
0 Consult the dealer or an experienced radio/TV technician for help.
CAN ICES-3 (B)INMB-3 (B)
CAUTION .Any change or modification to product not expressly
recognized by OttLite Technologies voids OttLite’s responsibility for
proper function of product.
AC/DC ADAPTOR
Input: AC 100-240V, 50/60 Hz, 0.8A
Output: 12V DC, 2.0A with a Male DC Plug
Output power: 5W + 5W
Speaker: 2 inch, 4 ohms
Bluetooth v2.1
3.5mm audio cable is required for direct plug-in connection
(not included)
THIS LAMP CONTAINS a 5V-2.1 USB output (Q) located on the base of the
lamp. USB port can charge such items as tablets, cellular phones, etc.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
REV062216
FCC 200m Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 200m
between the radiator & your body. This transmitter must not be co-Iocated or operating in conjunction with any other antenna or transmitter.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 etla conformité a l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne surl'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Cet émetteur ne doit pas étre Co-placé ou ne fonctionnant en méme temps qu'aucune autre antenne ouémetteur. Cet équipement devrait étre installé et actionné avec une distance minimum de 20
centimetres entre le radiateur et votre corps.

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : Yes
Create Date                     : 2016:08:03 09:45:07+08:00
Creator                         : Adobe Acrobat 9.3
Modify Date                     : 2016:08:03 09:45:18+08:00
XMP Toolkit                     : Adobe XMP Core 4.2.1-c043 52.372728, 2009/01/18-15:08:04
Metadata Date                   : 2016:08:03 09:45:18+08:00
Creator Tool                    : Adobe Acrobat 9.3
Format                          : application/pdf
Document ID                     : uuid:61c77de0-209f-4a48-9865-e68a458879a1
Instance ID                     : uuid:1db9961b-4821-4d63-89b9-8061f061f918
Producer                        : Adobe Acrobat 9.3 Image Conversion Plug-in
Page Count                      : 2

EXIF Metadata provided by EXIF.tools