PAC C2R VW User Manual To The 8eb0ecb3 9bcd 4a5a 943a E615b2ad5528

User Manual: PAC C2R-VW to the manual

Open the PDF directly: View PDF PDF.
Page Count: 1

DownloadPAC C2R-VW User Manual  To The 8eb0ecb3-9bcd-4a5a-943a-e615b2ad5528
Open PDF In BrowserView PDF
C2R-VW

Radio Replacement interface for Volkswagen

Use for Aftermarket Navigation radios that require Vehicle
Speed Sense, Reverse, Parking Brake and Illumination inputs.
VPW

Arbitration

Class 2

J1850

1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0

Class 2

J1850

EOD

CRC

111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0

Class 2
1 0 0 0 111 0 1111 0 0 1 0 0 11 0 11 0 0

J1850

Class 2

111 0 1 0 0 0 0 11 0 11 0 111 0 0 11 0 0

* 2002-2005 VW vehicles do not have a reverse or parking brake signal on the CAN-Bus. The Green and Red/White wires do not
function for these model year vehicles. Parking brake and reverse signal wires can be found with a volt meter in the vehicles factory
wiring. Vehicle must have a factory installed double din headunit (4” tall).

16 pin

Blue/White = Vehicle Year Select
Black/White = N/A
Green = Reverse output (2005.5-2007)
Orange/White = Parking Light output
Violet/ White = Vehicle Speed Sense (VSS) output
Red/White = Parking Brake output (2005.5-2007)

4

3

2

1

Yellow = +12v Constant
Black = ground
Gray = Right Front (+)
Gray/Black = Right Front (-)
White = Left Front (+)
White/Black = Left Front (-)
Violet = Right Rear (+)
Violet/Black = Right Rear (-)
Green = Left Rear (+)
Green/Black = Left Rear (-)

11 10 9 8 7 6

5

6 pin

Accessory Output
+12volts 1amp max.

#1

Red = +12v Accessory output

Pacific

VW Radio R
2

11 pin
1 amp
fuse holder

#2

To optional SWI-CAN interface for retaining steering wheel audio controls

Installation:

1. Connect the aftermarket radio’s front and rear speaker wires to the 16 pin plug.
3. The 16 pin harness has a yellow and a black wire. Connect the yellow to the radio’s +12v constant wire and the black to the
radio’s ground wire.
4. The accessory wire is located on the 6 pin harness - connect this wire to the radio’s accessory wire. The accessory wire
supplies +12v, 1 amp max, when key is in the accessory or Ignition position. If more current is needed refer to Fig. 1.
5. 11 pin plug:
1. Blue/White - For 2002-2005, Connect this wire to the Battery 12v source. For 2005.5-2007, Insulate and DO NOT USE!
2. Black/White - N/A.
Fig. 1
High Current 12v
(using a SPDT relay)
(Fused)
3. Green - Connect this wire to the radio’s Reverse input wire only.
4. Orange/White - Connect this wire to the radio’s Illumination input wire only.
85
86
87
12v Acc.
5. Violet/White - Connect this wire to the radio’s VSS input wire only.
Ground
From
87a
Interface
6. Red/White - Connect this wire to the radio’s Parking brake input wire only.
30
Note: Do not connect these wires to any other circuit besides the radio’s wire harness.
Diode 1N4005
or equivelant

6. When all connections are made, connect the 16 pin plug into the vehicle’s 16 pin harness.
7. Refer to the radio’s manual for testing VSS, Reverse, Parking Brake and Illumination inputs (if used).

New High
Current Output

DISCLAIMER: Under no circumstances shall the manufacturer or the distributors of the C2R-VW parts be held liable for consequential damages sustained in connection with the C2R-VW. The manufacture and it’s distributors will not, nor will they authorize any representative or any other individual to
assume obligation or liability in relation to the C2R-VW other than its replacement.
10-07-09

Pacific Accessory Corporation - Santa Ana, CA 92705
Tech Support 866-931-8021 • www.pac-audio.com



Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.4
Linearized                      : Yes
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 4.0-c006 1.236519, Wed Jun 14 2006 08:31:24
Create Date                     : 2009:10:07 15:24:27-04:00
Modify Date                     : 2009:10:07 15:24:28-04:00
Metadata Date                   : 2009:10:07 15:24:28-04:00
Creator Tool                    : Adobe InDesign CS3 (5.0)
Thumbnail Format                : JPEG
Thumbnail Width                 : 256
Thumbnail Height                : 256
Thumbnail Image                 : (Binary data 12542 bytes, use -b option to extract)
Version ID                      : 1
Instance ID                     : uuid:520713d8-7747-4e39-8a46-b9abaa448c3a
Document ID                     : adobe:docid:indd:05b8509c-2b44-11dc-9139-9b079c0e7d53
Rendition Class                 : proof:pdf
Derived From Instance ID        : 05b8509b-2b44-11dc-9139-9b079c0e7d53
Derived From Document ID        : adobe:docid:indd:05b85099-2b44-11dc-9139-9b079c0e7d53
Derived From Version ID         : 1
Manifest Link Form              : ReferenceStream, ReferenceStream, ReferenceStream
Manifest Placed X Resolution    : 72.00, 72.00, 72.00
Manifest Placed Y Resolution    : 72.00, 72.00, 72.00
Manifest Placed Resolution Unit : Inches, Inches, Inches
Manifest Reference Instance ID  : uuid:a97185b5-7651-4eb9-95ea-d76168df402d, uuid:DA4332E056E1DB119CDBC746224C7687, uuid:211d8e8d-9cfa-462d-8e52-e45db11ffac5
Manifest Reference Document ID  : uuid:019276B3132BDC1185F1E6C6D60CC4AF, uuid:D94332E056E1DB119CDBC746224C7687, uuid:D54DB0EFC4E6DB1194B8BA631A506A09
Format                          : application/pdf
Producer                        : Adobe PDF Library 8.0
Trapped                         : False
Page Count                      : 1
Creator                         : Adobe InDesign CS3 (5.0)
EXIF Metadata provided by EXIF.tools

Navigation menu