PANASONIC Components Manual 98060102
User Manual: PANASONIC PANASONIC Components Manual PANASONIC Components Owner's Manual, PANASONIC Components installation guides
Open the PDF directly: View PDF 
.
Page Count: 6
ISTEP1
Stack the components as shown below.
1
,Tuner
Amplifier
Graphic equalizer
Casse_e deck
CD changer
i
Before connecting each unit, check and identify the supplied
accessories comparing to the illustrations at the top of each
step (steps 2--5).
RQC_,A0522
H1096G0
I
STEP 25
(6 pcs.)
When these terminals are
not in use, be sure to insert
the "shorting" pins.
Shorting pins
STEP 3D %
: : Tape
..... J
Wall or
audio
rack
Amplifier
® ®
STEP 4
Included with the
front speakers (2 pcs.)
Included with the
center speaker (1 pc.)
D
Included with the
surround speak#rs
(2 pcs.)
Fj
How to place speakers
The Dolby Pro-Logic effect is best enjoyed when you
are seated as shown in figure below.
Front speaker !1 Center speaker Front speaker
(Left) __ (Right)_
r__-- Best listening
I I p°siti°n
Surround speaker I ] Surround speaker
(Left) [] I,, vJ (Right) []
0
Front speakers
SURROUND CENTER FRONT
ACIN'_,
(left)
[]
I Amplifier
(right) [] (left) []
Surround speakers
[] Center speaker
J[_PJ_ When connecting the speaker cables, be sure to only connect I
positive (Jr-) wires to positive (Jr) terminals, and negative (--) wires Ito negative (--) terminals.
Do not connect the surround speakers to the
front speaker terminals. The surround speakers
may be damaged if connected to the front
terminals due to the output power difference
between the front and surround terminals.
0
(_ For amplifier For speaker
STEP 5D
Long thick (2 pcs.)
%
Short thin (3 pcs.)
Short thin ]
Short thin I
Connect this cord after
all other cables and
are connected.
Household AC outlets
(AC 120 V/60 Hz)
ILong thick l
S
Check the installationby tuning in the radiofirst
The explanationbelowis an exampleof operationinthecase wherethefrontspeakersare beingusedfor
checkng..Ifthecenterspeakerand/orsurroundspeakersare beingusedto enjoythe DolbyPro Logicsystemor
SFC function, refer to pages38-41 of theoperatinginstructions.
....
Press POWER.
Press SI_EAKERS.
"SPEAKERS"willilluminate,
3
Ifthe "TAPE MONITOR"
indicatoris illuminated,
pressthisbuttonto turn
the indicatoroff.
Press BAND
to select "FM" or "AIVI". Turn
VOLUME to
adjust the
volume level.
Press TUNER.
Press DOWN or
UP to tune to the
desired broadcast.
If eitherbuttonis pressed
and helddown,the
broadcaststationscan be
tunedautomatically.
• If no sound is heard from speakers, please recheck all connections from step 2 to 5.
• When the unit is not used, turn thepower off.
When left unused for long period of time the unit should be unplugged from the household AC outlet.
Other _I_-]
accessories
For the method of inserting the batteries, please refer to "Concerning the remote control"
in the Operating Instructions.
