P Q Controls RFTXA-418B User Manual Unknown

Download:
Mirror Download [FCC.gov]
Document ID	26702
Application ID	3EAZBnKXPo9soEelVBg1Zw==
Document Description	Assembly Procedure
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	20.29kB (253598 bits)
Date Submitted	1999-03-09 00:00:00
Date Available	1999-05-21 00:00:00
Creation Date	0000-00-00 00:00:00
Producing Software	Acrobat PDFWriter 3.0 for Windows
Document Lastmod	1999-02-26 09:07:08
Document Title	Unknown
Document Author:	rbedell

REV. | DESCRIPTION I DATE
NEXT HIGHER ASSEMBLY DESCRIPTION
418MH2 RADIO TRANSMITTER
WARNING: P70 CcnImIs. Inc. _ I | | ' me In
MWW'W’W P 55 Doolggi‘znrz‘:o 5, nc A~10331
d “M“ “"1 I" W' m" m Brislol, CT Demo
on us
in any q-n-rnl purpose devim. PHONE: (350) 583-5994
manumms mm mm. u P-O pmdums FAX; (550) 553-6011
Me an opzrulicn uhm
Lflrwi.%°fi'samxfsn“‘éuzsmzz"fiz’w°c% ASSEMBLY PROCEDURE — TRANSMITTER ASSY.
mull he irmflled and mummified In meat
aH oppwpriate 05m and my machine 41 8 MHz
suIely standards P-u Cnnlmls, Inc. shrill mam'sum
RBP
CHECK inga ENGINEER DATE
MI Mum responsibflity In! inslnlluhom
apphmlinn or mlely 01 system.
08—12—98
P_ C i I ) I ' m, N0. SHEET REV
QEI Q “I“ "C A—10331 2 OF 9
I. INSTALL INSERT INTO HOUSING
INSTALL INSERT
USE PUNCH (IE-10041)"
WITH ARBOR PRESS
TO INSTALL INSERT
' THREADED INSERT
A710334—632
HOUSING ~
D—09960 \
INSTALL AN INSERT, WITH AN ARBOR PRESS, FLUSH OR SIIGHTIY RFIOW
INTO THE HOUSING AS SHOWN.
me No. SHEET REV.
A—10331 3 OF 9
% P—Q ConIroIs, Inc.
2. DRILL OUT HOLES ON THE SWITCH POSITIONS NOT YET OPENED.
/~ $484 DRILL THRU
WHERE NECESSARY
ON HOUSINGS NEEDINC MORE SWITCH POSITIONS, DRILL OUT THE HOLES
NEEDED BY CENTERING THE DRILL OVER THE COUNTER BORE AND DRILLING
OUT THE HOLES IN THE POSITIONS NEEDED.
3. INSTALL BATTERY CONTACTS.
BATTERY CONTACT '
8—08164
SECTION A—A
INSERT THE 2 BATTERY CONTACTS INTO THE SLOTS IN THE HOUSING AS
SHOWN.
_ 1 l 1 I . DWG.N0. SHEET
% P Q C°nr°s "° A—10331 4 or 9
4. APPLY GASKET TO THE HOUSING
GASKET
3—09935 *
P-B Cantrnlst Inc.
CLEAN GASKET CAVITY WITH DENATURED ALCOHOL REMOVE ADHESIVE BACKING
FROM THE GASKET, AND APPLY THE GASKET TO THE HOUSING AS SHOWN.
5. APPLY BATTERY CASE LID GASKET TO THE HOUSING
GASKET '
8—03342
CLEAN CASKET AREA WITH DENATURED ALCOHOL. REMOVE ADHESIVE BACKING
FROM THE CASKET, AND APPLY THE GASKET TO TI IE HOUSING AS SHOWN.
P_ c i I ’ I . MC MD SNiET REV
$1 0 °”'°s ”C A—10331 5 or 9
6. INSTALL DECAL ONTO HOUSING
PANEL DECAL
PART # VARIES
WITH ORDER
CLEAN DECAL APPLICATION AREA WITH DENATURED ALCOHOL. REMOVE THE
ADHESIVE BACKING FROM THE DECAL, AND APPLY THE DECAL TO THE
HOUSING AS SHOWN.
7. INSTALL ANTENNA
., ANTENNA
1/2 540390
SOLDER ANTENNA ONTO BOARD AS SHOWN.
P_ C t I , I . GWENO. SHEET REVv
as 0 °“'°S "° A—10331 6 or 9
8. ATTACH THE BATTERY WIRES
BLACK WIRE
A—oo438—03—BK\ \\\\\ I
RED WIRE '
A— 00438— O3— RD
n-nwbn
PREPARE AND SOLDER THE BATTERY WIRES FROM THE BATTERY TERMINALS
TO THE PC BOARD AS SHOWN.
9 APPLY RTV TO BATTERY CONTACTS
' APPLY RTV
APPLY LOCTITE SELF LEVELINC RTV #5‘|40 TO THE CONTACTS AS SHOWN IN
VIEW ZI THE OBJECTIVE OF THE RTV IS TO SEAL THE SPACE BETWEEN THE
CONTACTS AND THE SLOTS IN THE HOUSING.
P_ C i | ’ I . M NO. SHEET RCV.
% Q °"'°s "C ‘ A~10331 I 7 OF 9
10. INSTALL PC BOARD
INT. TOOTH WASHER '
PC BOARD-"ma. (SUPPLIED WTH SWITCH) \
ASSY. \
XX RTV #738 ~.
lllI/QEE'JIM
7/1229,
WASHER WITH DOG — ————— SWITCH BOOT
(SUPPLIED WITH SWITCH) A—O7349—01
PLACE A BEAD OF RTV (#738) AROUND THE WASHER WITH THE DOG (TAB
POSITIONED TOWARD PC BOARD). INSERT SWITCHES THROUGH HOLES, AND
PRESS THE ASSEMBLY TOGETHER. BE SURE NO WIRES ARE CAUGHT BETWEEN
THE SWITCHES AND THE HOUSING. ASSEMBLY AND TIGHTEN THE WASHERS
AND THE BOOTS ONTO THE OTHER SIDE OF THE HOUSING AS SHOWN.
11. INSTALL BELT CLIP
BASE— ~~~~~
C—O9961
BELT CLIP
C—09963
POP RIVET
E22 A~°4°8°-02
_" ffff FLAT WASHER
A—O4082~04
POT RIVET THE BELT CLIP TO THE BASE USING THE PARTS SHOWN.
_ I | , . we No. SHEEV REV
%1P 0 Con ros Inc A—IO331 8 OF 9
12. ATTACH THE BASE TO THE HOUSING
O 'O'
BASE \_\
C—09961 \
SCREwm-MWLL
A—xxxxx “
6 PLACES
ATTACH THE BASE ASSEMBLY TO THE HOUSING ASSEMBLY WITH THE SCREWS
AS SHOWN. TIGHTEN SCREW TO A NOMINAL TORQUE OF: XX in~|b AND AN
ACCEPTABLE RANGE OF : XX inAIb MIN. AND: XX in—Ib MAXI
13. INSTALL DECAL ONTO BATTERY DOOR
/‘ BATTERY DOOR
" 0—09962
Ij P-O ConIroIs, Inc.
0 Brislol. CT USA
0—09962
I,D. DECAL >
8—08369
CLEAN DECAL APPLICATION AREA WITH DENATURED ALCOHOL. REMOVE THE
ADHESIVE BACKING FROM THE DECAL, AND APPLY THE DECAL TO THE
BATTERY DOOR AS SHOWN.
awn no
A—10331
SHEET REV
P— Cf|,| .
Oonrcs nc 90F9
14. ATTACH THE BATTERY DOOR
CAPTIVE PANEL SCREW
” A—10341—656
BATTERY DOOR ~
0—09962
THREAD THE CAPTIVE PANEL SCREW ONTO THE BATTERY DOOR, AND SNAP
THE BATTERY DOOR ONTO THE HOUSING AS SHOWN.
15. ATTACH DECAL TO THE BASE
FCC LD.
DECAL \\
8-10339 \
BASE
C—09961 ‘
REMOVE THE ADHESIVE BACKING FROM THE DECAL, AND APPLY THE DECAL
TO THE BASE AS SHOWN

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.2
Linearized                      : No
Creator                         : 
Create Date                     : Friday, February 26, 1999 8:58:27 AM
Title                           : Unknown
Author                          : rbedell
Producer                        : Acrobat PDFWriter 3.0 for Windows
Subject                         : 
Modify Date                     : 1999:02:26 09:07:08
Page Count                      : 9

EXIF Metadata provided by EXIF.tools