User Manual
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 2834681 |
| Application ID | n1o8uwzqcvwCw7RjYeebbQ== |
| Document Description | User Manual |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 225.46kB (2818271 bits) |
| Date Submitted | 2015-12-08 00:00:00 |
| Date Available | 2015-12-08 00:00:00 |
| Creation Date | 2015-12-07 12:08:32 |
| Producing Software | Adobe PDF library 11.00 |
| Document Lastmod | 2015-12-07 12:08:32 |
| Document Title | PBH-200_사용설명서_ì˜ë¬¸_20151207 |
| Document Creator | Adobe Illustrator CC 2014 (Windows) |
PBH-200 User Manual * Please refer to the manual at www.croise.co.kr for more information CE Compliance Information Croise.R, hereby declares that this PBH-200 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. FCC Compliance Information FCC ID : 2AD5K-PBH200 This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Information to the user : NOTE : This equipment has been tested and found to comply with limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro°vide reasonable protection against harmful interference in a residential installation. This equipment generates, use and can radiate radio frequency energy and, if not in°stalled and used in accordance with the instructions, may cause harmful interference to radio communications. However there is no guarantee that interference will not occur in a particular installation, If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. the user is encouraged to try the correct interference by one or more of the following measures : - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. CAUTION TO USER : Changes or modifications not expressly approved by the party reasonable for compliance could void the user’s authority to operate the equipment. Package Contents Package Contents PBH-200 User Manual Description of Parts Installation of Cable Clip Product Specifications and Features How to use Power on/off Battery Charging Pairing Calling Transferring a Call Volume Control Music Play Language Set-up Change Multi-Connection Using Application Button Functions & Status Information Precautions Product Warranty and Service Limited Warranty Product Warranty Certificate 14 15 16 17 / Package Contents / Cable Clip Earbud Covers (Large / Small) User Manual PBH-200 ※ The components of above package are subject to change without notice to improve the product performance or quality. / Description of Parts / Micro USB Volume Up Mic 2 Volume Down Play / Pause Call Mic 1 LED / Installation of Cable Clip / Please hang the clip on the headset band by stretching it little bit. Place it at the suit position and fix the earphone cable properly. ※ The length of cable from the headset body to a user's ear can be easily adjusted through using the clip. / Product Specifications and features / Standby Time 500 hours Operating Time (Music) 12 hours Operating Time(Talk) 14 hours Charging Time 2 hours Battery Lithium Polymer Battery 3.7V (195mAh) Working Distance 10m Supported profiles HFP / HSP / A2DP / AVRCP Decoder SBC, APT-X Bluetooth Version Version 4.1 Power Consumption 0.5W ※ Above operating time subject to change based upon connected devices or the surrounding environment. / How to use / 1. Power On / Off Power On - Press the button for 1 second - The red + blue LED light flashes for 0.5 second and Power is turned on with voice guide. Power Off - Press the button for 3 seconds - The red + blue LED light flashes for 0.5 second and Power is turned off with voice guide. 2. Battery Charging LED indicator - When the charger is connected, the Red LED is on. - When charging is completed, the Blue LED is on. ※ When the charger is connected, the headset will be disconnected from the device. ※ The power turns off when USB charger is disconnected. Recommendations - Using USB Hub may take extra charging time due to the low current. For Fast charging, please use the 5V 500mA ~ 5V 1A rated charger. ※ It takes approximately 2 hours to have it fully charged when battery exhausted 3. Battery Status Alarm & Alert - Press Call and Volume + button at the same time for a second for audio guidance for the current battery level. “Battery Full” / “Battery Half” / “Battery not enough” 4. Low Battery Alarm & Alert - The red LED light flashes 3 times with voice guidance “Battery not enough” if the battery is less than 1 hour use. 5. Critical Battery - The notice continues every 2 minutes if the battery is less than 10 minutes use and power is turned off with voice guidance “Battery Empty” at the critical battery. 6. Pairing Before using the headset for the first time, you must pair it with a Bluetooth-enabled Device. * Pairing : Connect between Bluetooth-enabled Device and Headset. - Press the call button for 1 second to turn on the device - After power on, the headset will automatically enter to pairing mode. (The red/blue LED light flashes) - The headset will automatically enter to waiting mode if it is not connected for 3 minutes. (The power is automatically after 50 minutes with waiting mode) - On the device you want to have paired, find the Bluetooth menu and search & select “PBH-200” from the list of devices. - If connected without any problem, the headset will be paired with audio guide “Connected” - Once pairing is complete, it will be paired automatically afterwards. ※ Manual Pairing - Hold Call button for 2 second while placing power slide switch to ON then it will enter to Pairing mode with voice guide “Start pairing”. And Register the PBH-200 in above same way. - If PIN code is required, please input “0000”. Clearing Paired Device - Hold call button for 1 second and Volume button while placing power slide switch to ON then paired device will be cleared with voice guide “ Clear Paired List” and enter to Pairing Mode. 7. Calling Voice Dial - Briefly press Call button to activate Voice Dial. ※ To use Voice Dialing, your mobile phone must support Voice Dialing. 8. Call Answer / Call End / Call Reject Call Answer / Call End - Briefly press Call button to answer the incoming call. - Briefly press Call button to end the call. Call Reject - Briefly press Call button to reject the incoming call. 9. Call Transfer - During the call, press Call button for 1 second, audio will be transferred from headset to mobile phone. - And press Call button for 1 second again, audio will be transferred from mobile phone to headset. 10. Setting Waiting Mode while Calling Setting Waiting mode - During the call, briefly press Call button twice and enter to call waiting mode. Pressing Call button twice again back to the call mode. ※ To use Call waiting mode, the mobile phone must support ‘Call waiting’ service. Incoming second call while calling - Briefly press Call button to end the original call and answer the second call. - Briefly press Call button twice to answer the second call without hanging up the original call (Original call will be call waiting mode) Ending a Call - Briefly press Call button. 11. Volume Control ※ User can hear the long beep at maximum and minimum volume. Volume Up - While calling or listening the music, briefly press Volume + button. Volume Down - While calling or listening the music, briefly press Volume - button. Mute - During the call, press Volume +, - button at the same time for mute. - Press Volume +, - button at the same time again to cancel the mute. 12. Music Music Play / Music Pause - To play a song or pause playback, press Play/Pause button. Music Stop - Press Play / Pause button for 1second. Skip Backward - It goes back to previous music if press the Volume - button for 1 second during play Skip Forward - It goes to the next music if press the Volume + button for 1 second during play Rewind - It rewinds if press the Volume - button for 3 second during play Fast Forward - It forwards if press the Volume + button for 3 second during play 13. Language set-up change Language set-up will be changed if press the Volume + & Volume – together for 3 seconds. Sequence : Korean → English → Chinese 14. Advanced Multi-Connection Multi-connection is useful to link more than a mobile device. Pairing - Proceed pairing of the first device manually. - Power off the headset upon registration of the first device is completed. - Power on holding the call button for pairing mode. - Pairing 2nd device for registration. - Connecting 1st device to the headset. Calling - Ring tone sounds when the second device has incoming call while you are talking through first device. - You can operate the same as "Setting Waiting Mode while Calling". Listening Music - In multi-pairing mode, key control is available for the first played device. - Press Play/Pause button briefly to stop playback from the first device. Then key control is available for 2nd Device. 15. Auto Reconnect Automatic connection when headset is turned on - If it kept the information of previously paired device, it will be automatically connected when headset is turned on. ※ If it failed automatic connection, briefly press Call button once to connect. Out Of Range - If a connected device is more than 10m away from the device, voice guides "Disconnected" with the vibration. - The notice continues every 30 seconds for three minutes and it automatically connects if the device is placed in a connection range. 16. Usage of Croise.R Reader application Additional function is available such as change of headset manner mode, Volume set-up, Message read set-up, Remote shoots, etc after set-up the Croise.R Reader app. Please download app. in google play store by typing croise or partron. * It is available only for the android (Device of higher than 4.3 version is available) 17. Button function and status information Function Action Power ON Press the call button for 1 second Power OFF Press the call button for 3 seconds Volume Up Briefly press the volume + button Volume Down Briefly press the volume - button Status Voice : Turn on LED : Red and Blue LED blink at the same time for 0.5 second and then off. ※ 12 level of Volume Answer Call Briefly press the call button Reject Call Press the call button for 1 second and take off Call Cancel Briefly press the call button during the call Mute Press the volume +, volume – shortly at the same time Transferring a call Press the call button for 1 second Call Waiting Press the call button quickly twice during the call Voice Dial Press the button for 1 second and take off LED Information Receiving a call Dialing a call Blue LED lights flashes slowly During the call Blue LED light flashes twice in every 5 sec Standby Red LED light flashes once in every 3 sec Disconnection Blue LED light flashes Function Connection to Mobile Phone Action Status Briefly press the call button on connection standby status Red, Blue LED lights flash in turn Pairing related voice information : Pairing Mode Press the call button for 3 seconds in off mode Connected Connected Disconnected Disconnected Link Loss Out of Range Pairing Start paring Connection information delete Battery Status check Music Play / Pause Music Stop Press the call button & volume button at the same time for 1 second. Briefly Press Play/Pause button Press Play/Pause button for 1 second during the play Battery Status Notice Clear Paired List Danger Red, Blue LED flash "Battery Empty." Insufficient Red LED flickers 3 times quickly "Battery not enough" Normal “Batter Half” Sufficient “Battery Full” Function Action Skip Backward Press the volume – button for 1 second and take off during playing the music Skip Forward Press the volume + button for 1 second and take off during playing the music Fast Forward Press the volume + button for 3 seconds and take off during playing the music Rewind Press the volume - button for 3 seconds and take off during playing the music Language set-up change Press the volume + and volume – at the same time for 3 seconds. Sequence : Korean → English → Chinese Voice : Korean → English → Chinese Delete connection information Press the call button, volume –button for 1 second at the same time in power off mode or standby Enter pairing mode after deleting connection information. Start Charging Connect the cable for the recharge Charging Complete Status Red LED is on Blue LED is on LED flashes when cable is removed (Power off) / Precautions / • Do not disassemble or modify. It may cause fire and disorder. • Do not use or place the product at high or low temperature. • Do not place the product near the high humidity, volatile, or flammables. • Please be cautious not to shock on the product. • It might give negative effect on the ear hearing if used for a long time in high volume. • This bluetooth device might be damaged if either over 1A/1000mA of charger or the defective charger is used. • In the case using car charger, the high output from truck may affect to the device. Also please have the device disconnected from the cigar jack charger which may affect to the device when starting the car engine. / Product Warranty and Service / • This device passed strict quality management and inspection process. • Warranty period is 1 year. • Even in the warranty period, you can be charged for the paid service if needed. • Product dimension and outer appearance might be changed for the quality improvement without advance notice. • This device cannot be used for the human rescue related service as it have the interference. / Guide for the Paid Service / • After Product Warranty Period (1 year/6 months for the battery) • User's negligence or any failure from improper disassemble, repair and modification. • Failure caused by acts of God such as fire and flood. • Failure using other options which is not provided from Partron. • This Warranty does not cover product failures due to improper repair installations, modifications or service performed by a non-authorized person. • Any Consumable parts. / Product Warranty / •The warranty is valid only if the original receipt issued to the original purchaser by the dealer. •If the product label is removed, physical change of the product or unapproved repair by the 3rd person, will invalidate of the warranty. •The consumables, such as ear cap, battery and other accessories, which have limited life, will be excluded from the product warranty. •This Warranty do not cover for the damage and accident by the misuse. •This Warranty do not cover the lost and damage of the product on either transportation or delivery. / Product Warranty Card / Product Name Purchased Date Month Day Year Purchased Place Model No. Warranty Period Within 1 year from the purchased date (Battery Warranty period is 6 months) 1. Model Name : Neck Band Bluetooth Headset 2. Part Number : PBH-200 3. Manufacturer : PARTRON Co., Ltd. 4. Country of Origin : Republic of Korea 5. Address : 22, Samsung 1-ro 2-gil, Hwaseong, Gyeonggi 445-170, Korea - Please take the time to follow the instructions in this owner’s guide carefully. - Appearance and specifications of this product are subject to change without prior notice for product improvement. * This device cannot be used for the human rescue related service because of the possibility of being interfered.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.5 Linearized : No XMP Toolkit : Adobe XMP Core 5.6-c014 79.156821, 2014/08/29-03:07:50 Format : application/pdf Title : PBH-200_사용설명서_영문_20151207 Metadata Date : 2015:12:07 12:08:32+09:00 Modify Date : 2015:12:07 12:08:32+09:00 Create Date : 2015:12:07 12:08:32+10:00 Creator Tool : Adobe Illustrator CC 2014 (Windows) Thumbnail Width : 148 Thumbnail Height : 256 Thumbnail Format : JPEG Thumbnail Image : (Binary data 13133 bytes, use -b option to extract) Instance ID : uuid:5a5dbbea-22c9-4121-a43b-fe610b40e794 Document ID : xmp.did:3bb465b6-ce87-0541-828a-58baae0267eb Original Document ID : uuid:5D20892493BFDB11914A8590D31508C8 Rendition Class : proof:pdf Derived From Instance ID : uuid:8daa8bbd-f502-4e1a-99b5-e0639b8974de Derived From Document ID : xmp.did:ca34eecf-24b9-0244-84ef-8f65ef0daec2 Derived From Original Document ID: uuid:5D20892493BFDB11914A8590D31508C8 Derived From Rendition Class : proof:pdf History Action : saved, saved History Instance ID : xmp.iid:5156de1b-8d4c-1245-a43b-7bf133f589e1, xmp.iid:3bb465b6-ce87-0541-828a-58baae0267eb History When : 2015:11:26 10:11:42+09:00, 2015:12:07 12:08:30+09:00 History Software Agent : Adobe Illustrator CC 2014 (Windows), Adobe Illustrator CC 2014 (Windows) History Changed : /, / Manifest Link Form : EmbedByReference, EmbedByReference, EmbedByReference, EmbedByReference Manifest Reference File Path : D:\Accessary_Business_2014\PSB-100\이어폰O-render\black\우측면-1_ 추가.jpg, C:\Users\RYUMISUN\Desktop\11\manual.png, C:\Users\user\Desktop\제목 없음-1.png, C:\Users\RYUMISUN\Desktop\11\manual.png Ingredients File Path : D:\Accessary_Business_2014\PSB-100\이어폰O-render\black\우측면-1_ 추가.jpg, C:\Users\RYUMISUN\Desktop\11\manual.png, C:\Users\user\Desktop\제목 없음-1.png, C:\Users\RYUMISUN\Desktop\11\manual.png Startup Profile : Print Has Visible Overprint : False Has Visible Transparency : True N Pages : 1 Max Page Size W : 83.999917 Max Page Size H : 66.001194 Max Page Size Unit : Millimeters Font Name : NanumGothic, NanumGothicBold, AdobeMyungjoStd-Medium Font Family : 나눔고딕, 나눔고딕, Adobe 명조 Std Font Face : Regular, Bold, M Font Type : TrueType, TrueType, Open Type Font Version : Version 2.000;PS 1;hotconv 1.0.56;makeotf.lib2.0.21325, Version 2.000;PS 1;hotconv 1.0.56;makeotf.lib2.0.21325, Version 1.001;PS 1;Core 1.0.38;makeotf.lib1.7.12746 Font Composite : False, False, False Font File Name : 나눔고딕.ttf, 나눔고딕Bold.ttf, adobemyungjostd-medium.otf Plate Names : Cyan, Magenta, Yellow, Black Swatch Groups Group Name : 밝기 Swatch Groups Group Type : 1 Swatch Groups Colorants Swatch Name: C=60 M=90 Y=0 K=0 Swatch Groups Colorants Mode : RGB Swatch Groups Colorants Type : PROCESS Swatch Groups Colorants Red : 126 Swatch Groups Colorants Green : 49 Swatch Groups Colorants Blue : 142 Producer : Adobe PDF library 11.00 Page Count : 24 Creator : Adobe Illustrator CC 2014 (Windows)EXIF Metadata provided by EXIF.tools