PANASONIC DVD/VCR Combo Manual L0208212

User Manual: PANASONIC PANASONIC DVD/VCR Combo Manual PANASONIC DVD/VCR Combo Owner's Manual, PANASONIC DVD/VCR Combo installation guides

Open the PDF directly: View PDF .
Page Count: 60

_OUBL£FEATURE" Panasonic

nmnlvIBIon [_

Model No.

DVD/VCR DECK

Operating Instructions

PV-D4742/PV-D4752

[ Connections and Initial Setup Procedures are on pages 12 to 17. ]

oo °o,oY

D I G I T A L vI D E O PL_ "_#'B_K

mSnALAUn,0 (PV-D4752 only)

As an ENERGY STAR_ Partner, Matsushita Electric Corporation ofAmerica has determined that this product or product model meets the

ENERGY STAR_ guidelines for energy efficiency.

Please read these instructions carefully before attempting to connect, operate or

adjust this product. Please save this manual.

Spanish Quick Use Guide is included.

(Gu{a para rapida consulta en espa5ol esta incluida.) LSQT0580A

Important Safeguards and Precautions

OUTDOOR ANTENNA INSTALLATION I

SAFE ANTENNA AND CABLE CONNECTION

If an outside antenna or cable system is connected to the

FOR YOUR SAFETY, READ AND RETAIN ALL SAFETY

AND OPERATING INSTRUCTIONS. HEED ALL

WARN NGS NTHE MANUAL AND ON THE UN T

I INSTALLATION I

1 POWER SOURCE CAUTION

Operate only from a power source indicated on the

unit or in this manual. If necessary, have your

Electric Utility Service Company or Video Products

Dealer verify the power source in your home.

2 POLARIZED OR GROUNDING PLUG

As a safety feature, this product comes with either

a polarized power cord plug (one blade is wider

than the other), or a three-wire grounding type plug.

POLARIZED PLUG CAUTION:

This plug will only fit into an outlet one way. If you cannot

fully insert the plug, try reversing it. If it still will not fit,

have an electrician install the proper wall outlet. Do not

defeat the safety feature by tampering with the plug.

GROUNDING PLUG CAUTION:

This plug will only fit into a three-hole grounding

outlet. If necessary, have an electrician install the

proper outlet. Do not defeat the safety feature by

tampering with the plug.

3 POWER CORD

Make sure power cords are routed so that they

are not likely to have anything rest on them, roll

over them, or be in the way of walking traffic.

If an extension cord is used, make sure it also

has either a polarized or grounded plug and that

the cords can be securely connected.

Frayed cords, damaged plugs, and damaged or

cracked wire insulation are hazardous and should

be replaced by a qualified service technician.

Overloaded outlets and extension cords are fire

hazards and should be avoided.

4 DO NOT BLOCK VENTILATION HOLES

Ventilation openings in the cabinet release heat

generated during operation. If they are blocked,

heat build-up inside the unit can cause failures that

may result in a fire hazard or heat damage to

cassettes or discs.

For protection, follow these rules:

a. Never cover ventilation slots or the unit while in

use, or operate the unit when placed on a bed,

sofa, rug, or other soft surface.

b. Avoid built-in installation, such as a book case

or rack, unless proper ventilation is provided.

5 PLACEMENT: AVOID EXTREMELY HOT LOCATIONS

OR SUDDEN TEMPERATURE CHANGES

Do not place the unit over or near heater or

radiator, in direct sunlight, inside closed vehicles,

in high temperature [over 104°F (40°C)], or in over

75% humidity. If the unit is suddenly moved from

a cold place to a warm one, moisture may

condense in the unit and on the tape causing

damage. Never subject the unit to vibration,

impact, or place it so that the surface is titled as

internal parts may be seriously damaged.

6 TO AVOID PERSONAL INJURY

• Do not place unsecured equipment on a sloping

surface.

• Do not place this unit on any support that is not

firm, level, and adequately strong ,_,_

The unit could fall causing serious

injury to a child or adult and

damage to the unit.

• An appliance and cart

combination should be moved

with care. Quick stops,

excessive force, and uneven

surfaces may cause the appliance and cart

combination to overturn.

• Carefully follow all operating instructions and

use the manufacturer's recommended

accessories when operating this unit or

connecting it to any other equipment.

equipment, be sure the antenna or cable system is grounded

so as to provide some protection against built up static

charges and voltage surges. ,o__,_ ..... -_

Section 810 of the National Electrical _#,"_

Code, ANSI/NFPA 70 (in Canada, /_,\//'/'/'/'/'/'/'/'/_

part 1 of the Canadian Electrical _ _'_,_

Code) provides information I_J(_'/I _'°_;_°'

with respect to proper grounding L_ '_-L-._ _°_'°_

of the mast and supporting ,,,__ ......

structure, grounding of the lead-in wire -_°°

to an antenna discharge unit, size of grounding conductors,

location of antenna discharge unit, connection to grounding

electrodes and requirements for the grounding electrode.

2 KEEPANTENNACLEAR OFHIGH VOLTAGEPOWERUNES OR CIRCUITS

An outside antenna system should be located welt away from

power lines, electric light or power circuits and where it will never

come into contact with these power sources if it should happen

to fall. When installing an outside antenna, extreme care should

be taken to avoid touching power lines, circuits or other power

sources as this could be fatal. Because of the hazards involved,

antenna installation should be left to a professional.

I USING THE UNIT I

If the unit has been in storage or moved to a new location,

refer first to the INSTALLATION section of these safeguards.

1 KEEP THE UNIT AWAY FROM WATER OR MOISTURE OF ANY KIND.

2 IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR

STRONG IMPACT, unplug the unit and have it inspected by a

qualified service technician before use.

3 DURING AN ELECTRICAL STORM

During a lightning storm, whether indoors or outdoors, or

before leaving the unit unused for extended periods of time,

disconnect all equipment from the power source as well as

the antenna and cable system.

4 WHEN THE UNIT IS PLUGGED IN

•Never expose the unit to rain or water. DO NOT OPERATE

if liquid has been spilled into the unit. Immediately unplug

the unit, and have it inspected by a service technician.

Fire and shock hazards can result from electrical shorts

caused by liquid contact inside.

• Never drop or push any object through openings in the unit.

Some internal parts carry hazardous voltages and contact

can cause electric shock or fire hazard.

Do not put any foreign object on the disc tray.

• Avoid placing the unit directly above or below your TV set

as this may cause electrical interference. Keep all magnets

away from electronic equipment.

5 USING ACCESSORIES

Use only accessories recommended by the manufacturer to

avoid risk of fire, shock, or other hazards.

6 CLEANING THE UNIT

Unplug the unit. Then, use a clean, dry, chemically untreated

cloth to gently remove dust or debris. DO NOT USE cleaning

fluids, aerosols, or forced air that could over-spray, or seep

into the unit and cause electrical shock. Any substance such

as wax, adhesive tape, etc. may mar the cabinet surface.

Exposure to greasy, humid, or dusty areas may adversely

affect internal parts.

ISERVICE I

1DO NOT SERVICE THIS PRODUCT YOURSELF

If, after carefully following the detailed operating

instructions, this product does not operate properly, do not

attempt to open or remove covers, or make any

adjustments not described in the manual. Unplug the unit

and contact a qualified service technician.

2 IF REPLACEMENT PARTS ARE REQUIRED

Make sure the service technician uses only parts specified

by the manufacturer, or those having the same safety

characteristics as the odginal parts. The use of unauthorized

substitutes may result in fire, electric shock, or other hazards.

3 HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY CHECK

After any service or repairs to the unit, request the service

technician to conduct a thorough safety check as

described in the manufacture's service literature to ensure

that the unit is in safe operating condition.

Safety Precautions/Mesures de sdcuritd

WARNING: To prevent fire or shock hazard, do not expose this

equipment to rain or moisture,

CAUTION: To prevent electric shock, match

wide slot, fully insert,

Avertissement: Afin de prdvenir tout risque

dlectriques, ne pas exposer

une humiditd excessive,

Attention: Pour dviter les chocs dlectriques, introduire la lame la

plus large de la fiche dans la borne correspondante de la

prise et pousser jusqu'au fond,

CAUTION: TO REDUCE THE RISKOF ELECTRIC SHOC_

DO NOT REMOVE COVER (OR BACK)

NO USER_SERVICEABLE PARTS INSIDE

REFER SERV_CING TO QUALIFIED SERVICE PERSONNE

wide blade of plug to

d'incendie ou de chocs

cet appareil &la pluie ou

/_ This symbol warns the user that uninsulated voltage

within the unit may have sufficient magnitude to cause

electric shock.

Therefore, it is dangerous to make any kind of contact

• ' with any inside part of this unit.

/_ This symbol alerts the user that important literature

concerning the operation and maintenance of this unit

has been included. Therefore, it should be read

carefully in order to avoid any problems.

"CAUTION:

UNIT IS A CLASS I LASER PRODUCT.

HOWEVER THIS UNIT USES A VISIBLE LASER BEAM WHICH COULD

CAUSE HAZARDOUS RADIATION EXPOSURE IF DIRECTED.

BE SURE TO OPERATE THE UNIT CORRECTLY INSTRUCTED.

WHEN THIS UNIT IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE

YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER

OPENINGS TO LOOK INTO THE INSIDE OF THIS UNIT.

USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF

PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT lik

HAZARDOUS RADIATION EXPOSURE.

DO NOT OPEN COVERS AND DO NOT ATTEMPT TO REPAIR YOURSELF.

REFER SERVICING TO QUALIFIED PERSONNEL.

CAUTION:

LASER RADIATION

WHEN OPEN DO NO1

STARE INTO BEAM. •

ATTENTION:

RAYONNEMENT

LASER EN CAS

D'OUVERTURE.

NE PAS REGARDER

DANS LE FAISCEAU.

(Inside of product)

FCC NOTE:

This equipment has been tested and found to comply with part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when operated in a residential

environment. If this equipment does cause interference to radio or television reception, which can be

determined by turning the equipment off and on, use the equipment in another location and/or utilize

an electrical outlet different from that used by the receiver.

If necessary, consult the dealer or an experienced radio/TV technician for help. The user may find the

booklet, "Something About Interference" available from FCC local regional offices helpful.

FCC Caution:

To assure continued compliance, (example- use only shielded interface cables when connecting to

other devices.) Any changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate this equipment.

Ipparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, and 4,819,098, licensed for limited

viewing uses only.

FCC Warning: Any unauthorized changes or modifications to this equipment would void the user's

authority to operate.

Region Management Information:

This DECK is designed and manufactured to respond to the

Region Management Information that is recorded on a DVD

disc. If the Region number described on the DVD disc does

not correspond to the Region number of this DECK, this

DECK cannot play this disc.

The Region number

for this DECK is 1.

Congratulations

on your purchase of one of the most

sophisticated and reliable products on the

market today. Used properly, it will bring you

years of enjoyment. Please fill in the

information below. The serial number is on the

tag located on the back of your DECK.

• Date of Purchase

• Dealer Purchased From

• Dealer Address

• Dealer Phone No.

• Model No.

• Serial No.

[] Remote Control [] Batteries 2 "AA"

LSSQ0333 (PV-D4742)

LSSQ0344 (PV-D4752)

[] RF Coaxial Cable

VJAS0196

To order accessories, call toll free

1-800-332-5368.

1) Open cover.

2) Insert

L__ batteries as

marked.

3) Close cover.

[] Battery replacement caution

•Do not mix old and new batteries.

• Do not mix alkaline with manganese

batteries.

Disc formats supported by this DECK

DECK can play back discs bearing any of the

following marks:

DVD

..... - 3" (8 cm) disc /5" (12 cm) disc

_D=_ Video CD

3" (8 cm) disc /5" (12 cm) disc

•_w, 3" (8 cm) disc /5" (12 cm) disc

Discs which cannot be played

• DVD with Region No. other than "1" or "ALl"

• DVD of PAL system • DVD-R/DVD-RAM

• DVD-ROM • CD-ROM

• CDV • CD-G

Do not try to play Photo CD.

is a registered trademark.

vloEo

Handling precautions

• Only hold disc by edges as shown below.

Fingerprints, dirt and scratches can cause

skipping and distortion.

• Do not write on label side of disc.

• Never use record cleaning sprays, benzine,

thinner, static electricity prevention liquids, or any

other solvent.

• Be careful not to drop or bend disc.

• Do not place more than

1 disc on disc tray.

• Do not try to close

disc tray when disc

is not properly placed.

• Always store discs in

their proper cases

when not in use.

Disc tray

Disc

To clean disc surface

With a soft, damp (water only) cloth, gently wipe

from the center hole to the outer edge as shown

below. (Wiping in a circular pattern will scratch the

surface.) O X

If disc is brought from a cold to a warm

environment, moisture may form on the disc

Wipe away moisture with a soft, dry, lint-free cloth

before using disc. (See above.)

Improper disc storage

Discs could be damaged if stored or left in areas:

• exposed to direct sunlight.

• that are humid or dusty.

• near heat (i.e. heater, radiator, etc.).

Important Safeguards and Precautions ............................ 2, 3

Before Using ............................................................................ 4

DECK & Cassette Information ........................................... 6,7

Location of Controls ....................................................... 8 ~ 10

Displays (On Screen Displays and Multi Function Display) .................... 11

Connections .................................................................. 12 ~15

Initial Setup for Basic Connections (Ready to Play) .......... 16, 17

Reset Language, Channels, Clock, VCR's Output Channel ... 18, 19

Playback/Record on a Tape ........................................... 20, 21

Basic DVD Operation ...................................................... 22, 23

Timer Recording .............................................................. 24, 25

MTS Broadcast/VHS Hi-Fi Stereo System .................... 26, 27

Multi-Brand Control Feature ........................................... 28, 29

Tape Operation (Search System) ....................................... 30 ~32

Special VCR Features ..................................................... 33, 34

Copying Your Tapes (Dubbing)......................................................... 35

Disc Operation ............................................................... 36 ~40

DVD Operation using On-Screen Displays ................. 41 ~42

MP3 Playback Operation ....................................................... 43

DVD Lock Feature ................................................................. 44

Settings for DVD Operation .......................................... 45 ~47

Language Code List .............................................................. 48

Warning and Instruction Displays ........................................ 49

Before Requesting Service ............................................. 50, 51

Servicenter List ...................................................................... 52

Limited Warranty ................................................................... 53

Spanish (Espahol) Quick Use Guide ............................ 54 ~59

Index ....................................................................... Back Cover

Playing older or damaged tapes may eventually

cause video heads to become clogged.

Video Head Clog Sensor

During playback, this I

screen appears if VIDEOHEADSMAY

clogging is detected. NEEDCLEANING

PLEASE INSERT HEAD

To remove screen, CLEANINGCASSETTE

press PLAY on the oRREFERTOMANUAL

remote or DECK. END :PLAY

" Use "dry" type head cleaning cassette

only. (Part No. NV-TCL30PT is recommended.)

•Follow cleaning tape instructions carefully.

Excessive use of tape can shorten head life.

• If head clog symptoms persist, contact your

nearest Factory Servicenter or authorized

Servicenter (see p. 52).

Break off the tab to

prevent recording.

Record Tab

Screw

To record again

Cover the hole

with cellophane tape.

A clean video head helps produce a clear

picture.

So, we have equipped your DECK with

a built-in, non-chemical head cleaning system

that helps prevent clogging of the video

heads. Cleaning is performed each time you

load or unload a video cassette.

• This feature is preventative only, If your video

heads are seriously clogged, consider the use

of a chemical non-abrasive head cleaning kit

or take your DECK to a Servicenter.

Only use tapes with the _ mark in this DECK.

Tape Speed

Setting

Standard Play)

(Long Play)

SLP

(SuperLong Play)

Type of Video Cassette

T60 T120 T160

2 Hours

1 Hour 2 Hours 40 Minutes

2 Hours 4 Hours 5 Hours

20 Minutes

3 Hours 6 Hours 8 Hours

Use a soft cloth or dusting attachment of a vacuum cleaner to remove dust from the ventilation holes

on the back sides and bottom of the cabinet. Plastic surfaces are easily scratched and can be

marred by alcohol and various solvents. Avoid excessive use of oil-based furniture polishes since

the materials used in the cabinet will accumulate more dust. We recommend using a non-abrasive,

antistatic cleaner and polisher.

Digital Auto Picture

Automatically controls the video output signal for less noise depending on the tape condition.

Digital Auto Tracking

Continuously analyzes the signal and adjusts for optimum picture quality.

Manual Tracking Control

(to reduce picture noise)

Use during Playback and Slow Motion mode to reduce picture noise.

Press OH (TRACKING) _ on the remote control or on DECK until the picture clears up.

To return to Auto Tracking, press POWER off, then on again a few seconds later.

V-Lock Control (to reduce picture !itter)

In Still mode, OH (TRACKING) _ operate as a V-Lock control.

Power Source:

Power Consumption:

Video Signal:

Video Recording System:

Audio Track:

Tuner:

Broadcast Channels:

CABLE Channels:

Input/Output Terminal:

Input Terminal:

Output Terminal:

Operating Temperature:

Operating Humidity:

Weight:

Dimensions:

Discs Played

(1) DVD-VIDEO Disc

(2) Compact Disc

(CD-DA, VIDEO CD)

Digital Audio Output:

Pickup:

Note:

120VAC, 60 Hz

Power On: Approx. 32 watts, Power Off: Approx. 4 watts

EIA Standard NTSC color

4 rotary heads helical scanning system

1 track (Normal), 2 channel (Hi-Fi Audio Sound)

VHF 2- 13, UHF 14 - 69

Midband A through I (14 - 22), Superband J through W (23 - 36)

Hyperband AA - EEE (37 - 64), Lowband A-5 - A-1 (95 - 99)

Special CABLE channel 5A (01), Ultraband 65 - 94, 100 - 125

Audio/Video Line Input/Output, RF Input/Output

Audio/Video Line Input (Front)

S-VHS Output (DVD only), Component Video Output (DVD only)

Audio Output 2 (L), (R)

5°C - 40 °C (41 °F - 104 °F)

10%-75%

6.9 kg (15.2 Ibs).

430 (W) x 118 (H) x 364 (D) mm

16-15/16" (W) x 4-5/8" (H) x 14-5/16" (D) inch

5" (12 cm) single-sided single-layer

5" (12 cm) single-sided double-layer

5" (12 cm) double-sided double-layer (one layer per side)

3" (8 cm) single-sided single-layer

3" (8 cm) single-sided double-layer

3" (8 cm) double-sided double-layer (one layer per side)

5" (12 cm) disc

3" (8 cm) disc

Digital Optical Connector

Wavelength: 655 nm (DVD), 790 nm (Video CD/CD)

Laser power: CLASS II

• Designs and specifications are subject to change without notice,

Angle: Some DVD discs feature scenes simultaneously shot from different angles.

The ANGLE button can be used to view the scene from different angles.

(ANGLE Indicator lights on DECK when a scene recorded at different

angles is detected.)

Chapter Number: Titles are subdivided into numbered sections. You can quickly search for

a favorite scene using these numbers.

DVD: A high-density optical disc on which high-quality pictures and sound have

been digitally recorded. DVD incorporates new video compression

technology (MPEG II) and high-density recording technology which allow

entire movies to be recorded with incredible playback quality.

Playback Control:With Video CD (version 2.0), scenes or information may be selected for

viewing or listening from an interactive menu that appears on the TV screen.

Subtitles: Written dialogue which appears at the bottom of the screen.

Time Number: The elapsed play time from the start of a disc or title. Use to quickly find

scenes. (May not work with some discs.)

Title Number: For DVD discs with two or more titles, the title is numbered as title 1, title 2, etc.

Track Number: Numbers assigned to tracks on Video CDs and CDs to allow specific tracks

to be quickly located.

Video CD: CD containing picture and sound with same quality level as video tape.

This DECK also supports Video CDs with playback control (version 2.0).

This product incorporates copyright protection technology that is protected by method cla ms of

certain U.S. Patents and other intellectual property rights owned by Macrovision Corporation and

other rights owners. Use of this copyright protection technology must be authorized by Macrovs on

Corporation, and is intended for home and other limited viewing uses only unless otherwise

authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

EJECT/

OPEN/CLOSE

pp. 20, 22

POWER

Bold: VCR Function

Ita/ic: DVD Function

Bold ltalic: VCR and DVD Functions

Normal: Others

DISPLA Y

p. 11, 41

TV mode

p. 28

VCR mode

p. 28

DSS/CABLE mode _

p. 28

PLA Y

pp. 20, 22

REWIND/SEARCH/

SLOW-

pp. 20, 23

VCR/TV /

p. 21

NUMBER keys

RETURN/SEARCH

pp. 22, 30

ACTION

pp. 18, 45

SKIPI'_'

SKIPHI_I

p. 23

p. 38

ANGLE

p. 37

DVD mode

p. 28

INPUT

p. 35

FAST FORWARDISEARCHI

SLOW+

pp. 20, 23

PAUSE/STILL

pp. 20, 23

STOP

pp. 20, 22

ADD/DELETE/CLEAR

pp. 19, 39, 44

SURROUND/ENTE R

pp. 23, 28

PROGRAM

p. 24

SELECT

AV<I_

p. 38

SET

SUB TITLE

p. 36

ZOOM

p. 37

AUDIO (SAP/Hi-Fi)

pp. 27, 36 :>10 --

VOLUME 4-1- L

p. 28

COUNTER

RESET

p. 32

SPEED

p. 21 \\\

FCOMMERCIAL SKIP/

ZERO

pp. 31, 32

EJECT button: When this button is pressed in VCR mode, the tape is ejected.

This button is inoperative if pressed during recording.

If pressed in DVD mode, the disc tray opens or closes.

CHANNEL

TRACKING/V-LOCK

pp. 21, 6

TAPE POSITION/

AUDIO CONTROL

p. 34, 40

RECORD

p. 21

_i1_l_'.Tz1_FzYfi_[i_lF"J_?E1l , .., ." i, ,.,llT"4L_'i_Tir.T.-T..]itt,.xa..]

ili[.]ill LTJ[_v_,l[.l| IH=[_[I

Bold: VCR Function

Italic: DVD Function

Bold Italic: VCR and DVD Functions

Normal: Others

STOP/EJECT

p. 20

FAST FORWARD/SEARCH

p. 20

PLAY

p. 20

REWIND/SEARCH

p. 20

fIf the disc cannot be removed...

First, unplug DECK. Then, prepare a rigid

wire (e.g. an extended paper clip) and,

applying moderate force, insert it straight

into the hole at the base of the tray.

The tray will eject a little. Now, pull the tray

all the way out and remove the disc.

/, , ,

_ Over 2 inches

POWER -- I

Cassette Disc Tray \OPEN/CLOSE

Compartment | \

"_CN2__ _ M Ul_pFp_l_/tion ' //-- RoESSJVE

CHANNEL

TRACKING/V-LOCK

pp. 21, 6

VCR/TV

p. 21

Remote

Sensor PAUSE

p. 23

PLA Y

p. 22

SKIP_H

SKIP I,II_

p. 23

REC STOP

p. 21 p. 22

<Model PV-D4752 DECK shown.> 9

_iNi]_4"-ol N

AC Power Plug

•While plugged into an AC outlet,

this DECK consumes 4 W of

electrical power in off mode.

Bold: VCR Function Italic: DVD Function

Bold Italic: VCR and DVD Functions

VHF/UHF Antenna Output Terminal

p.12

Component Video Output

Connector (Y, PB, PR) (DVD Only)

p. 13

SELECT SW (DVD Only) _

p. 13 "\

VHF/UHF Antenna Input Terminal

p. 12

Video Output Video Input

Connector Connector

p. 12 \p. 35

\\ °\\o0

, , 000000 , -

ovOOT.T .......

,#_ s....... ,©

olllO 6

Optical Digital Audio S-Video Out Audio Output 2

Output Connector Connector Connector (L/R)

(DVD Only) (DVD Only) p. 13 Audio Output 1

p. 15 p. 10, 13 Connector(L/R)

p. 12

Audio Input

Connector (L/R)

p. 35

The following table shows the status of the output jacks when in VCR or DVD mode.

Video Output Component S-VIDEO OUT

Audio Out 1 Video Output

Audio Out 2

VCR YES N/A N/A

DVD YES YES÷SELECT SW (Switchable)_YES

O• PROG functions on the remote are not available when using Component Video Output

and S-VIDEO OUT. Please set TV to either RF INPUT or VIDEO INPUT, and then press

PROG.

- To enjoy PROGRESSIVE SCAN video (PV-D4752 only)

(1). Connect Component Video Output to the component video input terminals of a television.

(See p. 13.)

(2). Set the "COMPONENT VIDEO OUT"/"S-VIDEO OUT" SELECT SWITCH, in the back of the

DECK, to "COMPONENT VIDEO OUT." (See above.)

(3). When the PROGRESSIVE button is pressed, the ON lamp lights up (see p. 9) and the

PROGRESSIVE SCAN signal is output from the Component Video Output Connector.

Note

• The PROGRESSIVE button can be operated when the DECK is in DVD function mode.

• The screen may shift off-center when using progressive output. Please adjust the screen

position if this occurs. (Refer to your TV manual.)

• The unit does not output video signals from the "VIDEO OUT" or "S-VIDEO OUT" terminals

when the ON lamp is lit.

_i1_l_'.Tz1_FzYfi_[i_lF"J_1'E1l , .., ." i, ,.,llT"4L_'i_tir..T.-T..]itt,.xa..]

EoJi_'_.] h[,_,_il H_-].]_U_ll ILvLo]-'tmm

Function & Channel Displays

When a function button

CH 08 is pressed, e.g. PLAY,

or you change

channels, a 5-second

display appears.

Blank Tape/No Video Signal

Indications

Whenever a blank section of a tape

comes up in Play mode, or when the

selected channel has no broadcast

signal with Weak Signal Display

Feature (p. 33) set to OFF, the TV

screen will turn solid blue.

VCR Status & Clock Displays Function Status\\

To display or remove _

overlay at right, Rec Time Remaining

÷press DISPLAY. (OTR mode only,

see p. 21 .)

Current Time Channel

12:00AM CH02 -- Counter

C_STEREO • SP_

(coSAP

MONO

Broadcast Audio

Being Received

(See p. 26.)

Tape Speed

(See p. 6.)

I_TJ!111111 i! I i[_ i [o] il I} I.'] i] _|r|

VCR Indicator _

Lights up when the _

VCRiTV selector is \\

set to VCR. \\\

Power Indicator _

Lightsup when power is on. \

Hi-Fi Indicator

Lights up when Hi-Fi audio

is monitored in Play mode.

Timer Indicator

Lights up when DECK is set for

Timer Recording, or when One

Touch Recording (OTR) is

used. Flashes when Timer

Recording is set, but a tape has

not been inserted into DECK and

when a power interruption

occurs during Timer

Programming.

Clock/Status/Channel/Speed Display

Displays the current time. Briefly displays VCR

status when a function button is pressed. Briefly

displays the channel number, or "LI" or "L2" when

a channel or line input is selected. Briefly displays

the recording speed when SPEED is pressed.

Lights up before noon.

PM is not displayed.

ANGLE Indicator

Lights up when a scene

recorded at different

angles is detected.

See p. 37. (DVD only).

•If your TV has AUDIO and VIDEO IN terminals, connect them to DECK for higher

quality picture and sound.

• You can enjoy stereo sound even if your TV is not stereo by connecting a stereo

amplifier to DECK.

•Connect DECK and TV with an RF Coaxial Cable (_) (supplied) or an AV Cable (_

(not supplied) as shown in the figure below.

•DSSReceiver=kDECK=kTV •DECK.I, TV

Antenna or Cable

•Cable Box .I,DECK.I_TV

DSS

Receiver CableBox

DVD/VCR DECK

LOVHF/UHF

AUDIO OUTTOTV

R ©

Disconnect antenna or cable from TV

and connect to DECK.

2Connect DECK to TV wffh RF Coaxial Cable.

RF COAXIAL CABLE

VHF/

AUDIOIN

R L IN

A V CABLE (not supptied)

rw'""'"° I

When using "Nut type" RF coaxial cables, tighten with

damage terminals.Overtightening may

fingers only.

Note to CABLE system installer

This reminder is provided to call the CABLE system installer's attention to Article 820-40 of the

NEC in USA (and to the Canadian Electrical Code in Canada) that provides guidelines for proper

grounding and, in particular, specifies that the cable ground shall be connected to the grounding

system of the building, as close to the point of cable entry as practical.

[O]]I iT:.-]dqll_o) i1 i[_ _[o) iT-_

•With a Cable Box (DECK-I_Cable Box-l, TV)

D VD/VCR DECK m _ -I

-_1 TV

•Connect With Two Cable Boxes

D VD/VCR DECK

5NT'3

I or I Cable Box

•view any

(including

scrambled)

channel.

• use Remote

Control to select

channels without

using Multi-brand

control feature.

record and view

both scrambled

and unscrambled

channels if

additional

equipment is

added.

This connection

requires: two

converter boxes,

an A/B switch,

and a 2-way

splitter.

• record

scrambled

channels.

• view channel

other than the

one selected

for any type of

recording.

• do a Timer

recording of a

channel unless

you select it on

the Cable Box.

(_Connect AUDIO OUT2 (L, R) to the AUDIO IN (L, R) of the TV. (audio input for COMPONENT

or S-VIDEO mode).

(_)lf your TV has COMPONENT VIDEO INPUT, set SELECT SW to COMPONENT VIDEO OUT.

If your TV does not have COMPONENT VIDEO INPUT but has S-VIDEO INPUT, set SELECT

SW to S-VIDEO OUT.

O•The picture will not be displayed if the SELECT SW is not set to the correct video output.

COMPONENT

(_)When in DVD mode, set your TV to either COMPONENT VIDEO IN or S-VIDEO IN.

•You can watch DVDs through the S-VIDEO or COMPONENT VIDEO, VHF/UHF OUT TO TV,

and VIDEO OUT connections to your TV. The VCR and TUNER pictures are available only

from the VIDEO OUT and VHF/UHF OUT TO TV connections to your TV.

• PROG functions on the remote are not available when using S-VIDEO OUT and COMPONENT

Video Output. Please set TV to either RF INPUT or VIDEO INPUT, and then press PROG.

DVD/VCR DECK From DECK's

_ _ A/V OUTPUT

IAU[_OOUT2

I/1_1

I _J h

NP2ffr_I1";I[_

I_' Ready Checklist

[] Turn down the volume, then turn DECK, as well as other equipment to be connected,

off before proceeding with connection.

[] Do not block ventilation holes of any of the equipment and arrange them so that air can

circulate freely.

[] Read through the instructions before connecting other equipment.

[] Ensure that you observe the color coding when connecting audio and video cables.

•DECK ,I, Amplifier ,) Speaker

DVD/VCR DECK Speaker Amplifier Speaker

AUDIO OUT2

Enjoying digital audio output from the digital audio output connector

Notes on audio output from the optical digital audio output connector

Disc Sound recording format Optical digital audio output from connector

DVD Dolby Digital Dolby Digital bitstream (1-5.1 ch)

or OFF (no output) .1

Linear PCM Linear PCM (2ch)

(48/96 kHz 16/20/24bit) (48 kHz sampling/16 bit only) .2 or no output .1

dts Bitstream or no output *_

VideoCD MPEG 1 PCM (44.1 kHz sampling)

CD Linear PCM Linear PCM (44.1 kHz sampling)

MP3 MP3 Linear PCM (It depends on the MP3 file)

"1 The type of audio output from the connector can be selected by the Settings for DVD

Operation. (See p. 46.)

*2 Sound having 96 kHz sampling is converted into 48 kHz sampling when it is output

from the DECK's optical digital audio output connector.

For your reference:

• Dolby Digital is a digital sound compression technique developed by the Dolby Laboratories

Licensing Corporation. Supporting 5.1-channel surround sound, as well as stereo (2-channel)

sound, this technique enables a large quantity of sound data to be efficiently recorded on a disc.

• Linear PCM is a signal recording format used in CDs. While CDs are recorded in 44.1 kHz/16 bit,

DVDs are recorded in 48 kHz/16 bit up to 96 kHz/24 bit.

• If you have a Dolby Pro Logic Surround decoder, you will obtain the full benefit of Pro Logic from

the same DVD movies that provide full 5.1 channel Dolby Digital soundtracks, as well as from

titles with the Dolby Surround mark. For information on Panasonic or Technics Dolby Pro Logic

Surround Sound Decoders please contact your local dealer.

Manufactured under license from Dolby Laboratories.

"Dolby" "Pro Logic" and the double-D symbol are trademarks of Dolby Laboratories.

•DECK ,_ Dolby Digital Decoder ,l, Amplifier ,I, Speaker

DECK ,I, dts (digital theater systems) Decoder ,I, Amplifier ,I, Speaker

When DVDs recorded in Dolby Digital or dts are played, Dolby Digital bitstream or

dts bitstream is output from the DECK OPTICAL digital audio output connector.

When DECK is connected to a Dolby Digital decoder or dts decoder, you can enjoy

theater-quality audio in your home. [An optical digital audio cable (optional) is

required when an optional Dolby Digital decoder or dts decoder is used.]

Notes on connecting an optical

digital audio cable (optional)

• Firmly connect the cable to the

connector.

Surround Surround

Speaker Speaker

Decoder with Dolby

Digital dts processmg Front

(optional) Speaker

Front

Speaker

Optical Digital

Audio Cable

(optional)

To Optical

Digital Audio

Input Connector

Caution for optical digital audio output connector:

•When connecting an amplifier (with an optical digital input connector) which does not

contain the Dolby Digital or dts decoder, be sure to select "OFF" at "Dolby Digital" and

"OFF" at "dts" of the Settings for DVD Operation "AUDIO OUTPUT" (see p. 46).

Otherwise, any attempt to play DVDs may cause such a high level of noise that it may

be harmful to your ears and damage your speakers.

•When a dts decoder is connected, please select "Bitstream" at "dts" of the Settings for

DVD Operation "AUDIO OUTPUT".

If "OFF" is selected, there will be no sound. (See p. 46).

°Video CDs and CDs can be played as usual.

Note:

• Some dts decoders which do not support DVD-dts interface may not work properly with DECK.

Turn TV on.

See connections (_) RF Coaxial Cable Connection and @ AV Cable Connection on p. 12.

Set TV to channel 3.

Set TV to VIDEO.

[DECK ÷TV]

• GO to "Doing Initial Setup (Ready to Play)." (See below.)

[Cable Box --_ DECK --_TV], [DSS --_ DECK --_ TV]

• Turn on Cable Box and set it to your Public Broadcasting Station (PBS) channel

in your time zone.

• If you use a DSS Receiver, it must be turned off.

Press VCR on remote for VCR mode.

Plug DECK Power Cord into AC wall outlet. DECK comes on and auto channel

and clock set starts.

•If screen below does not appear, check DECK - TV connection and, if TV is tuned to

channel 3, try switching it to channel 4.

• To change VCR's output channel, please refer to "VCR's Output Channel" on p. 19.

Plugging the AC Power Plug into

an AC outlet

\ / Jj

CH AUTO SET PROCEEDING

CANC_:STOI_ "

AUTO CLOCK SET

PROCEEDING

CANCEL:STOP

_iI_I_'.TzI_FzT__IF"J_I'EII , .., ,," i, ,.,llT"4L_'i_Tir.T.-T..]itt,.xa..]

Settings are made automatically.

When setup is done, this screen appears.

9/29/2002SUN 2:20PM

[3ST :ON

SETTING : CH 10

AUTO CLOCK SET

CO_v_pLETEB

G3 QD (]D

(3D (]D £E)

(:E,/_I

_(:z:)cz:)_./c:2,,,'

-- ACTION

-- SELECT

-- SET

If "AUTO CLOCK SET IS INCOMPLETE"

appears, manually set clock. See below.

AUTO CLOCK SET IS

I NCOMPLETE

PLEASE BET CLOCK BY

PRESSING ACTION KEY

If Auto Clock Set was incomplete.

Press ACTION* on remote to display

CLOCK screen.

DST:ON

SELECT:& •

SET :SET

EXIT :ACTION

Press AT to select the month and SET to

set. In the same manner, select and set the

date, year, time, and DST (daylight saving

time).

| SET : gET BACK : 4

(,START :ACTION

Press ACTION to start clock and exit.

1MENU

SET CLOCK

SET UP CHANNEL

tDIOMA!LANGUE : ENGLISH

VCR'S OUTPUT CH:3

SELECT : • • SET:SET

EXIT : ACTION

Press ACTION*

to display MENU.

•PROGRAM functions are not available

when using COMPONENT Video Output

and S-VIDEO OUT. Please set TV to

either RF INPUT or VIDEO INPUT, and

then press PROGRAM.

2•Language

1) Press AT to select

language item.

SET UP VCR

SET CLOCK

SET UP CHANNEL

VCR'S OUTPUT CH:3

SELECT:• • SET:SET

EXIT : ACTION

2) Press SET repeatedly.

PREPARAR VCR

FIJAR RELOJ

PIJAR CANAL

CANAL DE SALIDA : 3

ELEGIR : • •FIJAR : SET

SAUR : ACTION

For Spanish

MENU /

REGLAGE MAGNETOSCOPE

REGLAGE HORLOGE

REGLAGE CANAL

CA SORTIE : 3 /

SEL. : • • REGLER:SET /

QUITTER : ACTION J

For French

SET UP VCR

SET CLOCK

SETUP CHANNEL

VCR'S OUTPUT CH:3

SELECT:•• SET:SET

EXIT :ACTION

For English

3) Press ACTION to exit.

•Channels

1) Press AT to select

"SET UP CHANNEL,"

and press SET.

SET UP VCR

SET CLOCK

...... ===,_

--_D_O_L_E:ENGUSN

VCR'S OUTPUT CH:3

SELECT:• • SET:SET

EXIT :ACTION

2) Press AV to select

"ANTENNA," then

press SET to set your

antenna system

("TV" or "CABLE.")

SET UP CHANNEL

_|fl_J_1.--:_: I.

AUTO SET

_WEAK SIGNAL DISP_Y:OFF

SELECT:•• SET:SET

3) Press AY to select

"AUTO SET," then

press SET.

• If you use a Cable Box,

set it to the PBS channel

in your time zone.

CH-AUTO SET PROCEED_ING-

CANCELL:STO_ _"

• After Channel Auto Set

is finished, Auto Clock

Set will be performed.

•Clock

1) Press AV to select

"SET CLOCK," and

press SET.

I MENGSET UP VCR

SET UP CHANNEL |

tDIOMA/LANGUE :ENGLISI ]

VCR'S OUTPUT CH:3

SELECT : • • SET : SET

EXIT : ACTION

2) Press AV to select

"MANUAL," and press SET.

(For Auto Clock Set, select

"AUTO CLOCK SET.")

SET CLOCK

AUTO CLOCK SET

TiME ZONE ADJUST : O

SELECT:• • SET:SET

EXIT :ACTION

("TIME ZONE ADJUST"

appears only when auto

clock is set.)

3) Press A_' and < to

select, then set the date,

time, and DST (Daylight

Saving Time).

4) Press ACTION to start.

Clock and exit this

mode.

*Important: If a remote control button does not work

when pressed, press the VCR button

on the remote and try the button again.

/POWER

VCR

•"13meZone Adjust

(Only when Auto Clock is set.)

1) Press AV to select

"SET CLOCK," and

press SET.

SET UP VCR

SET U_-_HANNEL

tOIOMA/LANGUE : ENGLISH

VCR'S OUTPUT CH:3

SELECT : • • SET : SET

EXiT : ACTfON

2) Press AV to select

"TIME ZONE ADJUST,"

'mOO • no- - - ._

SET CLOCK

AUTO CLOCK SET

MANUAL

•'l 0

SELECT:• • SET:SET

EXIT :ACTION

and press SET to

subtract or add hour(s)

as necessary.

3) Press ACTION twice.

•"TIME ZONE ADJUST"

returns to "0" if clock is

set manually.

•VCR's Output

Channel

1) Press AV to select

"VCR'S OUTPUT CH.,"

and press SET.

SET UP VCR

SET CLOCK

SET UP CHANNEL

tDIOMA!LANGUE : ENGLISH

SELECT:• • SET:SET

EXiT : ACTfON

2) Press SET.

I IF YOU PRESS ACTION

KEY, VCR'S OUTPUT CH

SWITCHES TO CH 4.

3) Press ACTION.

PLEASE TUNE YOUR TV TO

CH 4.

After 3 seconds

SET UP VCR

SET CLOCK

SET UP CHANNEL

tDIOMA/LANGUE:ENGLISH

SELECT:• • SET:SET

EXIT :ACTfON

• To Make Corrections,

repeat steps 1) ~3).

[_ NUMBER

keys

ACTION

ADD/DLT

SELECT

AV<_,

SET

OH A/V

To add channel:

Select channel with NUMBER keys

and press ADD/DLT.

I CHANNEL 08 ADDED 7

To delete channel:

Select channel with CH _ or

NUMBER keys and press ADD/DLT.

I CHANNEL 08 DELETED ]

DECK auto adjusts clock for DST.

(p. 17.)

Spring (First Sunday in April)

DST:ON ÷ Sets clock ahead one hour.

Autumn (Last Sunday in October)

DST:ON ÷ Turns clock back one hour.

• If your area does not observe

Daylight Saving Time, select

DST:OFF.

• Keep these time changes in mind

when programming DECK for

timer recordings.

I_' Ready Checklist

[] All connections are made (pp. 12 ~ 15).

[] TV and DECK are plugged in.

[] TV is on and tuned to CH3, 4, or VIDEO.

[] Remote is in VCR mode. (Press VCR.)

1Insert a tape.

•DECK power comes on.

The VCR mode and "VCR" indicator light up

on Multi Function Display.

Press PLAY* to play a tape.

• If tape has no rec. tab (p. 6), auto play begins.

I Special Features During Play I

•Forward/Reverse Scene Search

÷Press FF/SLOW+ or REW/SLOW-.

÷Press PLAY to release.

After search has begun, each additional press of

FF or REW changes speed as shown below.

[SLP] :Approx. 21X < _Approx. 9X

[LP] : Approx. 9X _ _Approx. 7X

[SP] : Approx. 7X < _ Approx. 3X

If at 21X, 9X, or 7X speed the picture is

interrupted, change speed to 9X, 7X, or 3X.

•Pictureinterruptionmay occurwith some TVs.

• FF and REW search speed may vary

dependingon currenttape position.

• Still (Freeze) Picture

÷Press PAUSE/STILL

-_ Press PLAY to release.

•Frame by Frame Picture

-_ Press PAUSE!STILL in Still mode.

-_ Press PLAY to release.

•Slow Motion Picture

-_ Press FF/SLOW+ (increase speed) or

REW/SLOW- (decrease speed) in Still

mode.

-_ Press PLAY to release.

Press STOP to stop a tape.

• Press REW/SLOW- or FF/SLOW+ in Stop

mode to rewind or fast forward a tape.

•Press EJECT on remote, or STOP/EJECT

on DECK to eject a tape.

EJECT_

REW/SLOW-

VCR/TV--

STOP--

-- DVD

-- PLA Y

-- FF/SLOW+

-- PAUSE/

STILL

-- OH JJV

-- REC

-- SPEED

• These features work best in SP or SLP mode.

• The sound will be muted.

• To reduce picture noise, see "Manual Tracking

Control" on p. 6.

• After DECK is in Still or Slow mode for 3 minutes,

it will switch to Stop mode automatically to

protect the tape and the video head.

Playback using DECK buttons

2Press PLAY. 1Insert a tape.

_-_ _

I Multi Function Display

• Press STOP/EJECT to stop

and/or eject a tape.

1Insert a tape with a record tab (p. 6).

•DECK power comes on.

The VCR mode and "VCR" indicator light up

on Multi Function Display.

2Press CHAv, or NUMBER keys

to select the channel.

• For "LINE" input, see p. 35.

• If channel is over 100, press 100 key then press

the remaining 2 digits.

3Press SPEED

to select the record speed (p. 6).

SP = Standard Play LP = Long Play

SLP = Super Long Play

• Speed appears on-screen and on Multi Function Display.

Press REC

to start recording.

(The VCR REC indicator lights up on Multi Function

Display),

• To edit out unwanted scenes, press PAUSE/STILL

to pause, and again to resume recording.

• You cannot view another channel during recording.

Press STOP

to stop recording.

]

This video recorder, equipped with HQ /

(High Quality) system, is compatible /

with existing VHS equipment. Only use /

tapes with the _ mark. Only tapes /

tested and inspected for use in 2, 4, 6, /

and 8 hour machines are /

recommended. /

Remove loose or peeling

labels from tapes to prevent

tape jam.

•One Touch Recording (recording in progress),

÷ Press REC repeatedly to set the recording length

÷ (30 min. ~4 hours).

• DECK shuts off after the preset record length.

• Record one station, watch another,

÷ press VCR/TV

("VCR" goes out on Multi Function Display),

÷ select channels at TV (recording continues).

•Select Channels at DECK (In STOP or

REC. PAUSE mode),

÷ press VCR/TV

("VCR" lights up on Multi Function Display),

÷ select channels at DECK.

• Play adisc while recording atape.

÷insert a disc during recording,

÷ press DVD, and then press PLAY.

•It is not possible to record from DVD/Video

CD/CD to VHS tape usinq DECK.

•Watching one channel and recording another

is not possible when using Cable Box or

DSS Receiver.

• After 5 minutes in Pause mode, DECK stops to

protect a tape and video heads.

_44: _: rm+--al:_ c,_--_i0_ 0,11--_13_ "_

Record using DECK buttons

1Insert a tape.

VCR/TV /

2Select

Channel.

Press REC

to start

Recording.

Multi Function Display

• Press STOP/EJECT to stop.

,.. J

I_' Ready Checklist 1

[] All connections are made. (pp. 12 ~ 15)

[] DECK is plugged in. Z

[] If DECK is connected to an audio amplifier,

turn the stereo system's power on.

..... OPEN/

t-'uvvt:__ CLOSE --3

PLAY-- _0_ DVD

nEW/ _FF/

SLOW-- _SLOW+

STOP-- __(PAUSE/

NUMBER (3D (33 CD I II STILL

keys CO OD OZ)

_SURROUND

RETUR, lt

SKIPI4 _,f_--------_--_Q_"l_ SKIPINH

Press POWER* on the remote or DECK.

Press DVD to select DVD mode.

If a disc is already inserted, go to step 4.

(Depending on the disc, playback may

start automatically.)

Press OPEN/CLOSE,

and then place a disc into the disc tray.

• Hold disc by its edges

only (p. 4) with printed

side up and use guides to

place into tray.

Use 0 3"(8 cm)

or _ 5" (12 cm) disc.

If an interactive DVD *_ or

a Video CD with playback

control .2 is used and TITLE

MENU appears, go to step 5.

Press PLAY to start playing.

Disc tray closes automatically.

• You may also close tray by

pressing OPEN/CLOSE.

• Data reading time differs with

each disc.

Operation using DECK buttons

3, 7 Press

OPEN/CLOSE.

disc. 4Press PLAY.

3Insert a l.....

..... - _

" t

1Press 6Press STOP.

POWER

,1 Interactive DVD...

May include multiple camera angles,

stories, etc.

*_ Video CD with playback control...

Particular scenes or information can be

interactively selected from a menu that

appears on the screen.

TITLE MEN_]

5 oogs

Iof the world

Press AV< • or

NUMBER keys (see

below) to select title,

and

press SETto play.

Using NUMBER keys starts playing automatically.

<Example> 1 digit number 1 ••• 1

2 digit number 12 •,,,>= 10 1 2

3 digit number 123 •••100 1 2 3

Press SKIP IHI_I or 1<41to go to next or previous

menu screen.

• SKIP function not available with all discs.

Please refer to disc jacket for operation information.

TO return to menu (play stops)

Press TITLE, MENU, or RETURN. (DVD)

Press RETURN. (Video CD)

Press STOPto stop playing.

Press OPEN/CLOSE to eject the disc.

•Forward/Reverse Scene Search

Press FF/SLOW+ or nEW/SLOW-

during play.

Press PLAY to release.

•Starting forward/reverse search during play

started from menu on Video CDs may recall

menu.

• Search speed, slow at first, increases with each

additional press of the button up to 5 levels.

•Forward/Reverse Chapter/Track Skip

Press SKIPIH_I or 144 SKIP during play.

Each press skips achapter (DVD) or

track (Video CD/CD).

•Pressing 144 SKIP once midway through a

chapter/track returns to the start of that

chapter/track. Each additional press skips

back one chapter/track.

• Pressing SKIP I_1 or I_ during play started

from menu on Video CDs may recall menu.

Current playback position

Reverse Skip _-_,,-: Forward Skip

• Still Picture or Pause

Press PAUSE/STILL during play.

Press PLAY to release.

• DVD/Video CD :DECK will enter still picture

mode.

• CD : DECK will enter pause mode.

•Frame by Frame Picture

(DVD/Video CD)

Press PAUSE/STILL in still mode.

Press PLAY to release.

•Each press advances picture one frame.

• Hold button down for consecutive frame advance.

• Whether pictures are advanced by "FRAME" or

"FIELD" is selected automatically. (See p. 47)

•Slow Motion Picture (DVD/Video CD)

Press FF/SLOW+ or nEW/SLOW-

in still mode.

Press PLAY to release.

•Slow motion speed, slow at first, is increased

with each additional press of the button up to

5 levels.

• Reverse slow motion is not available for Video

CDs.

• When Q appears on the screen while a button

is being operated, it means that the

corresponding operation is prohibited by DECK

or the disc.

Press SURROUND

to set Surround sound.

To cancel,

press SURROUND.

• Surround sound effects is available in

DVD mode only.

DECK memorizes the point where STOP is

pressed ( • flashes on screen).

Press PLAYto resume play from this point.

Pressing STOP again or opening the tray

cancels RESUME, however, RESUME is not

canceled when power is turned off and on.

• RESUME works only with discs for which

elapsed play time is displayed during play.

Power turns off after DECK has been in

Stop mode (DVD) for about 5 minutes.

1. Do steps 1-4 (previous page).

When menu appears, press STOP.

2. Press NUMBER keys to select desired

track (play begins).

• Check disc for track numbers.

•Press "1" to start at beginning of disc.

TO Resume Menu use,

Press STOP and press PLAY, then the

menu will be displayed.

Now, go to step 5 (previous page).

• Please read the disc jacket for operation

information.

• If a single sided disc is placed in upside

down, "PLEASE CHECK THE DISC, AND

FOR STAINS OR SCRATCHES ON

DISC" is displayed.

• Remove disc and press DECK POWER

off when not in use.

• Disc continues to rotate with menu

displayed even after play is done.

Press STOP to clear menu display when

finished with menu. 23

_11_ Ready Checklist

[] All connections are made (pp. 12 ~ 15),

[] TV and DECK are plugged in.

[] Clock set correctly.

[] Tape has rec.tab. (p. 6)

[] Remote is in VCR mode. (Press VCR,)

[] Sufficient tape remaining for recording time.

Press PROG*

to display Program.

2/P--_-_-_-----:---'-- sLP/

Li!iECTis GJ

Example

Today

F14...31-, q

I / 0A,LY

[___ -- SELECTA I• WEE/LY

1_ Selection Order (SUN)

I WEEKLY

___. WEEKLY..... _M,O,>

Is_T)

1) To set record DATE,

press .V to select:

1-31= one time, or

DALLY= MON~ FRI, or

WEEKLY= same time

each week and

press SET.

• See selection order left.

2) To set remaining items,

press AV

to select and

press SET

to set START/STOP times,

CH(channel) or LINE input

(p. 35), and tape speed

(SP, LP, SLP).

Press PROG

to end programming.

POWER

ADD/DLT

PROG

-- SELECT

AT<b"

\_- SET

_To Enter More Programs,

press &T

to select and

press SET

to set an unused program

number, and then repeat

step 2.

Press PROG

to exit.

VCR mode Indicator

Multi Function Display

//i X.

VCR REC Indicator TIMER indicator

• The "Timer " Indicator lights up on DECK.

• You can do Timer Recording with the power or off.

• "TIMER REC WILL START SOON" appears on-screen for 2 minutes

before Timer Recording starts. If DECK is in DVD mode, no message

appears, but the VCR REC Indicator, the VCR mode indicator and

"REC" will flash on Multi function Display.

Review, Replace or Clear Program Contents:

(Recording is not in progress)

Press PROG

to display Program List.

_Press Av

to select number and

press SET

to display.

3To Replace program...

E°' oAoK:.J

To Clear program...

Repeat Step 2 (p. 24)

to set new programs.

Press ADD/DLT.

To cancel a Timer

_-- Recording in progress...

Hold down STOP on VCR mode for

afew seconds to cancel the Timer

Recording.

(The "TIMER" Indicator goes out

on Multi Function Display.)

•Any future daily or weekly recording

will be performed as programmed.

Press PROG

to end the programming.

•If you are using a Cable Box, the VCR's channel for Timer Recording must be set to

the Cable Box input channel and Cable Box must be manually set to the desired

channel. Cable Box power must be left on.

•2 minutes before Timer Recording is performed, "PLEASE PREPARE FOR TIMER

REC" appears and Timer Indicator flashes.

Be sure a cassette with record tab is loaded and DECK is in Stop mode.

•If a power interruption occurs while programming the timer, the timer program(s) may be

canceled. If "TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION"

appears on-screen, please re-enter the timer programs.

•If the start time for Timer Recording comes up during recording and playing back,

Timer Recording will not be performed.

Important notes when using DSS Receiver

•When recording programs via DSS Receiver, DSS Receiver must be left on.

•When recording programs via an antenna or cable, DSS Receiver must be turned off.

Connection

Make the Audio/Video Connection as shown on pp. 12 - 15.

• You can use TV connected to a Stereo amplifier and speakers instead of Stereo TV.

The following are possible audio broadcast types and on-

screen displays.

The signal being received is indicated with an "((€"mark

while the selected audio mode is indicated with an arrow.

To display the broadcast signal being received,

÷press DISPLAY*.

MTS Stereo and SAP broadcast

Multi-channel Television Sound

Stereo (main language) and

Secondary Audio Program (sub

language) broadcasts are being

received simultaneously.

Select STEREO or SAP audio mode.

STOP 12:00AM CH 02

0:00:00

_STEREO • SP

_SAP

MON0

MTS Stereo broadcast

Multi-channel Television Sound

Stereo broadcast. Select STEREO

audio mode.

• If stereo broadcast is weak and

display flickers, select MONO audio

mode for possible better results.

STOP 12:00AM CH 02

0:00:00

/_STEREO • SP

/ SAP

MONO

O_€:m

G3 (2D (3D

DISPLAY

AUDIO

(SAP/Hi-Fi)

SAP broadcast

Secondary Audio Program (sub

language) broadcast. Select SAP

audio mode for the sub language.

MONO broadcast

Normal monaural sound broadcast.

STOP 12:00AM CH 02 1

0:00:00

|STEREO SP

/eSAP •

MONO

I STOP 12:00AM CH 02

0:00:00

STEREO SP

SAP

MONO •

Equipped with dbx®-TV

Noise Reduction for

true MTS reproduction.

dbx_-TV Noise

Reduction is required

for good stereo

separation and audio

fidelity, dbx®is a

registered trademark,

and is licensed by dbx_

Technology Licensing.

Press AUDIO (SAP/Hi-Fi)

to display audio mode.

(Display disappears after 5 seconds.)

2Press AUDIO (SAP/Hi-Fi) repeatedly

to select desired mode.

• Refer to "Receivable Broadcast Types" on p. 26.

• Arrow indicates selection.

Doa recording.

See p. 21.

Start playback.

See p. 20.

Press AUDIO (SAP/Hi-Fi)

to display audio mode.

HIFI:L/R4

HIFI:L

HtFI:R

NORMAL

Arrow indicates

selection.

Press AUDIO (SAP/Hi-Fi) repeatedly

to select desired mode.

• Select "HIFI (L/R)" or "HIFI (L)" or "HIFI (R)" to listen to stereo

recordings in stereo sound.

Select "NORMAL" for monaural sound.

• Display disappears after 5 seconds.

•Only tapes recorded in Hi+Fi stereo will playback with true stereo sound. Standard

stereo tapes will playback in monaural sound.

• To listen to Hi-Fi stereo playback, the DECK AUDIO (L/R) jacks must be connected to

a stereo TV or an external stereo amplifier and speakers. (See pp. 12, 14, 15.)

• If tracking is adjusted during playback, Hi-Fi audio may revert to normal audio.

• Hi-Fi and normal audio playback volume level may differ.

The Remote Control can be set to control some TV and

Cable Box/DSS functions.

Find your TV and Cable Box/DSS Receiver

Brand Code Number on the following page.

2•Setup for TV control,

÷hold down TV button,

÷enter code with NUMBER keys.

•Setup for Cable or DSS control,

÷hold down DSS/CABLE button,

÷enter code with NUMBER keys.

•If code number is 100 or greater,

-,_e.g., press 1 - 0 - 2 for 102.

Confirm code entry,

,_ press POWER to turn selected unit on or off.

• See table below for controllable functions in each mode.

• Repeat setup after remote battery replacement.

• Remote will not control every TV, Cable Box, or

DSS made by the manufacturer listed. If you get

no response, your particular unit cannot be

controlled. There are NO additional codes for the

products listed. If your product is not listed, then

the remote is not compatible with that product.

After remote is set up, you can select VCR, DVD, TV, or

DSS/CABLE for the desired function.

Press VCR, DVD, TV, or DSS/CABLE on the remote.

Table below shows available remote buttons for each mode.)

DVD/VCR TV

DVDNCR All VOL +/-

TV EJECT/OPEN/CLOSE*,

DISPLAY, PLAY, STOP,

FF/SLOW+, REW/SLOW-,

VCRFrV, PAUSE/STILL, SKIP,

AUDIO, CM/ZERO,

CABLE/ TAPE POSITION,

DSS COUNTER RESET, SPEED, VOL +/-

REC

POWER, INPUT,

NUMBER keys,

ENTER,

CHef Jr,

VOL +/-

CABLE/DSS

POWER, ENTER,

NUMBER keys

(except 100key),

CH A/V

-- POWER

-- VCR

DSS/

CABLE

--TV

-- DVD

-- - NUMBER

QD QD keys

- ENTER

* Bold: VCR Function

Itafic: DVD Function Bold Itafic: VCR and DVD Functions

Normal: TV, Cable Box or DSS Receiver

• Not all functions listed may be controllable.

• In TV or DSS/CABLE mode, it may be necessary to press ENTER after pressing

NUMBER keys for channel selection.

28 I_.__._.-_._,__.,,,,_=_,jr_ _-_=_._.H. e,_,IdP.i,J,=/_.,_r_.,,_._._=,_._.,_,=_ ._ H,,,._.,,_,,,,,_ ,,, ,,_,,,,. _,_,,_ _._,,_._. =

Panasonic ....................... 01, 02

Quasar ............................ 01, 02

RCA ....................................... 03

GE ......................................... 03

Zenith .................................... 04

Magnavox .............................. 05

Sylvania ................................ 05

Sharp ............................... 06, 07

Sony ...................................... 08

Toshiba ................................. 09

Sanyo .................................... 10

Fisher .................................... 10

JVC ........................................ 11

Hitachi ................................... 12

Mitsubishi ........................ 07, 13

Samsung ............................... 14

Gold Star ................... 15, 16, 17

Archer ......................... 44, 06, 01, 120, 05, 63, 126

Cableview ................ 29, 09, 01, 63, 120, 44, 42, 30

52, 04, 124, 126

Citizen ................... 44, 52, 30, 63, 42, 04, 124, 126

Curtis ..................................... 08, 09, 25, 61, 53, 87

Century ...................................... 44, 51, 75, 59, 126

Cabletenna .................. 29, 09, 01, 63, 120, 44, 126

CableCinema .............. 29, 09, 01, 63, 120, 44, 126

Diamond ...................... 29, 09, 01, 63, 120, 44, 126

Eagle ....................... 62, 40, 22, 13, 58, 20, 26, 107

Eastern ................................................... 28, 29, 130

Explorer .................................. 08, 09, 25, 61, 53, 87

Gemini ..................................................... 30, 04, 124

General Electric ...................................... 01, 57, 120

General Instruments. 01, 84, 83, 34, 03, 02, 04, 55

65, 66, 67, 68, 120, 106, 121,122, 115, 117, 118, 124

Gerrard ............................................... 44, 51, 75, 59

GC Electronics ............... 44, 42, 63, 29, 30, 52, 04

124, 126

Hamlin ............... 41, 14, 15, 28, 102, 104, 103, 130

Hitachi ................................................................... 31

Jerrold .......... 01, 84, 83, 34, 03, 02, 04, 55, 65, 66

67, 68, 120, 106, 121, 122, 115, 117, 118, 124

Jasco ...................................................... 30, 04, 124

Macom ................................................................... 31

Magnavox ...................................................... 26, 112

Matsushita ................................. 17, 16, 08, 87, 109

Movietime ...................... 32, 39, 42, 44, 126, 38, 40

Maestro ........................................................... 74, 35

NEC .................................................... 40, 19, 38, 32

NSC .................................................... 40, 19, 38, 32

Novavision ............................. 08, 09, 25, 61, 53, 87

Next Level ........... 01, 84, 83, 34, 03, 02, 04, 55, 65

66, 67, 68, 120, 106, 121, 122

Oak ................................................. 46, 11, 129, 101

OakSigma ..................................... 46, 11, 129, 101

Panasonic .................................. 17, 16, 08, 87, 109

Philips ................... 23, 24, 20, 13, 07, 50, 128, 129

Pioneer ...................................................... 06, 05, 12

Pulsar .................... 04, 42, 63, 44, 30, 52, 124, 126

Quest ........................................................ 06, 05, 12

Radio Shack ............................... 44, 51, 75, 59, 126

RCA ............................................ 17, 16, 08, 87, 109

Realistic ..................................... 44, 51, 75, 59, 126

Recoton ...................................... 44, 51, 75, 59, 126

Regal ................. 41, 14, 15, 28, 102, 104, 103, 130

Regency .................................................. 28, 29, 130

Rembrandt ....... 44, 42, 63, 29, 01, 32, 39, 120, 126

Samsung ...................................... 42, 06, 32, 05, 40

Scientific Atlanta ................... 08, 09, 25, 61, 53, 87

Sheritech ............................................................... 27

Signal ............................................................ 26, 112

SL Marx ............. 42, 06, 32, 40, 43, 44, 52, 63, 126

Sprucer ...................................... 17, 16, 08, 87, 109

Standard Components ............... 32, 39, 42, 44, 126

Stargate .............. 04, 42, 32, 40, 63, 44, 30, 52, 06

124, 126

Sylvania .......................................................... 19, 18

Teknika ........................................................... 74, 35

Telecaption .................................................... 77, 127

Teleview ................................. 40, 19, 38, 32, 42, 06

Texscan .......................................................... 19, 18

Tocom ................................... 34, 33, 01, 42, 66, 120

Toshiba ................................................................. 36

Unika ........................... 44, 42, 63, 29, 01, 126, 120

Universal .............................. 52, 43, 44, 63, 42, 126

Viewstar .................. 62, 40, 22, 13, 58, 20, 26, 107

Videoway .......................................... 07, 23, 50, 129

Vidtek .................................................................... 64

Zenith ............................................... 07, 23, 50, 129

I]_,,,"],,,"]_J [e,_ _

Toshiba ....................................................... 90

Hitachi/ Hughes .................................... 91, 99

Primestar .................................................... 92

Drake .......................................................... 93

Magnavox ............................................. 94, 95

Uniden ................................................... 94, 95

Optimus ................................................ 94, 95

Panasonic ................................................... 96

ProScan ...................................................... 97

RCA ............................................................. 97

SONY .................................................. 98, 105

•Due to changes in infra-red commands used by manufacturers, some brands have several

codes. If your unit does not respond to the first code, please try the next one.

• Some TV, Cable Box and DSS Receiver brands require you to turn on the power manually. 29

Search System

For each recording, an invisible index mark is placed on the tape. A program index and

information are also included for timer recordings. These marks are used to access or

scan recordings.

INDEX SEARCH

ENTER INDEX NUMBER :1

USING 1- 9 KEYS

FORWARD SEARCH:FF

REVERSE SEARCH :REW

NEXT :SEARCH

EXiT :STOP

Press SEARCH*

to display SEARCH

in Stop or Play

mode, and then

press NUMBER

keys

to select recording

number.

• To calculate

number, see below.

Press FF/SLOW+

or REW/SLOW- on

the remote to start

search.

INDEX SEARCH

FORWARDSEAROH :PF

REVERSESEARCH:REW

Play begins at

search end.

To search forward

or back 1 index,

press FF/SLOW+ or

REW/SLOW- on the

remote while

screen left is

displayed (10 sec.).

• To cancel, press

PLAY or STOP.

•To Calculate Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

NOTE: _ indicates start points of each recording.

Locates end point of recording for continuity.

Press SEARCH twice

to display SEARCH in Stop or Play

mode.

2 [ PROORAME"OSEARC"/

SEARCH START : FF

EXIT :SEARCN

Press FF/SLOW+

on the remote to

start PROG RAM

END SEARCH.

• To cancel, press

PLAY or STOP.

Examples of Program End Search.

the current ta eosrtion

Pros_BEAR__o.on End Point

the current t epos)tion

Press S EAI_I _1button

_[ { FP _[If search exceedsl

End Point r/a few seconds in [

[BLANK area. ]

Upon locating end point,

-_ search continues 7 sec. past end point,

-_ tape rewinds to 10 sec. before end point,

-_ tape plays to end point and steps.

• If Index Search is started very close to an • If Program End Search is started very close to

index mark, that index mark may not be an index mark, that mark may be skipped over.

counted in the search,

•Auto Play

Insert a tape -_- Power comes on,

-,- Play starts if no record tab

(see p. 6).

•Auto Rewind

Play _]

Fast Forward -_-Tape end -_- Rewind

•Play Auto Eject

(Repeat Play must be off)

Play -_ Tape end -_ Rewind

-_ Tape ejects if no record tab

VCR fast forwards (skips) over 1~3 minutes

of recorded tape.

1Press CM!ZERO in Play mode.

•The skip time can be changed by

pressing CM/ZERO repeatedly as

shown by the figure below.

PLAY

1st Press---_l min Skip

2nd Press---,-2 min Skip

3rd Press---,_3min Skip

• No indication appears on-screen.

Set to playback a recording over and over.

Press ACTION*

to display MENU.

2__. MENU

_ET CLOCK

SET UP CHANNEL

_DIOMNLANGUE:ENGLISH

VCR'S OUTPUT CH:3

SELECT:A • SET:SET

EXIT :ACTION

Press Ai,V

to select "SET UP VCR," and

press SET.

f sETu.... I Press &V

NG :ON/to select "REPEAT PLAY,"

AUTOSNOT-OFE:OF_ and press SET

to set "ON" or "OFF."

SELECT:A • SET: SET

END :ACTION

• Play repeats at tape end or if unrecorded portion

over 30 sec. is detected.

Press ACTION twice

to return to normal screen.

• For repeat play in DVD mode, see page 42.

To quickly return to a specified tape location.

Press DISPLAY during play

to display Counter.

PLA_,2:00AN Press COUNTER RESET

o:oo:oosP at desired position to reset

to "0:00:00".

Continue to record, playback etc.

Press STOP.

5.......... o:3o:3o0N021PressCM/ZEROinStopsP mode to start Zero Search.

41-

STOP 12:31AM CH 02 1

o:oo:oo

•DECK will go into FF or REW mode and stop

at the last point the Counter was set to 0:00:00.

_'T

_ cD (_3

CDCD_

r'n _ _ C3

DISPLAY

STOP

ACTION

SELECT

AV< P,"

SET

COUNTER

RESET

ACTION

SELECT

AY_

SET

When set to ON, all operations

except for timer record and tape

eject are prohibited. Useful for

households with small children.

[,.']lil'll_Q]J[i

To turn on, hold down REC on

DECK in Stop mode with no

tape inserted for 7 seconds.

(Please ignore "NO CASSETTE"

warning.)

I VCR LOCK ACTIVATED

To turn off, repeat above.

I VOB LOCK OFF

• VCR Lock cancels in 24 hours if

clock is set.

REC

When "ON," picture is displayed regardless of signal

strength.

Press ACTION

to display MENU.

SET UP VCR

SET CLOCK

: IOIO GUE : ENGLISH l.....

VCR'S OUTPUT CH:3

SELECT:AT SET:SET

EXIT : ACTION

Press AV

to select "SET UP

CHANNEL," and

press SET.

SETUPCHANNEL Press AV

ANTENNA : CABLE to select "WEAK SIGNAL

_ DISPLAY," and

_L_CT:,, SET:SETpress SET

/ ....... T,ON to set "ON" or "OFF."

• ON: Picture is displayed regardless of signal

condition, and may not always be clearly visible.

OFF: Screen turns solid blue when signal is weak or

non-existent.

• Selecting ON has no effect on connected equipment

with blue back feature.

Press ACTION twice

to return to normal screen.

The power shuts off at a preset time.

Press ACTION

to display MENU.

2--_ENU

_ET CLOCK

SETUP CHANNEL

IDIQMA!LANGUE:ENGLISH

VCR'S OUTPUT CH:3

SELECT:A • SET:SET

EXiT :ACTION

Press Air

to select "SET UP VCR," and

press SET.

SETUP vCR

REPEAT PLAY :OFF

,=rREMOTE WARNING :ON

SELECT:A • SET:SET

EXIT :ACTION

Press Air

to select "AUTO SHUT-OFF."

Press SET repeatedly to

change shutoff time as

shown below.

f----_ 2 Hours -----_

OFF 4 Hours

_,-- 6 Hours.q_-_

Press ACTION twice

to return to normal screen.

• The shut-off countdown will not function during Play or

Record. 33

If Multi-brand feature is used (p. 28), and this feature is

set to on, a warning appears whenever an invalid key

is pressed in TV, DSS or CABLE mode.

Press ACTION*

to display MENU.

2MENU

SET CLOCK

SET UP CHANNEL

_DIOMNLANGUE:ENGLISH

VCR'S OUTPUT CH:3

SELECT:A •SET:SET

EXIT :ACTION

Press ,&v

to select "SET UP VCR,"

and

press SET.

.... /REPEAT PLAY : OFF

SELECT:& • SET: SET /

EXIT :ACTION J

Press AV

to select

"REMOTE WARNING," and

press SET

to set "ON" or "OFF."

•If "OFF," remote warning will not appear

when invalid key is pressed.

Press ACTION twice

to return to normal screen.

If a remote control button does not work

when pressed, press the VCR button

on the remote and try the button again.

INPUT

STOP

PAUSE/

STILL

ACTION

SELECT

AV_f I_.

SET

TAPE

POSITION

REC

To find out the present tape position and amount of tape remaining.

Tape position is displayed for VHS-C Cassettes type, tapes

under 30 minutes, and some other tapes, but the position is

not correct.

PressTAPE POSITION

to detect current tape position.

LDETECTING TAPE POSITION

[_120 M_ N.

BEGIN END ,J

• "DETECTING TAPE POSITION" is displayed

only when a cassette is first inserted, and it

takes several seconds for correct tape

position to appear.

• The present tape position indication and

amount of tape remaining (according to

tape speed) is displayed.

• Tape remaining time display may not be

precise.

Press TAPE POSITION

to return to normal screen.

This function cannot display exact amount of tape remaining for

tapes 30 minutes or less, or for tapes over 120 minutes in length.

_i1_l_'.Tz1_FzYfi_[i_lF"J_1'E1l , .., ." i. ,,.llT"4L_';_rir.T.-T..]itt,.xa..]

Connection

VCR! Camcorder (Hi-Fi) D VD/VCR DECK TV Front of DECK

VIDEOIN2L-AUDIOIN2-R

O O O

(Audio/Video In Terminals

on the front of DECK are

available)

(_ Connect VIDEO OUT terminal on Playing VCR to VIDEO IN terminal on DECK.

To monitor the dubbing, also connect TV as shown.

(_) Connect "L" and "R" AUDIO OUT terminals on Playing VCR to "L" and "R"

AUDIO IN terminals on DECK.

In place of Playing VCR, you can use other equipment, such as a Camcorder.

Simply connect the unit's Audio/Video outputs to DECK.

Insert a pre-recorded tape. Insert a blank tape with record tab.

Press INPUT to set DECK Input mode to

LINE for Video Input.

(See "Selecting the Input Mode" below.)

Press PLAY, then PAUSE/STILL Press REC, then PAUSE/STILL

immediately to enter PLAY/PAUSE immediately to enter REC/PAUSE

mode. mode.

The operation of steps 4 and 5 must be done on both

playing and recording VCRs at the same time.

Press PLAY to start dubbing. Press PAUSE/STILL to start dubbing.

Playing VCR starts playback. DECK starts recording.

Press STOP to stop dubbing. Press STOP to stop dubbing.

•To Monitor Dubbing on TV

1 Turn TV on and tune to the Recording

VCR channel (CI-I 3 or CI-I 4).

2 Set the VCR/I-V Selector on DECK to

"VCR."

• Dubbing tapes protected with Copy

Guard will have poor quality results.

•Selecting the Input Mode

Method 1: Press INPUT repeatedly.

Channel Number*-* LINE1 *-* LINE2

Method 2: Press OH &/V.

Display will change as below.

,,,-_14-_24-_3 q

Press S' [ (CABLE) (TV)) Press •

",,_"_LINE2_-_LINE1_--_125 or 69_"_2'

• %1" or "L2" lights up on Multi Function Display

(about 4 seconds) when LINE1 or LINE2 is selected.

• LINE1: For rear audio/video connection.

LINE2: For front audio/video connection.

Caution: IUnauthorized exchanging and/or copying of copyrighted recordings may be_

Please note that some tapes cannot be dubbed on DECK. Also, it is not

possible to dub DVD/Video CD/CD to VHS tapes using DECK.

I_IP Ready Checklist

You can select a different subtitle language (if offered) than

the one set at the Settings for DVD Operation.

(See p. 45.)

Press SUB TITLE*

in Play mode to display

the subtitle selection

on-screen.

• Display disappears after

5 seconds.

• When no subtitles are offered,

"-" will be displayed instead of

the language number.

Press.,

to select a language.

Press • (or • )

to set.

Press AV

Tto select "ON" or "OFF."

Number of subtitle language being played back.

• If after several presses of the button the language does not

change, language selection is not offered on the disc.

• When power is turned on again or disc is removed, subtitles

revert to initialsetting language. If the initial language is not

recorded on the disc, the disc's priority language will appear.

IF;_TTii[--;-]m.'zo]=Ii[1 i | _[m] ,rilla_.l i[_ IS_[_ [:1111|_TA |J[o) al _•

You can change the audio soundtrack language, selected

at the Settings for DVD Operation, to a different language

if available. (See p. 45.)

(This operation works only with discs on which multiple

audio soundtrack languages are recorded.)

1Press AUDIO

in Play mode to display the

audio selection on-screen.

•Display disappears after

5seconds.

\Audio attribute 1 type,

sampling frequency, bit No. of

the disc.

2Press J,V

to select desired language.

Number of the audio soundtrack

language being played back.

[] Please read "Basic DVD Operation"

on p. 22.

[Subtitle language (No.)]

[Audio sound track language (No.)]

ENG English

FRA French

DEU German

ITA Italian

ESP Spanish

NLD Dutch

SVE Swedish

NOR Norwegian

DAN Danish

POR Portuguese

RUS Russian

JPN Japanese

CHI Chinese

KOR Korean

MAL Malay

VIE Vietnamese

THA Thai

Other

• Change the No. by pressing AV,

and press SET.

[Audio attribute I type, sampling

frequency, bit No. of the disc (see

p. 46.)]

96KHz

LPCM or

48KHz 124bit

C)olbyDigital lch - 5.1ch

DTS lch - 5.1ch

Linear PCM disc

Dolby Digital disc

DTS disc

• If, after several presses of the

AUDIO button the language does not

change, language selection is not

offered on the disc.

• When power is turned on again or

disc is removed, language reverts to

initial setting. If this language is not

recorded on the disc, the language

recorded will be heard.

WhenQappearson the screen while

a button is being operated, it means

that the corresponding operation is

prohibited by DECK or the disc.

ANGLE Indicator

•The ANGLE Indicator lights up on

DECK when a scene recorded at

different angles is detected.

• The angle number can be set

beforehand so that the angle is

switched whenever the ANGLE

Indicator lights up.

DVDs may contain scenes shot from multiple camera

angles allowing the same scene to be viewed at different

angles. You can view these angles, if available, using the

ANGLE button.

Press ANGLE

in Play mode to display the

angle selection on-screen.

• Display disappears after

5 seconds.

2I_ _m 1 Press ,kV

,:----_-_--- to select the desired

angle.

Number of angle being played back.

TITLE

• The subtitle cannot be enlarged nor

can it's position be changed.

•The picture zoom feature does not

work with a Video CD.

• During picture zoom, "ZOOM1" or

"ZOOM2" is displayed on-screen.

• Zooming, on some discs, may result

in poor picture quality, or may not

ooerate at all.

Press AUDIO in Play mode

to display the audio screen.

"°°'°.... _= I Press AW'(or 'd b,)

Ito select as shown below,

and

press I_ (or ,_) to set.

(DVD only)

SELEC'T :_ • S_T:_ET

. DVDKa_oke(1 vocal) VOCAL ON_VOCAL OFF

• DVD Karaeke(2 vocals)VOCAL Vl +V2_VOCAL V1_VOCAL V2_VOCAL OFF

• Video CD LR _ L_ R

[__J

You can enlarge specific portions of a picture and

select the zoom ratio using the ZOOM button during

DVD playback.

Press ZOOM repeatedly to change display

as follows.

• You can enlarge the center portion of the image

to one of 2 magnifications.

X1.0(ORIGINAL) X 1.5(ZOOM 1) X 2.0 (ZOOM2)

zr__-_ [

•Use the &, V, • and I_ buttons to move the position

up, down, left and right.

SomeDVDshavemorethanonetitle,e.g.movies.

Ifthediscoffersatitlemenu,youcanselectthedesired

titlenumber.(Operationmayvaryaccordingtothedisc.)

1TITLE MENU Press TITLE*

in Play mode

to display the title screen.

2TITLE MENU

Birds

of the world

Press AV_I • or

NUMBER keys

to select a title, and

press SETor PLA Y

to start playing.

•"Pressing SET or PLAY" is

not necessary when using

NUMBER keys.

[Wh]Lm ]

DVDs may offer a special menu. This menu may include

guides to unique contents, audio/subtitle languages, etc.

Although contents and operation may vary, the following

steps show basic steps for using the menu.

DVD MENU

I2-AUDIO I

I 3. ANGLE I

Press MENU

in Play mode to display

DVD MENU.

Press AV_I • or

NUMBER keys

to select an item, and

press SET or PLA Y

to perform.

• "Pressing SETor PLAY" is

not necessary when using

NUMBER keys.

Repeat step 2 if there is

more than one menu.

_i1_l_'.Tz1_FzYfi_[i_lF"J_?E1l , .., ." i. ,,.llT"4L_'i_Tir.T.-T..]itt,.xa..]

PLA Y

STOP

NUMBER

keys

CLEAR

SELECT

AV<b"

T/TLE

_0]i[_._. _] Lfll[_ IIP_VfIPJLolllJJL_oJ_l][OJ_l]lfll[q Ii[_Ln[o]l_=Jl_l.iLa_J ll_v_l_l[q _llljJL_oJ_l] _l.liR

You can program specific tracks and order of play.

Press ACTION

to display MENU.

I DVDMA,NMERU / Press AV

D,soLANGUAGES to select

AUDIO OUTPUT

STILL MODE :FIELD

TV MODE :Letterbox 4:3 "PLAY MODE," and

PARENTAL LOOK :LEVEL 8 mP press SET

L SELECT:'" to display.

SET : SET

END : ACTION

_Press AV

to select

"PROGRAM PLAY,"

and

press SETto display.

'IPRoG......Press..,,

DISC PROGRAM

[] e ,, _6 6 8 to select a track

2 7 42 17 15 6

3 8 43 16 1 13

4 9 14 19 3 2 number (Track

5 10 15 26 2

CLEARLAST numbers on disc are

CLEAR ALL START

SELEC...... displayed.), and

SET : SET

END :ACT,ON press SET.

•Repeat step 4 to select another track.

•The selected track is added on the right side.

DISC PROGRAM

N 6 11 16 5 8

2 7 12 17 15 E

3 8 13 18 1 43

4 9 14 19 3 2

5 10 15 26 2

CLEAR LAST

CLEAR ALL

SELECT :• v 4 • /

SET : SET

END : ACTION

Press AV4 •

to select "START," and

press SETto start play

of programs in the

sequence selected.

• To cancel, press STOP

during play, then press

CLEAR.

• Up to 15 tracks can be programmed.

• "4" or "•" (depending on disc) indicates additional

PROGRAM PLAY screen.

Press AV< • for next or previous screen.

• To clear the last program one by one

Press AV41 • to move to "CLEAR LAST" and

press SET. (Pressing CLEAR on remote control

also clears last program.)

• To clear all programs

Press AV4 • to move to "CLEAR ALL" and press

SET. (Programs are also cleared when the power

is turned off or the disc is removed.)

I_ Ready Checklist

[] DECK is in DVD mode, press DVD.

[] Video CD or CD is inserted.

Do operation steps 1 through 5

at left on this page.

Press DISPLA Y to display Disc

Information screen.

(Disc Information Screen)

4:35:12

SET :SET NEXT:DISPLAY

Press DISPLAY to display

DECK Information screen.

Press SETto enter Select mode.

"REPEAT OFF" will flash.

(DECK Information Screen)

PROGRAM PLAY

SET :SET END : D_SPLAY

Press AV to select "DISC

REPEAT."

(DECK Information Screen)

PROGRAM PLAY

SELECT:A •

SET : SET END : D_SPLAY

Press SETto set mode. ("DISC

REPEAT" will stop flashing.)

To cancel, select "REPEAT

OFF" in step 5, then press SET.

Tracks are played in a random order.

Press ACTION*

to display MENU.

o,scLANGUAGES to sele ct "F

AUDIO OUTPUT

ST_LL MODE :FIELD

TV MODE :Letterbox 4:3 and

PARENTAL LOCK :LEVEL 8 .P

....... _'_' pness SE1

SELEOT:'" to display.

SET : SET

END : ACTION

to select "PLAY MODE,"

press SET

PLAY MODE

EcT

Press 4,V

to select

"RANDOM PLAY," and

press SET

to begin random play.

•To cancel, press STOP

during play, then press

CLEAR.

Audio recorded on a DVD or Video CD often incorporates

a dynamic range of sound.

This means that, when compared to a music CD, etc.,

the average volume is generally lower and the peaks

may be higher. This unit can be set so that the average

volume is increased automatically.

I_ Ready Checklist

[] DECK is in DVD mode, press DVD.

*Important:

If a remote control button does not

work when pressed, press the

DVD button on the remote and try

the button again.

_ GD (3D

oo _

_ee0

STOP

CLEAR

ACTION

SELECT

AV_fP_

_SET

AUDIO

CONTROL

Press AUDIO CONTROL repeatedly to change "ON" *-* "OFF."

• "ON" or "OFF" lights up on Multi Function Display (about 3 seconds) when

press AUDIO CONTROL.

Audio Control "OFF" Audio Control "ON"

Volume level is increased

DVD/Video CD Volume level is low. automaticallywhen played back.

Music CD

• "ON" is set ..... When a DVD or Video CD is played back, the average volume is increased.

• "OFF" is set .... The volume level recorded on the disc is played back just as it is.

• When audio equipment is connected, setting the Sound Output level to "OFF" is recommended.

• If the sound becomes abnormal while playing a disc, set the Sound Output level to "OFF."

When DISPLAY is pressed, On-Screen Displays show

disc information (title/chapter/track number, elapsed

playing time) and DECK information (repeat play, play

mode).

Press DISPLAYin Play or Stop mode

to display "On-Screen Displays."

• Each press of DISPLAY changes the on-screen

display as follows. (refer to p. 42.)

I Selected disc information

Selected DECK information

Normal Screen

DISPLAY button does not function while DVD

TITLE MENU is displayed.

Press &_!' (or • I_)

to select an item, and

press SET.

Press &V

to select the setting, and

press SET.

....1

_s[ SELECT:• •

SET :SET NEXT:DISPLAY

VIDEO CD

PBC :OFF 0:12:34

SET ; SET NEXT ; DI SPLAY

• For some functions the

setting will be registered

immediately without

pressing SET.

• When numbers are

displayed (e.g. title

number), NUMBER keys

are also available.

To make corrections,

press AV and SET

repeatedly to move to

the error, then correct.

•Pressing•is effective

for elapsingtime

insteadof the above

buttons. Press •

repeatedlyto delete the

error, then correct.

To return to normal

screen,

press CLEAR or

DISPLA Y repeatedly.

_ll_ Ready Checklist

[] DECK is in DVD mode, press DVD.

DISPLA Y

NUMBER

ke_

CLEAR

SELECT

AV•P_

SET

• When DISPLAY button is

pressed during playback of a

Video CD with Playback control,

NUMBER keys are not available

on the displayed screen. In this

case, press DISPLAY again to

remove the displayed screen.

• When Q appears on the screen

while a button is being operated,

it means that the corresponding

operation is prohibited by DECK

or the disc.

•Disc information screen (for DVD)

1. TITLE No.

• Change the No. by pressing AV* or NUMBER keys, and press SET.

2. Chapter No.

• Change the No. by pressing A_!' or NUMBER keys, and press SET.

3. Disc currently being played

4. Elapsed playing time

The screen may be changed by selecting the elapsed time.

•Change the elapsed time by pressing NUMBER keys.

e.g., press0-1 -2-3-4-5for01:23:45.

•This function does not work with some discs.

•Disc information screen (for Video CD/CD)

A.Track No.

• Change the No. by pressing At' or NUMBER keys, and press SET.

B. Playback control ON/OFF

[Video CD with playback control only]

ON Video CD menu play is displayed.

OFF Video CD menu play is cleared.

C. Disc currently being played

IVideoCDI CD J

D. Elapsed playing time

SELECT:& •

LSET :SET NEXT: I

• Track No. and the elapsed playing time are not displayed during play started from menu of Video

CDs with playback control.

• When Q appears on the screen while a button is being operated, it means that the corresponding

operation is prohibited by DECK or the disc.

•DECK information screen (for DECK) [ ]

• Change the desired mode during play by pressing AV, and press SET. a//

a. Repeat Play

tovo LO" TERRE E TtT'TLE t

Video CD/CDJ _ R-EP--E-AT DISC REPEAT JREPEAT OFF L_EETLECT::'_E'_"..........

b. Play mode [Video CD/CD only] (See p. 39 or 40.) PLAY

l- 1

PROGRAM PLAY program play b _ANooMPLAY

RANDOM PLAY random play

normal play

_SET :SET END :DISPLAY

•CHAPTER/TITLE REPEAT PLAY (DVD)

CURRENT PLAYBACK POSITION

TITLE

chapter chapter chapter

CHAPTER REPEAT _ --

TITLE REPEAT _-_

NORMAL PLAY

•TRACK/DISC REPEAT PLAY (Video CD/CD)

CURRENT PLAYBACK POSITION

TRACK REPEAT

DISK REPEAT

NORMALPLAY

track track track

O• For repeat play in VCR mode, see p. 32.

lie] I;. [,.$'] _-1P,Ii[_;-! i] [t_, k"[_-I ,_.|lli |;{l[I]P.i Ii [] _!'___ [__[I'jP,[,";f_I[ o] ilk'It4 i[| 1€ i i P,II II (oNKe] i_'-']! Ii iT;] |l] I[OI! [rr_ B[_I l?,li_, _.--[.e]il[_[Ke]

You can use this unit to play MP3 format audio recorded for

personal use with a computer etc. onto a CD-R or CD-RW.

Play may not be possible in some cases due to the

condition of the recording.

Press POWER the remote DECK.

on or

Press OPEN/CLOSE,

and then place a MP3 disc into the disc tray.

Press OPEN/CLOSE to close.

MP3 MENU is displayed and playback is

started automatically. (The MP3 CD directory is

displayed.)

Function /Counter

•MP3 playback (During STOP mode)

1) Press AT to select an MP3 file (FJ).

2) Press SETor PLAYto start playback.

Folder area

(The currently

displayed folder J

•Select folder (During STOP mode)

1) Press _l,V to select a folder (_1).

2) Press SETto display files/folders

contained in the folder.

Select parent folder (During STOP

mode)

1) Press _I,V to select a folder (_).

2) Press SETto make changes to

the previous directory display.

Status\ <Example> _Parent O

PLA¥ MP3M_,_ folder • Folderarea operationcannot be done.

/ I On,yfilearea operation is possible.

/ _POPS J]NC_TURNE I

_[°JAzz _No_ _File area • Select PLAY MODE (During STOP

/ _ (Theselected mode)

turnsgreen) L P_Y MO_E:NOR_L J MP3file/folder 1) Press • • to move cursor to

isdisplayed PLAY MODE.

<Example> withacursor.)

_m_ PLAY MODE 2) Press a,V to select the desired

, 5VA =[_ : MP3 file

I J_ENDWALTZ ['_ : Folder

IJ_DD..CUB I C

, J_NOCTURNE ['_ : Parent folder

I J_NORN

, _TEGHNO

i 5 POPS

' _JAZZ

(The MP3 CD directory structure

displayed in the above example OSD

is shown in the diagram at left.)

•Forward/Reverse Search

Press FF/SLOW+ or REW/SLOW-during play.

Press PLAY to release.

•Search speed, slow at first, increases with each

additional press of the button up to 4 levels.

•ForwardlReverse Track Skip

Press SKIPmHIH or 141_ SKIP during play.

Each press skips a track.

•If pressed within first 3seconds of playback, skips

to the previous track. If over 3 seconds, returns to

first of that track. (1_1_ SKIP only.)

• Only the SKIP _H_I or I_HI SKIP button can be used

for track skip selection during playback.

Place unit into Stop mode before performing folder/

file selection (see above right.)

PLAY MODE (see below).

[PLAY MODE]

NORMAL:

All MP3 files are selected and

played back one time only.

SINGLE REPEAT:

The selected MP3 file is

played back repeatedly.

FOLDER REPEAT:

The MP3 files contained in

the selected folder are played

back repeatedly.

However, folders below the

selected folder are not played

back.

DISC REPEAT:

All MP3 files are played back

repeatedly.

Press STOPto stop playing.

Press OPEN/CLOSEto eject the disc.

The MP3 MENU is closed automatically.

You can prevent playback of DVDs of a specific

rating level which may be unsuitable for children.

• Some DVDs are encoded with a rating level. If the disc

rating is higher (stricter) than the one you preset,

playback will be prohibited.

_IP Ready Checklist

[] DECK is in DVD mode, press DVD.

A 4-digit code must be entered to view a blocked

program or change rating settings.

Press ACTION*

to display MENU.

/ o......... u 1 Press AV

DISC LANGUAGES

AUo,OOUTPUT to select "PARENTAL LOCK,"

STILL MODE :FIELD

press SETto display.

/......... /

SET : SET

END :ACTION

ENTER 4-DIGIT CODE

END :ACTION

ENTER :0-9

To Make Corrections

Press • repeatedly to

move the cursor.

Press NUMBER keys to

make the correction.

1) Press NUMBER keys

to enter your secret code.

2) Enter same secret code

again for confirmation.

3) Press SETto display.

• Step 2) not necessary when

changing rating or secret

code.

• Take care that you are not

observed entering the

secret code.

1I_RENTALLOCK

_.P LEVEL 4 mP

LEVEL7 .P LEVEL 3.P

LEVEL6 -P LEVEL 2 .P

LEVELS -P LEVEL 1 .P

LEVEL0 ,._

HOuurr

SELECT : AV'< •

SET : SET

END :/_'11ON

Press AV<I •

to select rating level, and

press SET

to select "LOCKED" or

"UNLOCKED."

LEVEL 0 : LOCK ALL, Playback of all DVDs, CDs and

Video CDs is prohibited.

(Use to prohibit play of mature theme DVDs not

encoded with rating level.)

LEVEL 1 : mature theme DVDs

LEVEL 2 : DVDs expressly for children can be played back.

LEVEL 3 to 7 : DVDs for general audiences/children can be

played back. (DVDs with mature content

are prohibited.)

LEVEL 8 : NO LIMIT: (Factory preset)

All DVDs can be played back.

Discs not encoded with rating

level will play even if the jacket

states it is for mature

audiences. For these discs, the

DVD Lock Ratings will not work.

//.......................

PLAYER'S RATING LIMIT

DO YOU WANT TO CHANGE THE

LIMIT? m

SELECT:A •

SET :_ET END :DISPLAY

After DVD Lock is set and a

blocked DVD is played, this

message will appear.

The message may differ

depending on the disc.

To continue viewing a blocked

program for now,

Press Ay to select "YES" and

SET. Then, enter your 4 digit

secret code. When "NO" is

selected, blocked programs

cannot be viewed.

Change your secret code

• You will need your current code.

Do step 1 -2 left.

Enter current secret code.

Press CLEAR to clear the code.

Do step 4 to enter new code.

Press ACTION twice

to end setup.

Press ACTION

to display MENU.

21...........Press..

',_UDIO()_T to select an item, and

STILL MODE :AUTO

................... press SET.

PARENTAL LOCK :LEVEL 8_ 1_

SELECT : • •

SET : SET

ND :ACTION

DISC LANGUAGES (See below)

All languages offered on the disc can be set.

If the language not offered is set, the original disc

language will be selected.

AUDIO OUTPUT (See p. 46.)

You can set the audio output that comes from the

digital audio output terminal.

STILL MODE (See p. 47.)

To select "FIELD" (Field still) or "FRAME" (Frame

still) to prevent jitter or make small text or fine

patterns clearly visible in a still picture. When

"AUTO" is set "FIELD" or "FRAME" is selected

automatically.

TV MODE (See p, 47.)

To select whether the video material for a wide-

screen will be played back in the Pan & Scan style,

Letterbox style or 16 : 9 style.

To select and set the language of the audio

soundtrack, subtitles, or title/DVD menus for all discs

to be played.

3[.............../P,ess--

..........'_" to select

AUDIO OUTPUT

STILL MODE :AUTO

TV MO ......... "1 I1_

PARENTAL LOCK :LEVEL 8,,r and

SELECT : • •

SET : SET

END :ACTION

"DISC LANGUAGES,"

press SET

to display screen.

SELECT : • •

SET : SET

END : ACTION

Press AV

to select an item, and

press SET repeatedly

for desired language.

(Please refer right.)

Press ACTION to redisplay DVD menu

and go to step 2 to setup another item.

Or, press ACTION twice to exit.

Once initial settings are done, they

remain in memory (even after power off)

until changed. This means DECK will

operate under the same conditions

(especially DVDs) each time.

[_ Ready Checklist

[] DECK is in DVD mode, press DVD.

"AUDIO" selections

(Factory preset: English)

To select the audio soundtrack language.

English/Spanish/French/Japanese

Original: Original disc language

OTHER _: Other language selection *_

"SUBTITLE" selections

(Factory preset: AUTO)

To select the subtitle language.

AUTO: Same language selected

for "AUDIO"

• If language set for "AUDIO" is used in

playback, subtitles will not appear.

• If another language is used during

playback, the subtitles will appear

in the language selected at "AUDIO"

setup.

English/Spanish/French/Japanese

OTHER _: Other language selection *_

"MENUS" selections

(factory preset: English)

To select the language used in title

menus or DVD menus.

English/Spanish/French/Japanese

OTHER _: Other language selection *_

To enter OTHER _*** code

number,

Press NUMBER keys (Please refer to

language codes on p. 48).

To make corrections, press •

repeatedly to delete language code

number, and correct.

*_ If the selected language is not offered,

the original disc language is selected. 45

,&tlr_Jt'_J[e]Ir_

Select the digital output to be output from the optical

digital audio output connector of DECK.

Press ACTION*

to display MENU.

2DVD MAiN MENU

,£Lsc_N_UAaES

"_-)LL MCf£,E :FSLED

TV MODE :Letterbox 4:3

PAR_+NTAL LOCK :LEVEL 81_

SELECT : • •

SET : SET

Press AIr

to select

"AUDIO OUTPUT,"

and

press SET

to display screen.

Dl_,M#ylf+_OJ'ig,tat :S,tst .... to select an item,

dts : OFF

D_C :OFF a n d

susSOUNO :OFF press SET

SELECT:•- repeatedly for

SET : SET

E,o :,,OT,_ output. (See below.)

• "LPCM (DVD)" selections

OFF: Linear PCM of less than 48 kHz/16 bit is

output. When playing DVDs recorded in

linear PCM of over 48 kHz/20 bit or 96 kHz,

no digital audio is output. (Factory preset)

POM: When playing DVDs recorded in linear PCM

of 48 kHz/20 bit/24 bit or 96 kHz, digital

audio converted to 48 kHz/16 bit is output.

(Digital output of PCM audio is restricted to

48 kHz/16 bit or below for copyright

protection.)

• "Dolby Digital" selections

Bitstream: Dolby Digital bitstream (lch-5.1ch) is

output. (Factory preset)

OFF: No output.

• "dts" selections

Bitstream: dts bitstream is output. (Factory preset)

OFF: No output.

• "DRC (Dynamic Range Compmssion)"selections

OFF: Normal audio range is selected. (Factory

preset)

ON: For dynamic sound even at low volume, this

is useful for late-night listening. [Dolby Digital

DVDs only].

• "SURROUND" selections

Surround Sound creates the effect of sound coming

from non-existent rear speakers even when only

connected to a 2-channel stereo system.

OFF" No Surround Sound effect. (Factory preset)

ON: Surround Sound effect.

Press ACTION to redisplay DVD menu

and go to step 2 to setup another item.

Or, press ACTION twice to exit.

[_ Ready Checklist

[] DECK is in DVD mode, press DVD.

Recommended setting

Type of amplifier

to be connected LPCM Dolby dts

(DVD) Digital

Noamp((f(erisconnected OFF OFF OFF

AV amp{ifier(with d(gita{

audio input connector) PCM, 1 OFF,2 OFF,2

without Dolby Digital/dts

decoder

AVamplifierincluding PCM.1 Bitstream OFF

Dolby Digitaldecoder

AVamplifierincluding

DolbyDigital/dtsdecoder PCM.1 Bitstream Bitstrea.3

• Make settings according to amplifier

connected to optical audio output as shown

in above table.

When a dts decoder is not connected, to

enjoy dts DVD, please select audio output

other than dts at the dts DVD menu screen.

Otherwise, there will be no sound.

"1 Audio Output 2 from DECK is converted to

48 kHz/16 bit in addition to audio from

digital audio output.

To enjoy high quality sound at 48 kHz/20

bit/24 bit or 96 kHz, connect the amplifier

or decoder directly to the Audio Output 2

connectors, not to the Digital Audio Output

connector. [Select "OFF" at the "LPCM

(DVD)".]

*2 When connecting an amplifier (with an

optical digital input connector) which does

not contain the Dolby Digital or dts

decoder, be sure to select "OFF".

If "Bitstream" is selected, starting DVD play

may cause such a high level of noise as to

be harmful to your ears and damage the

speakers.

*3 When a dts decoder is connected, please

select "Bitstream" in "dts'. If "OFF" is

selected, there will be no sound.

• Turn off other surround effects when using

this surround effect.

• For optimum effect, the distance between

DECK and the listener should be about 3 or 4

times the distance between the right and left

front speakers.

Set to reduce jitter ina displayed still picture or a motion

picture.

Press ACTION

to display MENU.

[ DvoMA_.ME.U Press AV

D,SC_,GUAGES to select "STILL MODE."

AUDIO OUTPUT

" and

TV MODE :Letterbox 4:3

PA,,,TA_LOCK:,EVEL0._ press SET repeatedly

s........ for mode. (See below.)

SET : SET

END : ACTION

AUTO: "FIELD" (Field still) or "FRAME" (Frame still) is

automatically selected during the still mode.

(Factory preset)

FIELD: "FIELD" (Field still) is always selected.

This setting will reduce jitter when compared

with "AUTO" on some discs.

FRAME:"FRAME" (Frame still) is always selected.

Some texts and fine patterns will be seen clearly

when compared with "AUTO" on some discs.

Press ACTION

to exit this mode.

Set the screen display style for wide-screen video

material playback.

Press ACTION

to display MENU.

2i- /

DVDMA,.ME.U Press &V

D,SCL_,GUAGES to select "TV MODE,"

AUDIO OUTPUT

ST%:MO....... _...... and press SET

P_,E.TA_LOCK_L_WL0._ repeatedly for mode.

s........ (See below.)

SET : SET

ND : ACTION

Pan & Scan 4:3 (Factory preset) :

Wide-screen video data is played in Pan & Scan

style (left and right of screen is trimmed.)

• Video data not formatted in Pan &Scan will play

in letterbox style.

Letterbox 4 : 3 :

Wide-screen video data is played in Letterbox

style (top and bottom of screen has black margin).

16:9:

Set "16: 9" when using Wide-screen TV.

Press ACTION

to exit this mode.

• Pan & Scan (Factory preset)

• Letterbox

Enter the appropriate code number for the initial settings "AUDIO", "SUBTITLE" and/or

"MENUS" (see p. 45).

Code Language

6565 Afar

6566 Abkhazian

6570 Afrikaans

6577 Ameharic

6582 Arabic

6583 Assamese

6588 Aymara

6590 Azerbaijani

6665 Bashkir

6669 Byelorussian

6671 Bulgarian

6672 Bihari

6678 Bengali;Bangla

6679 Tibetan

6682 Breton

6765 Catalan

6779 Corsican

6783 Czech

6789 Welsh

6865 Danish

6869 German

6890 Bhutani

6976 Greek

6978 English

6979 Esperanto

6983 Spanish

6984 Estonian

6985 Basque

7065 Persian

7073 Finnish

7074 Fiji

Code

7079

7082

7089

7165

7168

7176

7178

7185

7265

7273

7282

7285

7289

7365

7378

7383

7384

7387

7465

7473

7487

7565

7575

7576

7577

7578

7579

7583

7585

7589

7665

Language

Faroese

French

Frisian

Irish

Scots Gaelic

Galician

Guarani

Gujarati

Hausa

Hindi

Croatian

Hungarian

Armenian

Interlingua

Indonesian

Icelandic

Italian

Hebrew

Japanese

Yiddish

Javanese

Georgian

Kazakh

Greenlandic

Cambodian

Kannada

Korean

Kashmiri

Kurdish

Kirghiz

Latin

Code

7678

7679

7684

7686

7771

7773

7775

7776

7778

7779

7782

7783

7784

7789

7865

7869

7876

7879

7982

8065

8076

8083

8084

8185

8277

8279

8285

8365

8368

8372

8373

Language

Lingala

Laothian

Lithuanian

Latvian,Lettish

Malagasy

Maori

Macedonian

Malayalam

Mongolian

Moldavian

Marathi

Malay

Maltese

Burmese

Nauru

Nepali

Dutch

Norwegian

Oriya

Panjabi

Polish

Pashto, Pushto

Portuguese

Quechua

Rhaeto-Romance

Romanian

Russian

Sanskrit

Sindhi

Serbo-Croatian

Singhalese

• f

Codel

83751

83761

83771

83781

83791

83811

83821

83851

83861

83871

84651

84691

84711

84721

84731

84751

84761

84791

84821

84841

84871

85751

85821

85901

86731

86791

87791

88721

89791

90721

90851

Language

SIovak

SIovenian

Samoan

Shona

Somali

Albanian

Serbian

Sundanese

Swedish

Swahili

Tamil

Telugu

Tajik

Thai

Tigrinya

Turkmen

Tagalog

Tonga

Turkish

Tatar

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

VolapQk

Wolof

Xhosa

Yoruba

Chinese

Zulu

These displays will alert you to a missed operation or provide further instructions.

PLEASE SET CLOCK BY

PRESSING ACTION KEY

PLEASE PREPARE FOR TIMER

REC

CHECK CASSETTE

RECORD TAB

NO CASSETTE

TO CANCEL TIMER REC

HOLD DOWN STOP KEY

FOR APPROX 3 SEC

VIDEO HEADS MAY NEED

CLEANING PLEASEINSERT

HEAD CLEANING CASSETTE

OR REFER TO MANUAL

END :PLAY

VCR LOCK ACTIVATED

REMOTE CONTROL IS SET

TO CABLE/DSS MODE

USE VCR : VCR KEY

USE DVD : DVD KEY

REMOTE CONTROL IS SET

TO TV MODE

USE VCR : VCR KEY

USE DVD : DVD KEY

PLEASE CHECK THE DISC,

AND FOR STAINS OR

SCRATCHES ON DISC

If you attempt to set or review a Timer

Recording and the Clock is not set...

If DECK is not in Stop mode or a cassette

with record tab is not inserted 2 minutes

before a Timer Recording is about to

begin...

If you press REC on the remote control or

DECK, and a cassette is inserted with no

record tab...

If you press PLAY, FF, REW, or REC on

the remote control or DECK without a

cassette inserted...

If you press STOP or POWER

during a Timer Recording...

(visible in VCR mode only)

If head cleaning becomes necessary

while playing back a tape...

If you press a function button other than

STOP/EJECT or POWER while DECK is

in VCR Lock mode...

If you press an invalid key on the remote

while in CABLE/DSS mode...

If you press an invalid key on the remote

while in TV mode...

If you press PLAY, or DECK reads

data from a stained or scratched disc

in DVD mode. Also, if the type of disc

is other than DVD, Video CD or CD...

IT IS PROHIBITED TO COPY If you press REC in DVD mode... 21

DVD/VIDEO CD/CD TO VHS

Check the following points if you are having trouble with your DECK.

[_eTII

No power...

Power turns itself off...

TV program cannot be recorded...

Timer recording cannot be

performed...

There is no playback picture, or the

playback picture is noisy or contains

streaks.,.

Special effects playback, picture may

contain some vertical jitter when using

a TV with an Automatic Vertical Hold

Control...

DECK cannot be controlled...

DECK cannot be remote controlled...

PROG buttons do not respond...

• Completely insert Power Plug into an AC outlet.

• Set POWER button to on.

• Make sure power source is active.

• Auto power-off (shutoff) occurs after about 5 rain.

in DVD mode with no operation, or if there is no

broadcast signal in TV or Playback mode.

Turn the power back on. (pp, 23, 33)

Check connections between DECK, external

antenna, and TV.

Check channel selections.

Make sure your antenna system (CABLE or TV) is

correctly set. (Channels [p. 18])

Make sure cassette record tab is intact. (p. 6)

Confirm that clock is set to current time and date.

Make sure Cable/DSS box (if used) is left on and

tuned to channel to be recorded.

Set recording start/stop times correctly. (p. 24)

Timer recording may not be performed or continued

ff a power interruption occurs before or during a

Timer Recording, even after power is restored.

Select channel 3 or 4 on TV to match VCR output

channel (3 or 4) (p. 16) or select LINE.

Set VCR/TV selector to "VCR."

Adjust TRACKING control in either direction. (p. 6)

Try Head Cleaning. (p. 6)

Set TV's Vertical Hold Control to MANUAL, then

adjust.

• Make sure DECK power is on.

• Check Remote batteries.

• Make sure VCR LOCK is set to off. (p. 33)

• Make sure Remote is in proper mode.(p. 28)

• Make sure Timer Recording is not in progress.

• Make sure DECK power is on.

• Make sure Remote is in VCR mode.

• Aim Remote Conlrol direct}yat remote sensor on DECK. (1:).9)

• Avoid any object blocking signal path.

• Check Remote batteries. (p, 4)

• Exposing DECK remote sensor to direct fluorescent

or outdoor light may cause signal interference.

• PROG functions are not available in COMPONENT

Video Output and S-VIDEO OUT. Set TV to either RF

IN or VIDEO IN. (p. 10)

•Check Remote batteries. (p. 4)

• Press VCR or DVD button for DVD/VCR mode. (p. 28)

Check the following points if you are having trouble with your DECK.

Play fails to start even when PLAY is

pressed...

Play starts but then stops immediately...

Picture is distorted during rapid

advance or rapid reverse...

No Forward/Reverse Scene Search

play...

Play does not start even when title is

selected...

Audio soundtrack and/or subtitle •

language is not the one selected at

the initial settings...

No subtitles... •

Alternative audio soundtrack •

(or subtitle) language cannot be

selected... •

Angle cannot be changed... •

Programs cannot be viewed on TV...

Video cassette cannot be inserted... •

Video cassette ejects when •

a recording is started or the power is

turned off for timer recording...

This DECK cannot play discs other than DVDs,

Video CDs and CDs.

The disc may be dirty and require cleaning.

Be sure disc is installed with label side up.

The picture will be somewhat distorted at times:

this is normal.

Some discs may have sections which prohibit

Forward/Reverse Scene Search. (p. 23)

Confirm the "DVD LOCK" setting. (p. 44)

If the audio soundtrack and/or subtitle language

selected at DVD initial settings does not exist

on the disc, it will not be accessible.

Subtitles appear only when available on disc.

"OFF" is selected at the changing subtitle

language. Select "ON" at the "Subtitle Languages"

section (p. 36) to display the subtitles.

Alternative language cannot be selected with discs

which do not contain more than one language.

For some discs, alternative language cannot be

selected with the AUDIO or SUB TITLE button.

Try selecting it from the DVD MENU if available.

This function is dependent on software availability.

Even if disc has multiple angles, they may be

recorded for specific scenes only (ANGLE

indicator on DECK lights up). (p. 37)

Make sure TV is set to output of DECK.

Check connections between DECK,

external antenna, and TV.

Set VCR/TV selector to "TV." (p. 21)

Make sure proper signal source is selected.

Insert the cassette with window side up; record

tab facing you.

Make sure cassette record tab is intact. (p. 6)

In Stop mode, the motor (CYLINDER)

continues to rotate...

The disc cannot be removed..

• To enable Quick play mechanism, the cylinder will

rotate for about 3 minutes. This reduces response

time from Stop to Play mode.

• First, unplug DECK. Then, prepare a rigid wire

(e.g. an extended paper clip) and, applying

moderate force, insert it straight into the hole at the

base of the tray. The tray will eject a little. Now, pull

the tray all the way out and remove the disc. (p. 9)

If you cannot resolve the problem, please call the Customer Call Center for product

assistance at 1-800-211-PANA (7262).

To locate an authorized servicenter, please call toll free 1-800-211-PANA (7262).

or send e-mail to : consumerproducts@ panasonic.com 51

Customer Orders Only 800-332-5368 (Customer Orders Only)

Panasonic Services Company 20421 84th Avenue South, Kent, WA 98032

(6 am to 5 pm Monday - Friday; 6 am to 10:30 am Saturday; PST)

(Visa, MasterCard, Discover Card, American Express, Check)

CALIFORNIA

6550 Katella Avenue

Cypress, CA 90630

800 Dubuque Avenue

S. San Francisco,

CA 94080

3878 Ruffin Road

Suite A

San Diego, CA 92123

FLORIDA

3700 North 29th Avenue

Suite 102

Hollywood, FL 33020

GEORGIA

8655 Roswell Road

Suite 100

Atlanta, GA 30350

ILLINOIS

1709 North Randall Road

Elgin, IL 60123

MASSACHUSETTS

60 Glacier Drive

Suite G

Westwood, MA 02090

MINNESOTA

7850-12th Avenue South

Airport Business Center

Bloomington, MN 55425

OHIO

2236 Waycross Road

Civic Center Plaza

Forest Park, OH 45240

PENNSYLVANIA

2221 Cabot Blvd. West

Suite B

Langhorne, PA 19047

TEXAS

13615 Welch Road

Suite 101

Farmers Branch,

TX 75244

WASHINGTON

20425-84th Avenue

South

Kent, WA 98032

HAWAII

99-859 Iwaiwa Street

Aiea, Hawaii 96701

Phone (808)488-1996

Fax (808)486-4369

As of Sep. 2001

Panasonic Consumer Electronics Company, Panasonic Sales Company,

Division of Matsushita Electric Corporation Division of Matsushita Electric of Puerto Rico, Inc.

of America, One Panasonic Way AVE. 65 de Infanterfa, Km. 9.5 San Gabriel

Secaucus, New Jersey 07094 Industrial Park, Carolina, Puerto Rico 00985

PANASONIC/QUASAR Video Products

Limited Warranty

Panasonic Consumer Electronics Company or Panasonic Sales Company (collectively referred to as "the Warrantor")

will repair or replace this product with new or refurbished parts or equivalent product, free of charge, in the USA or

Puerto Rico, in the event of a defect in materials or workmanship as follows (all time periods commence from the date

of the original purchase):

PRODUCT PARTS

CAMCORDER ONE (1) YEAR, EXCEPT

CCD IMAGE SENSOR

-SIX (6) MONTHS

DVD/VCR DECK ONE (1) YEAR

ONE (1) YEAR, EXCEPT

DIGITAL STILL CCD IMAGE SENSOR

CAMERA CCD IMAGE SENSOR

-SIX (6) MONTHS

A/V MIXER ONE (1) YEAR

TV/VCR, TV/DVD ONE (1) YEAR,

TV/DVD/VCR EXCEPT CRT

COMBINATION CRT-TWO (2) YEARS

TV/HDR ONE (1) YEAR,

COMBINATION EXCEPT CRT

CRT-TWO (2) YEARS

LABOR

NINETY (90) DAYS

CRT- NINETY (90) DAYS

SERVICE CONTACT NUMBER

Carry-In or Mail-In 1-800-211-PANA(7262)

Carry-In or Mail-In 1-800-272-7033

1-800-211-PANA(7262)

Carry-In or Mail-In

Carry-In: 21" CRT

and Smaller

In-Home or Carry-In:

22" CRT and Larger

In-Home or Carry-In

NINETY (90) DAYS 1-888-843-9788

CRT- NINETY (90) DAYS

Batteries (if included) - New rechargeable batteries in exchange for defective rechargeable batteries for ten (10)

days. Non-rechargeable batteries are not warranted.

"laDe (if included) - New video cassette tape in exchange for a defective video cassette tape for five (5) days.

Memory cards (if included) - Exchange defective item for new one for ninety (90) days.

In-home, carry-in or mail-in service, as applicable, in the USA can be obtained during the warranty period by

contacting a Panasonic Services Company (PASC) Factory Servicenter listed in the Servicenter Directory. Or call toll

free contact number listed above, to locate an authorized PASC Servicenter. Carry-in or mail-in service in Puerto Rico

can be obtained during the warranty period by calling the Panasonic Sales Company telephone number listed in the

Servicenter Directory.

This warranty is extended only to the original purchaser. A purchase receipt or other proof of the date of the original

purchase is requires before warranty service is rendered.

This warranty only covers failures due to defects in materials and workmanship, which occur during normal use and

does not cover normal maintenance, including, but not limited to, video and audio head cleaning. The warranty does

not cover damage which occurs in shipment, or failures which are caused by products not supplied by the warrantor,

or failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration, modification,

faulty installation, set-up adjustments, improper antenna, inadequate signal pickup, maladjustment of consumer

controls, improper operation, power line surge, improper voltage supply, lightning damage, commercial use such as

hotel, office, restaurant, or other business or rental use of the product, or service by anyone other than a PASC

Factory Servicenter or a PASC authorized Servicenter, or damage that is attributable to acts of God.

LIMITS AND EXCLUSIONS

There are no express warranties except as listed above.

THE WARRANTOR SHALL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES

(INCLUDING, WITHOUT LIMITATION, DAMAGE TO RECORDING MEDIA) RESULTING FROM THE USE OF

THIS PRODUCTS, OR ARISING OUT OF ANY BREACH OF THE WARRANTY. ALL EXPRESS AND IMPLIED

WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR

PURPOSE, ARE LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.

Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitations

on how long an implied warranty lasts, so the above exclusions or limitations may not apply to you.

This warranty gives you specific legal rights and you may also have other rights, which vary, from state to

state. If a problem with this product develops during or after the warranty period, you may contact your

dealer or Servicenter. If the problem is not handled to your satisfaction, then write to the Consumer Affairs

Department at the Panasonic Consumer Electronics Company address above.

SERVICE CALLS WHICH DO NOT INVOLVE DEFECTIVE MATERIALS OR WORKMANSHIP

AS DETERMINED BY THE WARRANTOR, IN ITS SOLE DISCRETION, ARE NOT COVERED.

COSTS OF SUCH SERVICE CALLS ARE THE RESPONSIBILITY OF THE PURCHASER.

warvid 02/12/2001 53

Favor realice la conexion de antena o cable antes de conectar el cordon de AC a la

toma de pared.

Conectando el cordon de AC de la DECK en toma de pared iniciara automaticamente la busqueda

de canales y colocacion de tiempo.

Para Ant/Cable-DECK-TV

(_ Conecte Ant/Cable a la entrada de antena

de la DECK (DECK In)

(_) Conecte la salida de la DECK (DECK Out) a

la entrada de antena de la TV (TV In) con el

cable-accesorio RF incluido. VRF/URF

Para Sistema Digital de Satelite (DSS)/Convertidor de cable-DECK-TV

(_ Conecte la salida del convertidor de cable

a la "DECK In" con el RF cable accesorio

incluido.

(_ Conecte "DECK Out" a la "TV In" con el

cable-accesorio incluido.

bEntrada lIN) des_e

"re(

_ksor E_ECK IN FROM ANT deE_tuche"P__c°nvertid°r_et_

Entmda_R) desde

AR_A_LE

1Presione el boron DECK del control remoto

para dicha modalidad. Encienda la TV y

cambie a canal 3.

2Conecte cordon de AC de la DECK a la

toma de pared. La DECK se activara e

iniciara busqueda de canales y colocacion

de tiempo.

•Si la pantalla abajo no aparece cheque la

conexion DECK-TV y si la TV fue cambiada a

el canal 3,trate cambiando a el canal 4.

• Para cambios a e) canal de salida de la DECK

favor hacer referencia a"VCR's Output

Channel" (p, 19).

Selecciones se realizaron automaticamente

cuando la configuracion termino, esta

pantalla aparece.

9/29/2002DOM2:20PM

HORA VERAN I EGA : ACT

CANAL FIJADC' : CA 10

F_JACiON AUTOMAT_CA

COMPLETO

Si "Auto clock set is incomplete" aparece,

coloque manualmente el tiempo, vealo abajo.

_JAC_ON AtJTOMATICA

DEL RELOJ E$ INCOMPLETO

CON LA TECLA ACTION

FOR FAVOR FIJ_ EL RELOJ

Conectando cordon de AC a la toma de pared, I ,. o .= • _, • .•

__ _AUTOPROG RAMACION

j/_N PROCE8

|DEL RELOJ EN PROCES._

I/I \

{ CANC_LAR : STQP

Si usa convertidor de cable solo enciendala y

seleccione el canal PBS en su horatio de uso u

horario de zona. Si ufiliza receptor DSS este debe

estar apagado.

PRECAUCION

Si se sobre ajusta "NUT TYPE" el cable coaxial

RF podria daSar las terminales de conexion.

Ajusta ligeramente utiliza solo los dedos.

AI inicio, el idioma de

la pantalla estd fijado

a inglds.

Para cambiar el

idioma consulte la

pdgina 18.

Si la colocacion de tiempo fue incompleta.

1 Presione la tecla ACTION en el control remoto

para visualizar la pantalla del mend RELOJ.

2Presione • • para seleccionar el mes y SET

para ajustar. De la misma forma, seleccione y

ajuste la fecha, afio, hora y DST (Hora de

Verano). _

3Presione dos veces la tecla ACTION para

poner el RELOJ en marcha y salir.

1Inserte un cassette,

•La alimentaci6n del DECK se activa.

En la Pantalla de Visualizaci6n Multi

FunciSn se ilumina "VCR".

2 Presione PLAY para reproducir el cassette.

•Si el cassette no tiene lengeeta de

prevenci6n de grabaci6n (p&gina 6), se

inicia la reproducci6n autom&ticamente.

I Detalles especiales durante la grabacibn I

•Presione FF/SLOW+ o REW/SLOW- para

b_squeda de escenas hacia delante/hacia

atrAs. Presione PLAY para liberar. Luego de

que la b(_squeda se ha iniciado, cada vez

que presione FF/SLOW+ o REW/SLOW-

se cambia la velocidad como sigue:

[SLP] aprox. 21X*-_ aprox. 9X

[LP] aprox. 9X *-_ aprox. 7X

[SP] aprox. 7X *-_ aprox. 3X

Si la imogen se interrumpe con la velocidad de

21x, 9x o 7x, cambie la velocidad a 9x, 7x o 3x.

•Presione PAUSE/STILL para imagen Fija

(Congelada).

Presione PLAY para liberar.

•Presione PAUSE/STILL en el modo de

imagen fija para im&genes cuadro a cuadro.

Presione PLAY para liberar.

•Presione FF/SLOW+ o REW/SLOW- en el

modo de imagen fija para im_genes cuadro

a cuadro. Presione PLAY para liberar.

3Presione STOP para detener el cassette.

•Presione REW/SLOW- oFF/SLOW+ en el

modo de parada para rebobinado/avance

r_pido del cassette.

• Presione EJECT en el control remoto,

o STOP/EJECT en el DECK para expulsar

el cassette.

1 Presione PROG

para visualizar PROGRAM.

/ . T/

Orden para elegir

1) Para ajustar la FECHA de

grabacibn, presione AV

para seleccionar:

1-31 = una vez, o

DIARIO = a la misma hora

de lunes a viernes, o

SEMANA = a la misma

hora cada semana y

presione SET para ajustar.

Ejemplo _8-9 ........31-- 1-- 2...... 6_

Fecha de hoy -- 7 &/• Ordenparaelegir DIARIO

LSEMANAL ...... SEMANAL SEMANALJ

2) Para ajustar los items que quedan,

presione AV para seleccionar y presione

SET para ajustar los tiempos de INICIO/

PARADA, CANAL, o entrada de LiNEA (p_g.

35), y velocidad del cassette (SP, LP, SLP).

Presione PROG para finalizar PROGRAM.

3Presione AV

para seleccionar un n0mero

!! !!!i!! !!!;!! !! !! que no est& usando para

[ CA,CELAR:ADDJDLTingresar mas programas yiii,_ _ ii!_:G'" presione SET

para ajustar.

Luego repita el paso 2.

Presione nuevamente

PROG para salir.

1Inserte el cassette con leng_ieta de

proteccibn de grabacibn (pbg. 6).

2Presione OH A#V, olas teclas de ndmeros

para seleccionar el canal.

3Presione SPEED para seleccionar la

velocidad de grabaci6n (p&g.6)

• SP = Reproducci6n estandar,

• LP = Larga duraci6n,

• SLP = Superlarga duraci6n.

4 Presione REC para comenzar a grabar.

• Para eliminar escenas indeseadas, presione

PAUSE/STILL para pausar, y al presionar

nuevamente se reanuda la grabaci6n.

• No podra ver otro canal durante la

grabaci6n.

•Grabacibn de un toque (grabar en

marcha),

Presione REC repetidamente para ajustar la

hera de grabaci6n (30 min - 4 horas).

•La videograbadora termina la grabaci6n

auna hera programada.

5 Presione STOP para detener la grabaciSn. 55

o,- .•- ,. o ,- I_vA_]

Presione POWER en el control remoto o el aparato.

Presione DVD para seleccionar el modo DVD.

1) Presione OPEN/CLOSE.

2) Ponga un disco en la bandeja de disco.

•Sujete el disco sin tocar ninguna de sus superficies,

p6ngalo con el lado donde este impreso el tftulo

hacia arriba, alin6elo con las gu_as y p6ngalo en su

posici6n apropiada.

Disco de 3"(8 cm) Disco de 5" (12 cm)

Presione PLAY para iniciar la reproducci6n.

La bandeja del disco se cierra autom&ticamente.

•Si esta usando un DVD interactivo (Interactive DVD)

o un V(deo CD con contol de reproducci6n

(playback control) y aparece un men_ de tftulos

(TITLE MENU) en la pantalla, siga al paso 5.

Presione AV'_I lib o las teclas num_ricas para

seleccionar el articulo deseado.

Presione SET para la reproducciSn.

Si usa las teclas num_ricas, la reproduccibn

comienza autom_ticamente.

Presione STOP para parar la reproducciSn.

Presione OPEN/CLOSE para expulsar el disco.

_D_ r_ 0

REW/ __

SLOW-

NUMBER

keys_

•Para buscar una escena particular

Bdsqueda hacia adelante

Presione FF/SLOW+ en el modo de reproducci6n.

B_squeda hacia atr_s

Presione REW/SLOW- en el modo de reproducci6n.

(Para liberar, presione PLAY)

•Para saltar un capftulo o una pista

Salto hacia adelante

Presione SKIP _IH en el modo de reproducci6n.

Un capftulo (DVD) o una pista (Video CD/CD) se salta cada yes que se oprime la tecla.

Salto hacia atrzis

Presione I_'_ SKIP en el modo de reproducci6n.

• Para vet una imagen fija

Presione PAUSE/STILL durante la reproducci6n.

(Para liberar, presione PLAY)

• Para vet imdgenes cuadro a cuadro

(OVO/Video CD)

Presione PAUSE!STILL en el modo de imagen fija.

La imagen avanza un cuadro cada vez que presiona la tecla.

(Para volver a la reproducci6n normal, presione PLAY.)

•Para ver en cdmara lenta (DVD/Video CD)

Presione FF/SLOW+ oREW/SLOW- en el modo de imagen fija.

(Para liberar, presione PLAY)

OPEN/

--DVD

FF/

-SLOW+

PAUSE/

-STILL

Cuando se presiona DISPLAY, la visualizaci6n en pantalla

muestra la informaci6n del disco (fitulo /capitulo /nQmero de

lista, tiempo transcurrido de reproducci6n, audio /idioma del

subfitulo, y &ngulo) e informaci6n (repetir la reproducci6n,

modo reproducci6n, Karaoke vocal encendido /apagado, etc.).

1Presione DISPLAY en el modo reproducci6n o parada

para visualizar Visualizaciones en pantalla.

• Cada vez que se presione DISPLAY, la visualizaci6n

en pantalla cambia como se muestra a continuaci6n.

i Informaci6n seleccionada del disco

Informaci6n seleccionada de del DECK

Pantalla normal

Presione ALV (o • I_) para seleccionar el ftem deseado.

Presione SET para ajustar.

Presione AV para seleccionar el ajuste deseado.

Presione SET para ajustar.

Para volver ala pantalla normal,

Presione repetidamente CLEAR oDISPLAY.

FIJAR :SET SIGUtENTE DISPLAY

TITULO : 12 DVD]

0:_2:34

TBTULO : 12 DVD

0:12:34

ELEGIR:

FIJAR :

ELEGBR:A •

FIJAR :SET S_GUIENTE:DISpLAy

RE'_lJRN _ 61_p_ ,,_ SURROUND

_ _DISPLAY

(_) CD _CLEAR

SELECT

AV•P*

;ET

IL'I'J _ I II I P'J II I _uL

Presione DVD para seleccionar el mode DVD.

Presione ACTION en el modo de parada para

visualizar MENU.

Presione Ay para seteccionar el arffculo deseado.

Presione SET.

IDIOMAS DEL DISCO

Todos los idiomas ofrecidos en el disco pueden ser

ajustados, Si el idioma ajustado no es ofrecido en el

disco, se seleccionar& el idioma original del disco.

SALIDA DE AUDIO

Puede usted ajustar la salida audio procedente del

terminal de salida audio digital.

DETENER RASTREO

Para seleccionar "CAMPO" o "CUADRO fijo" para

prevenir inestabilidad o para permitir ver textos

pequehos o patrones finos claramente en el modo

de imagen fija.

PREFERENCIA

Para seleccionar si el material del video para

pantaIM ancha set& vuelto a reproducir en el estilo

Pan&Scan, en el estilo Letterbox oen el estilo 16 :

9 en la pantalla.

Presione AV para seleccionar el articulo deseado.

Presione SET.

Volver a visualizar el mend de DVD para

continuar el ajuste,

Presione ACTION ypase al paso 3 para ajustar

otro ajuste o, para salir, presione ACTION tres

veces.

Seleccione "AUDIO"

(Fijaci6n de f&brica :ingl6s)

IngMs /Espahol /Franc6s /Japonesa :

Originl :Se seleccionar& el idioma

original de cada disco.

OTRO **** :Se puede seleccionar el otto

idioma.

Seleccione "SUBTITULO"

(Fijaci6n de f_brica)

AUTO : Se seleccionar_ el mismo que fue

seleccionado en la preparaci6n

de "AUDIO".

•Si el idioma seleccionado en la

preparacibn de "AUDIO" se utiliza

durante la reproducci6n, los subtffulos

no aparecer_n.

•Si se utiliza otro idioma durante la

reproducci6n, los subtffulos aparecer&n

en el idioma seleccionado en la

preparaci6n de "AUDIO"

Inglds /Espadol /Franc_s /Japonesa :

OTRO **** : Se puede seleccionar el otto

idioma.

Seleccione "MENU"

(Fijaci6n de f&brica : ingles)

Inglds /Espa_ol /Franc_s /Japonesa :

OTRO **** : Se puede seleccionar el otto

idioma.

El idioma de los subtitulos seleccionado al hacer las

fijaciones iniciales se puede cambiar pot otto idioma

diferente, si este se encuentra disponible.

Presione SUBTITLE

durante la reproducci6n.

Cuando no haya

subtffulos grabados, "-"

se visualizara en lugar

de1 n6mero de idioma.

El idioma de la pista de sonido seleccionado al hacer

las fijaciones iniciales se puede cambiar por otro

idioma diferente, si este se encuentra disponible.

Presione AUDIO durante

la reproducci6n para

visualizar la pantalla

AUDIO.

2Presione AV para 2........

deseado.Selecci°narelidi°ma [__

Presione I_ (o _) para

ajustar.

Presione A_' para

seleccionar "ACTIVO" o

"INACTIVO."

Presione ,Ly para

seleccionar idioma.

Algunos discos DVD tienen escenas que han "1

sido filmadas simult&neamente desde un I

nQmero de &ngulos diferentes. Con estos

discos,'a mismaescena podraversedesde 2/

cada uno de estos _ngulos diferentes 8o,,oo:__G_

utilizando el botSn ANGLE.

Presione ANGLE

durante la

reproducciSn para EKe,,:,, _,_:s_

visualizar la

Presione AUDIO durante la reproducciSn

para visualizar la pantalla AUDIO.

Presione AV (o <1•)

para seleccionar el ajuste

deseado.

Presione •(o <) para

ajustar. (DVD solamente)

pantalla de Angulo.

Presione AV para

seleccionar el

Angulo deseado.

• DVDKaraoke (1 vocal) VOCAL ON--VOCAL OFF

• DVDKaraoke (2 vocals)VOCAL V1 + V2_VOCAL Vl _VOCAL V2_VOCAL OFF

t J

•Video CD LR _ L_ R

t J

Algunos discos con pelfculas, por ejemplo,

vienen con dos o m&s tffulos. Si el disco tiene

un ment_ de tffulos grabados, el botSn TITLE

podr& utilizarse para seleccionar el tffulo de la

pelfcula.

Presione TITLE durante la reproduccibn.

Ahora se visualiza una lista de los tffulos

del disco.

TITLE MENU 1

/11 !c st,e H

Dogs

of the world

Presione AV <• o

las teclas de

ndmeros para

seleccionar el tffulo

deseado.

Presione SET.

Algunos discos DVD tienen estructuras 6nicas de

ment_s Ilamadas men6s DVD. Por ejemplo, los DVDs

programados con un contenido complejo

proporcionan men6s gufa, y los grabados con varios

idiomas proporcionan ment_s para audio e idiomas de

subtffulos. Aunque los contenidos de los ment_s DVD

y la operaci6n cambian de disco a disco, a

continuaci6n se explica la operaci6n b&sica cuando

se utiliza esta caracterfstica.

Presione MENU durante la reproducci6n.

El ment_ de DVD introducido en el disco se

visualiza ahora.

2Presione AV <• o las

teclas de ndmeros

para seleccionar el ffem

deseado.

Presione SET.

Durante la reproducci6n de un DVD, puede ampliar partes especfficas de una imagen y seleccionar

la relaci6n de zoom usando el bot6n ZOOM.

Presione ZOOM repetidamente para cambiar el

tamafio de la imagen como se indica a continuaci6n:

• Use los botones A, V, • Y • para desplazar la posici6n hacia arriba, hacia abajo, hacia la

izquierda o hacia la derecha.

X 1.0 (ORIGINAL) X 1.5 (ZOOM 1) X 2.0 (ZOOM 2)

1era

3dapulsaci6nI59

A ACTION button .............................................. 8, 18

Accessories ......................................................... 4

ADD/DELETE button (Add or Delete a Channel). 8, 19

Audio Broadcast types (Stereo/SAP/Mono) .... 26

Audio Mode (Playback, Recording) ................. 27

Auto Operation Functions ............................... 31

Auto Shut-Off .................................................... 33

B Batteries .............................................................. 4

C Channel ("SET UP CHANNEL") ....................... 18

Channel Up/Down, Tracking/V-Lock Button ... 6, 8

Clock ("SET CLOCK") ....................................... 18

Commercial Skip ............................................... 31

Connections ............................................. 12 - 15

Copy Your Tapes (Dubbing) ............................ 35

COUNTER RESET button ............................ 8, 32

D DISPLAY button ........................................... 8, 11

DSS/CABLE mode button ........................... 8, 28

DST (Daylight Saving Time) ............................. 19

E EJECT button ............................................... 8, 20

ENTER button (For tuning TV Channel) ..... 8, 28

F FAST FORWARD/SEARCH button ............. 8, 20

H Head Cleaning .................................................... 6

I Index Search .................................................... 30

Indicator (Multi Function Display) .................... 11

Initial Setup (Ready to Play) ..................... 16, 17

INPUT button ................................................ 8, 35

L Limited Warranty .............................................. 53

Location of Controls (Remote, DECK) ..... 8 - 10

MMulti-Brand Control .................................... 28, 29

O On-Screen Displays (VCR) ................................ 11

One Touch Recording ...................................... 21

P PAUSE/STILL button (Still Picture) ............. 8, 20

PLAY button (Playback a Tape) ................. 8, 20

POWER button ................................................... 8

PROG button (PROGRAM) .......................... 8, 24

Program Clear, Review, Replace ..................... 25

Program End Search ........................................ 30

QQuality Picture ..................................................... 6

R REC button (Record on a Tape) ................. 8, 21

Record Tab ......................................................... 6

Remote Sensor ................................................... 9

Remote Warning ............................................... 34

Repeat Play ...................................................... 32

REWIND/SEARCH button ............................ 8, 20

S SAP/Hi-Fi ........................................................... 27

SEARCH (Index and Program End Search)... 30

Servicenter List ................................................. 52

SLOW+/SLOW- button (Slow Motion Picture) ..8, 20

Spanish Quick Use Guide ....................... 54 - 59

Specifications ...................................................... 7

SPEED button .............................................. 8, 21

Still (Freeze) Picture ......................................... 20

STOP button ................................................. 8, 20

T Tape Position, Tape Status ............................. 34

Timer Recording ............................................... 24

Trouble Shooting ....................................... 50, 51

TV mode button ............................................ 8, 28

V VCR Lock .......................................................... 33

VCR mode button ......................................... 8, 28

VCR/TV button ......................................... 8, 9, 21

VOLUME +/- button (TV Volume) ............... 8, 28

WWarning and Instruction Displays .................... 49

Weak Signal Display ......................................... 33

Z ZERO SEARCH button ................................ 8, 32

A ACTION button ............................................. 8, 45

ANGLE button (Multiple Angle Viewing) ..... 8, 37

AUDIO CONTROL button ............................ 8, 40

AUDIO button (Audio Soundtrack Language) ..8, 36

Audio Output (For Selecting Audio Output) ... 46

Auto Power Off Function .................................. 23

C CLEAR button ........................................ 8, 39, 44

Component Video Output ......................... 10, 13

D Disc Languages ................................................ 45

DISPLAY button ("On-Screen Display") ...... 8, 41

DVD Menu ......................................................... 38

DVD mode button ......................................... 8, 28

DVD Lock Ratings ............................................ 44

F Frame by Frame Picture ................................... 23

Forwards/Reverse Chapter/Track .................... 23

Forwards/Reverse Scene Search .................... 23

K Karaoke (Vocal Selection for Karaoke Discs).... 37

L Language Code List ........................................ 48

MMENU button (To display DVD Menu) ........ 8, 38

MP3 ................................................................... 43

Multiple Angle Viewing ..................................... 37

O OPEN/CLOSE button ................................... 8, 22

Optical Digital Audio Output ..................... 10, 15

P PLAY button (Play a Disc) ........................... 8, 22

Program Play (For Video CD/CD) ................... 39

PROGRESSIVE button ...................................... 9

Progressive Scan ............................................. 10

R Random Play (For Video CD/CD) ................... 40

Repeat Play ...................................................... 42

Resume Function ............................................. 23

RETURN button ............................................ 8, 22

S SEARCH button

(Forward/Reverse Scene Search) ............. 8, 23

SKIP I_1_1or I_ button

(Forward/Reverse Chapter/Track) ............. 8, 23

SLOW+/SLOW- button (Slow Motion Picture) .8, 23

Sound Output Level ......................................... 40

STILL button (Still Picture or Pause) .......... 8, 23

Still Mode (For selecting "FIELD" or "FRAME") ... 47

STOP button ................................................. 8, 22

SUBTITLE button

(For selecting Subtitle Language) ............. 8, 36

SURROUND button ...................................... 8, 23

S-Video Out ............................................... 10, 13

T TITLE button (Title Menu) ............................ 8, 38

TV Mode (For selecting the screen display style) .... 47

V Video CD ........................................................... 23

Z ZOOM button (Picture Zoom) ...................... 8, 37

Panasonic Consumer Electronics Company,

Division of Matsushita Electric Corporation of America

One Panasonic Way Secaucus, New Jersey 07094

Panasonic Sales Company ("PSC'),

Division of Matsushita Electric of Puerto Rico, Inc.

Ave. 65 de Infanteda. Km. 9.5 San Gabriel Industrial Park, Carolina,

Puerto Rico 00985

Printed in Indonesia

LSQT0580A

S0102-0

PANASONIC DVD/VCR Combo Manual L0208212

Navigation menu

Versions of this User Manual:

Views

Navigation