PARROT CK5050 Radio Bluetooth Modular User Manual CK5050 Datasheet 1 95

PARROT Radio Bluetooth Modular CK5050 Datasheet 1 95

users manual

Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  1          Hands Free Car Kit Module CK5050    Datasheet       Product Scope  Parrot has identified a demand for the integration of the telephony into a host product like car radio or navigation system. The answer to this demand is CK5050.  The CK5050 is a feature-rich Bluetooth Hands Free Car Kit solution dedicated for the integration of Handsfree Bluetooth applications in car radios and car telematics systems.
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  2   1 PRODUCT OVERVIEW 3 1.1 CK5050 Features  3 2 ELECTRICAL ARCHITECTURE 4 2.1 CK5050 internal Block Diagram 4 2.2 Electrical Interfaces Characteristics 5 2.3 Main Connector Pinout 7 2.4 Application reference design (Analog interface) 8 2.5 Power consumption 9 2.6 Bluetooth Radio Link 9 3 HARDWARE LAYOUT 11 3.1 Components placement with internal antenna / Part Number PI040058/PI040059 11 3.2 Components placement with internal antenna / Part Number PI040064 13 4 SOFTWARE SPECIFICATIONS 15 4.1 Bluetooth Stack 15 4.2 Bluetooth Profiles Supported 15 4.3 Software Architecture 15 4.4 Software Interface 16 5 MECHANICAL DESIGN 17 6 DEVELOPMENT TOOLS 19 7 FCC REQUIREMENTS FOR MODULE APPLICATION 21
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  31 Product Overview  This document is the Datasheet of the Parrot CK5050 Bluetooth Module. The CK5050 is a feature-rich Bluetooth platform dedicated for the integration of Bluetooth applications in car audios, car telematic systems or any systems requiring a complete embedded Bluetooth solution.  1.1 CK5050 Features  Bluetooth connectivity • Bluetooth Power Class 2 Radio • Embedded Bluetooth v1.1 & v1.2 compliant • Embedded profiles • Compatible with all Bluetooth phones • Pairing and connection with all Bluetooth Devices: Phones, Smartphones, PDA … • Multiple user support: Up to 5 paired phones • Multiple connection (up to 3 device connected at the same time) • Multiple profile (for example A2DP and HFP at the same time with same or different devices)   Phone • Pick-up, Hang-up, Redial • Automatic answer (from host via dial command) • Send DTMF during calls • Private Mode   Phone Book • Automatic Phone book synchronization over Bluetooth (up to 1000 names) • Call history (dialed number, received calls, missed calls) • All Synchronization Methods • Full Unicode for compatibility with numerous characters sets (European, Russian, Chinese, Japanese…)   Digital Signal Processing and Acoustics • Acoustic Echo cancellation for Full Duplex operation •  Noise reduction • Beam forming with 2 microphones inputs • Volume control • Speaker dependant voice recognition (trained names and keyword)   Audio Streaming • Embedded SBC decoder • Embedded MP3 decoder from Thomson Licensing (optional) • Stereo audio output   Miscellaneous • Provide Phone Battery Level and Network Level, Carrier Name (depends on phones) • Embedded test pattern   Software Update • Full standard Software available (free upgrade from Parrot homepage) • Software update available through Bluetooth or UART • Very large compatibility with Phones, Smartphones, PDAs, Music players
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  42 Electrical Architecture  2.1 CK5050 internal Block Diagram    CK5050 Simplified Block Diagram     The main electrical interfaces provided by the CK5050 are: • Audio •  Analog interface : 2 audio inputs + 1 stereo output •  Digital I2S interface : 1 stereo input + output • Serial Link : UART for the software interface through AT commands    (see “Host Software Interface specification”) • 3.3 V Power Supply • Optional 1.2V Power Supply            POWER SUPPLY  3.3 Volts (Extern) 1.2 Volts (Intern or Extern) 2.7 Volts (Intern) Amplis FLASH 32Mb SDRAM 64Mb UART Interface Parrot CK5050 UART 0 UART 1MIC 1 MIC 2 SPK 1 SPK 2  Radio BT 1.2
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  52.2 Electrical Interfaces Characteristics  Absolute Maximum Rating  Min   Max  Unit Supply Voltage 3,2   3.6 V Ambiant Temperature -40   +85 °C Storage Temperature -40   +125 °C  The P5 Asics core can operate at 208 MHz.   SERIAL LINK • UART: 16C550 Compatible Type. • 1 start bit, 1 stop bit, no parity • The Least Significant Bit (LSB) is sent first.    RESET • Used to reset the Parrot Daughter Board, Active low.  (maxVIL= 0.2V & minVIH= 2.5V). • Switching ON/OFF procedures :  Switching on: - The signal “NRESET” on the host interface is forced to a logical zero value by host until the supply voltage reached its nominal value. During this phase no component on the module is supplied. - The host switch its signal “NRESET” to a logical one value allowing the module to turn on its supply. - After 280ms, the supply gets stabilized and then triggers the start of the ASIC - 100ms is necessary for the ASIC to start and give execution to the embedded software that will turn the module into a permanent “active mode”  Switch off through software: - The host sends the "sleep” AT command - The ASIC disconnects any BT link - The ASIC sends the "sleep acknowledge" AT command allowing the host to switch the reset to a zero logical value. - If the host activate the “NRESET” to zero for at least 5 us but no more than 4ms the module will be reset.   POWER  • VCC:  Supply voltage 3.3V(-0.1V/+0.3V) including tolerances, thermal changes, noise over/under shoot due to load change and/or car battery voltage change, load dump.  Peak current: 400 mA during switch on (2 ms). • 1.2V OPTIONAL POWER SUPPLY: This optional allows lower electrical power consumption of CK5050.  Operating Conditions: Supply Voltage for Logic Core: 1.2V (-0.04V/+0.12V)
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  6    AUDIO OUTPUT (1) :  • SPK1: Output - left channel and SPK2: Output - right channel SPK1P (OUTL) and SPK2P (OUTR): The stereo channel would require two posts filtering of analog output.  Outputs capable of driving a 10kOhms (min) load to 900 mV RMS.  SPK1N and SPK2N: Middle reference Voltage (2V typ) See chapter 2.4: Application reference design for better result.  • Stereo I2S audio output channels    AUDIO INPUT :  • MIC1N and MIC1P are differential input.  • Connect to electret condenser microphone                Electrical characteristics of microphone:                                   Impedance less than 2.2kOhms                                  Operating voltage: 1.5V-3.6V DC                                   Current consumption: 500μA max.                No need to put bias circuit. • Stereo I2S audio input channels    BLUETOOTH RADIO LINK  • Internal Bluetooth antenna   (1) Please note that MUTE function for car sound system is realized by software AT command
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  72.3 Main Connector Pinout The following pinout allows an interface to the CK5050 according to market standards: MIC1N SPK2P/I2S_SYNCSPK2N/I2S_OUTSPK1N/I2S_INU0_OUTU1_OUTU0_INMIC1P MIC2PU1_INVSSSPK1P/I2S_CLK MIC2NJ1Header_8+8113355779911 1113 1315 152244668810101212141416161V2_EXTVCC NRESET                U1_OUTU0_INMIC1PMIC1NSPK2P/I2S_SYNCSPK2N/I2S_OUT SPK1P/I2S_CLKMIC2PMIC2NSPK1N/I2S_INU0_OUTU1_INVSSJ1Header_8+811335577991111131315152244668810 1012 1214 1416 16NRESET1V2_EXTVCC            With Right angle Connector                    With vertical Connector                  PI040058/PI040064                   PI040059/PI040065   TB1Header 212  PIN   FUNCTION  INPUT / OUTPUT  COMMENT 1  UART1_OUT O 2  UART1_IN I 16C550 Compatible type (for Debug interface) 3  NRESET  I  RESET trigger Input 4   VCC  I POWER 3.3V 5  SPK2N/I2S_OUT   O 6  SPK1N /I2S_IN  O/I 7  SPK2P/I2S_SYNC O 8  SPK1P/I2S_CLK   O Analogical & Digital audio output Digital audio input  9  MIC2N I 10  MIC1N I 11  MIC2P   I 12  MIC1P   I Analogical audio input  13  Vss   I  Vss (GROUND) 14  1V2_EXT I  Option: 1V2 Extern 15  UART0_OUT O 16  UART0_IN I 16C550 Compatible type (for Host AT commands and Flash Update interface)  PIN   FUNCTION  INPUT / OUTPUT  COMMENT 1  TB1   I 2  TB1   I -  Hole 1   I -  Hole 2  I Connect to Vss ( Ground of CK5050 module) if necessary -  Hole 3  -  Mechanical only if necessary
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  82.4 Application reference design (Analog interface)  NRESETRF 0RC2 10p_50V_COGC2 10p_50V_COGSPK2PSPK2NU0_INMIC1PMIC1NU0_OUTU1_OUTMIC2PMIC2NSPK1NU1_INSPK1PJ1Parrot CK5050113355779911 1113 1315 152244668810101212141416161V2_EXTVCC NRESETTB1Header 212GROUNDRF 0RRF 0RC11u_16V_X5RGNDMIC1N MIC2PMIC2NMIC1PR110KGNDR110K9 VSPK1SPK29 V+C100u_6V3_ALU.GND+C 100u_6V3_ALU.R22KC1 1u_16V_X5RC1 1u_16V_X5RC1 1u_16V_X5RC1 1u_16V_X5RSPK2PGNDSPK2NU0_OUTVCCR22KR22KR22KRF 0RSPK1PRF 0RSPK1NRF 0RCK5050  +Resistors +Amplifiers-+1234 8-+TL072;: Low Noise J-FET DUAL OPERATIONAL AMPLIFIERS7654 8GNDR247KU1_In U1_OUTR247KRF 0RR247KR247K GNDGNDVSS RF 0RRF 0RRF 0RRF 0RHole1Hole1Hole2U0_In   Audio Pins SPK1P, SPK1N, SPK2P, SPK2N, MIC1P, MIC1N, MIC2P and MIC2N must be protect against noise by ground.  U0_In, U0_Out, U1_In and U1_Out are noisy signal.  Isolate U0_In, U0_Out, U1_In, U1_Out, MIC1P, MIC1N, MIC2P, MIC2N, VCC, NRESET and VSS by 0R resistors (RF: 0603) and use ferrites in case of ECM disturbances.
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  92.5 Power consumption The CK5050 features one optional 1.2V power supply on an additional pin This optional allows lower electrical power consumption.  FUNCTIONING MODES WITHOUT 1.2V PIN CURRENT ON 3.3V WITH 1.2V PIN CURRENT ON PINS 3.3V  1.2V  REMARKS STOP MODE <50 µA  -  BT radio and Parrot5 ASIC stopped, Internal voltage regulator switched off.(Power off or Reset active) STANDBY MODE <130 mA  < 120 mA  < 10 mA  BT module in sniff mode, Parrot ASIC in idle HANDSFREE MODE <250 mA  < 150 mA  < 100 mA  Handsfree communication with a Bluetooth enabled phone AUDIO STREAMING <280 mA  < 160 mA  < 120 mA  Reception of an encoded stream, decoding, playing of the audio 2.6 Bluetooth Radio Link 2 different configurations available:  CONFIG 1 / PART NUMBER PI040058/ PI040059 Embedded BT Antenna on PCB Module The most efficient & cost effective  integration
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  10   CONFIG 1 / PI040064 Embedded BT Antenna on PCB Module The most efficient & cost effective  integration
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  113 Hardware layout 3.1 Components placement with internal antenna / Part Number PI040058/PI040059 Details:  U1: Parrot5 ASIC (BGA) + U2/U3: SDRam/Flash (BGA) + U100: BT radio transceiver (QFN) + U200: 2V7 Voltage regulator (Sot23) + U201: 1V2 Voltage regulator (DFN8) + U202: Voltage supervisor (Sot23) +U300: Operational Amplifiers (TSSOP) +X100: Precision crystal oscillator + J1: Main connector + TB1: 2 pin connector.   COMPONENTS SIDE (TOP)
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  12      BOTTOM SIDE (135 Tests Points)    PCB size: 34mm x 46.55mm Tolerances +/- 0.1 mm
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  13 3.2 Components placement with internal antenna / Part Number PI040064  Details:  U1: Parrot5 ASIC (BGA) + U2/U3: SDRam/Flash (BGA) + U100: BT radio transceiver (QFN) + U200: 2V7 Voltage regulator (Sot23) + U201: 1V2 Voltage regulator (DFN8) + U202: Voltage supervisor (Sot23) +U300: Operational Amplifiers (TSSOP) +X100: Precision crystal oscillator + J1: Main connector + TB1: 2 pin connector.    COMPONENTS SIDE (TOP)
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  14        BOTTOM SIDE (135 Tests Points)    PCB size: 34mm x 42.6mm Tolerances +/- 0.1 mm
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  154 Software Specifications  4.1 Bluetooth Stack  HCI (Host Controller interface),   L2CAP (Logical Link Control and Adaptation Protocol),   RFCOMM (TS011...),   SDP (Service Discovery Protocol),   OBEX (IrDA Object Exchange).  4.2 Bluetooth Profiles Supported  Generic Access Profile   GAP   Phone Management • HFP 0.96 - 1.0 - 1.5  • HSP 1.0   Message Management • MAP 1.0   Phone Book • PBAP 1.0 • SYNC 1.1 (IrMC SYNC over BT)  • OPP 1.0 Server/Client (Vcard 2.1) • GSM 07.07 AT Commands • Nokia synchronization protocol   Multimedia • A2DP (Audio) • SBC decoding  • (optional MP3 decoding) • AVRCP   Others • SPP 1.1 • Image transfer over OPP • DUNP 1.1 • Software update over SPP • Remote configuration 4.3 Software Architecture See Bluetooth Stack Software Specification (Confidential).
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  164.4 Software Interface  The main target of the software interface is to provide a high level command set, hiding the internal complexity of the Bluetooth function and the variability of its standard across different devices.  This software interface is based on well-known AT commands. Some of these commands are directly derived from the GSM 07.07 recommendation and from the appropriate Bluetooth profiles.  Some supplementary commands are used to manage Bluetooth related functions like device pairing and connection management as well as the acoustic and speech recognition functions.  AT Command List and Bluetooth AT Command Software Specification is available.  BLUES supports Unicode, which allows the management of accents and phonebook in any language.  BLUES is also very friendly with a flexible MMI. One can use BLUES with a simple single or double key interface as well as a diversity of graphic displays.
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  175 Mechanical Design  The CK5050 features a male connector allowing a connection to the motherboard through a female connector or by through hole soldering (CK5050 soldered vertically - wave soldering is possible).  Board to Board Main Connector   16 PIN connector + 2 x 2 Pin connector  2mm pitch double row (2x8 and 2x1)  Right Angle (MOLEX 87760-1618) /Upright connector (MOLEX 87758-1618 CKTS, 87758-1618(specific) and 87758-0218 (specific))      Mechanical dimensions (Tolerances -0.1/0.1 mm) with internal BT antenna and Right angle connector   Part Number PI040058
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  18  Mechanical dimensions (Tolerances -0.1/0.1 mm) with internal BT antenna and Vertical Connector  Part Number PI040059  Mechanical dimensions (Tolerances -0.1/0.1 mm) with internal BT antenna and Right angle connector  Part Number PI040064
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  196 Development Tools  Demo board available  Host Software Interface specification  Host software example with C++ source code.   CK5050 WORKBENCH/TOP SIDE VIEW
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  20      CK5050 WORKBENCH/BOTTOM SIDE VIEW
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  217 FCC Requirements for module application •  The applicant of the final device into which the module CK5050 is installed is not required to obtain a new authorization for this. Moreover, module CK5050 is also submitted to CE mark, Bluetooth certification, and is considered is an automotive product. This product respects FCC part 15 C requirements for a Bluetooth application.  •  Module CK5050 is labelled with its own FCC number on its shielding, and, if the FCC ID is not visible when the module is installed inside final device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: RKXCK5050” or “Contains FCC ID: RKXCK5050.” Any similar wording that expresses the same meaning may be used.  •  Module CK5050 can not be integrated in a final device which is connected to the AC power lines. It is necessary that final device must be supplied by a battery.  •  FCC RF exposure requirements:  This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter.  • THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:   (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND  (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.   NOTE:   THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Prepared Hocine BELKHOUDJA Title CK5050 Datasheet Approved  Date 26/01/07 Revision 1.95  File CK5050_Datasheet_1.95     PROPRIETARY AND CONFIDENTIAL The information contained in this document is the sole property of Parrot. Any reproduction in part or as a whole without the written permission of Parrot is prohibited. Project CK5050 Part Numbers PI040058/PI040059/PI040064  22

Navigation menu