PAKITE TECHNOLOGY HDWIFIRX Wireless HDMI Extender User Manual

Download:
Mirror Download [FCC.gov]
Document ID	4101865
Application ID	yoKOacu7s49ka1pXdKjouQ==
Document Description	User Manual
Short Term Confidential	No
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	65.33kB (816668 bits)
Date Submitted	2018-12-11 00:00:00
Date Available	2018-12-11 00:00:00
Creation Date	2018-12-06 17:18:14
Producing Software	Microsoft® Word 2010
Document Lastmod	2018-12-06 17:18:14
Document Title	PAT-590-HDMI高清影音无线传输器-英文说明书-20180831-世胜专用版.cdr
Document Creator	Microsoft® Word 2010
Document Author:	Administrator

Wireless HDMI Extender
Wireless IR Remote Extender
5.2G Dual-Band Series
Waste electrical products
should not be disposed of household
wants. Please put them to the recyle
facilities.
Check with your local authority or
retailer for recycling advice!
User Manual
VEN1.1
HDMI EXTENDER
HDMI EXTENDER
This product is applicable to the product model:
PAT-580 / PAT-583 / PAT-585 / PAT-587 / PAT-590 / PAT-593 / PAT-595 / PAT-597
Notes on Safety Operations
Equipment working frequency band:
Do not disassemble
802.11n40: 5150MHz ~ 5250MHz
Software: N/A
Do not use products in the presence of flammable gases
Do not immerse in or contact with water, or wet by rain
Turn off immediately in the event of malfunction
Turn off the power immediately when a fault occurs
Fireware: 2018-8-20
HDMI EXTENDER
HDMI EXTENDER
This device is restricted to indoor use where operated in the USA using frequency in 5150MHz ~ 5250MHz
Labelling requirements:
Information to the user:
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Information to user:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
HDMI EXTENDER
HDMI EXTENDER
I. Product Description - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
1. Function & Features - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
The copyright of this manual belongs to the manufacturer.
Esteemed Customers:
Thank you for purchasing our product!
Please do read this guide book carefully and thoroughly for better
use of this product. It works for home use. Every check of this product
(if it works normally) before uses it is necessary. If there any default or
damage of this product, please maintain or repair it in time.
This final explanation of the content written in this manual book belongs
to its manufacturer. Anyone or any party is not allowed to copy all or
partial content of this Manual Book. It is not authorized to anyone or
any party. No notifications would be given, if any change of this Manual
2. Standard accessories - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2
3. Specifications ------------------------------------------------------------------------------------- 3
II. Hardware and Installation Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - 4
Transmitter panel description ----------------------------------------------------------------- 4
2. Receiver panel description--------------------------------------------------------------------- 4
3. Transmitter installation -------------------------------------------------------------------------- 5
4. Receiver installation ----------------------------------------------------------------------------- 6
III. Operation ---------------------------------------------------------------------------------------- 7
Book.
1.
1. Power switch -------------------------------------------------------------------------------------- 7
2. 5.2GHz channel selection ---------------------------------------------------------------------- 7
IV. Common Problems and Troubleshooting -----------------------------------------------11
V. Warranty Service --------------------------------------------------------------------------------- 13
HDMI EXTENDER
I. Product Description
Thanks for buying our products along with the global users. The Wireless HDMI Extender is a kind of wireless
electronic product which can realize the audio video signal sharing in different rooms for family entertainment.
It consists of a transmitter and a receiver. Adopting smart 5.2GHz dual-band WIFI Wireless transmission
schemes and having advantages of long transmission distance, no splash, no snow, strong anti-interference
and high mobility, etc. By means of radio waves, it can transmit the signal from DVD, DVR, CCTV camera,
IPTV, Satellite receiver, Digital TV Set Top Box or any other AV devices at transmitter end to TV sets in
different room at receiver end.it can support the IR remote control at the receiver end to realize the function of
wireless control of devices from another place. So that you can enjoy freely wireless HD AV sharing data and
Hi-Fi audio and video effect.
1. Function & Features
n The product consists of transmitter and receiver and can wireless transmit HDMI high-definition signals to
receiver end.
n The transmitter supports one HDMI signal input, and one HDMI signal output enables the signal terminal
to watch video simultaneously.
n HDMI resolution: 720P~1080P@50/60Hz, SVGA~WUXGA a variety of commonly used computer resolution.
n Adopt international 5.2G wireless dual-band transmission signal, faster transmission speed, stronger anti-
interference.
n Adopt external dual-gain antenna, ultra-long transmission distance, can up to 50-100 meters in open
space (the distance may be affected by the environment).
HDMI EXTENDER
n Support IR Remote controller to long range extend, can remote control signal source equipment at
the receiver.
n Pure hardware mode, plug then use, connect the computer without installing the driver. Support WEB
configuration interface, simple and easy to operate.
n Support DVD, DVR, IPTV, CCTV camera, Satellite receiver, Digital STB and audio and video output
device, and can use IR remote to control DVD, DVR, IPTV, Digital STB and other devices.
n Resolution is 1080P@60Hz and downward compatible with audio and video transmission, the wireless
receiving image is clear and stable, colorful and high sound quality without noise.
n Easy to install, small size, exquisite fashion, Machine dimensions:158x128x37mm.
n The wireless module are FCC and CE certificated. Wireless application is safe and reliable.
2. Standard accessories
Transmitter - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 set
Receiver - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 set
Power Adaptor - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 pcs
HDMI Cable - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 2 pcs
IR Extender Cable
User Manual
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 pcs
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1 copy
HDMI EXTENDER
HDMI EXTENDER
HDMI EXTENDER
3. Specifications
HDMI EXTENDER
II.Hardware and Installation Instructions
Input/Output Jack
HDMI1.4/HDCP1.4
Output Image Resolution
720/1080P@50/60Hz
HDMI Audio Format
1080P HQ
HDMI Max Transmission Rate
6.75Gbps
Wireless Transmission Standard
IEEE 802.11n40
Operating Frequency
5150MHz ~ 5250MHz
1. Transmitter panel description
5.2G
5.2G
Reset Button
Max wireless transmission rate
Wireless transmitter power (IPEX)
Antenna
IR Signal
Transmitter
5G 300Mbps
TX：22.67dBm,RX:22.27 dBm
Transmission
Indicator
50-100m(open space accessibility)
IR Frequency Range
38KHz
DC Input
AC 100V-240V 50/60Hz
DC Output
DC 5V/2A
HDMI-IN
Power
Indicator
Power Input
HDMI Signal Output
2. Receiver panel description
Operation Humidity
10-80%RH(Non-condensing)
Product Dimension
158x128x37mm
5.2G
Reset Button
Antenna
-10 ~ +50°C
DC-IN
HDMI Signal Input
5.2G
Operating Temperature
Antenna
IR Extension
Interface
Video Indicator
Transmission Distance
Power Switch
Power Switch
IR Receiver
Transmission
Indicator
Video Indicator
HDMI-OUT
Power
Indicator
HDMI Signal Output
DC-IN
Power Input
Antenna
HDMI EXTENDER
HDMI EXTENDER
3. Transmitter installation
4. Receiver installation
n Put the transmitter near to STB and other signal source device, connecting the STB HDMI output with the
n Put the receiver near to TV set which needs to be watched, connect the TV HDMI input with the receiver
transmitter HDMI input, then connecting the transmitter HDMI output with the television HDMI input.
HDMI output. Modulate TV channel to HDMI video channel to display the video.
n Put the transmitter above the STB or other device so that the IR transmitting window bulge out by 1 to 2 cm
and vertically aims at the receiving window of the IR signal of the IR signal of the STB or other device.
Transmitter
Receiver
STB/DVD
STB/DVD
TV
HDMI Signal Output
Back View
Side View
HDMI Signal
Bulge out of STB
should be 1-2cm
Hints：
Hints：
The receiving window of the IR signal of the STB or other device is generally marked with “IR”. Please
vertically aim at the IR signal transmitting window of the transmitter. And keep the transmitter away from other
devices and metal devices to avoid effecting wireless signal transmitter.
After receiver connects the TV sets, you should change from TV to AV channels and keep the receiver away
from other devices and metal devices to avoid effecting wireless signal reception.
HDMI EXTENDER
B. Open the WIFI WLAN for configuring the phone/computer, search for the name SSID: HDMI Extender
WIFI network, the default password: 12345678.
III. Operation
1. Power switch
Pressing the power switch
transmit the signal or close.
HDMI EXTENDER
can switch on or off the power to the transmitter or receiver and enable it to
Note: The factory default configuration is 5G WIFI signal, if the device cannot be found: HDMI Extender WIFI
network, please configure it with a smart phone firstly and change
C. Open the browser, enter the IP address: 192.168.1.8 and then click the Enter button to display the
following interface.
Hints：
To ensure that the product can be used normally, the product should be connected when power off in case the
product be damaged. Switch on when finish connection and never plug in or out at will. Please turn off the
product if long time not use it.
2. 5.2GHz channel selection
In order to prevent mutual interference between devices on the same frequency, this product supports setting
the working frequency band, transmission channel, and device name SSID (customizable name SSID) of the
product through the device background WEB. In order to ensure that the content you are viewing is securely
transmitted on the device, please log in to the WEB setting interface through your mobile phone or laptop
before the first use, and change the name SSID and password. The specific steps are as follows:
Modify
Login
A. Connect the power adapter to power the transmitter and receiver and turn on the switch.
HDMI EXTENDER
HDMI EXTENDER
D. Enter the default login password: admin, click [Login] to enter the configuration interface, if you need to
modify the login password, please click [Modify]. After modifying the relevant parameters, click [save] to save
and exit, and click [reset] to restore the factory settings.
E. If you accidentally forget the login password, you can also restore the factory settings through hardware
operation. The method of operation is as follows:
5.2G
Select transmission frequency
Wireless Band:
Under power-on status, press the REST button on the back of the transmitter and receiver to reset. After
pressing the reset button, the black screen on the TV screen indicates a successful factory reset.
Channel:
Name(SSID):
Modify product name
Change login password
PSK Password:
HDMI Extender
12345678
reset
save
Wireless Band:
Select frequency channel
NOTE
5.2G
Channel:
Name(SSID):
After changing the product name and password, or if the REST product needs to be powered off and
restarted, the WIFI network name of the product can be found.
PAKITE-AV-Sender
Both the transmitter and receiver can
be reconnected after a hardware
reset at the same time.
PSK Password:
save
reset
10
HDMI EXTENDER
IV. Common problems and troubleshooting
Before powering on, you should carefully check whether the cable is normal and must ensure that all
interfaces are connected correctly.
1. There is no picture and audio
A. Check whether the receiver power supply is normal.
HDMI EXTENDER
4. Transmission distance close
A. Inadequate transmission signal, adjust the angle of the antenna or shorten the distance of devices.
B. Adjust the placement and height of transmitter and receiver to enhance wireless signal transmission.
C. Brick walls, metal doors, and concrete walls cause wireless signal attenuation to affect the transmission
distance.
D. Interference that caused by the same frequency, adjust the transmission frequency or frequency channel,
avoid the interference frequency.
B. Confirm that the TV input channel is correct.
C. Check if the HDMI cable is damaged.
5. The image is interfered
A. Inadequate signal transmission, adjust the angle of the antenna or shorten the distance of devices.
2. Showing Connecting
B. Adjust the placement and height of transmitter and receiver to enhance wireless signal transmission.
A. Check the transmitter power supply is normal.
C. Interference that caused by the same frequency, adjust the wireless frequency or frequency channel to
avoid the interference frequency.
B. Check whether the WEB settings are correct.
C. Press the product reset button or power off to restart the product.
D. Cause interference with the same frequency, adjust the transmission frequency or frequency channel,
avoid the interference frequency.
6. Unable to log in the web settings interface
A. Verify the transmitter and receiver are powered on and connected successfully.
B. Check whether the IP address configured on the device is set to the static IP type.
3. Receive display No signal
A. Check the signal source HDMI output signal is normal.
B. Confirm the output resolution of the signal source is within the support range.
C. Check whether the IP address configured on the device is set to 192.168.1.XXX.
D. Try to replace the browser with a different browser and log in to the Wed Settings screen. Adjust the
wireless frequency or frequency channel to avoid the interference frequency.
C. Make sure the source is connected to the transmitter's HDMI input.
11
12
HDMI EXTENDER
7. IR wireless return function is insensitive
HDMI EXTENDER
1. Warranty is only available to customers who buy this product through legal approach.
A. Adjust the placement and height of the transmitter and receiver to enhance wireless signal transmission.
B. Transmitter have IR signal transmission function, such as the transmitter placed on the "top box" above,
check whether the transmitter bulging "set-top box" 1-2cm.
C. Transmitter have IR signal transmission function, such as using the external IR Extention cable. Try to
keep the transmitter away from the "set-top box" and avoid sending infrared signals at the same time to
cause remote control conflicts.
2. After-sales promise:
Every customer designated dealers to buy products in our company, if there is product quality problems under
the normal use within 3months from the day you buy the machine, user can bring the valid credentials or
sales invoice to the original dealer where you bought it to replace the same model of the products. If there
are product quality problems within 12months,you can request free warranty(not including common
accessories).
3. Additional fee will be charged in any of the following situations:
V. Warranty Service
A. The warranty period is expired.
B. Failure of damage caused by connecting other device.
C. Failure or damage caused by repairing or transforming by yourself.
D. Failure or damage caused by not following the operation instructions of the product.
E. Failure or damage caused by collision, falling or other non-quality problems.
F. Damage caused by fire, lighting strike or other unexpected disasters.
Switch on only after the connection and never plug in or out at will.
The product is for home use instead of professional industrial use.
Please don’t take apart without proper professional knowledge.
For repairing products which are damaged by the above situations, users should bear the fee of replacement
of the damaged components as well as the shipping fee.
Solemn Statement:
The manufacturer assumes no liability for irreversible damages to other devices caused by these situations!
13
14

---

Source Exif Data:

File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 12
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : PAT-590-HDMI高清影音无线传输器-英文说明书-20180831-世胜专用版.cdr
Author                          : Administrator
Creator                         : Microsoft® Word 2010
Create Date                     : 2018:12:06 17:18:14+08:00
Modify Date                     : 2018:12:06 17:18:14+08:00
Producer                        : Microsoft® Word 2010

EXIF Metadata provided by EXIF.tools