PAX Technology Q20 POS Terminal User Manual

Download:
Mirror Download [FCC.gov]
Document ID	3517321
Application ID	+ehqhqFMNCAGMSLeMhBzRA==
Document Description	User Manual
Short Term Confidential	Yes
Permanent Confidential	No
Supercede	No
Document Type	User Manual
Display Format	Adobe Acrobat PDF - pdf
Filesize	5.65kB (70658 bits)
Date Submitted	2017-08-18 00:00:00
Date Available	2018-02-14 00:00:00
Creation Date	2017-07-27 09:30:45
Producing Software	Adobe PDF Library 15.0
Document Lastmod	2017-07-27 09:37:41
Document Title	User Manual
Document Creator	Acrobat PDFMaker 15 Word 版
Document Author:	dongjl

Q20 Instruction Manual
1.Instructions
Q20 posterminal that include a default communication module come standard with
USB2.0.An optional wifi&BTcommunication moduleis available.
1）Magnetic Stripe Card
Put magnetic stripe side of magnetic card towards device interior, backwardswipe the card
with a steady speed during through IC card slot slot. (Only Support Backward swiping)
2）IC Card
Put IC card chip side upward, push-in IC card slot and to bottom.
3）Tap contactless card.
Put the contactless card into the sensing areaat the top of LCD.
Support NFC
2. Installation and Usage Tips
1）Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
2）Forbid non-professional to repair the terminal.
3）Before insert the card, please check internal and around of IC card slot. when you foundsome
suspicious objects , must reportto related administrator.
3. Password Entering Tips:
It is highly recommended to enter password as following ways:
1）Set up peep shields.Enter password with shield by the structures of cashierdesk;
2）Place the POS terminal at an appropriate angle and make sure it is difficult to peer the password.
For example, the POSwas installed above the movable bracket.
3）In enter password perspective, avoid surrounding video surveillance;
4）Pastetext instructions to remind the customers to shelter with body or palm when enter
password.
5）Merchants can also choose other ways to protect the customer input password.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna.



Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Caution:
 Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
 This transmitter must not be co-located or operating in conjunction with any other antenna
or transmitter.






This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
1) this device may not cause interference, and
2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes:
1) l'appareil ne doit pas produire de brouillage, et
2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromettre le fonctionnement.
This device and its antenna(s) must not be co-located or operating in conjunction with any
other antenna or transmitter, except tested built-in radios.
Cet appareil et son antenne ne doivent pas être situés ou fonctionner en conjonction avec une
autre antenne ou un autre émetteur, exception faites des radios intégrées qui ont été testées.
The County Code Selection feature is disabled for products marketed in the US/ Canada.
La fonction de sélection de l'indicatif du pays est désactivée pour les produits
commercialisés aux États-Unis et au Canada.
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
Déclaration d'exposition aux radiations:
Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un
environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20
cm de distance entre la source de rayonnement et votre corps.

---

Source Exif Data:

EXIF Metadata provided by EXIF.tools