PAX Technology A920 Wireless POS Terminal User Manual
PAX Technology Limited Wireless POS Terminal Users Manual
15_A920 UserMan,r2
| Download: |  |
| Mirror Download [FCC.gov] | |
| Document ID | 3267665 |
| Application ID | 0VxOxtDK31YDnUHGPH3o1g== |
| Document Description | 15_A920 UserMan,r2 |
| Short Term Confidential | No |
| Permanent Confidential | No |
| Supercede | No |
| Document Type | User Manual |
| Display Format | Adobe Acrobat PDF - pdf |
| Filesize | 37.65kB (470667 bits) |
| Date Submitted | 2017-01-23 00:00:00 |
| Date Available | 2017-01-23 00:00:00 |
| Creation Date | 2016-10-26 03:03:43 |
| Producing Software | Corel PDF Engine Version 14.0.0.653 |
| Document Lastmod | 0000-00-00 00:00:00 |
| Document Title | Users Manual |
| Document Creator | CorelDRAW |
| Document Author: | wangd(王丹/深圳） |
Warning: This device complies with Part 15 of the FCC rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or change to this equipment. Such modifications or change could void the user’s authority to operate the equipment. This radio transmitter (identify the device by certification number or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. -- Increase the separation between the equipment and receiver. -- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -- Consult the dealer or an experienced radio/TV technician for help. The SAR limit of USA (FCC) is 1.6 W/kg averaged over one gram of tissue. Device types A920 (FCC ID: V5PA920) has also been tested against this SAR limit. The highest reported SAR values for body-worn accessory is 0.76 W/kg. The Max simultaneous SAR is 0.91W/kg. This device was tested for typical body-worn operations with the back of the pos terminal kept 10mm from the body. To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 10mm separation distance between the user's body and the back of the pos terminal The use of belt clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Cet appareil est conforme à la Partie 15 des règlements de la FCC et aux normes RSS de l’Industrie du Canada. Son fonctionnement est soumis aux deux conditions suivantes : (1) cet appareil ne doit pas causer des interférences nuisibles, et (2) cet appareil doit accepter toute interférence reçue, y compris les interférences qui peuvent provoquer un fonctionnement indésirable. Le fabricant n'est pas responsable des toutes interférences radio ou télévision causées par des modifications non autorisées apportées à cet appareil. De telles modifications peuvent empêcher l’utilisateur d’utiliser l'appareil. Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de modèle s'il fait partie du matériel de catégorie II) a été approuvé par Industrie Canada pour fonctionner avec les types d'antenne énumérés ci‑dessous et ayant un gain admissible maximal. Les types d'antenne non inclus dans cette liste, et dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de l'émetteur. La limite DAS de l’Industrie du Canada est de 1,6 W / kg en moyenne par gramme de tissu. Les types de périphériques A920 (IC No.: 11689A-A920) été également testécontre ces valeurs. Les valeurs SAR les plus élevées pour l'accessoire porté par le corps sont de 0.76 W / kg. La SAR maximale simultanée est de 0.91 W / kg. Ce dispositif a été testé pour les opérations typiques en utilisant l’accessoire porté sur le corps avec la partie postérieure du combiné gardé à 10mm du corps. Afin de maintenir la conformité aux exigences de la RSS‐102, utilisez des accessoires qui maintiennent une distance de séparation de 10 mm entre le corps de l'utilisateur et la partie postérieure du combiné. L'utilisation de pinces de ceinture, étuis et accessoires similaires ne doivent pas contenir de composants métalliques dans son ensemble. L'utilisation d'accessoires qui ne satisfont pas à ces exigences ne peut pas se conformer aux exigences de la RSS‐102, et devrait êtreévitée.
Source Exif Data:
File Type : PDF File Type Extension : pdf MIME Type : application/pdf PDF Version : 1.6 Linearized : No Author : wangd(王丹/深圳） Create Date : D:20161026030343Z Modify Date : 0000:01:01 00:00:00 Has XFA : No XMP Toolkit : Adobe XMP Core 4.2.1-c041 52.342996, 2008/05/07-20:48:00 Format : application/pdf Creator : wangd(王丹/深圳） Title : A920英文说明书 Creation Date--Text : Mod Date--Text : Producer : Corel PDF Engine Version 14.0.0.653 Creator Tool : CorelDRAW Metadata Date : 2017:01:04 09:12:29+08:00 Document ID : uuid:77f4e8b2-7521-43d5-a1b0-f06ad5dccb15 Instance ID : uuid:b36f5806-5271-4f02-b4bc-678716d2d550 Page Count : 4EXIF Metadata provided by EXIF.tools