Outform UIM iDISPLAY MEDIA PLAYER User Manual Small tablets Rev01 25032014 1

Outform Ltd. iDISPLAY MEDIA PLAYER User Manual Small tablets Rev01 25032014 1

User Manual

Download: Outform UIM iDISPLAY MEDIA PLAYER User Manual Small tablets Rev01 25032014 1
Mirror Download [FCC.gov]Outform UIM iDISPLAY MEDIA PLAYER User Manual Small tablets Rev01 25032014 1
Document ID2407912
Application IDq4B5x/B3NaFHyxlNl8rvog==
Document DescriptionUser Manual
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeUser Manual
Display FormatAdobe Acrobat PDF - pdf
Filesize472.25kB (5903103 bits)
Date Submitted2014-10-01 00:00:00
Date Available2014-10-01 00:00:00
Creation Date2014-09-04 14:07:26
Producing SoftwareAdobe PDF library 9.90
Document Lastmod2014-09-30 17:30:38
Document TitleUser_Manual_Small_tablets_Rev01_25032014-1
Document CreatorAdobe Illustrator CS5

Media
Product
Media
device
Product
PRODUCT
device
Media
Media
device
Media Player
5V 2A
USB Cable
USB Mouse
device
Device
device
Media
Device
device
device
Media
device
LED
ethernet connector
Optical
HDMI output
AV jack(no Mic in function)
RECOVER button(Upgrade software )
Micro SD port for extend memory(up to 32G)
USB 2 (OTG)
USB 1 (host)
5V DC In – Power Input
device
device
device
use mouse
Operation
Back
Return to PulsePlayer
Exit
Exit PulsePlayer
Exit Event
To exit PulsePlayer, you can choose “Z gesture” or “Tapping screen 5 times” use mouse
or “Both” from the drop-down-list.
Z gesture detection accuracy
In order to exit the Pulse Player when playing video or picture, you can draw a big “Z” gesture
on the screen use mouse ,
the drop-down-menu, there are three choices “easy, medium and hard”.
Reboot
Reboot the device
Status bar options
If you choose “OFF”, it will hide status bar when the application is exited.
If you choose “ON”, it will not hide status bar when the application is exited.
Volume adjustment options
Enable/Disable volume adjustment via back volume button ,if the device have the
volume button.
Auto start PulsePlayer
Enable/Disable AutoStart Pulse Player (Note: if you disable auto start you will need to
remove all data if you wish to use the pulse player again)
Pulse Player Configuration
Change Password
If you want to change the password, you can set a new one in this dialog box.
Default password visibility options
If you choose “OFF”, it will disable showing the default password.
If you choose “ON”, it will enable showing the default password.
Password Validation feature options
If you choose “OFF”, it will disable the password validation feature when going to settings.
If you choose “ON”, it will enable the password validation feature when going to settings.
Image Interval Time
You can set the image interval time (2-200 seconds) between current image display
and the next one by setting the time at this dialog.
Pulse Player Configuration - Continued
Inactivity timeout
When you exit the display, there will be a dialog , the expiration time (3-200 seconds)
of the dialog depends on the setting you chose.
When you open a URL and do nothing, the expiration time (3-200 seconds) of browser
depends on the setting you chose.
Video ratio options
If you choose “OFF”, when playing video, it will not keep the original ratio, and will play
content in full screen.
If you choose “ON”, when playing video, it will keep the original ratio.
Player orientation options
If you choose “OFF”, it will disable portrait mode when device is rotated.
If you choose “ON”, it will enable portrait mode when device is rotated.
Touch Event
You can choose how to respond the touch event from the drop-down-list, “Open URL”,
“Play contents in folder/tp”, “Disabled”.
Log options
If you choose “OFF”, it will disable outputting logs to file.
If you choose “ON”, it will enable outputting logs to file.
URL configuration
Forward To
When you choose “Open URL” in “Touch event”, you can set up the URL in this popup
dialog.
Warning dialog expire time
When you open a URL and do nothing, there will be a warning dialog, the expiration
time (3-20 seconds) of warning dialog depends on what you set in this popup dialog.
Hardware acceleration options
Enable/Disable HW acceleration for video playback.
Progress Box options
Enable/Disable progress box when opening a URL.
Pulse Health configuration
Reboot Scheduler
You can set time to reboot the device at this dialog.
Reboot on Error
Enable/Disable reboot on internal error.
device
device
device
device
device
Frequently Asked Questions
device
device
device
use mouse
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/ TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure
limits, Human proximity to the antenna shall not be less than 20cm (8 inches) during normal
operation.

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.7
Linearized                      : Yes
Create Date                     : 2014:09:04 14:07:26+08:00
Creator                         : Adobe Illustrator CS5
Modify Date                     : 2014:09:30 17:30:38+08:00
Has XFA                         : No
XMP Toolkit                     : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00
Format                          : application/pdf
Title                           : User_Manual_Small_tablets_Rev01_25032014-1
Metadata Date                   : 2014:09:30 17:30:38+08:00
Creator Tool                    : Adobe Illustrator CS5
Thumbnail Width                 : 256
Thumbnail Height                : 200
Thumbnail Format                : JPEG
Thumbnail Image                 : (Binary data 4951 bytes, use -b option to extract)
Instance ID                     : uuid:0e112231-e810-49fb-90d9-b5a6711f2d9f
Document ID                     : xmp.did:6EB908B9F933E4118855F724740B3BA1
Original Document ID            : uuid:5D20892493BFDB11914A8590D31508C8
Rendition Class                 : proof:pdf
Derived From Instance ID        : uuid:0cd19f00-f134-4b68-a63d-0510ff698fc6
Derived From Document ID        : xmp.did:11CBB4F6452FE411AB78F0EDD3562677
Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8
Derived From Rendition Class    : proof:pdf
History Action                  : saved, saved, saved, saved
History Instance ID             : xmp.iid:626D28F445B1E31183A6D5B40F9F866A, xmp.iid:CCD3C8326EB4E311BB03A512EBC3F6FD, xmp.iid:11CBB4F6452FE411AB78F0EDD3562677, xmp.iid:6EB908B9F933E4118855F724740B3BA1
History When                    : 2014:03:21 14:12:55-08:00, 2014:03:25 14:57:16-08:00, 2014:08:29 14:30:26+08:00, 2014:09:04 14:07:24+08:00
History Software Agent          : Adobe Illustrator CS5, Adobe Illustrator CS6 (Windows), Adobe Illustrator CS5, Adobe Illustrator CS5
History Changed                 : /, /, /, /
Startup Profile                 : Print
Has Visible Overprint           : True
Has Visible Transparency        : True
N Pages                         : 1
Max Page Size W                 : 303.482940
Max Page Size H                 : 233.483423
Max Page Size Unit              : Millimeters
Font Name                       : SeravekBasic-ExtraLight
Font Family                     : Seravek Basic
Font Face                       : ExtraLight
Font Type                       : Open Type
Font Version                    : Version 1.000
Font Composite                  : False
Font File Name                  : SeravekBasic-ExtraLight.otf
Plate Names                     : Cyan, Magenta, Yellow, Black
Swatch Groups Group Name        : 默认色板组
Swatch Groups Group Type        : 0
Producer                        : Adobe PDF library 9.90
Page Count                      : 7
For                             : Administrator,
Bounding Box                    : 0 0 861 662
Container Version               : 11
Creator Version                 : 15
Image Height                    : 662
Image Width                     : 861
Image Size                      : 861x662
Megapixels                      : 0.570
EXIF Metadata provided by EXIF.tools
FCC ID Filing: 2AC8G-UIM

Navigation menu